Foto auf CD u. DVD10 Deluxe HD (sonderedition) Fotoshow wird beim Brennen abgebrochen

helmut_spichala schrieb am 01.11.2011 um 10:54 Uhr

Wer kann mir helfen, ich habe folgendes Problem.

Mein PC; Betriebssystem 64 Bit

                 Arbeitsspeicher (RAM) 6,0 GB

Beim Brennen einer Fotoshow wird der Brennvorgang immer abgebrochen mit folgender Fehlermeldung:

Interner Fehler während der Bearbeitung. Laufwerk wird nicht vollständig unterstützt.

Habe im Brennprogramm auf Bearbeiten unter Disc-Optionen auch mal versucht folgende Optionen auszuschalten: Filmmenü, Kapittelmenü und Video. Hat aber auch nichts gebracht.

Dieser Fehler tritt nicht immer an der selben Stelle auf. Bei einer Fotoshow von 30 Min., bei 8 bis 11 Min.

Hänge hier noch die dbk.log Datei an.

Vielleicht kann mir jemand helfen, vielen Dank.

 

-------------------------- 29.10.2011 15:20:13 --------------------------

29.10.2011 15:20:13.772:   DLLAV32.DLL loaded, all entry points available
29.10.2011 15:20:13.788:   AVSDK MsgCbFunc registered
29.10.2011 15:20:13.801:   AVSDK: StatCbFunc registered
29.10.2011 15:20:13.903:   AVSDK Version 9.0.193
29.10.2011 15:20:13.918:   ------------ Reading Device Info ----------------
29.10.2011 15:20:13.934:   AVSDK: 1 device(s) found
29.10.2011 15:20:13.947:   Adapter=1  ID=0  LUN=16   E:HL-DT-ST DVDRAM GH40N Revision:MC00
29.10.2011 15:20:13.961:   AVSDK: 1 record device(s) available
29.10.2011 15:20:13.974:   ------------ done ----------------
29.10.2011 15:20:14.200:   setting no speed limit
29.10.2011 15:20:14.214:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
29.10.2011 15:20:14.280:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
29.10.2011 15:20:14.294:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
29.10.2011 15:20:14.307:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
29.10.2011 15:21:31.143:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
29.10.2011 15:21:31.493:    DEVICE ARRIVED
29.10.2011 15:21:31.638:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (SK/ASC/ASCQ 05/24/00)
29.10.2011 15:21:46.184:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (SK/ASC/ASCQ 05/24/00)
29.10.2011 15:21:48.321:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (SK/ASC/ASCQ 05/24/00)
29.10.2011 15:21:48.348:   Open Project: 2011_Tom_u__Anna_in_KK -- dvd project 2011-10-29
29.10.2011 15:21:48.364:   VideoMode: PAL   Temp Dir: C:\Users\Helmut\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe_SE\Disc Images\
29.10.2011 15:21:48.380:   dll version 4.5.7.2
29.10.2011 15:21:48.394:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
29.10.2011 15:21:48.407:   EstimateLayerSplitPoint()...
29.10.2011 15:21:48.420:   Splitpunkt 4271833088 auf Disk mit Größe 1506705408
29.10.2011 15:21:48.434:   Title an Stelle 0, Länge 131072, Typ 0
29.10.2011 15:21:48.447:   Title an Stelle 131072, Länge 1506574336, Typ 1
29.10.2011 15:21:48.460:   ... Split möglich nach aktuellem Title, -> Abbruch
29.10.2011 15:22:23.675:   Step 1 of 4, Encodiere Film 1 ...
29.10.2011 15:48:33.719:   Step 1 done
29.10.2011 15:48:33.740:   Step 2 of 4, Encodiere Filmmenü ...
29.10.2011 15:49:25.472:   Step 2 done
29.10.2011 15:49:25.504:   ConvertMovie() - encoded file: C:\Users\Helmut\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe_SE\Disc Images\DVD Image 2011_Tom_u__Anna_in_KK\VTS_01_1.VOB
29.10.2011 15:49:25.517:   ConvertMovie() - encoded file: C:\Users\Helmut\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe_SE\Disc Images\DVD Image 2011_Tom_u__Anna_in_KK\VTS_01_2.VOB
29.10.2011 15:49:25.548:   Step 3 of 4, Disc Image wird erzeugt...
29.10.2011 15:49:39.637:   Step 3 done
29.10.2011 15:49:39.773:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (SK/ASC/ASCQ 05/24/00)
29.10.2011 15:49:41.910:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (SK/ASC/ASCQ 05/24/00)
29.10.2011 15:49:41.937:   Step 4 of 4
29.10.2011 15:49:41.954:   Step 4 done
29.10.2011 15:49:41.970:   ------------ InitializeBurningProcess Point ----------------
29.10.2011 15:49:42.041:   setting PoINT cache size to 16777216l
29.10.2011 15:49:42.276:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
29.10.2011 15:49:42.293:    Booktype: don't care
29.10.2011 15:49:42.318:   setting write speed to 5540000  bytes/sec
29.10.2011 15:49:42.331:   this equals 4,000000x DVD / 31,405895x CD Speed
29.10.2011 15:49:42.344:   ------------ done: succeeded ----------------
29.10.2011 15:49:42.358:   ------------ CreateAPIProject ----------------
29.10.2011 15:49:42.372:   Step 4 of 4
29.10.2011 15:49:42.400:   creating DVD project in prepfile mode...
29.10.2011 15:49:42.448:   create volume... OK
29.10.2011 15:49:42.464:   verify option OFF
29.10.2011 15:49:42.478:   adding file "C:\Users\Helmut\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe_SE\Disc Images\DVD Image 2011_Tom_u__Anna_in_KK\VIDEO_TS.IFO"
29.10.2011 15:49:42.517:   adding file "C:\Users\Helmut\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe_SE\Disc Images\DVD Image 2011_Tom_u__Anna_in_KK\VIDEO_TS.VOB"
29.10.2011 15:49:42.634:   adding file "C:\Users\Helmut\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe_SE\Disc Images\DVD Image 2011_Tom_u__Anna_in_KK\VTS_01_1.VOB"
29.10.2011 15:49:42.732:   adding file "C:\Users\Helmut\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe_SE\Disc Images\DVD Image 2011_Tom_u__Anna_in_KK\VTS_01_2.VOB"
29.10.2011 15:49:42.750:   adding file "C:\Users\Helmut\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe_SE\Disc Images\DVD Image 2011_Tom_u__Anna_in_KK\VTS_01_0.IFO"
29.10.2011 15:49:42.768:   Step 4 done
29.10.2011 15:49:42.782:   ------------ done ----------------
29.10.2011 15:49:42.796:   ------------ BurnToDisc ----------------
29.10.2011 15:49:42.809:   Step 4 of 4
29.10.2011 15:49:42.825:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
29.10.2011 15:49:42.839:    Booktype: don't care
29.10.2011 15:49:42.853:   setting write speed to 5540000  bytes/sec
29.10.2011 15:49:42.866:   this equals 4,000000x DVD / 31,405895x CD Speed
29.10.2011 15:49:42.868:   Check on previously direct recorded session...OK
29.10.2011 15:49:42.869:   -- Volume mounted --
29.10.2011 15:49:42.870:   -- Recording on "E: HL-DT-ST DVDRAM GH40N" --
29.10.2011 15:49:42.871:   -- Medium is "DVD+R" --
29.10.2011 15:49:42.872:   -- Manufacturer "" --
29.10.2011 15:49:42.896:   AVSDK Message - INFO: :Recording volume ...
29.10.2011 15:49:42.897:   AVSDK Status - Begin operation Recording 703392 sectors/frames
29.10.2011 15:49:42.899:   AVSDK Message - INFO: :Recording -> writing data ...
29.10.2011 15:49:47.891:   wrote LeadIn, start DataCopy
29.10.2011 15:53:16.453:   AVSDK Message - ERROR: :Cannot write to disc -> Power on, reset, or bus device reset occurred, possibly caused by malfunction of host adapter or drive (SK/ASC/ASCQ 06/29/00)
29.10.2011 15:53:16.786:   AVSDK Message - ERROR: :Cannot write or close track -> Drive not ready (SK/ASC/ASCQ 02/04/01)
29.10.2011 15:53:34.144:   AVSDK Status - End operation Recording 703392 sectors/frames
29.10.2011 15:53:34.146:   AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
29.10.2011 15:53:34.147:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 100 - drive not fully supported !!!
29.10.2011 15:53:34.148:   Step 4 done
29.10.2011 15:53:34.151:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 210 - drive not fully supported !!!
29.10.2011 15:53:34.152:   ------------ done ----------------
29.10.2011 15:53:34.153:   project burning failed
29.10.2011 15:53:34.208:   !!! DBK error in CBurnDevSupport::BurnProject(): 210 - drive not fully supported !!!
29.10.2011 15:53:34.218:   !!! DBK error in BurnProject: 210 - drive not fully supported !!!
29.10.2011 15:56:11.154:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
29.10.2011 15:56:11.156:    DEVICE REMOVAL
29.10.2011 15:56:36.500:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
29.10.2011 15:56:36.501:    DEVICE ARRIVED
29.10.2011 15:56:43.295:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
29.10.2011 16:11:47.726:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
29.10.2011 16:11:47.727:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
29.10.2011 16:11:47.728:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
 

Kommentare

helmut_spichala schrieb am 01.11.2011 um 17:21 Uhr

Hallo FredW,

danke für Deine schnelle Antwort. Habe einen Billig-Rohling verwendet. Morgen werde ich mit einem hochwertigen mein Glück versuchen.

Nochmals vielen Dank.

helmut_spichala schrieb am 02.11.2011 um 13:36 Uhr

Hallo FredW,

habe mit einer hochwertigen DVD mein Glück versucht. Hat bis auf ca. 5 Min. alles aufgespielt, danach aber leider wieder abgebrochen.

Schicke hier noch mal die dbk.log Datei.

Danke für die Bemühung

Gruß Helmut

 

-------------------------- 02.11.2011 11:43:06 --------------------------

02.11.2011 11:43:06.459:   DLLAV32.DLL loaded, all entry points available
02.11.2011 11:43:06.473:   AVSDK MsgCbFunc registered
02.11.2011 11:43:06.484:   AVSDK: StatCbFunc registered
02.11.2011 11:43:06.589:   AVSDK Version 9.0.193
02.11.2011 11:43:06.602:   ------------ Reading Device Info ----------------
02.11.2011 11:43:06.616:   AVSDK: 1 device(s) found
02.11.2011 11:43:06.629:   Adapter=1  ID=0  LUN=16   E:HL-DT-ST DVDRAM GH40N Revision:MC00
02.11.2011 11:43:06.641:   AVSDK: 1 record device(s) available
02.11.2011 11:43:06.653:   ------------ done ----------------
02.11.2011 11:43:06.872:   setting no speed limit
02.11.2011 11:43:06.883:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
02.11.2011 11:43:06.949:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
02.11.2011 11:43:06.963:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
02.11.2011 11:43:06.976:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
02.11.2011 11:43:33.128:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
02.11.2011 11:43:33.477:    DEVICE ARRIVED
02.11.2011 11:43:33.489:   AVSDK Message - ERROR: :Cannot open drive -> error code 14
02.11.2011 11:43:33.500:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
02.11.2011 11:43:33.512:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 202 - bad address given as parameter !!!
02.11.2011 11:43:33.679:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (SK/ASC/ASCQ 05/24/00)
02.11.2011 11:43:35.887:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (SK/ASC/ASCQ 05/24/00)
02.11.2011 11:43:35.914:   Open Project: 2011_Tom_u__Anna_in_KK -- dvd project 2011-11-02
02.11.2011 11:43:35.927:   VideoMode: PAL   Temp Dir: C:\Users\Helmut\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe_SE\Disc Images\
02.11.2011 11:43:35.941:   dll version 4.5.7.2
02.11.2011 11:43:35.956:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
02.11.2011 11:43:35.969:   EstimateLayerSplitPoint()...
02.11.2011 11:43:35.981:   Splitpunkt 4271833088 auf Disk mit Größe 1507328000
02.11.2011 11:43:35.993:   Title an Stelle 0, Länge 131072, Typ 0
02.11.2011 11:43:36.004:   Title an Stelle 131072, Länge 622592, Typ 0
02.11.2011 11:43:36.016:   Title an Stelle 753664, Länge 1506574336, Typ 1
02.11.2011 11:43:36.028:   ... Split möglich nach aktuellem Title, -> Abbruch
02.11.2011 11:43:39.528:   Step 1 of 6, Encodiere Film 1 ...
02.11.2011 12:09:34.545:   Step 1 done
02.11.2011 12:09:34.564:   Step 2 of 6, Encodiere Filmmenü ...
02.11.2011 12:10:26.630:   Step 2 done
02.11.2011 12:10:26.643:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
02.11.2011 12:10:52.522:   Step 3 done
02.11.2011 12:10:52.545:   ConvertMovie() - encoded file: C:\Users\Helmut\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe_SE\Disc Images\DVD Image 2011_Tom_u__Anna_in_KK\VTS_01_1.VOB
02.11.2011 12:10:52.556:   ConvertMovie() - encoded file: C:\Users\Helmut\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe_SE\Disc Images\DVD Image 2011_Tom_u__Anna_in_KK\VTS_01_2.VOB
02.11.2011 12:10:52.785:   Step 4 of 6, Disc Image wird erzeugt...
02.11.2011 12:11:07.095:   Step 4 done
02.11.2011 12:11:07.226:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (SK/ASC/ASCQ 05/24/00)
02.11.2011 12:11:09.369:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (SK/ASC/ASCQ 05/24/00)
02.11.2011 12:11:09.394:   Step 5 of 6
02.11.2011 12:11:09.408:   Step 5 done
02.11.2011 12:11:09.422:   ------------ InitializeBurningProcess Point ----------------
02.11.2011 12:11:09.492:   setting PoINT cache size to 16777216l
02.11.2011 12:11:09.531:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
02.11.2011 12:11:09.545:    Booktype: don't care
02.11.2011 12:11:09.567:   setting write speed to 5540000  bytes/sec
02.11.2011 12:11:09.579:   this equals 4,000000x DVD / 31,405895x CD Speed
02.11.2011 12:11:09.590:   ------------ done: succeeded ----------------
02.11.2011 12:11:09.601:   ------------ CreateAPIProject ----------------
02.11.2011 12:11:09.614:   Step 6 of 6
02.11.2011 12:11:09.626:   creating DVD project in prepfile mode...
02.11.2011 12:11:09.673:   create volume... OK
02.11.2011 12:11:09.686:   verify option OFF
02.11.2011 12:11:09.699:   adding file "C:\Users\Helmut\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe_SE\Disc Images\DVD Image 2011_Tom_u__Anna_in_KK\VIDEO_TS.IFO"
02.11.2011 12:11:09.858:   adding file "C:\Users\Helmut\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe_SE\Disc Images\DVD Image 2011_Tom_u__Anna_in_KK\VIDEO_TS.VOB"
02.11.2011 12:11:09.997:   adding file "C:\Users\Helmut\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe_SE\Disc Images\DVD Image 2011_Tom_u__Anna_in_KK\VTS_01_1.VOB"
02.11.2011 12:11:10.077:   adding file "C:\Users\Helmut\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe_SE\Disc Images\DVD Image 2011_Tom_u__Anna_in_KK\VTS_01_2.VOB"
02.11.2011 12:11:10.091:   adding file "C:\Users\Helmut\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe_SE\Disc Images\DVD Image 2011_Tom_u__Anna_in_KK\VTS_01_0.IFO"
02.11.2011 12:11:10.106:   adding file "C:\Users\Helmut\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe_SE\Disc Images\DVD Image 2011_Tom_u__Anna_in_KK\VTS_01_0.VOB"
02.11.2011 12:11:10.119:   Step 6 done
02.11.2011 12:11:10.132:   ------------ done ----------------
02.11.2011 12:11:10.133:   ------------ BurnToDisc ----------------
02.11.2011 12:11:10.135:   Step 6 of 6
02.11.2011 12:11:10.456:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
02.11.2011 12:11:10.458:    Booktype: don't care
02.11.2011 12:11:10.460:   setting write speed to 5540000  bytes/sec
02.11.2011 12:11:10.461:   this equals 4,000000x DVD / 31,405895x CD Speed
02.11.2011 12:11:10.462:   Check on previously direct recorded session...OK
02.11.2011 12:11:10.464:   -- Volume mounted --
02.11.2011 12:11:10.465:   -- Recording on "E: HL-DT-ST DVDRAM GH40N" --
02.11.2011 12:11:10.466:   -- Medium is "DVD+R" --
02.11.2011 12:11:10.468:   -- Manufacturer "" --
02.11.2011 12:11:10.491:   AVSDK Message - INFO: :Recording volume ...
02.11.2011 12:11:10.493:   AVSDK Status - Begin operation Recording 703744 sectors/frames
02.11.2011 12:11:10.495:   AVSDK Message - INFO: :Recording -> writing data ...
02.11.2011 12:11:15.096:   wrote LeadIn, start DataCopy
02.11.2011 12:38:22.511:   AVSDK Message - ERROR: :Cannot write to disc -> Power on, reset, or bus device reset occurred, possibly caused by malfunction of host adapter or drive (SK/ASC/ASCQ 06/29/00)
02.11.2011 12:38:23.591:   AVSDK Message - ERROR: :Cannot write or close track -> Drive not ready (SK/ASC/ASCQ 02/04/01)
02.11.2011 12:38:43.884:   AVSDK Status - End operation Recording 703744 sectors/frames
02.11.2011 12:38:43.885:   AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
02.11.2011 12:38:43.886:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 100 - drive not fully supported !!!
02.11.2011 12:38:43.888:   Step 6 done
02.11.2011 12:38:43.890:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 210 - drive not fully supported !!!
02.11.2011 12:38:43.892:   ------------ done ----------------
02.11.2011 12:38:43.893:   project burning failed
02.11.2011 12:38:43.947:   !!! DBK error in CBurnDevSupport::BurnProject(): 210 - drive not fully supported !!!
02.11.2011 12:38:43.984:   !!! DBK error in BurnProject: 210 - drive not fully supported !!!

helmut_spichala schrieb am 05.11.2011 um 16:48 Uhr

Ja, habe mit anderen Brennprogrammen ohne Probleme brennen können.

Rohlinge die man mir im Fachgeschäft empfohlen hat  , sind " Intenso Printable " - Intenso High Quality.

Vielleicht kann man mir noch irgendwie einen Rat mitteilen.

Gruß Helmut

helmut_spichala schrieb am 18.11.2011 um 17:52 Uhr

sorry, war mehrere Tage unterwegs.

Brennprogramm läuft immer noch nicht durch. Habe die neuesten Firmenupgrade durchgeführt.

Danke für die Hilfe.

helmut_spichala schrieb am 26.11.2011 um 17:26 Uhr

Hallo, hier die angeforderte dbk.log Datei. Ich würde mich freuen wenn sie weitere Aufschlüsse gibt.

Vielen Dank für die Hilfe. Gruß

          

-------------------------- 25.11.2011 17:19:47 --------------------------

25.11.2011 17:19:47.594:   DLLAV32.DLL loaded, all entry points available
25.11.2011 17:19:47.601:   AVSDK MsgCbFunc registered
25.11.2011 17:19:47.607:   AVSDK: StatCbFunc registered
25.11.2011 17:19:47.694:   AVSDK Version 9.0.193
25.11.2011 17:19:47.701:   ------------ Reading Device Info ----------------
25.11.2011 17:19:47.708:   AVSDK: 1 device(s) found
25.11.2011 17:19:47.714:   Adapter=1  ID=0  LUN=16   E:HL-DT-ST DVDRAM GH40N Revision:MC00
25.11.2011 17:19:47.721:   AVSDK: 1 record device(s) available
25.11.2011 17:19:47.728:   ------------ done ----------------
25.11.2011 17:19:47.944:   setting no speed limit
25.11.2011 17:19:53.548:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
25.11.2011 17:19:53.621:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
25.11.2011 17:19:53.628:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
25.11.2011 17:19:53.635:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
25.11.2011 17:19:59.594:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
25.11.2011 17:19:59.601:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
25.11.2011 17:19:59.608:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
25.11.2011 17:20:01.734:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
25.11.2011 17:20:01.741:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
25.11.2011 17:20:01.748:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
25.11.2011 17:20:01.757:   Open Project: 2011_Tom_u__Anna_in_KK -- dvd project 2011-11-25
25.11.2011 17:20:01.764:   VideoMode: PAL   Temp Dir: D:\
25.11.2011 17:20:01.770:   dll version 4.5.7.2
25.11.2011 17:20:01.778:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
25.11.2011 17:20:01.784:   EstimateLayerSplitPoint()...
25.11.2011 17:20:01.790:   Splitpunkt 4271833088 auf Disk mit Größe 1507328000
25.11.2011 17:20:01.796:   Title an Stelle 0, Länge 131072, Typ 0
25.11.2011 17:20:01.802:   Title an Stelle 131072, Länge 622592, Typ 0
25.11.2011 17:20:01.808:   Title an Stelle 753664, Länge 1506574336, Typ 1
25.11.2011 17:20:01.815:   ... Split möglich nach aktuellem Title, -> Abbruch
25.11.2011 17:20:01.822:   Step 1 of 6, Encodiere Film 1 ...
25.11.2011 17:20:47.623:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
25.11.2011 17:20:47.633:       DEVICE ARRIVED
25.11.2011 17:20:47.766:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (SK/ASC/ASCQ 05/24/00)
25.11.2011 17:45:51.567:   Step 1 done
25.11.2011 17:45:51.926:   Step 2 of 6, Encodiere Filmmenü ...
25.11.2011 17:46:20.356:   Step 2 done
25.11.2011 17:46:20.366:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
25.11.2011 17:46:46.219:   Step 3 done
25.11.2011 17:46:46.233:   ConvertMovie() - encoded file: D:\DVD Image 2011_Tom_u__Anna_in_KK\VTS_01_1.VOB
25.11.2011 17:46:46.240:   ConvertMovie() - encoded file: D:\DVD Image 2011_Tom_u__Anna_in_KK\VTS_01_2.VOB
25.11.2011 17:46:46.303:   Step 4 of 6, Disc Image wird erzeugt...
25.11.2011 17:47:01.659:   Step 4 done
25.11.2011 17:47:01.794:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (SK/ASC/ASCQ 05/24/00)
25.11.2011 17:47:03.927:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (SK/ASC/ASCQ 05/24/00)
25.11.2011 17:47:03.945:   Step 5 of 6
25.11.2011 17:47:03.954:   Step 5 done
25.11.2011 17:47:03.963:   ------------ InitializeBurningProcess Point ----------------
25.11.2011 17:47:04.033:   setting PoINT cache size to 16777216l
25.11.2011 17:47:04.040:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
25.11.2011 17:47:04.047:       Booktype:    don't care
25.11.2011 17:47:04.061:   setting write speed to 11080000  bytes/sec
25.11.2011 17:47:04.068:   this equals 8,000000x DVD / 62,811790x CD Speed
25.11.2011 17:47:04.075:   ------------ done: succeeded ----------------
25.11.2011 17:47:04.082:   ------------ CreateAPIProject ----------------
25.11.2011 17:47:04.090:   Step 6 of 6
25.11.2011 17:47:04.098:   creating DVD project in prepfile mode...
25.11.2011 17:47:04.108:   create volume... OK
25.11.2011 17:47:04.114:   verify option OFF
25.11.2011 17:47:04.143:   adding file "D:\DVD Image 2011_Tom_u__Anna_in_KK\VIDEO_TS.IFO"
25.11.2011 17:47:04.150:   adding file "D:\DVD Image 2011_Tom_u__Anna_in_KK\VIDEO_TS.VOB"
25.11.2011 17:47:04.188:   adding file "D:\DVD Image 2011_Tom_u__Anna_in_KK\VTS_01_1.VOB"
25.11.2011 17:47:04.195:   adding file "D:\DVD Image 2011_Tom_u__Anna_in_KK\VTS_01_2.VOB"
25.11.2011 17:47:04.203:   adding file "D:\DVD Image 2011_Tom_u__Anna_in_KK\VTS_01_0.IFO"
25.11.2011 17:47:04.205:   adding file "D:\DVD Image 2011_Tom_u__Anna_in_KK\VTS_01_0.VOB"
25.11.2011 17:47:04.208:   Step 6 done
25.11.2011 17:47:04.210:   ------------ done ----------------
25.11.2011 17:47:04.212:   ------------ BurnToDisc ----------------
25.11.2011 17:47:04.213:   Step 6 of 6
25.11.2011 17:47:04.217:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
25.11.2011 17:47:04.218:       Booktype:    don't care
25.11.2011 17:47:04.219:   setting write speed to 11080000  bytes/sec
25.11.2011 17:47:04.221:   this equals 8,000000x DVD / 62,811790x CD Speed
25.11.2011 17:47:04.222:   Check on previously direct recorded session...OK
25.11.2011 17:47:04.223:   -- Volume mounted --
25.11.2011 17:47:04.225:   -- Recording on "E: HL-DT-ST DVDRAM GH40N" --
25.11.2011 17:47:04.226:   -- Medium is "DVD+R" --
25.11.2011 17:47:04.227:   -- Manufacturer "" --
25.11.2011 17:47:04.256:   AVSDK Message - INFO: :Recording volume ...
25.11.2011 17:47:04.257:   AVSDK Status - Begin operation Recording 699952 sectors/frames
25.11.2011 17:47:04.260:   AVSDK Message - INFO: :Recording -> writing data ...
25.11.2011 17:47:04.739:   wrote LeadIn, start DataCopy
25.11.2011 17:48:39.085:   AVSDK Message - ERROR: :Cannot write to disc -> Power on, reset, or bus device reset occurred, possibly caused by malfunction of host adapter or drive (SK/ASC/ASCQ 06/29/00)
25.11.2011 17:48:39.419:   AVSDK Message - ERROR: :Cannot write or close track -> Drive not ready (SK/ASC/ASCQ 02/04/01)
25.11.2011 17:49:07.768:   AVSDK Status - End operation Recording 699952 sectors/frames
25.11.2011 17:49:07.769:   AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
25.11.2011 17:49:07.771:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 100 - drive not fully supported !!!
25.11.2011 17:49:07.772:   Step 6 done
25.11.2011 17:49:07.775:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 210 - drive not fully supported !!!
25.11.2011 17:49:07.776:   ------------ done ----------------
25.11.2011 17:49:07.777:   project burning failed
25.11.2011 17:49:07.843:   !!! DBK error in CBurnDevSupport::BurnProject(): 210 - drive not fully supported !!!
25.11.2011 17:49:07.868:   !!! DBK error in BurnProject: 210 - drive not fully supported !!!
 

helmut_spichala schrieb am 28.12.2011 um 18:07 Uhr

hallo, nachdem ich keine Antwort mehr bekommen habe, habe ich alles ruhen lassen. Bin erst mal in die Sonne gefahren. Dann kam Weihnachten.

Danach habe ich meinen PC gestartet. Es folgten einige Updates. Danach habe ich erneut meine Fotoshow gestartet - und siehe da, es geschah ein "Wunder". Es lief alles wie bei früheren Programmen, es wurde sogar eine DVD gebrannt. Wie so und warum es vorher nicht ging ist mir ein Rätsel.

Für die Hilfe vielen Dank, Gruß