interner Fehler beim brennen

oldsum schrieb am 22.02.2010 um 11:22 Uhr
Halli - Hallo,
bin Laie, habe aber nach sehr langer Zeit meinen Urlaub mit 750 Fotos, Musik, Texten, Blenden und Effekten hinbekommen.
Wenn ich nun brennen will macht das Programm stundenlang ex.... (irgendein Format umwandeln was normal sein soll). Beim letzten Schriftt bricht er "Brenn- vorgang ab, interner Fehler".
Habe mal die Daten hierhin kopiert weil ich jetzt am Ende bin. Wer kann mir helfen das Projekt zu Ende zu bringen?
Danke, Gruß Uwe

-------------------------- 11.11.2009 00:24:17 --------------------------

11.11.2009 00:24:17.587:   DLLAV32.DLL loaded, all entry points available
11.11.2009 00:24:17.648:   AVSDK MsgCbFunc registered
11.11.2009 00:24:17.648:   AVSDK: StatCbFunc registered
11.11.2009 00:24:17.958:   AVSDK Version 6.2.168
11.11.2009 00:24:17.958:   ------------ Reading Device Info ----------------
11.11.2009 00:24:17.958:   AVSDK: 2 device(s) found
11.11.2009 00:24:17.958:   Adapter=1  ID=0  LUN=0   E:SONY DVD RW DRU-510A Revision:1.0c
11.11.2009 00:24:17.958:   AVSDK: 1 record device(s) available
11.11.2009 00:24:17.958:   ------------ done ----------------

-------------------------- 11.01.2010 18:29:11 --------------------------

11.01.2010 18:29:11.902:   DLLAV32.DLL loaded, all entry points available
11.01.2010 18:29:11.942:   AVSDK MsgCbFunc registered
11.01.2010 18:29:11.942:   AVSDK: StatCbFunc registered
11.01.2010 18:29:13.324:   AVSDK Version 6.2.168
11.01.2010 18:29:13.334:   ------------ Reading Device Info ----------------
11.01.2010 18:29:13.334:   AVSDK: 2 device(s) found
11.01.2010 18:29:13.334:   Adapter=1  ID=0  LUN=0   E:SONY DVD RW DRU-510A Revision:1.0c
11.01.2010 18:29:13.354:   AVSDK: 1 record device(s) available
11.01.2010 18:29:13.354:   ------------ done ----------------
11.01.2010 18:29:25.622:   setting no speed limit
11.01.2010 18:29:25.622:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
11.01.2010 18:29:25.712:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
11.01.2010 18:29:25.712:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
11.01.2010 18:29:25.712:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!

-------------------------- 13.02.2010 12:56:23 --------------------------

13.02.2010 12:56:23.496:   DLLAV32.DLL loaded, all entry points available
13.02.2010 12:56:23.586:   AVSDK MsgCbFunc registered
13.02.2010 12:56:23.586:   AVSDK: StatCbFunc registered
13.02.2010 12:56:24.658:   AVSDK Version 6.2.168
13.02.2010 12:56:24.778:   ------------ Reading Device Info ----------------
13.02.2010 12:56:24.778:   AVSDK: 2 device(s) found
13.02.2010 12:56:24.778:   Adapter=1  ID=0  LUN=0   E:SONY DVD RW DRU-510A Revision:1.0c
13.02.2010 12:56:24.798:   AVSDK: 1 record device(s) available
13.02.2010 12:56:24.798:   ------------ done ----------------
13.02.2010 12:56:24.798:   setting no speed limit
13.02.2010 12:56:24.798:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
13.02.2010 12:56:24.908:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
13.02.2010 12:56:24.908:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.02.2010 12:56:24.908:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
13.02.2010 13:07:02.785:   setting no speed limit
13.02.2010 13:07:03.246:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
13.02.2010 13:07:03.256:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.02.2010 13:07:03.266:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
13.02.2010 13:07:51.435:   setting no speed limit
13.02.2010 13:07:51.455:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
13.02.2010 13:07:51.455:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.02.2010 13:07:51.455:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
13.02.2010 13:09:54.362:   setting no speed limit
13.02.2010 13:09:54.382:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
13.02.2010 13:09:54.382:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.02.2010 13:09:54.382:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
13.02.2010 13:11:32.483:   setting no speed limit
13.02.2010 13:11:32.503:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
13.02.2010 13:11:32.503:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.02.2010 13:11:32.503:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
13.02.2010 13:11:57.389:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
13.02.2010 13:11:57.389:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.02.2010 13:11:57.389:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!

-------------------------- 13.02.2010 14:15:27 --------------------------

13.02.2010 14:15:27.067:   DLLAV32.DLL loaded, all entry points available
13.02.2010 14:15:27.187:   AVSDK MsgCbFunc registered
13.02.2010 14:15:27.187:   AVSDK: StatCbFunc registered
13.02.2010 14:15:30.682:   AVSDK Version 6.2.168
13.02.2010 14:15:30.682:   ------------ Reading Device Info ----------------
13.02.2010 14:15:30.682:   AVSDK: 2 device(s) found
13.02.2010 14:15:30.682:   Adapter=1  ID=0  LUN=0   E:SONY DVD RW DRU-510A Revision:1.0c
13.02.2010 14:15:30.712:   AVSDK: 1 record device(s) available
13.02.2010 14:15:30.712:   ------------ done ----------------
13.02.2010 14:15:31.173:   setting no speed limit
13.02.2010 14:15:31.173:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
13.02.2010 14:15:31.273:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
13.02.2010 14:15:31.273:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.02.2010 14:15:31.273:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
13.02.2010 14:17:17.946:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
13.02.2010 14:17:17.946:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.02.2010 14:17:17.946:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
13.02.2010 14:17:20.019:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
13.02.2010 14:17:20.019:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.02.2010 14:17:20.019:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
13.02.2010 14:17:20.019:   Open Project: fertig_1 -- dvd project 2010-02-13
13.02.2010 14:17:20.019:   VideoMode: PAL   Temp Dir: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\
13.02.2010 14:17:20.019:   dll version 8.0.5.3
13.02.2010 14:17:20.049:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
13.02.2010 14:17:20.049:   EstimateLayerSplitPoint()...
13.02.2010 14:17:20.049:   Splitpunkt 4271833088 auf Disk mit Größe 1682833408
13.02.2010 14:17:20.049:   Title an Stelle 0, Länge 131072, Typ 0
13.02.2010 14:17:20.049:   Title an Stelle 131072, Länge 524288, Typ 0
13.02.2010 14:17:20.049:   Title an Stelle 655360, Länge 1682178048, Typ 1
13.02.2010 14:17:20.049:   ... Split möglich nach aktuellem Title, -> Abbruch
13.02.2010 14:17:20.210:   Step 1 of 6, Encodiere Film 1 ...
13.02.2010 16:12:48.242:   Step 1 done
13.02.2010 16:12:48.762:   Step 2 of 6, Encodiere Filmmenü ...
13.02.2010 16:12:57.765:   Step 2 done
13.02.2010 16:12:57.765:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
13.02.2010 16:14:01.156:   Step 3 done
13.02.2010 16:14:01.307:   ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_1.VOB
13.02.2010 16:14:01.307:   ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_2.VOB
13.02.2010 16:14:01.417:   Step 4 of 6, Erzeuge Disc-Image ...
13.02.2010 16:16:38.282:   Step 4 done
13.02.2010 16:16:41.026:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
13.02.2010 16:16:41.036:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.02.2010 16:16:41.046:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
13.02.2010 16:17:08.606:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
13.02.2010 16:17:08.606:       DEVICE ARRIVED
13.02.2010 16:17:10.419:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 16:17:10.479:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 16:17:10.839:   AVSDK Message - WARNING: :Out of licenses in AvVolCreate*()
13.02.2010 16:17:10.839:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolCreate(): 1 - operation can not be performed now !!!
13.02.2010 16:17:15.125:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 16:17:15.205:   Step 5 of 6
13.02.2010 16:17:15.205:   Step 5 done
13.02.2010 16:17:15.216:   ------------ InitializeBurningProcess Point ----------------
13.02.2010 16:17:15.276:   setting PoINT cache size to 16777216l
13.02.2010 16:17:15.276:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
13.02.2010 16:17:15.276:       Booktype:    don't care
13.02.2010 16:17:15.296:   setting write speed to 3324000  bytes/sec
13.02.2010 16:17:15.296:   this equals 2,400000x DVD / 18,843538x CD Speed
13.02.2010 16:17:15.296:   ------------ done: succeeded ----------------
13.02.2010 16:17:15.306:   ------------ CreateAPIProject ----------------
13.02.2010 16:17:15.316:   Step 6 of 6
13.02.2010 16:17:15.316:   creating DVD project in prepfile mode...
13.02.2010 16:17:15.336:   create volume... OK
13.02.2010 16:17:15.356:   verify option OFF
13.02.2010 16:17:15.486:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VIDEO_TS.IFO"
13.02.2010 16:17:15.486:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VIDEO_TS.VOB"
13.02.2010 16:17:15.486:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_1.VOB"
13.02.2010 16:17:15.486:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_2.VOB"
13.02.2010 16:17:15.496:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_0.IFO"
13.02.2010 16:17:15.496:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_0.VOB"
13.02.2010 16:17:15.496:   Step 6 done
13.02.2010 16:17:15.496:   ------------ done ----------------
13.02.2010 16:17:15.496:   ------------ BurnToDisc ----------------
13.02.2010 16:17:15.496:   time:
13.02.2010 16:17:15.546:   Step 6 of 6
13.02.2010 16:17:15.556:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
13.02.2010 16:17:15.556:       Booktype:    don't care
13.02.2010 16:17:15.556:   setting write speed to 3324000  bytes/sec
13.02.2010 16:17:15.556:   this equals 2,400000x DVD / 18,843538x CD Speed
13.02.2010 16:17:15.556:   Check on previously direct recorded session...OK
13.02.2010 16:17:15.676:   AVSDK Message - INFO: :Recording volume ...
13.02.2010 16:17:15.676:   AVSDK Status - Begin operation Recording 777360 sectors/frames
13.02.2010 16:17:15.676:   time:
13.02.2010 16:17:15.696:   AVSDK Message - INFO: :Recording -> writing data ...
13.02.2010 16:17:17.218:   wrote LeadIn, start DataCopy
13.02.2010 16:17:17.218:   time:
13.02.2010 16:18:26.298:   AVSDK Message - ERROR: :Cannot write to disc -> Power calibration or program memory area update failure (ASC/ASCQ 73/00)
13.02.2010 16:18:56.481:   AVSDK Status - End operation Recording 777360 sectors/frames
13.02.2010 16:18:56.481:   AVSDK Message - INFO: :Recording failed due to write error on disc
13.02.2010 16:18:56.481:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
13.02.2010 16:18:56.481:   Step 6 done
13.02.2010 16:18:56.481:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 251 - write error occurred on disc !!!
13.02.2010 16:18:56.481:   ------------ done ----------------
13.02.2010 16:18:56.481:   time:
13.02.2010 16:18:56.481:   project burning failed
13.02.2010 16:18:56.481:   !!! DBK error in CBurnDevSupport::BurnProject(): 251 - write error occurred on disc !!!
13.02.2010 16:18:56.561:   !!! DBK error in BurnProject: 251 - write error occurred on disc !!!
13.02.2010 16:19:22.719:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
13.02.2010 16:19:22.719:       DEVICE REMOVAL
13.02.2010 16:19:44.891:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
13.02.2010 16:19:44.891:       DEVICE ARRIVED
13.02.2010 16:19:46.743:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 16:23:45.717:   setting no speed limit
13.02.2010 16:23:46.879:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 16:36:10.027:   setting no speed limit
13.02.2010 16:36:13.002:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 16:44:44.657:   setting no speed limit
13.02.2010 16:44:47.682:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 16:46:17.351:   setting no speed limit
13.02.2010 16:46:20.846:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 16:46:22.828:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 16:46:24.972:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 16:46:25.102:   Open Project: fertig_1 -- dvd project 2010-02-13
13.02.2010 16:46:25.102:   VideoMode: PAL   Temp Dir: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\
13.02.2010 16:46:25.102:   dll version 8.0.5.3
13.02.2010 16:46:25.112:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
13.02.2010 16:46:25.112:   EstimateLayerSplitPoint()...
13.02.2010 16:46:25.112:   Splitpunkt 4271833088 auf Disk mit Größe 1682833408
13.02.2010 16:46:25.112:   Title an Stelle 0, Länge 131072, Typ 0
13.02.2010 16:46:25.112:   Title an Stelle 131072, Länge 524288, Typ 0
13.02.2010 16:46:25.112:   Title an Stelle 655360, Länge 1682178048, Typ 1
13.02.2010 16:46:25.112:   ... Split möglich nach aktuellem Title, -> Abbruch
13.02.2010 16:46:47.694:   Step 1 of 6, Encodiere Film 1 ...
13.02.2010 16:46:47.714:   Step 1 done
13.02.2010 16:46:47.724:   Step 2 of 6, Encodiere Filmmenü ...
13.02.2010 16:46:48.656:   Step 2 done
13.02.2010 16:46:48.656:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
13.02.2010 16:47:57.475:   Step 3 done
13.02.2010 16:47:57.575:   ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_1.VOB
13.02.2010 16:47:57.575:   ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_2.VOB
13.02.2010 16:47:57.605:   Step 4 of 6, Erzeuge Disc-Image ...
13.02.2010 16:48:02.382:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
13.02.2010 16:48:02.382:       DEVICE REMOVAL
13.02.2010 16:51:35.428:   Step 4 done
13.02.2010 16:51:52.022:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
13.02.2010 16:51:52.022:       DEVICE ARRIVED
13.02.2010 16:51:53.504:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 16:51:53.514:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 16:51:53.784:   AVSDK Message - WARNING: :Out of licenses in AvVolCreate*()
13.02.2010 16:51:53.784:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolCreate(): 1 - operation can not be performed now !!!
13.02.2010 16:51:55.967:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 16:52:02.667:   Step 5 of 6
13.02.2010 16:52:02.667:   Step 5 done
13.02.2010 16:52:02.667:   ------------ InitializeBurningProcess Point ----------------
13.02.2010 16:52:02.757:   setting PoINT cache size to 16777216l
13.02.2010 16:52:02.757:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
13.02.2010 16:52:02.757:       Booktype:    don't care
13.02.2010 16:52:02.757:   setting write speed to 3324000  bytes/sec
13.02.2010 16:52:02.757:   this equals 2,400000x DVD / 18,843538x CD Speed
13.02.2010 16:52:02.757:   ------------ done: succeeded ----------------
13.02.2010 16:52:02.757:   ------------ CreateAPIProject ----------------
13.02.2010 16:52:02.757:   Step 6 of 6
13.02.2010 16:52:02.757:   creating DVD project in prepfile mode...
13.02.2010 16:52:02.767:   create volume... OK
13.02.2010 16:52:02.767:   verify option OFF
13.02.2010 16:52:02.767:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VIDEO_TS.IFO"
13.02.2010 16:52:02.767:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VIDEO_TS.VOB"
13.02.2010 16:52:02.777:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_1.VOB"
13.02.2010 16:52:02.777:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_2.VOB"
13.02.2010 16:52:02.777:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_0.IFO"
13.02.2010 16:52:02.777:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_0.VOB"
13.02.2010 16:52:02.787:   Step 6 done
13.02.2010 16:52:02.787:   ------------ done ----------------
13.02.2010 16:52:02.787:   ------------ BurnToDisc ----------------
13.02.2010 16:52:02.787:   time:
13.02.2010 16:52:02.787:   Step 6 of 6
13.02.2010 16:52:02.787:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
13.02.2010 16:52:02.797:       Booktype:    don't care
13.02.2010 16:52:02.797:   setting write speed to 3324000  bytes/sec
13.02.2010 16:52:02.797:   this equals 2,400000x DVD / 18,843538x CD Speed
13.02.2010 16:52:02.797:   Check on previously direct recorded session...OK
13.02.2010 16:52:02.827:   AVSDK Message - INFO: :Recording volume ...
13.02.2010 16:52:02.827:   AVSDK Status - Begin operation Recording 777360 sectors/frames
13.02.2010 16:52:02.827:   time:
13.02.2010 16:52:02.827:   AVSDK Message - INFO: :Recording -> writing data ...
13.02.2010 16:52:03.989:   wrote LeadIn, start DataCopy
13.02.2010 16:52:03.989:   time:
13.02.2010 16:53:12.998:   AVSDK Message - ERROR: :Cannot write to disc -> Power calibration or program memory area update failure (ASC/ASCQ 73/00)
13.02.2010 16:53:43.502:   AVSDK Status - End operation Recording 777360 sectors/frames
13.02.2010 16:53:43.502:   AVSDK Message - INFO: :Recording failed due to write error on disc
13.02.2010 16:53:43.502:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
13.02.2010 16:53:43.502:   Step 6 done
13.02.2010 16:53:43.502:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 251 - write error occurred on disc !!!
13.02.2010 16:53:43.502:   ------------ done ----------------
13.02.2010 16:53:43.502:   time:
13.02.2010 16:53:43.502:   project burning failed
13.02.2010 16:53:43.562:   !!! DBK error in CBurnDevSupport::BurnProject(): 251 - write error occurred on disc !!!
13.02.2010 16:53:44.213:   !!! DBK error in BurnProject: 251 - write error occurred on disc !!!
13.02.2010 16:54:00.907:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
13.02.2010 16:54:00.907:       DEVICE REMOVAL
13.02.2010 16:54:21.767:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
13.02.2010 16:54:21.767:       DEVICE ARRIVED
13.02.2010 16:54:21.767:   AVSDK Message - ERROR: :Cannot open drive -> error code 14
13.02.2010 16:54:21.767:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
13.02.2010 16:54:21.767:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 203 - burn support - open device failed !!!
13.02.2010 16:54:22.869:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 16:54:25.182:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 16:54:25.192:   Open Project: fertig_1 -- dvd project 2010-02-13
13.02.2010 16:54:25.192:   VideoMode: PAL   Temp Dir: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\
13.02.2010 16:54:25.192:   dll version 8.0.5.3
13.02.2010 16:54:25.192:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
13.02.2010 16:54:25.192:   EstimateLayerSplitPoint()...
13.02.2010 16:54:25.202:   Splitpunkt 4271833088 auf Disk mit Größe 1682833408
13.02.2010 16:54:25.202:   Title an Stelle 0, Länge 131072, Typ 0
13.02.2010 16:54:25.202:   Title an Stelle 131072, Länge 524288, Typ 0
13.02.2010 16:54:25.202:   Title an Stelle 655360, Länge 1682178048, Typ 1
13.02.2010 16:54:25.202:   ... Split möglich nach aktuellem Title, -> Abbruch
13.02.2010 16:54:34.646:   Step 1 of 6, Encodiere Film 1 ...
13.02.2010 16:54:52.962:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
13.02.2010 16:54:52.962:       DEVICE REMOVAL
13.02.2010 19:17:57.145:   Step 1 done
13.02.2010 19:17:58.157:   Step 2 of 6, Encodiere Filmmenü ...
13.02.2010 19:18:04.486:   Step 2 done
13.02.2010 19:18:04.506:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
13.02.2010 19:19:09.449:   Step 3 done
13.02.2010 19:19:09.570:   ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_1.VOB
13.02.2010 19:19:09.570:   ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_2.VOB
13.02.2010 19:19:09.620:   Step 4 of 6, Erzeuge Disc-Image ...
13.02.2010 19:21:37.753:   Step 4 done
13.02.2010 19:21:39.315:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
13.02.2010 19:21:39.345:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.02.2010 19:21:39.415:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
13.02.2010 19:21:55.939:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
13.02.2010 19:21:55.939:       DEVICE ARRIVED
13.02.2010 19:21:57.801:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 19:22:38.510:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 19:22:40.613:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
13.02.2010 19:22:40.643:   Step 5 of 6
13.02.2010 19:22:40.643:   Step 5 done
13.02.2010 19:22:40.663:   ------------ InitializeBurningProcess Point ----------------
13.02.2010 19:22:40.723:   setting PoINT cache size to 16777216l
13.02.2010 19:22:40.733:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
13.02.2010 19:22:40.733:       Booktype:    don't care
13.02.2010 19:22:40.743:   setting write speed to 3324000  bytes/sec
13.02.2010 19:22:40.743:   this equals 2,400000x DVD / 18,843538x CD Speed
13.02.2010 19:22:40.743:   ------------ done: succeeded ----------------
13.02.2010 19:22:40.743:   ------------ CreateAPIProject ----------------
13.02.2010 19:22:40.753:   Step 6 of 6
13.02.2010 19:22:40.753:   creating DVD project in prepfile mode...
13.02.2010 19:22:40.753:   create volume... OK
13.02.2010 19:22:40.763:   verify option OFF
13.02.2010 19:22:40.793:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VIDEO_TS.IFO"
13.02.2010 19:22:40.793:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VIDEO_TS.VOB"
13.02.2010 19:22:40.793:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_1.VOB"
13.02.2010 19:22:40.793:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_2.VOB"
13.02.2010 19:22:40.803:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_0.IFO"
13.02.2010 19:22:40.803:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image fertig_1\VTS_01_0.VOB"
13.02.2010 19:22:40.803:   Step 6 done
13.02.2010 19:22:40.803:   ------------ done ----------------
13.02.2010 19:22:40.813:   ------------ BurnToDisc ----------------
13.02.2010 19:22:40.813:   time:
13.02.2010 19:22:40.823:   Step 6 of 6
13.02.2010 19:22:40.823:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
13.02.2010 19:22:40.823:       Booktype:    don't care
13.02.2010 19:22:40.823:   setting write speed to 3324000  bytes/sec
13.02.2010 19:22:40.823:   this equals 2,400000x DVD / 18,843538x CD Speed
13.02.2010 19:22:40.823:   Check on previously direct recorded session...OK
13.02.2010 19:22:40.863:   AVSDK Message - INFO: :Recording volume ...
13.02.2010 19:22:40.863:   AVSDK Status - Begin operation Recording 777392 sectors/frames
13.02.2010 19:22:40.873:   time:
13.02.2010 19:22:40.873:   AVSDK Message - INFO: :Recording -> writing data ...
13.02.2010 19:22:41.775:   wrote LeadIn, start DataCopy
13.02.2010 19:22:41.775:   time:
13.02.2010 19:23:54.890:   AVSDK Message - ERROR: :Cannot write to disc -> Power calibration or program memory area update failure (ASC/ASCQ 73/00)
13.02.2010 19:24:25.053:   AVSDK Status - End operation Recording 777392 sectors/frames
13.02.2010 19:24:25.053:   AVSDK Message - INFO: :Recording failed due to write error on disc
13.02.2010 19:24:25.053:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
13.02.2010 19:24:25.053:   Step 6 done
13.02.2010 19:24:25.053:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 251 - write error occurred on disc !!!
13.02.2010 19:24:25.053:   ------------ done ----------------
13.02.2010 19:24:25.053:   time:
13.02.2010 19:24:25.053:   project burning failed
13.02.2010 19:24:25.063:   !!! DBK error in CBurnDevSupport::BurnProject(): 251 - write error occurred on disc !!!
13.02.2010 19:24:25.083:   !!! DBK error in BurnProject: 251 - write error occurred on disc !!!
13.02.2010 19:40:40.235:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
13.02.2010 19:40:40.235:       DEVICE REMOVAL
13.02.2010 19:41:23.287:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
13.02.2010 19:41:23.287:       DEVICE ARRIVED
13.02.2010 19:41:25.070:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)

-------------------------- 15.02.2010 12:53:07 --------------------------

15.02.2010 12:53:07.240:   Open Project: masurenalles -- wmv hd project 2010-02-15
15.02.2010 12:53:07.240:   VideoMode: PAL   Temp Dir: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\
15.02.2010 12:53:07.240:   dll version 8.0.5.3
15.02.2010 12:53:09.634:   Step 1 of 10, Encodiere Film 1 ...
15.02.2010 12:53:46.156:   Step 1 done
15.02.2010 12:53:46.376:   ERROR: PrepareDVDVideoFiles() failed with errNo 11 - user cancelled
15.02.2010 12:53:46.467:   !!! DBK error in BurnProject: 2 - user cancelled operation !!!

-------------------------- 21.02.2010 13:49:51 --------------------------

21.02.2010 13:49:51.408:   DLLAV32.DLL loaded, all entry points available
21.02.2010 13:49:51.418:   AVSDK MsgCbFunc registered
21.02.2010 13:49:51.418:   AVSDK: StatCbFunc registered
21.02.2010 13:49:51.708:   AVSDK Version 6.2.168
21.02.2010 13:49:51.708:   ------------ Reading Device Info ----------------
21.02.2010 13:49:51.708:   AVSDK: 2 device(s) found
21.02.2010 13:49:51.708:   Adapter=1  ID=0  LUN=0   E:SONY DVD RW DRU-510A Revision:1.0c
21.02.2010 13:49:51.738:   AVSDK: 1 record device(s) available
21.02.2010 13:49:51.738:   ------------ done ----------------
21.02.2010 13:49:51.738:   setting no speed limit
21.02.2010 13:49:51.738:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
21.02.2010 13:49:51.828:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
21.02.2010 13:49:51.828:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
21.02.2010 13:49:51.828:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
21.02.2010 13:54:03.650:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
21.02.2010 13:54:03.650:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
21.02.2010 13:54:03.650:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
21.02.2010 13:54:05.713:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
21.02.2010 13:54:05.713:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
21.02.2010 13:54:05.713:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
21.02.2010 13:54:05.723:   Open Project: Disc_2010-02-21 -- dvd project 2010-02-21
21.02.2010 13:54:05.723:   VideoMode: PAL   Temp Dir: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\
21.02.2010 13:54:05.723:   dll version 8.0.5.3
21.02.2010 13:54:05.733:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
21.02.2010 13:54:05.733:   EstimateLayerSplitPoint()...
21.02.2010 13:54:05.733:   Splitpunkt 4271833088 auf Disk mit Größe 4161536
21.02.2010 13:54:05.733:   Title an Stelle 0, Länge 131072, Typ 0
21.02.2010 13:54:05.733:   Title an Stelle 131072, Länge 131072, Typ 0
21.02.2010 13:54:05.733:   Title an Stelle 262144, Länge 0, Typ 1
21.02.2010 13:54:05.733:   Title an Stelle 262144, Länge 1245184, Typ 2
21.02.2010 13:54:05.733:   Title an Stelle 1507328, Länge 1081344, Typ 2
21.02.2010 13:54:05.783:   ... Split möglich nach aktuellem Title, -> Abbruch
21.02.2010 13:54:05.783:   Step 1 of 6, Encodiere Film 1 ...
21.02.2010 13:54:16.959:   Step 1 done
21.02.2010 13:54:16.969:   Step 2 of 6, Encodiere Filmmenü ...
21.02.2010 13:54:17.951:   Step 2 done
21.02.2010 13:54:17.951:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
21.02.2010 13:54:17.951:   Step 3 done
21.02.2010 13:54:17.961:   ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2010-02-21\VTS_01_1.VOB
21.02.2010 13:54:17.961:   Step 4 of 6, Erzeuge Disc-Image ...
21.02.2010 13:54:18.271:   Step 4 done
21.02.2010 13:54:18.331:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
21.02.2010 13:54:18.331:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
21.02.2010 13:54:18.331:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
21.02.2010 13:54:48.234:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
21.02.2010 13:54:48.234:       DEVICE ARRIVED
21.02.2010 13:54:50.007:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
21.02.2010 13:54:50.257:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
21.02.2010 13:54:53.892:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
21.02.2010 13:54:53.922:   Step 5 of 6
21.02.2010 13:54:53.922:   Step 5 done
21.02.2010 13:54:53.933:   ------------ InitializeBurningProcess Point ----------------
21.02.2010 13:54:53.983:   setting PoINT cache size to 16777216l
21.02.2010 13:54:53.993:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
21.02.2010 13:54:53.993:       Booktype:    don't care
21.02.2010 13:54:54.003:   setting write speed to 3324000  bytes/sec
21.02.2010 13:54:54.003:   this equals 2,400000x DVD / 18,843538x CD Speed
21.02.2010 13:54:54.003:   ------------ done: succeeded ----------------
21.02.2010 13:54:54.003:   ------------ CreateAPIProject ----------------
21.02.2010 13:54:54.003:   Step 6 of 6
21.02.2010 13:54:54.003:   creating DVD project in prepfile mode...
21.02.2010 13:54:54.053:   create volume... OK
21.02.2010 13:54:54.053:   verify option OFF
21.02.2010 13:54:54.053:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2010-02-21\VIDEO_TS.IFO"
21.02.2010 13:54:54.053:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2010-02-21\VIDEO_TS.VOB"
21.02.2010 13:54:54.063:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2010-02-21\VTS_01_1.VOB"
21.02.2010 13:54:54.063:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2010-02-21\VTS_01_0.IFO"
21.02.2010 13:54:54.063:   creating directory "custom"
21.02.2010 13:54:54.093:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\für film 1.MPH"
21.02.2010 13:54:54.103:   creating directory "custom"
21.02.2010 13:54:54.103:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\für film 2.MPH"
21.02.2010 13:54:54.103:   creating directory "custom"
21.02.2010 13:54:54.103:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\für film 3.MPH"
21.02.2010 13:54:54.113:   Step 6 done
21.02.2010 13:54:54.113:   ------------ done ----------------
21.02.2010 13:54:54.113:   ------------ BurnToDisc ----------------
21.02.2010 13:54:54.113:   time:
21.02.2010 13:54:54.133:   Step 6 of 6
21.02.2010 13:54:54.143:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
21.02.2010 13:54:54.143:       Booktype:    don't care
21.02.2010 13:54:54.143:   setting write speed to 3324000  bytes/sec
21.02.2010 13:54:54.143:   this equals 2,400000x DVD / 18,843538x CD Speed
21.02.2010 13:54:54.143:   Check on previously direct recorded session...OK
21.02.2010 13:54:54.193:   AVSDK Message - INFO: :Recording volume ...
21.02.2010 13:54:54.193:   AVSDK Status - Begin operation Recording 2512 sectors/frames
21.02.2010 13:54:54.193:   time:
21.02.2010 13:54:54.203:   AVSDK Message - INFO: :Recording -> writing data ...
21.02.2010 13:54:55.274:   wrote LeadIn, start DataCopy
21.02.2010 13:54:55.274:   time:
21.02.2010 13:54:55.725:   writing leadout and closing disc
21.02.2010 13:54:55.725:   time:
21.02.2010 13:55:47.960:   AVSDK Message - ERROR: :Cannot write or close track -> Power calibration or program memory area update failure (ASC/ASCQ 73/00)
21.02.2010 13:55:48.040:   AVSDK Status - End operation Recording 2512 sectors/frames
21.02.2010 13:55:48.040:   AVSDK Message - INFO: :Recording failed due to write error on disc
21.02.2010 13:55:48.050:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
21.02.2010 13:55:48.050:   Step 6 done
21.02.2010 13:55:48.050:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 251 - write error occurred on disc !!!
21.02.2010 13:55:48.050:   ------------ done ----------------
21.02.2010 13:55:48.050:   time:
21.02.2010 13:55:48.050:   project burning failed
21.02.2010 13:55:48.060:   !!! DBK error in CBurnDevSupport::BurnProject(): 251 - write error occurred on disc !!!
21.02.2010 13:55:48.060:   !!! DBK error in BurnProject: 251 - write error occurred on disc !!!
21.02.2010 15:25:33.084:   ------------ Reading Device Info ----------------
21.02.2010 15:25:33.114:   AVSDK: 2 device(s) found
21.02.2010 15:25:33.114:   Adapter=1  ID=0  LUN=0   E:SONY DVD RW DRU-510A Revision:1.0c
21.02.2010 15:25:33.134:   AVSDK: 1 record device(s) available
21.02.2010 15:25:33.134:   ------------ done ----------------
21.02.2010 15:25:34.085:   setting no speed limit
21.02.2010 15:25:37.119:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
21.02.2010 15:33:32.894:   ------------ Reading Device Info ----------------
21.02.2010 15:33:32.904:   AVSDK: 2 device(s) found
21.02.2010 15:33:32.904:   Adapter=1  ID=0  LUN=0   E:SONY DVD RW DRU-510A Revision:1.0c
21.02.2010 15:33:32.904:   AVSDK: 1 record device(s) available
21.02.2010 15:33:32.904:   ------------ done ----------------
21.02.2010 15:33:34.135:   setting no speed limit
21.02.2010 15:33:37.650:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
21.02.2010 15:34:13.632:   setting no speed limit
21.02.2010 15:34:14.784:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
21.02.2010 15:34:52.428:   setting no speed limit
21.02.2010 15:34:54.551:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
21.02.2010 15:35:39.906:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
21.02.2010 15:35:42.099:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
21.02.2010 15:35:42.159:   Open Project: wirklich_fertig_1 -- dvd project 2010-02-21
21.02.2010 15:35:42.179:   VideoMode: PAL   Temp Dir: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\
21.02.2010 15:35:42.179:   dll version 8.0.5.3
21.02.2010 15:35:42.210:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
21.02.2010 15:35:42.220:   EstimateLayerSplitPoint()...
21.02.2010 15:35:42.220:   Splitpunkt 4271833088 auf Disk mit Größe 4700078080
21.02.2010 15:35:42.230:   Title an Stelle 0, Länge 131072, Typ 0
21.02.2010 15:35:42.230:   Title an Stelle 131072, Länge 524288, Typ 0
21.02.2010 15:35:42.230:   Title an Stelle 655360, Länge 1614774272, Typ 1
21.02.2010 15:35:42.230:   Title an Stelle 1615429632, Länge 131072, Typ 0
21.02.2010 15:35:42.230:   Title an Stelle 1615560704, Länge 1545797632, Typ 1
21.02.2010 15:35:42.230:   ... Split möglich nach aktuellem Title, -> Abbruch
21.02.2010 15:35:42.250:   Step 1 of 10, Encodiere Film 1 ...
21.02.2010 18:09:48.775:   Step 1 done
21.02.2010 18:09:48.996:   Step 2 of 10, Encodiere Film 2 ...
21.02.2010 21:15:37.086:   Step 2 done
21.02.2010 21:15:37.446:   Step 3 of 10, Encodiere Film 3 ...
22.02.2010 00:16:53.806:   Step 3 done
22.02.2010 00:16:54.387:   Step 4 of 10, Encodiere Filmmenü ...
22.02.2010 00:17:08.407:   Step 4 done
22.02.2010 00:17:08.437:   Step 5 of 10, Encodiere Kapitelmenü 1 ...
22.02.2010 00:18:18.838:   Step 5 done
22.02.2010 00:18:18.978:   Step 6 of 10, Encodiere Kapitelmenü 2 ...
22.02.2010 00:18:18.978:   Step 6 done
22.02.2010 00:18:18.998:   Step 7 of 10, Encodiere Kapitelmenü 3 ...
22.02.2010 00:18:19.008:   Step 7 done
22.02.2010 00:18:19.179:   ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VTS_01_1.VOB
22.02.2010 00:18:19.189:   ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VTS_01_2.VOB
22.02.2010 00:18:19.239:   ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VTS_02_1.VOB
22.02.2010 00:18:19.239:   ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VTS_02_2.VOB
22.02.2010 00:18:19.289:   ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VTS_03_1.VOB
22.02.2010 00:18:19.289:   ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VTS_03_2.VOB
22.02.2010 00:18:19.289:   Step 8 of 10, Erzeuge Disc-Image ...
22.02.2010 00:26:55.461:   Step 8 done
22.02.2010 00:27:06.467:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
22.02.2010 00:27:11.294:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
22.02.2010 00:27:11.354:   Step 9 of 10
22.02.2010 00:27:11.354:   Step 9 done
22.02.2010 00:27:11.364:   ------------ InitializeBurningProcess Point ----------------
22.02.2010 00:27:11.454:   setting PoINT cache size to 16777216l
22.02.2010 00:27:11.454:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
22.02.2010 00:27:11.454:       Booktype:    don't care
22.02.2010 00:27:11.484:   setting write speed to 3324000  bytes/sec
22.02.2010 00:27:11.484:   this equals 2,400000x DVD / 18,843538x CD Speed
22.02.2010 00:27:11.484:   ------------ done: succeeded ----------------
22.02.2010 00:27:11.494:   ------------ CreateAPIProject ----------------
22.02.2010 00:27:11.594:   Step 10 of 10
22.02.2010 00:27:11.604:   creating DVD project in prepfile mode...
22.02.2010 00:27:11.604:   create volume... OK
22.02.2010 00:27:11.644:   verify option OFF
22.02.2010 00:27:11.734:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VIDEO_TS.IFO"
22.02.2010 00:27:11.855:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VIDEO_TS.VOB"
22.02.2010 00:27:11.855:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VTS_01_1.VOB"
22.02.2010 00:27:11.885:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VTS_01_2.VOB"
22.02.2010 00:27:11.885:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VTS_01_0.IFO"
22.02.2010 00:27:11.905:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VTS_01_0.VOB"
22.02.2010 00:27:11.915:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VTS_02_1.VOB"
22.02.2010 00:27:11.915:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VTS_02_2.VOB"
22.02.2010 00:27:11.915:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VTS_02_0.IFO"
22.02.2010 00:27:11.915:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VTS_03_1.VOB"
22.02.2010 00:27:11.955:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VTS_03_2.VOB"
22.02.2010 00:27:11.985:   adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image wirklich_fertig_1\VTS_03_0.IFO"
22.02.2010 00:27:12.005:   Step 10 done
22.02.2010 00:27:12.015:   ------------ done ----------------
22.02.2010 00:27:12.015:   ------------ BurnToDisc ----------------
22.02.2010 00:27:12.015:   time:
22.02.2010 00:27:12.045:   Step 10 of 10
22.02.2010 00:27:12.045:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
22.02.2010 00:27:12.045:       Booktype:    don't care
22.02.2010 00:27:12.045:   setting write speed to 3324000  bytes/sec
22.02.2010 00:27:12.045:   this equals 2,400000x DVD / 18,843538x CD Speed
22.02.2010 00:27:12.045:   Check on previously direct recorded session...OK
22.02.2010 00:27:12.195:   AVSDK Message - INFO: :Recording volume ...
22.02.2010 00:27:12.195:   AVSDK Status - Begin operation Recording 2169152 sectors/frames
22.02.2010 00:27:12.195:   time:
22.02.2010 00:27:12.195:   AVSDK Message - INFO: :Recording -> writing data ...
22.02.2010 00:27:13.267:   wrote LeadIn, start DataCopy
22.02.2010 00:27:13.267:   time:
22.02.2010 00:27:53.434:   AVSDK Message - ERROR: :Cannot write to disc -> Power calibration or program memory area update failure (ASC/ASCQ 73/00)
22.02.2010 00:28:23.598:   AVSDK Status - End operation Recording 2169152 sectors/frames
22.02.2010 00:28:23.598:   AVSDK Message - INFO: :Recording failed due to write error on disc
22.02.2010 00:28:23.618:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
22.02.2010 00:28:23.628:   Step 10 done
22.02.2010 00:28:23.628:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 251 - write error occurred on disc !!!
22.02.2010 00:28:23.628:   ------------ done ----------------
22.02.2010 00:28:23.628:   time:
22.02.2010 00:28:23.628:   project burning failed
22.02.2010 00:28:23.638:   !!! DBK error in CBurnDevSupport::BurnProject(): 251 - write error occurred on disc !!!
22.02.2010 00:28:23.798:   !!! DBK error in BurnProject: 251 - write error occurred on disc !!!


Kommentare

Rosti schrieb am 22.02.2010 um 12:23 Uhr
1.
Wir benötigen NUR die Log-Datei des LETZTEN Brennversuchs - Du fängst bei "Adam und Eva" an ...!!!

2.
Es wundert mich nicht, dass die Brennversuche erfolglos waren: Du bist bei den "Brennroutinen" etwas hinterher - wir sind inzwischen bei 8.1.0.185 und Du bei 6.2.168 !!!

3.
Wahrscheinlich ist Deine Programmversion (welche hast Du) auch noch im jungfräulichen Zustand ...

4.
Link 1 für AKTUELLE Brennroutine
Link 2 für Programm-Update (in Abhängigkeit von Deiner Version !)

http://support.magix.net/magix_relaunch/php/page.php?page=download&cat=166

http://support.magix.net/magix_relaunch/php/page.php?page=download&cat=11277

Nachtrag:

Ich brenne so gut wie gar nicht mehr, deshalb weiss ich das jetzt nicht mehr so ganz genau:

ich glaube, dass VdL bei jedem Brennvorgang zusätzlich auch ein Image (im Ordner "Disc Image" - bei VdL) anliegt. Vielleicht ist das bei Deinem Programm auch so. Dann sind dort zumindest die encodierten Dateien vorhanden.

(Ich muss das mal ausprobieren ...)