Problème de gravure , étapes 5 et 6 avec message d'erreur suivant:
Interruption de la gravure en raison de l'erreur suivante/ erreur interne au cours de l'édition
Comment puis-je résoudre ce problème ?
Ci-dessous rapport:
-------------------------- 08/05/2010 07:54:28 --------------------------
08/05/2010 07:54:28.250: DLLAV32.DLL loaded, all entry points available
08/05/2010 07:54:28.265: AVSDK MsgCbFunc registered
08/05/2010 07:54:28.265: AVSDK: StatCbFunc registered
08/05/2010 07:54:28.375: AVSDK Version 8.0.179
08/05/2010 07:54:28.375: ------------ Reading Device Info ----------------
08/05/2010 07:54:28.375: AVSDK: 1 device(s) found
08/05/2010 07:54:28.375: Adapter=1 ID=0 LUN=0 F:BENQ DVD DD DW1640 Revision:BSHB
08/05/2010 07:54:28.375: AVSDK: 1 record device(s) available
08/05/2010 07:54:28.375: ------------ done ----------------
-------------------------- 08/05/2010 10:26:01 --------------------------
08/05/2010 10:26:01.031: DLLAV32.DLL loaded, all entry points available
08/05/2010 10:26:01.031: AVSDK MsgCbFunc registered
08/05/2010 10:26:01.031: AVSDK: StatCbFunc registered
08/05/2010 10:26:01.156: AVSDK Version 8.0.179
08/05/2010 10:26:01.156: ------------ Reading Device Info ----------------
08/05/2010 10:26:01.156: AVSDK: 1 device(s) found
08/05/2010 10:26:01.156: Adapter=1 ID=0 LUN=0 F:BENQ DVD DD DW1640 Revision:BSHB
08/05/2010 10:26:01.171: AVSDK: 1 record device(s) available
08/05/2010 10:26:01.171: ------------ done ----------------
08/05/2010 10:26:01.171: setting no speed limit
08/05/2010 10:26:01.171: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
08/05/2010 10:28:34.515: setting no speed limit
08/05/2010 10:29:34.609: Open Project: Move_Zone -- dvd project 2010-05-08
08/05/2010 10:29:34.609: VideoMode: PAL Temp Dir: D:\Magix DVD 8\Disc Images\
08/05/2010 10:29:34.609: dll version 8.0.2.1
08/05/2010 10:29:34.609: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
08/05/2010 10:29:34.625: EstimateLayerSplitPoint()...
08/05/2010 10:29:34.625: Splitpunkt 4271833088 auf Disk mit Größe 154501120
08/05/2010 10:29:34.625: Title an Stelle 0, Länge 131072, Typ 0
08/05/2010 10:29:34.625: Title an Stelle 131072, Länge 131072, Typ 0
08/05/2010 10:29:34.625: Title an Stelle 262144, Länge 154238976, Typ 1
08/05/2010 10:29:34.625: ... Split möglich nach aktuellem Title, -> Abbruch
08/05/2010 10:29:34.671: Step 1 of 6, Codage du film 1...
08/05/2010 10:31:27.250: Step 1 done
08/05/2010 10:31:27.250: Step 2 of 6, Codage du menu du film...
08/05/2010 10:34:00.062: Step 2 done
08/05/2010 10:34:00.062: Step 3 of 6, Codage du menu de chapitres 1...
08/05/2010 10:34:01.078: Step 3 done
08/05/2010 10:34:01.093: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Move_Zone\VTS_01_1.VOB
08/05/2010 10:34:01.093: Step 4 of 6, Création d'une image disque...
08/05/2010 10:34:06.750: Step 4 done
08/05/2010 10:34:12.390: Step 5 of 6
08/05/2010 10:34:12.390: Step 5 done
08/05/2010 10:34:12.390: ------------ InitializeBurningProcess Point ----------------
08/05/2010 10:34:12.484: setting PoINT cache size to 16777216l
08/05/2010 10:34:12.484: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
08/05/2010 10:34:12.484: Booktype: don't care
08/05/2010 10:34:12.484: setting write speed to 3324000 bytes/sec
08/05/2010 10:34:12.484: this equals 2,400000x DVD / 18,843538x CD Speed
08/05/2010 10:34:12.484: ------------ done: succeeded ----------------
08/05/2010 10:34:12.484: ------------ CreateAPIProject ----------------
08/05/2010 10:34:12.484: Step 6 of 6
08/05/2010 10:34:12.484: creating DVD project in prepfile mode...
08/05/2010 10:34:12.500: create volume... OK
08/05/2010 10:34:12.500: verify option OFF
08/05/2010 10:34:12.500: adding file "D:\Magix DVD 8\Disc Images\DVD Image Move_Zone\VIDEO_TS.IFO"
08/05/2010 10:34:12.500: adding file "D:\Magix DVD 8\Disc Images\DVD Image Move_Zone\VIDEO_TS.VOB"
08/05/2010 10:34:12.500: adding file "D:\Magix DVD 8\Disc Images\DVD Image Move_Zone\VTS_01_1.VOB"
08/05/2010 10:34:12.500: adding file "D:\Magix DVD 8\Disc Images\DVD Image Move_Zone\VTS_01_0.IFO"
08/05/2010 10:34:12.500: adding file "D:\Magix DVD 8\Disc Images\DVD Image Move_Zone\VTS_01_0.VOB"
08/05/2010 10:34:12.500: Step 6 done
08/05/2010 10:34:12.515: ------------ done ----------------
08/05/2010 10:34:12.515: ------------ BurnToDisc ----------------
08/05/2010 10:34:12.515: time:
08/05/2010 10:34:12.515: Step 6 of 6
08/05/2010 10:34:12.515: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
08/05/2010 10:34:12.531: Booktype: don't care
08/05/2010 10:34:12.531: setting write speed to 3324000 bytes/sec
08/05/2010 10:34:12.531: this equals 2,400000x DVD / 18,843538x CD Speed
08/05/2010 10:34:12.531: Check on previously direct recorded session...OK
08/05/2010 10:34:12.593: AVSDK Message - INFO: :Recording volume ...
08/05/2010 10:34:12.593: AVSDK Message - INFO: :Recording -> formatting disc to prepare recording ...
08/05/2010 10:34:22.609: AVSDK Status - Begin operation Formatting disc
08/05/2010 10:34:22.609: time:
08/05/2010 10:34:28.187: AVSDK Status - End operation Formatting disc
08/05/2010 10:34:28.546: AVSDK Status - Begin operation Recording 85866 sectors/frames
08/05/2010 10:34:28.546: time:
08/05/2010 10:34:28.546: AVSDK Message - INFO: :Recording -> writing data ...
08/05/2010 10:34:28.625: wrote LeadIn, start DataCopy
08/05/2010 10:34:28.625: time:
08/05/2010 10:35:17.015: writing leadout and closing disc
08/05/2010 10:35:17.015: time:
08/05/2010 10:35:17.015: writing leadout and closing disc
08/05/2010 10:35:17.015: time:
08/05/2010 10:35:34.265: writing leadout and closing disc
08/05/2010 10:35:34.265: time:
08/05/2010 10:35:34.265: AVSDK Message - INFO: :Recording -> finalising disc ...
08/05/2010 10:35:45.031: AVSDK Status - End operation Recording 85866 sectors/frames
08/05/2010 10:35:45.031: AVSDK Message - INFO: :Recording successfully completed
08/05/2010 10:35:46.390: Step 6 done
08/05/2010 10:35:46.390: ------------ done ----------------
08/05/2010 10:35:46.390: time:
08/05/2010 10:36:59.218: WM_DEVICECHANGE( VOLUMECHANGE ) for drive f:
08/05/2010 10:36:59.218: DEVICE REMOVAL
-------------------------- 14/07/2010 22:43:38 --------------------------
14/07/2010 22:43:38.687: DLLAV32.DLL loaded, all entry points available
14/07/2010 22:43:38.687: AVSDK MsgCbFunc registered
14/07/2010 22:43:38.687: AVSDK: StatCbFunc registered
14/07/2010 22:43:38.812: AVSDK Version 8.1.186
14/07/2010 22:43:38.812: ------------ Reading Device Info ----------------
14/07/2010 22:43:38.812: AVSDK: 1 device(s) found
14/07/2010 22:43:38.812: Adapter=1 ID=0 LUN=0 F:BENQ DVD DD DW1640 Revision:BSHB
14/07/2010 22:43:38.828: AVSDK: 1 record device(s) available
14/07/2010 22:43:38.828: ------------ done ----------------
14/07/2010 22:43:40.218: setting no speed limit
14/07/2010 22:43:40.218: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
14/07/2010 22:43:40.328: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
14/07/2010 22:43:40.328: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
14/07/2010 22:43:40.328: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
14/07/2010 22:45:55.875: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
14/07/2010 22:45:55.890: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
14/07/2010 22:45:55.890: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
14/07/2010 22:45:57.968: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
14/07/2010 22:45:57.968: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
14/07/2010 22:45:57.968: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
14/07/2010 22:45:57.968: Open Project: Fast_and_furious_4 -- dvd project 2010-07-14
14/07/2010 22:45:57.968: VideoMode: PAL Temp Dir: D:\Magix DVD 8\Disc Images\
14/07/2010 22:45:57.968: dll version 8.0.3.0
14/07/2010 22:45:57.968: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
14/07/2010 22:45:57.984: EstimateLayerSplitPoint()...
14/07/2010 22:45:57.984: Splitpunkt 4271833088 auf Disk mit Größe 4700536832
14/07/2010 22:45:57.984: Title an Stelle 0, Länge 131072, Typ 0
14/07/2010 22:45:57.984: Title an Stelle 131072, Länge 131072, Typ 0
14/07/2010 22:45:57.984: Title an Stelle 262144, Länge 4700274688, Typ 1
14/07/2010 22:45:57.984: Split berechnen...
14/07/2010 22:45:57.984: Title an Stelle 0, Länge 131072, Typ 0
14/07/2010 22:45:57.984: Title an Stelle 131072, Länge 131072, Typ 0
14/07/2010 22:45:57.984: Title an Stelle 262144, Länge 4700274688, Typ 1
14/07/2010 22:45:57.984: Split in HMOVIE 5ba5008, Position in Datei 4271570944
14/07/2010 22:45:58.000: Step 1 of 6, Codage du film 1...
14/07/2010 22:45:58.000: Eintragen des Splitpunktes 4271570944 bei ConvertMovie(5ba5008)
15/07/2010 01:16:11.812: Step 1 done
15/07/2010 01:16:11.875: Step 2 of 6, Codage du menu du film...
15/07/2010 01:17:18.125: Step 2 done
15/07/2010 01:17:18.125: Step 3 of 6, Codage du menu de chapitres 1...
15/07/2010 01:17:18.125: Step 3 done
15/07/2010 01:17:18.140: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_1.VOB
15/07/2010 01:17:18.140: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_2.VOB
15/07/2010 01:17:18.140: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_3.VOB
15/07/2010 01:17:18.140: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_4.VOB
15/07/2010 01:17:18.140: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_5.VOB
15/07/2010 01:17:18.140: Step 4 of 6, Création d'une image disque...
15/07/2010 01:21:57.890: Step 4 done
15/07/2010 01:21:57.968: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
15/07/2010 01:21:57.968: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
15/07/2010 01:21:57.968: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
15/07/2010 03:44:50.218: WM_DEVICECHANGE( VOLUMECHANGE ) for drive f:
15/07/2010 03:44:50.234: DEVICE ARRIVED
15/07/2010 03:44:58.359: Step 5 of 6
15/07/2010 03:44:58.359: Step 5 done
15/07/2010 03:44:58.375: ------------ InitializeBurningProcess Point ----------------
15/07/2010 03:44:58.515: setting PoINT cache size to 16777216l
15/07/2010 03:44:58.515: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
15/07/2010 03:44:58.515: Booktype: don't care
15/07/2010 03:44:58.515: setting write speed to 3324000 bytes/sec
15/07/2010 03:44:58.515: this equals 2,400000x DVD / 18,843538x CD Speed
15/07/2010 03:44:58.515: ------------ done: succeeded ----------------
15/07/2010 03:44:58.515: ------------ CreateAPIProject ----------------
15/07/2010 03:44:58.531: Step 6 of 6
15/07/2010 03:44:58.531: creating DVD project in prepfile mode...
15/07/2010 03:44:58.531: create volume... OK
15/07/2010 03:44:58.531: verify option OFF
15/07/2010 03:44:58.531: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VIDEO_TS.IFO"
15/07/2010 03:44:58.531: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VIDEO_TS.VOB"
15/07/2010 03:44:58.531: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_1.VOB"
15/07/2010 03:44:58.546: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_2.VOB"
15/07/2010 03:44:58.546: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_3.VOB"
15/07/2010 03:44:58.546: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_4.VOB"
15/07/2010 03:44:58.546: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_5.VOB"
15/07/2010 03:44:58.546: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_0.IFO"
15/07/2010 03:44:58.546: Step 6 done
15/07/2010 03:44:58.546: ------------ done ----------------
15/07/2010 03:44:58.546: ------------ BurnToDisc ----------------
15/07/2010 03:44:58.546: time:
15/07/2010 03:44:58.562: Step 6 of 6
15/07/2010 03:44:58.562: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
15/07/2010 03:44:58.562: Booktype: don't care
15/07/2010 03:44:58.562: setting write speed to 3324000 bytes/sec
15/07/2010 03:44:58.562: this equals 2,400000x DVD / 18,843538x CD Speed
15/07/2010 03:44:58.562: Check on previously direct recorded session...OK
15/07/2010 03:44:58.671: AVSDK Message - INFO: :Recording volume ...
15/07/2010 03:44:58.671: AVSDK Message - INFO: :Recording -> formatting disc to prepare recording ...
15/07/2010 03:44:58.718: AVSDK Status - Begin operation Recording 2295104 sectors/frames
15/07/2010 03:44:58.718: time:
15/07/2010 03:44:58.718: AVSDK Message - INFO: :Recording -> writing data ...
15/07/2010 03:44:58.718: AVSDK Message - ERROR: :Cannot format track -> illegal request or bad parameter
15/07/2010 03:44:58.718: AVSDK Message - ERROR: :Bad request: Bad driver parameter
15/07/2010 03:44:58.828: AVSDK Status - End operation Recording 2295104 sectors/frames
15/07/2010 03:44:58.828: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
15/07/2010 03:44:58.828: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 4 - invalid parameter given !!!
15/07/2010 03:44:58.828: Step 6 done
15/07/2010 03:44:58.828: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 233 - invalid parameter given !!!
15/07/2010 03:44:58.828: ------------ done ----------------
15/07/2010 03:44:58.828: time:
15/07/2010 03:44:58.828: project burning failed
15/07/2010 03:44:58.828: !!! DBK error in CBurnDevSupport::BurnProject(): 233 - invalid parameter given !!!
15/07/2010 03:44:58.843: !!! DBK error in BurnProject: 233 - invalid parameter given !!!
15/07/2010 03:45:20.781: WM_DEVICECHANGE( VOLUMECHANGE ) for drive f:
15/07/2010 03:45:20.781: DEVICE REMOVAL
15/07/2010 03:46:00.781: WM_DEVICECHANGE( VOLUMECHANGE ) for drive f:
15/07/2010 03:46:00.781: DEVICE ARRIVED
15/07/2010 03:49:36.703: Error: Call to CheckHDAndDiscSpaceForProject() failed
15/07/2010 03:56:36.531: Open Project: Fast_and_furious_4 -- dvd project 2010-07-15
15/07/2010 03:56:36.531: VideoMode: PAL Temp Dir: D:\Magix DVD 8\Disc Images\
15/07/2010 03:56:36.531: dll version 8.0.3.0
15/07/2010 03:56:36.531: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
15/07/2010 03:56:36.531: EstimateLayerSplitPoint()...
15/07/2010 03:56:36.546: Splitpunkt 4271833088 auf Disk mit Größe 4700536832
15/07/2010 03:56:36.546: Title an Stelle 0, Länge 131072, Typ 0
15/07/2010 03:56:36.546: Title an Stelle 131072, Länge 131072, Typ 0
15/07/2010 03:56:36.546: Title an Stelle 262144, Länge 4700274688, Typ 1
15/07/2010 03:56:36.546: Split berechnen...
15/07/2010 03:56:36.546: Title an Stelle 0, Länge 131072, Typ 0
15/07/2010 03:56:36.546: Title an Stelle 131072, Länge 131072, Typ 0
15/07/2010 03:56:36.546: Title an Stelle 262144, Länge 4700274688, Typ 1
15/07/2010 03:56:36.546: Split in HMOVIE 5ba5008, Position in Datei 4271570944
15/07/2010 03:57:01.687: Step 1 of 6, Codage du film 1...
15/07/2010 03:57:01.687: Eintragen des Splitpunktes 4271570944 bei ConvertMovie(5ba5008)
15/07/2010 03:57:01.687: Step 1 done
15/07/2010 03:57:01.703: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_1.VOB
15/07/2010 03:57:01.703: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_2.VOB
15/07/2010 03:57:01.703: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_3.VOB
15/07/2010 03:57:01.703: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_4.VOB
15/07/2010 03:57:01.703: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_5.VOB
15/07/2010 03:57:01.703: Step 2 of 6, Création d'une image disque...
15/07/2010 03:57:01.703: Step 2 done
15/07/2010 03:57:04.156: Step 3 of 6
15/07/2010 03:57:04.156: Step 3 done
15/07/2010 03:57:04.156: ------------ InitializeBurningProcess Point ----------------
15/07/2010 03:57:04.281: setting PoINT cache size to 16777216l
15/07/2010 03:57:04.281: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
15/07/2010 03:57:04.281: Booktype: don't care
15/07/2010 03:57:04.296: setting write speed to 3324000 bytes/sec
15/07/2010 03:57:04.296: this equals 2,400000x DVD / 18,843538x CD Speed
15/07/2010 03:57:04.296: ------------ done: succeeded ----------------
15/07/2010 03:57:04.296: ------------ CreateAPIProject ----------------
15/07/2010 03:57:04.296: Step 4 of 6
15/07/2010 03:57:04.296: creating DVD project in prepfile mode...
15/07/2010 03:57:04.296: create volume... OK
15/07/2010 03:57:04.296: verify option OFF
15/07/2010 03:57:04.296: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VIDEO_TS.IFO"
15/07/2010 03:57:04.312: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VIDEO_TS.VOB"
15/07/2010 03:57:04.312: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_1.VOB"
15/07/2010 03:57:04.312: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_2.VOB"
15/07/2010 03:57:04.312: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_3.VOB"
15/07/2010 03:57:04.312: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_4.VOB"
15/07/2010 03:57:04.312: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_5.VOB"
15/07/2010 03:57:04.312: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_0.IFO"
15/07/2010 03:57:04.312: Step 4 done
15/07/2010 03:57:04.312: ------------ done ----------------
15/07/2010 03:57:04.312: ------------ BurnToDisc ----------------
15/07/2010 03:57:04.312: time:
15/07/2010 03:57:04.312: Step 5 of 6
15/07/2010 03:57:04.328: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
15/07/2010 03:57:04.328: Booktype: don't care
15/07/2010 03:57:04.328: setting write speed to 3324000 bytes/sec
15/07/2010 03:57:04.328: this equals 2,400000x DVD / 18,843538x CD Speed
15/07/2010 03:57:04.328: Check on previously direct recorded session...OK
15/07/2010 03:57:04.421: AVSDK Message - INFO: :Recording volume ...
15/07/2010 03:57:04.421: AVSDK Message - INFO: :Recording -> formatting disc to prepare recording ...
15/07/2010 03:57:04.468: AVSDK Status - Begin operation Recording 2295104 sectors/frames
15/07/2010 03:57:04.468: time:
15/07/2010 03:57:04.468: AVSDK Message - INFO: :Recording -> writing data ...
15/07/2010 03:57:04.468: AVSDK Message - ERROR: :Cannot format track -> illegal request or bad parameter
15/07/2010 03:57:04.468: AVSDK Message - ERROR: :Bad request: Bad driver parameter
15/07/2010 03:57:04.562: AVSDK Status - End operation Recording 2295104 sectors/frames
15/07/2010 03:57:04.562: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
15/07/2010 03:57:04.562: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 4 - invalid parameter given !!!
15/07/2010 03:57:04.562: Step 5 done
15/07/2010 03:57:04.562: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 233 - invalid parameter given !!!
15/07/2010 03:57:04.562: ------------ done ----------------
15/07/2010 03:57:04.562: time:
15/07/2010 03:57:04.578: project burning failed
15/07/2010 03:57:04.578: !!! DBK error in CBurnDevSupport::BurnProject(): 233 - invalid parameter given !!!
15/07/2010 03:57:04.578: !!! DBK error in BurnProject: 233 - invalid parameter given !!!
15/07/2010 03:57:21.781: WM_DEVICECHANGE( VOLUMECHANGE ) for drive f:
15/07/2010 03:57:21.781: DEVICE REMOVAL
15/07/2010 03:58:00.781: WM_DEVICECHANGE( VOLUMECHANGE ) for drive f:
15/07/2010 03:58:00.781: DEVICE ARRIVED
15/07/2010 03:59:39.968: Open Project: Fast_and_furious_4 -- dvd project 2010-07-15
15/07/2010 03:59:39.968: VideoMode: PAL Temp Dir: D:\Magix DVD 8\Disc Images\
15/07/2010 03:59:39.968: dll version 8.0.3.0
15/07/2010 03:59:39.968: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
15/07/2010 03:59:39.968: EstimateLayerSplitPoint()...
15/07/2010 03:59:39.984: Splitpunkt 4271833088 auf Disk mit Größe 4700536832
15/07/2010 03:59:39.984: Title an Stelle 0, Länge 131072, Typ 0
15/07/2010 03:59:39.984: Title an Stelle 131072, Länge 131072, Typ 0
15/07/2010 03:59:39.984: Title an Stelle 262144, Länge 4700274688, Typ 1
15/07/2010 03:59:39.984: Split berechnen...
15/07/2010 03:59:39.984: Title an Stelle 0, Länge 131072, Typ 0
15/07/2010 03:59:39.984: Title an Stelle 131072, Länge 131072, Typ 0
15/07/2010 03:59:39.984: Title an Stelle 262144, Länge 4700274688, Typ 1
15/07/2010 03:59:39.984: Split in HMOVIE 5ba5008, Position in Datei 4271570944
15/07/2010 03:59:42.656: Step 1 of 6, Codage du film 1...
15/07/2010 03:59:42.656: Eintragen des Splitpunktes 4271570944 bei ConvertMovie(5ba5008)
15/07/2010 03:59:42.656: Step 1 done
15/07/2010 03:59:42.671: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_1.VOB
15/07/2010 03:59:42.671: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_2.VOB
15/07/2010 03:59:42.671: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_3.VOB
15/07/2010 03:59:42.671: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_4.VOB
15/07/2010 03:59:42.671: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_5.VOB
15/07/2010 03:59:42.671: Step 2 of 6, Création d'une image disque...
15/07/2010 03:59:42.671: Step 2 done
15/07/2010 03:59:45.062: Step 3 of 6
15/07/2010 03:59:45.078: Step 3 done
15/07/2010 03:59:45.078: ------------ InitializeBurningProcess Point ----------------
15/07/2010 03:59:45.203: setting PoINT cache size to 16777216l
15/07/2010 03:59:45.203: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
15/07/2010 03:59:45.203: Booktype: don't care
15/07/2010 03:59:45.218: setting write speed to 3324000 bytes/sec
15/07/2010 03:59:45.218: this equals 2,400000x DVD / 18,843538x CD Speed
15/07/2010 03:59:45.218: ------------ done: succeeded ----------------
15/07/2010 03:59:45.218: ------------ CreateAPIProject ----------------
15/07/2010 03:59:45.218: Step 4 of 6
15/07/2010 03:59:45.218: creating DVD project in prepfile mode...
15/07/2010 03:59:45.218: create volume... OK
15/07/2010 03:59:45.218: verify option OFF
15/07/2010 03:59:45.218: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VIDEO_TS.IFO"
15/07/2010 03:59:45.218: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VIDEO_TS.VOB"
15/07/2010 03:59:45.218: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_1.VOB"
15/07/2010 03:59:45.234: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_2.VOB"
15/07/2010 03:59:45.234: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_3.VOB"
15/07/2010 03:59:45.234: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_4.VOB"
15/07/2010 03:59:45.234: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_5.VOB"
15/07/2010 03:59:45.234: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_0.IFO"
15/07/2010 03:59:45.234: Step 4 done
15/07/2010 03:59:45.234: ------------ done ----------------
15/07/2010 03:59:45.234: ------------ BurnToDisc ----------------
15/07/2010 03:59:45.234: time:
15/07/2010 03:59:45.234: Step 5 of 6
15/07/2010 03:59:45.234: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
15/07/2010 03:59:45.234: Booktype: don't care
15/07/2010 03:59:45.234: setting write speed to 3324000 bytes/sec
15/07/2010 03:59:45.234: this equals 2,400000x DVD / 18,843538x CD Speed
15/07/2010 03:59:45.250: Check on previously direct recorded session...OK
15/07/2010 03:59:45.343: AVSDK Message - INFO: :Recording volume ...
15/07/2010 03:59:45.343: AVSDK Message - INFO: :Recording -> formatting disc to prepare recording ...
15/07/2010 03:59:45.390: AVSDK Status - Begin operation Recording 2295104 sectors/frames
15/07/2010 03:59:45.390: time:
15/07/2010 03:59:45.390: AVSDK Message - INFO: :Recording -> writing data ...
15/07/2010 03:59:45.390: AVSDK Message - ERROR: :Cannot format track -> illegal request or bad parameter
15/07/2010 03:59:45.390: AVSDK Message - ERROR: :Bad request: Bad driver parameter
15/07/2010 03:59:45.484: AVSDK Status - End operation Recording 2295104 sectors/frames
15/07/2010 03:59:45.484: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
15/07/2010 03:59:45.484: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 4 - invalid parameter given !!!
15/07/2010 03:59:45.484: Step 5 done
15/07/2010 03:59:45.500: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 233 - invalid parameter given !!!
15/07/2010 03:59:45.500: ------------ done ----------------
15/07/2010 03:59:45.500: time:
15/07/2010 03:59:45.500: project burning failed
15/07/2010 03:59:45.500: !!! DBK error in CBurnDevSupport::BurnProject(): 233 - invalid parameter given !!!
15/07/2010 03:59:45.500: !!! DBK error in BurnProject: 233 - invalid parameter given !!!
15/07/2010 04:00:00.781: WM_DEVICECHANGE( VOLUMECHANGE ) for drive f:
15/07/2010 04:00:00.781: DEVICE REMOVAL
15/07/2010 04:00:38.921: WM_DEVICECHANGE( VOLUMECHANGE ) for drive f:
15/07/2010 04:00:38.921: DEVICE ARRIVED
15/07/2010 04:00:38.921: AVSDK Message - ERROR: :Cannot open drive -> error code 14
15/07/2010 04:00:38.921: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
15/07/2010 04:00:38.921: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 203 - burn support - open device failed !!!
15/07/2010 04:00:41.328: Open Project: Fast_and_furious_4 -- dvd project 2010-07-15
15/07/2010 04:00:41.328: VideoMode: PAL Temp Dir: D:\Magix DVD 8\Disc Images\
15/07/2010 04:00:41.328: dll version 8.0.3.0
15/07/2010 04:00:41.343: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
15/07/2010 04:00:41.343: EstimateLayerSplitPoint()...
15/07/2010 04:00:41.343: Splitpunkt 4271833088 auf Disk mit Größe 4700536832
15/07/2010 04:00:41.343: Title an Stelle 0, Länge 131072, Typ 0
15/07/2010 04:00:41.343: Title an Stelle 131072, Länge 131072, Typ 0
15/07/2010 04:00:41.343: Title an Stelle 262144, Länge 4700274688, Typ 1
15/07/2010 04:00:41.343: Split berechnen...
15/07/2010 04:00:41.343: Title an Stelle 0, Länge 131072, Typ 0
15/07/2010 04:00:41.343: Title an Stelle 131072, Länge 131072, Typ 0
15/07/2010 04:00:41.343: Title an Stelle 262144, Länge 4700274688, Typ 1
15/07/2010 04:00:41.343: Split in HMOVIE 5ba5008, Position in Datei 4271570944
15/07/2010 04:01:03.859: Step 1 of 6, Codage du film 1...
15/07/2010 04:01:03.859: Eintragen des Splitpunktes 4271570944 bei ConvertMovie(5ba5008)
15/07/2010 04:01:03.859: Step 1 done
15/07/2010 04:01:03.906: Step 2 of 6, Codage du menu du film...
15/07/2010 04:02:08.546: Step 2 done
15/07/2010 04:02:08.546: Step 3 of 6, Codage du menu de chapitres 1...
15/07/2010 04:02:08.546: Step 3 done
15/07/2010 04:02:08.562: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_1.VOB
15/07/2010 04:02:08.562: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_2.VOB
15/07/2010 04:02:08.562: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_3.VOB
15/07/2010 04:02:08.562: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_4.VOB
15/07/2010 04:02:08.562: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_5.VOB
15/07/2010 04:02:08.562: Step 4 of 6, Création d'une image disque...
15/07/2010 04:07:07.281: Step 4 done
15/07/2010 04:07:12.718: Step 5 of 6
15/07/2010 04:07:12.718: Step 5 done
15/07/2010 04:07:12.734: ------------ InitializeBurningProcess Point ----------------
15/07/2010 04:07:12.859: setting PoINT cache size to 16777216l
15/07/2010 04:07:12.859: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
15/07/2010 04:07:12.859: Booktype: don't care
15/07/2010 04:07:12.859: setting write speed to 3324000 bytes/sec
15/07/2010 04:07:12.859: this equals 2,400000x DVD / 18,843538x CD Speed
15/07/2010 04:07:12.859: ------------ done: succeeded ----------------
15/07/2010 04:07:12.859: ------------ CreateAPIProject ----------------
15/07/2010 04:07:12.859: Step 6 of 6
15/07/2010 04:07:12.875: creating DVD project in prepfile mode...
15/07/2010 04:07:12.875: create volume... OK
15/07/2010 04:07:12.875: verify option OFF
15/07/2010 04:07:12.875: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VIDEO_TS.IFO"
15/07/2010 04:07:12.875: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VIDEO_TS.VOB"
15/07/2010 04:07:12.875: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_1.VOB"
15/07/2010 04:07:12.875: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_2.VOB"
15/07/2010 04:07:12.875: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_3.VOB"
15/07/2010 04:07:12.875: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_4.VOB"
15/07/2010 04:07:12.875: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_5.VOB"
15/07/2010 04:07:12.890: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_0.IFO"
15/07/2010 04:07:12.890: Step 6 done
15/07/2010 04:07:12.890: ------------ done ----------------
15/07/2010 04:07:12.890: ------------ BurnToDisc ----------------
15/07/2010 04:07:12.890: time:
15/07/2010 04:07:12.890: Step 6 of 6
15/07/2010 04:07:12.890: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
15/07/2010 04:07:12.890: Booktype: don't care
15/07/2010 04:07:12.890: setting write speed to 3324000 bytes/sec
15/07/2010 04:07:12.890: this equals 2,400000x DVD / 18,843538x CD Speed
15/07/2010 04:07:12.890: Check on previously direct recorded session...OK
15/07/2010 04:07:12.984: AVSDK Message - INFO: :Recording volume ...
15/07/2010 04:07:12.984: AVSDK Message - INFO: :Recording -> formatting disc to prepare recording ...
15/07/2010 04:07:13.031: AVSDK Status - Begin operation Recording 2295104 sectors/frames
15/07/2010 04:07:13.031: time:
15/07/2010 04:07:13.046: AVSDK Message - INFO: :Recording -> writing data ...
15/07/2010 04:07:13.046: AVSDK Message - ERROR: :Cannot format track -> illegal request or bad parameter
15/07/2010 04:07:13.046: AVSDK Message - ERROR: :Bad request: Bad driver parameter
15/07/2010 04:07:13.140: AVSDK Status - End operation Recording 2295104 sectors/frames
15/07/2010 04:07:13.140: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
15/07/2010 04:07:13.140: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 4 - invalid parameter given !!!
15/07/2010 04:07:13.140: Step 6 done
15/07/2010 04:07:13.140: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 233 - invalid parameter given !!!
15/07/2010 04:07:13.140: ------------ done ----------------
15/07/2010 04:07:13.140: time:
15/07/2010 04:07:13.140: project burning failed
15/07/2010 04:07:13.140: !!! DBK error in CBurnDevSupport::BurnProject(): 233 - invalid parameter given !!!
15/07/2010 04:07:13.156: !!! DBK error in BurnProject: 233 - invalid parameter given !!!
15/07/2010 04:07:28.781: WM_DEVICECHANGE( VOLUMECHANGE ) for drive f:
15/07/2010 04:07:28.781: DEVICE REMOVAL
15/07/2010 04:08:10.781: WM_DEVICECHANGE( VOLUMECHANGE ) for drive f:
15/07/2010 04:08:10.781: DEVICE ARRIVED
15/07/2010 04:15:13.546: setting no speed limit
15/07/2010 04:16:04.546: Open Project: Fast_and_furious_4 -- dvd project 2010-07-15
15/07/2010 04:16:04.546: VideoMode: PAL Temp Dir: D:\Magix DVD 8\Disc Images\
15/07/2010 04:16:04.546: dll version 8.0.3.0
15/07/2010 04:16:04.546: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
15/07/2010 04:16:04.546: EstimateLayerSplitPoint()...
15/07/2010 04:16:04.546: Splitpunkt 4271833088 auf Disk mit Größe 4700536832
15/07/2010 04:16:04.546: Title an Stelle 0, Länge 131072, Typ 0
15/07/2010 04:16:04.546: Title an Stelle 131072, Länge 131072, Typ 0
15/07/2010 04:16:04.546: Title an Stelle 262144, Länge 4700274688, Typ 1
15/07/2010 04:16:04.546: Split berechnen...
15/07/2010 04:16:04.546: Title an Stelle 0, Länge 131072, Typ 0
15/07/2010 04:16:04.546: Title an Stelle 131072, Länge 131072, Typ 0
15/07/2010 04:16:04.546: Title an Stelle 262144, Länge 4700274688, Typ 1
15/07/2010 04:16:04.546: Split in HMOVIE 5ba5008, Position in Datei 4271570944
15/07/2010 04:16:14.406: Step 1 of 6, Codage du film 1...
15/07/2010 04:16:14.406: Eintragen des Splitpunktes 4271570944 bei ConvertMovie(5ba5008)
15/07/2010 04:17:06.515: Step 1 done
15/07/2010 04:17:06.515: ERROR: PrepareDVDVideoFiles() failed with errNo 11 - user cancelled
15/07/2010 04:17:06.515: !!! DBK error in BurnProject: 2 - user cancelled operation !!!
15/07/2010 04:17:26.250: Open Project: Fast_and_furious_4 -- dvd project 2010-07-15
15/07/2010 04:17:26.250: VideoMode: PAL Temp Dir: D:\Magix DVD 8\Disc Images\
15/07/2010 04:17:26.250: dll version 8.0.3.0
15/07/2010 04:17:26.250: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
15/07/2010 04:17:26.265: EstimateLayerSplitPoint()...
15/07/2010 04:17:26.265: Splitpunkt 4271833088 auf Disk mit Größe 4700536832
15/07/2010 04:17:26.265: Title an Stelle 0, Länge 131072, Typ 0
15/07/2010 04:17:26.265: Title an Stelle 131072, Länge 131072, Typ 0
15/07/2010 04:17:26.265: Title an Stelle 262144, Länge 4700274688, Typ 1
15/07/2010 04:17:26.265: Split berechnen...
15/07/2010 04:17:26.265: Title an Stelle 0, Länge 131072, Typ 0
15/07/2010 04:17:26.265: Title an Stelle 131072, Länge 131072, Typ 0
15/07/2010 04:17:26.265: Title an Stelle 262144, Länge 4700274688, Typ 1
15/07/2010 04:17:26.265: Split in HMOVIE 5ba5008, Position in Datei 4271570944
15/07/2010 04:17:31.671: Step 1 of 6, Codage du film 1...
15/07/2010 04:17:31.671: Eintragen des Splitpunktes 4271570944 bei ConvertMovie(5ba5008)
15/07/2010 04:17:31.671: Step 1 done
15/07/2010 04:17:31.687: Step 2 of 6, Codage du menu du film...
15/07/2010 04:18:29.578: Step 2 done
15/07/2010 04:18:29.593: Step 3 of 6, Codage du menu de chapitres 1...
15/07/2010 04:18:29.593: Step 3 done
15/07/2010 04:18:29.593: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_1.VOB
15/07/2010 04:18:29.593: Step 4 of 6, Création d'une image disque...
15/07/2010 04:18:30.218: Step 4 done
15/07/2010 04:18:32.687: Step 5 of 6
15/07/2010 04:18:32.687: Step 5 done
15/07/2010 04:18:32.703: ------------ InitializeBurningProcess Point ----------------
15/07/2010 04:18:32.828: setting PoINT cache size to 16777216l
15/07/2010 04:18:32.828: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
15/07/2010 04:18:32.828: Booktype: don't care
15/07/2010 04:18:32.828: setting write speed to 3324000 bytes/sec
15/07/2010 04:18:32.828: this equals 2,400000x DVD / 18,843538x CD Speed
15/07/2010 04:18:32.828: ------------ done: succeeded ----------------
15/07/2010 04:18:32.828: ------------ CreateAPIProject ----------------
15/07/2010 04:18:32.828: Step 6 of 6
15/07/2010 04:18:32.828: creating DVD project in prepfile mode...
15/07/2010 04:18:32.843: create volume... OK
15/07/2010 04:18:32.843: verify option OFF
15/07/2010 04:18:32.843: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VIDEO_TS.IFO"
15/07/2010 04:18:32.843: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VIDEO_TS.VOB"
15/07/2010 04:18:32.843: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_1.VOB"
15/07/2010 04:18:32.843: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_0.IFO"
15/07/2010 04:18:32.843: Step 6 done
15/07/2010 04:18:32.843: ------------ done ----------------
15/07/2010 04:18:32.843: ------------ BurnToDisc ----------------
15/07/2010 04:18:32.843: time:
15/07/2010 04:18:32.843: Step 6 of 6
15/07/2010 04:18:32.843: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
15/07/2010 04:18:32.843: Booktype: don't care
15/07/2010 04:18:32.843: setting write speed to 3324000 bytes/sec
15/07/2010 04:18:32.843: this equals 2,400000x DVD / 18,843538x CD Speed
15/07/2010 04:18:32.859: Check on previously direct recorded session...OK
15/07/2010 04:18:32.953: AVSDK Message - INFO: :Recording volume ...
15/07/2010 04:18:32.953: AVSDK Message - INFO: :Recording -> formatting disc to prepare recording ...
15/07/2010 04:18:33.000: AVSDK Status - Begin operation Recording 20310 sectors/frames
15/07/2010 04:18:33.000: time:
15/07/2010 04:18:33.015: AVSDK Message - INFO: :Recording -> writing data ...
15/07/2010 04:18:33.015: AVSDK Message - ERROR: :Cannot format track -> illegal request or bad parameter
15/07/2010 04:18:33.015: AVSDK Message - ERROR: :Bad request: Bad driver parameter
15/07/2010 04:18:33.109: AVSDK Status - End operation Recording 20310 sectors/frames
15/07/2010 04:18:33.109: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
15/07/2010 04:18:33.109: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 4 - invalid parameter given !!!
15/07/2010 04:18:33.109: Step 6 done
15/07/2010 04:18:33.125: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 233 - invalid parameter given !!!
15/07/2010 04:18:33.125: ------------ done ----------------
15/07/2010 04:18:33.125: time:
15/07/2010 04:18:33.125: project burning failed
15/07/2010 04:18:33.125: !!! DBK error in CBurnDevSupport::BurnProject(): 233 - invalid parameter given !!!
15/07/2010 04:18:33.125: !!! DBK error in BurnProject: 233 - invalid parameter given !!!
15/07/2010 04:18:50.781: WM_DEVICECHANGE( VOLUMECHANGE ) for drive f:
15/07/2010 04:18:50.781: DEVICE REMOVAL
15/07/2010 04:19:12.890: WM_DEVICECHANGE( VOLUMECHANGE ) for drive f:
15/07/2010 04:19:12.890: DEVICE ARRIVED
15/07/2010 04:19:12.890: AVSDK Message - ERROR: :Cannot open drive -> error code 14
15/07/2010 04:19:12.890: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
15/07/2010 04:19:12.890: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 203 - burn support - open device failed !!!
15/07/2010 04:19:15.265: Open Project: Fast_and_furious_4 -- dvd project 2010-07-15
15/07/2010 04:19:15.265: VideoMode: PAL Temp Dir: D:\Magix DVD 8\Disc Images\
15/07/2010 04:19:15.265: dll version 8.0.3.0
15/07/2010 04:19:15.265: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
15/07/2010 04:19:15.265: EstimateLayerSplitPoint()...
15/07/2010 04:19:15.265: Splitpunkt 4271833088 auf Disk mit Größe 4700536832
15/07/2010 04:19:15.265: Title an Stelle 0, Länge 131072, Typ 0
15/07/2010 04:19:15.265: Title an Stelle 131072, Länge 131072, Typ 0
15/07/2010 04:19:15.265: Title an Stelle 262144, Länge 4700274688, Typ 1
15/07/2010 04:19:15.265: Split berechnen...
15/07/2010 04:19:15.265: Title an Stelle 0, Länge 131072, Typ 0
15/07/2010 04:19:15.265: Title an Stelle 131072, Länge 131072, Typ 0
15/07/2010 04:19:15.281: Title an Stelle 262144, Länge 4700274688, Typ 1
15/07/2010 04:19:15.281: Split in HMOVIE 5ba5008, Position in Datei 4271570944
15/07/2010 04:19:20.515: ERROR: PrepareDVDVideoFiles() failed with errNo 11 - user cancelled
15/07/2010 04:19:20.515: !!! DBK error in BurnProject: 2 - user cancelled operation !!!
15/07/2010 04:19:34.031: setting no speed limit
15/07/2010 04:19:47.093: Open Project: Fast_and_furious_4 -- dvd project 2010-07-15
15/07/2010 04:19:47.093: VideoMode: PAL Temp Dir: D:\Magix DVD 8\Disc Images\
15/07/2010 04:19:47.093: dll version 8.0.3.0
15/07/2010 04:19:47.093: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
15/07/2010 04:19:47.093: EstimateLayerSplitPoint()...
15/07/2010 04:19:47.093: Splitpunkt 4271833088 auf Disk mit Größe 4700536832
15/07/2010 04:19:47.093: Title an Stelle 0, Länge 131072, Typ 0
15/07/2010 04:19:47.093: Title an Stelle 131072, Länge 131072, Typ 0
15/07/2010 04:19:47.093: Title an Stelle 262144, Länge 4700274688, Typ 1
15/07/2010 04:19:47.093: Split berechnen...
15/07/2010 04:19:47.093: Title an Stelle 0, Länge 131072, Typ 0
15/07/2010 04:19:47.125: Title an Stelle 131072, Länge 131072, Typ 0
15/07/2010 04:19:47.125: Title an Stelle 262144, Länge 4700274688, Typ 1
15/07/2010 04:19:47.125: Split in HMOVIE 5ba5008, Position in Datei 4271570944
15/07/2010 04:19:49.984: Step 1 of 6, Codage du film 1...
15/07/2010 04:19:49.984: Eintragen des Splitpunktes 4271570944 bei ConvertMovie(5ba5008)
15/07/2010 06:52:20.578: Step 1 done
15/07/2010 06:52:20.609: Step 2 of 6, Codage du menu du film...
15/07/2010 06:53:19.765: Step 2 done
15/07/2010 06:53:19.765: Step 3 of 6, Codage du menu de chapitres 1...
15/07/2010 06:53:19.765: Step 3 done
15/07/2010 06:53:19.765: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_1.VOB
15/07/2010 06:53:19.765: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_2.VOB
15/07/2010 06:53:19.765: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_3.VOB
15/07/2010 06:53:19.765: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_4.VOB
15/07/2010 06:53:19.765: ConvertMovie() - encoded file: D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_5.VOB
15/07/2010 06:53:19.781: Step 4 of 6, Création d'une image disque...
15/07/2010 06:57:50.437: Step 4 done
15/07/2010 06:57:55.875: Step 5 of 6
15/07/2010 06:57:55.875: Step 5 done
15/07/2010 06:57:55.875: ------------ InitializeBurningProcess Point ----------------
15/07/2010 06:57:56.000: setting PoINT cache size to 16777216l
15/07/2010 06:57:56.000: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
15/07/2010 06:57:56.000: Booktype: don't care
15/07/2010 06:57:56.015: setting write speed to 3324000 bytes/sec
15/07/2010 06:57:56.015: this equals 2,400000x DVD / 18,843538x CD Speed
15/07/2010 06:57:56.015: ------------ done: succeeded ----------------
15/07/2010 06:57:56.015: ------------ CreateAPIProject ----------------
15/07/2010 06:57:56.015: Step 6 of 6
15/07/2010 06:57:56.015: creating DVD project in prepfile mode...
15/07/2010 06:57:56.015: create volume... OK
15/07/2010 06:57:56.015: verify option OFF
15/07/2010 06:57:56.015: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VIDEO_TS.IFO"
15/07/2010 06:57:56.015: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VIDEO_TS.VOB"
15/07/2010 06:57:56.015: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_1.VOB"
15/07/2010 06:57:56.015: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_2.VOB"
15/07/2010 06:57:56.031: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_3.VOB"
15/07/2010 06:57:56.031: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_4.VOB"
15/07/2010 06:57:56.031: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_5.VOB"
15/07/2010 06:57:56.031: adding file "D:\Magix DVD 8\Disc Images\DVD Image Fast_and_furious_4\VTS_01_0.IFO"
15/07/2010 06:57:56.031: Step 6 done
15/07/2010 06:57:56.031: ------------ done ----------------
15/07/2010 06:57:56.031: ------------ BurnToDisc ----------------
15/07/2010 06:57:56.031: time:
15/07/2010 06:57:56.031: Step 6 of 6
15/07/2010 06:57:56.031: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
15/07/2010 06:57:56.031: Booktype: don't care
15/07/2010 06:57:56.031: setting write speed to 3324000 bytes/sec
15/07/2010 06:57:56.031: this equals 2,400000x DVD / 18,843538x CD Speed
15/07/2010 06:57:56.031: Check on previously direct recorded session...OK
15/07/2010 06:57:56.140: AVSDK Message - INFO: :Recording volume ...
15/07/2010 06:57:56.140: AVSDK Message - INFO: :Recording -> formatting disc to prepare recording ...
15/07/2010 06:57:56.187: AVSDK Status - Begin operation Recording 2295104 sectors/frames
15/07/2010 06:57:56.187: time:
15/07/2010 06:57:56.187: AVSDK Message - INFO: :Recording -> writing data ...
15/07/2010 06:57:56.187: AVSDK Message - ERROR: :Cannot format track -> illegal request or bad parameter
15/07/2010 06:57:56.187: AVSDK Message - ERROR: :Bad request: Bad driver parameter
15/07/2010 06:57:56.281: AVSDK Status - End operation Recording 2295104 sectors/frames
15/07/2010 06:57:56.281: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
15/07/2010 06:57:56.281: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 4 - invalid parameter given !!!
15/07/2010 06:57:56.281: Step 6 done
15/07/2010 06:57:56.281: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 233 - invalid parameter given !!!
15/07/2010 06:57:56.281: ------------ done ----------------
15/07/2010 06:57:56.281: time:
15/07/2010 06:57:56.281: project burning failed
15/07/2010 06:57:56.281: !!! DBK error in CBurnDevSupport::BurnProject(): 233 - invalid parameter given !!!
15/07/2010 06:57:56.296: !!! DBK error in BurnProject: 233 - invalid parameter given !!!
15/07/2010 07:05:39.781: WM_DEVICECHANGE( VOLUMECHANGE ) for drive f:
15/07/2010 07:05:39.781: DEVICE REMOVAL
-------------------------- 15/07/2010 11:16:21 --------------------------
15/07/2010 11:16:21.203: DLLAV32.DLL loaded, all entry points available
15/07/2010 11:16:21.203: AVSDK MsgCbFunc registered
15/07/2010 11:16:21.203: AVSDK: StatCbFunc registered
15/07/2010 11:16:21.328: AVSDK Version 8.1.186
15/07/2010 11:16:21.328: ------------ Reading Device Info ----------------
15/07/2010 11:16:21.328: AVSDK: 1 device(s) found
15/07/2010 11:16:21.328: Adapter=1 ID=0 LUN=0 F:BENQ DVD DD DW1640 Revision:BSHB
15/07/2010 11:16:21.375: AVSDK: 1 record device(s) available
15/07/2010 11:16:21.375: ------------ done ----------------
15/07/2010 11:16:22.828: setting no speed limit
15/07/2010 11:16:22.828: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
15/07/2010 11:16:22.890: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
15/07/2010 11:16:22.890: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
15/07/2010 11:16:22.890: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
15/07/2010 11:16:36.125: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
15/07/2010 11:16:36.125: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
15/07/2010 11:16:36.125: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
15/07/2010 11:16:42.750: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
15/07/2010 11:16:42.750: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
15/07/2010 11:16:42.750: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
15/07/2010 11:16:56.437: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
15/07/2010 11:16:56.437: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
15/07/2010 11:16:56.437: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
15/07/2010 11:16:58.531: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
15/07/2010 11:16:58.531: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
15/07/2010 11:16:58.531: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
15/07/2010 11:16:58.531: Open Project: Disque_2010-07-15 -- dvd project 2010-07-15
15/07/2010 11:16:58.531: VideoMode: PAL Temp Dir: D:\Magix DVD 8\Disc Images\
15/07/2010 11:16:58.531: dll version 8.0.3.0
15/07/2010 11:16:58.531: PrepareDVDVideoFiles() - Abschätze