Hallo liebes Forum,
habe ein großes Problem und weiß leider nicht weiter. Möchte meine Fotoshow brennen und es kommt immer wieder die selbe Fehlermeldung : Das Brennen wurde mit folgendem Fehler unterbrochen : Interner Fehler während der Bearbeitung Laufwerk nicht bereit. Das komische ist, die Meldung kommt immer zum schluss nach ca. 1 Stunde und 35 Minuten wo ich meine das er schon fast fertig ist mit der CD. Habe vor zwei Jahren schon eine Fotoshow gemacht und hatte überhaupt keine Probleme mit dem brennen. Das einzigste was anders war das ich Windows 7 hatte. Jetzt habe ich einen neuen Rechner und Windows 10. Hier die dbk-Datei :
19.08.2016 19:29:25.298: DLLAV32.DLL loaded, all entry points available
19.08.2016 19:29:25.306: AVSDK MsgCbFunc registered
19.08.2016 19:29:25.307: AVSDK: StatCbFunc registered
19.08.2016 19:29:25.343: AVSDK Version 11.0.233
19.08.2016 19:29:25.343: ------------ Reading Device Info ----------------
19.08.2016 19:29:25.344: AVSDK: 1 device(s) found
19.08.2016 19:29:25.344: BurnSupport: 1 device(s) found
19.08.2016 19:29:25.344: Adapter=0 ID=0 LUN=48 E:HL-DT-ST DVDRAM GUC0N Revision:1.00
19.08.2016 19:29:25.344: BurnSupport: 1 record device(s) available
19.08.2016 19:29:25.344: BurnSupport: E: HL-DT-ST DVDRAM GUC0N Rev. 1.00
19.08.2016 19:29:25.345: ------------ done ----------------
-------------------------- 21.11.2016 17:46:01 --------------------------
21.11.2016 17:46:01.461: DLLAV32.DLL loaded, all entry points available
21.11.2016 17:46:01.471: AVSDK MsgCbFunc registered
21.11.2016 17:46:01.472: AVSDK: StatCbFunc registered
21.11.2016 17:46:01.555: AVSDK Version 11.0.233
21.11.2016 17:46:01.556: ------------ Reading Device Info ----------------
21.11.2016 17:46:01.556: AVSDK: 1 device(s) found
21.11.2016 17:46:01.557: BurnSupport: 1 device(s) found
21.11.2016 17:46:01.558: Adapter=0 ID=0 LUN=48 E:HL-DT-ST DVDRAM GUC0N Revision:1.00
21.11.2016 17:46:01.560: BurnSupport: 1 record device(s) available
21.11.2016 17:46:01.560: BurnSupport: E: HL-DT-ST DVDRAM GUC0N Rev. 1.00
21.11.2016 17:46:01.561: ------------ done ----------------
21.11.2016 17:46:01.751: setting no speed limit
21.11.2016 17:46:01.752: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
21.11.2016 17:46:40.623: setting no speed limit
21.11.2016 17:46:55.903: setting no speed limit
21.11.2016 17:47:21.561: setting no speed limit
21.11.2016 17:47:29.159: setting no speed limit
21.11.2016 17:48:24.802: setting no speed limit
21.11.2016 17:49:24.587: setting no speed limit
21.11.2016 17:49:49.554: setting no speed limit
-------------------------- 21.11.2016 17:54:46 --------------------------
21.11.2016 17:54:46.421: DLLAV32.DLL loaded, all entry points available
21.11.2016 17:54:46.422: AVSDK MsgCbFunc registered
21.11.2016 17:54:46.423: AVSDK: StatCbFunc registered
21.11.2016 17:54:46.492: AVSDK Version 11.0.233
21.11.2016 17:54:46.492: ------------ Reading Device Info ----------------
21.11.2016 17:54:46.493: AVSDK: 1 device(s) found
21.11.2016 17:54:46.494: BurnSupport: 1 device(s) found
21.11.2016 17:54:46.495: Adapter=0 ID=0 LUN=48 E:HL-DT-ST DVDRAM GUC0N Revision:1.00
21.11.2016 17:54:46.495: BurnSupport: 1 record device(s) available
21.11.2016 17:54:46.496: BurnSupport: E: HL-DT-ST DVDRAM GUC0N Rev. 1.00
21.11.2016 17:54:46.496: ------------ done ----------------
21.11.2016 17:54:46.650: setting no speed limit
21.11.2016 17:54:46.652: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
-------------------------- 21.11.2016 17:55:55 --------------------------
21.11.2016 17:55:55.967: DLLAV32.DLL loaded, all entry points available
21.11.2016 17:55:55.968: AVSDK MsgCbFunc registered
21.11.2016 17:55:55.968: AVSDK: StatCbFunc registered
21.11.2016 17:55:56.035: AVSDK Version 11.0.233
21.11.2016 17:55:56.036: ------------ Reading Device Info ----------------
21.11.2016 17:55:56.036: AVSDK: 1 device(s) found
21.11.2016 17:55:56.037: BurnSupport: 1 device(s) found
21.11.2016 17:55:56.037: Adapter=0 ID=0 LUN=48 E:HL-DT-ST DVDRAM GUC0N Revision:1.00
21.11.2016 17:55:56.038: BurnSupport: 1 record device(s) available
21.11.2016 17:55:56.038: BurnSupport: E: HL-DT-ST DVDRAM GUC0N Rev. 1.00
21.11.2016 17:55:56.039: ------------ done ----------------
21.11.2016 17:55:56.200: setting no speed limit
21.11.2016 17:55:56.201: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
-------------------------- 21.11.2016 17:58:47 --------------------------
21.11.2016 17:58:47.174: DLLAV32.DLL loaded, all entry points available
21.11.2016 17:58:47.175: AVSDK MsgCbFunc registered
21.11.2016 17:58:47.176: AVSDK: StatCbFunc registered
21.11.2016 17:58:47.242: AVSDK Version 11.0.233
21.11.2016 17:58:47.243: ------------ Reading Device Info ----------------
21.11.2016 17:58:47.243: AVSDK: 1 device(s) found
21.11.2016 17:58:47.244: BurnSupport: 1 device(s) found
21.11.2016 17:58:47.245: Adapter=0 ID=0 LUN=48 E:HL-DT-ST DVDRAM GUC0N Revision:1.00
21.11.2016 17:58:47.246: BurnSupport: 1 record device(s) available
21.11.2016 17:58:47.247: BurnSupport: E: HL-DT-ST DVDRAM GUC0N Rev. 1.00
21.11.2016 17:58:47.248: ------------ done ----------------
21.11.2016 17:58:47.422: setting no speed limit
21.11.2016 17:58:47.423: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
-------------------------- 22.11.2016 14:27:10 --------------------------
22.11.2016 14:27:10.635: DLLAV32.DLL loaded, all entry points available
22.11.2016 14:27:10.635: AVSDK MsgCbFunc registered
22.11.2016 14:27:10.635: AVSDK: StatCbFunc registered
22.11.2016 14:27:10.713: AVSDK Version 11.0.233
22.11.2016 14:27:10.713: ------------ Reading Device Info ----------------
22.11.2016 14:27:10.713: AVSDK: 1 device(s) found
22.11.2016 14:27:10.713: BurnSupport: 1 device(s) found
22.11.2016 14:27:10.713: Adapter=0 ID=0 LUN=48 E:HL-DT-ST DVDRAM GUC0N Revision:1.00
22.11.2016 14:27:10.713: BurnSupport: 1 record device(s) available
22.11.2016 14:27:10.713: BurnSupport: E: HL-DT-ST DVDRAM GUC0N Rev. 1.00
22.11.2016 14:27:10.713: ------------ done ----------------
22.11.2016 14:27:10.869: setting no speed limit
22.11.2016 14:27:10.869: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
22.11.2016 14:38:48.098: setting no speed limit
22.11.2016 14:42:01.892: setting no speed limit
-------------------------- 22.11.2016 15:19:49 --------------------------
22.11.2016 15:19:49.525: DLLAV32.DLL loaded, all entry points available
22.11.2016 15:19:49.525: AVSDK MsgCbFunc registered
22.11.2016 15:19:49.525: AVSDK: StatCbFunc registered
22.11.2016 15:19:49.587: AVSDK Version 11.0.233
22.11.2016 15:19:49.587: ------------ Reading Device Info ----------------
22.11.2016 15:19:49.587: AVSDK: 1 device(s) found
22.11.2016 15:19:49.587: BurnSupport: 1 device(s) found
22.11.2016 15:19:49.587: Adapter=0 ID=0 LUN=48 E:HL-DT-ST DVDRAM GUC0N Revision:1.00
22.11.2016 15:19:49.587: BurnSupport: 1 record device(s) available
22.11.2016 15:19:49.587: BurnSupport: E: HL-DT-ST DVDRAM GUC0N Rev. 1.00
22.11.2016 15:19:49.587: ------------ done ----------------
22.11.2016 15:19:49.744: setting no speed limit
22.11.2016 15:19:49.744: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
-------------------------- 22.11.2016 16:45:01 --------------------------
22.11.2016 16:45:01.404: DLLAV32.DLL loaded, all entry points available
22.11.2016 16:45:01.405: AVSDK MsgCbFunc registered
22.11.2016 16:45:01.405: AVSDK: StatCbFunc registered
22.11.2016 16:45:01.473: AVSDK Version 11.0.233
22.11.2016 16:45:01.474: ------------ Reading Device Info ----------------
22.11.2016 16:45:01.475: AVSDK: 1 device(s) found
22.11.2016 16:45:01.476: BurnSupport: 1 device(s) found
22.11.2016 16:45:01.477: Adapter=0 ID=0 LUN=48 E:HL-DT-ST DVDRAM GUC0N Revision:1.00
22.11.2016 16:45:01.479: BurnSupport: 1 record device(s) available
22.11.2016 16:45:01.479: BurnSupport: E: HL-DT-ST DVDRAM GUC0N Rev. 1.00
22.11.2016 16:45:01.480: ------------ done ----------------
22.11.2016 16:45:01.656: setting no speed limit
22.11.2016 16:45:01.657: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
22.11.2016 16:47:47.515: setting no speed limit
-------------------------- 22.11.2016 16:50:09 --------------------------
22.11.2016 16:50:09.237: DLLAV32.DLL loaded, all entry points available
22.11.2016 16:50:09.238: AVSDK MsgCbFunc registered
22.11.2016 16:50:09.238: AVSDK: StatCbFunc registered
22.11.2016 16:50:09.312: AVSDK Version 11.0.233
22.11.2016 16:50:09.313: ------------ Reading Device Info ----------------
22.11.2016 16:50:09.313: AVSDK: 1 device(s) found
22.11.2016 16:50:09.314: BurnSupport: 1 device(s) found
22.11.2016 16:50:09.315: Adapter=0 ID=0 LUN=48 E:HL-DT-ST DVDRAM GUC0N Revision:1.00
22.11.2016 16:50:09.316: BurnSupport: 1 record device(s) available
22.11.2016 16:50:09.316: BurnSupport: E: HL-DT-ST DVDRAM GUC0N Rev. 1.00
22.11.2016 16:50:09.317: ------------ done ----------------
22.11.2016 16:50:09.482: setting no speed limit
22.11.2016 16:50:09.483: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
-------------------------- 22.11.2016 16:51:54 --------------------------
22.11.2016 16:51:54.445: DLLAV32.DLL loaded, all entry points available
22.11.2016 16:51:54.445: AVSDK MsgCbFunc registered
22.11.2016 16:51:54.446: AVSDK: StatCbFunc registered
22.11.2016 16:51:54.522: AVSDK Version 11.0.233
22.11.2016 16:51:54.522: ------------ Reading Device Info ----------------
22.11.2016 16:51:54.523: AVSDK: 1 device(s) found
22.11.2016 16:51:54.524: BurnSupport: 1 device(s) found
22.11.2016 16:51:54.525: Adapter=0 ID=0 LUN=48 E:HL-DT-ST DVDRAM GUC0N Revision:1.00
22.11.2016 16:51:54.525: BurnSupport: 1 record device(s) available
22.11.2016 16:51:54.526: BurnSupport: E: HL-DT-ST DVDRAM GUC0N Rev. 1.00
22.11.2016 16:51:54.527: ------------ done ----------------
22.11.2016 16:51:54.683: setting no speed limit
22.11.2016 16:51:54.684: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
22.11.2016 16:52:08.293: Error: Call to CheckHDAndDiscSpaceForProject() failed
22.11.2016 16:53:01.029: Error: Call to CheckHDAndDiscSpaceForProject() failed
22.11.2016 16:53:05.306: setting no speed limit
22.11.2016 16:53:09.757: Error: Call to CheckHDAndDiscSpaceForProject() failed
22.11.2016 16:53:38.934: setting no speed limit
22.11.2016 16:53:44.382: Open Project: Fotoshow_2016 -- dvd project 2016-11-22
22.11.2016 16:53:44.382: VideoMode: PAL Temp Dir: C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\
22.11.2016 16:53:44.384: dll version 4.8.8.1
22.11.2016 16:53:44.386: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
22.11.2016 16:53:44.386: EstimateLayerSplitPoint()...
22.11.2016 16:53:44.387: Splitpunkt 4271833088 auf Disk mit Größe 2791440384
22.11.2016 16:53:44.387: Title an Stelle 0, Länge 27099136, Typ 0
22.11.2016 16:53:44.388: Title an Stelle 27099136, Länge 1605632, Typ 0
22.11.2016 16:53:44.388: Title an Stelle 28704768, Länge 2762735616, Typ 1
22.11.2016 16:53:44.388: ... Split möglich nach aktuellem Title, -> Abbruch
22.11.2016 16:53:44.400: Step 1 of 5, Encodiere Film 1 ...
22.11.2016 17:07:10.104: Step 1 done
22.11.2016 17:07:10.107: Step 2 of 5, Encodiere Filmmenü ...
22.11.2016 17:07:18.381: Step 2 done
22.11.2016 17:07:18.383: Step 3 of 5, Encodiere Kapitelmenü 1 ...
22.11.2016 17:07:21.696: Step 3 done
22.11.2016 17:07:21.704: ConvertMovie() - encoded file: C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_1.VOB
22.11.2016 17:07:21.704: ConvertMovie() - encoded file: C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_2.VOB
22.11.2016 17:07:21.779: Step 4 of 5, Disc Image wird erzeugt...
22.11.2016 17:07:51.085: Step 4 done
22.11.2016 17:07:55.496: Step 5 of 5
22.11.2016 17:07:55.502: Step 5 done
22.11.2016 17:07:55.509: requested recorder feature:
22.11.2016 17:07:55.510: cache size: 16,000000.1 MB
22.11.2016 17:07:55.511: write speed: 5410,156250.1 KB/s
22.11.2016 17:07:55.512: book type: 0
22.11.2016 17:07:55.512: burn over: no
22.11.2016 17:07:55.513: simulate: no
22.11.2016 17:07:55.513: disc at once: no
22.11.2016 17:07:55.514: burn proof: yes
22.11.2016 17:07:55.514: format disc: no
22.11.2016 17:07:55.515: short leadout: no
22.11.2016 17:07:55.515: no defect mgmt: no
22.11.2016 17:07:55.515: verify after burn:no
22.11.2016 17:07:55.516: ------------ OpenRecorderSetOptions Point ----------------
22.11.2016 17:07:55.604: setting PoINT cache size to 16777216l
22.11.2016 17:07:55.606: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
22.11.2016 17:07:55.606: Booktype: don't care
22.11.2016 17:07:55.617: setting write speed to 5540000 bytes/sec
22.11.2016 17:07:55.617: this equals 4,000000x DVD / 31,405895x CD Speed
22.11.2016 17:07:55.619: ------------ done: succeeded ----------------
22.11.2016 17:07:55.619: ------------ CreateAPIProject ----------------
22.11.2016 17:07:55.623: Step 5 of 5
22.11.2016 17:07:55.629: creating DVD project in prepfile mode...
22.11.2016 17:07:55.636: create volume... OK
22.11.2016 17:07:55.637: verify option OFF
22.11.2016 17:07:55.637: set project options... OK
22.11.2016 17:07:55.639: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VIDEO_TS.IFO"
22.11.2016 17:07:55.643: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VIDEO_TS.VOB"
22.11.2016 17:07:55.647: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_1.VOB"
22.11.2016 17:07:55.650: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_2.VOB"
22.11.2016 17:07:55.651: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_0.IFO"
22.11.2016 17:07:55.652: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_0.VOB"
22.11.2016 17:07:55.653: Step 5 done
22.11.2016 17:07:55.654: ------------ done ----------------
22.11.2016 17:07:55.655: Step 5 of 5
22.11.2016 17:07:55.656: ------------ BurnToDisc ----------------
22.11.2016 17:07:55.657: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
22.11.2016 17:07:55.657: Booktype: don't care
22.11.2016 17:07:55.658: setting write speed to 5540000 bytes/sec
22.11.2016 17:07:55.658: this equals 4,000000x DVD / 31,405895x CD Speed
22.11.2016 17:07:55.658: mounting volume on device...OK
22.11.2016 17:07:55.658: Check on previously direct recorded session...OK
22.11.2016 17:07:55.659: -- Volume mounted --
22.11.2016 17:07:55.659: -- Recording on "E: HL-DT-ST DVDRAM GUC0N" --
22.11.2016 17:07:55.659: -- Medium is "DVD+R" --
22.11.2016 17:07:55.660: -- Manufacturer "AML" --
22.11.2016 17:07:55.701: AVSDK Message - INFO: :Recording volume ...
22.11.2016 17:07:55.701: AVSDK Status - Begin operation Recording 1060176 sectors/frames
22.11.2016 17:07:55.703: AVSDK Message - INFO: :Recording -> writing data ...
22.11.2016 17:07:56.418: wrote LeadIn, start DataCopy
22.11.2016 17:15:01.386: writing leadout and closing disc
22.11.2016 18:45:08.593: AVSDK Message - ERROR: :Cannot write or close track -> Drive not ready (SK/ASC/ASCQ 02/04/08)
22.11.2016 18:45:11.401: AVSDK Status - End operation Recording 1060176 sectors/frames
22.11.2016 18:45:11.402: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
22.11.2016 18:45:11.403: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 101 - drive not ready !!!
22.11.2016 18:45:11.404: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 211 - drive not ready !!!
22.11.2016 18:45:11.405: ------------ done ----------------
22.11.2016 18:45:11.406: Step 5 done
22.11.2016 18:45:11.410: project burning failed
22.11.2016 18:45:11.423: !!! DBK error in CBurnDevSupport::BurnProject(): 211 - drive not ready !!!
22.11.2016 18:45:11.569: !!! DBK error in BurnProject: 211 - drive not ready !!!
22.11.2016 18:45:30.670: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
22.11.2016 18:45:30.670: DEVICE REMOVAL
22.11.2016 18:46:08.423: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/02)
22.11.2016 18:46:08.424: !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
22.11.2016 18:46:08.424: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
-------------------------- 22.11.2016 18:47:22 --------------------------
22.11.2016 18:47:22.291: DLLAV32.DLL loaded, all entry points available
22.11.2016 18:47:22.291: AVSDK MsgCbFunc registered
22.11.2016 18:47:22.292: AVSDK: StatCbFunc registered
22.11.2016 18:47:22.346: AVSDK Version 11.0.233
22.11.2016 18:47:22.346: ------------ Reading Device Info ----------------
22.11.2016 18:47:22.346: AVSDK: 1 device(s) found
22.11.2016 18:47:22.347: BurnSupport: 1 device(s) found
22.11.2016 18:47:22.347: Adapter=0 ID=0 LUN=48 E:HL-DT-ST DVDRAM GUC0N Revision:1.00
22.11.2016 18:47:22.347: BurnSupport: 1 record device(s) available
22.11.2016 18:47:22.347: BurnSupport: E: HL-DT-ST DVDRAM GUC0N Rev. 1.00
22.11.2016 18:47:22.348: ------------ done ----------------
22.11.2016 18:47:22.547: setting no speed limit
22.11.2016 18:47:22.548: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
22.11.2016 18:47:48.094: Open Project: Fotoshow_2016 -- dvd project 2016-11-22
22.11.2016 18:47:48.095: VideoMode: PAL Temp Dir: C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\
22.11.2016 18:47:48.095: dll version 4.8.8.1
22.11.2016 18:47:48.098: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
22.11.2016 18:47:48.098: EstimateLayerSplitPoint()...
22.11.2016 18:47:48.099: Splitpunkt 4271833088 auf Disk mit Größe 2791440384
22.11.2016 18:47:48.099: Title an Stelle 0, Länge 27099136, Typ 0
22.11.2016 18:47:48.099: Title an Stelle 27099136, Länge 1605632, Typ 0
22.11.2016 18:47:48.100: Title an Stelle 28704768, Länge 2762735616, Typ 1
22.11.2016 18:47:48.100: ... Split möglich nach aktuellem Title, -> Abbruch
22.11.2016 18:48:06.670: Step 1 of 5, Encodiere Film 1 ...
22.11.2016 18:48:06.673: Step 1 done
22.11.2016 18:48:06.676: Step 2 of 5, Encodiere Filmmenü ...
22.11.2016 18:48:14.763: Step 2 done
22.11.2016 18:48:14.764: Step 3 of 5, Encodiere Kapitelmenü 1 ...
22.11.2016 18:48:17.679: Step 3 done
22.11.2016 18:48:17.686: ConvertMovie() - encoded file: C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_1.VOB
22.11.2016 18:48:17.686: ConvertMovie() - encoded file: C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_2.VOB
22.11.2016 18:48:17.802: Step 4 of 5, Disc Image wird erzeugt...
22.11.2016 18:48:46.460: Step 4 done
22.11.2016 18:48:50.686: Step 5 of 5
22.11.2016 18:48:50.688: Step 5 done
22.11.2016 18:48:50.689: requested recorder feature:
22.11.2016 18:48:50.689: cache size: 16,000000.1 MB
22.11.2016 18:48:50.690: write speed: 5410,156250.1 KB/s
22.11.2016 18:48:50.690: book type: 0
22.11.2016 18:48:50.690: burn over: no
22.11.2016 18:48:50.691: simulate: no
22.11.2016 18:48:50.691: disc at once: no
22.11.2016 18:48:50.691: burn proof: yes
22.11.2016 18:48:50.691: format disc: no
22.11.2016 18:48:50.692: short leadout: no
22.11.2016 18:48:50.692: no defect mgmt: no
22.11.2016 18:48:50.692: verify after burn:no
22.11.2016 18:48:50.693: ------------ OpenRecorderSetOptions Point ----------------
22.11.2016 18:48:50.780: setting PoINT cache size to 16777216l
22.11.2016 18:48:50.782: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
22.11.2016 18:48:50.782: Booktype: don't care
22.11.2016 18:48:50.792: setting write speed to 5540000 bytes/sec
22.11.2016 18:48:50.793: this equals 4,000000x DVD / 31,405895x CD Speed
22.11.2016 18:48:50.794: ------------ done: succeeded ----------------
22.11.2016 18:48:50.795: ------------ CreateAPIProject ----------------
22.11.2016 18:48:50.799: Step 5 of 5
22.11.2016 18:48:50.805: creating DVD project in prepfile mode...
22.11.2016 18:48:50.812: create volume... OK
22.11.2016 18:48:50.813: verify option OFF
22.11.2016 18:48:50.814: set project options... OK
22.11.2016 18:48:50.815: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VIDEO_TS.IFO"
22.11.2016 18:48:50.819: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VIDEO_TS.VOB"
22.11.2016 18:48:50.824: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_1.VOB"
22.11.2016 18:48:50.828: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_2.VOB"
22.11.2016 18:48:50.833: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_0.IFO"
22.11.2016 18:48:50.836: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_0.VOB"
22.11.2016 18:48:50.839: Step 5 done
22.11.2016 18:48:50.842: ------------ done ----------------
22.11.2016 18:48:50.843: Step 5 of 5
22.11.2016 18:48:50.846: ------------ BurnToDisc ----------------
22.11.2016 18:48:50.847: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
22.11.2016 18:48:50.848: Booktype: don't care
22.11.2016 18:48:50.848: setting write speed to 5540000 bytes/sec
22.11.2016 18:48:50.848: this equals 4,000000x DVD / 31,405895x CD Speed
22.11.2016 18:48:50.849: mounting volume on device...OK
22.11.2016 18:48:50.849: Check on previously direct recorded session...OK
22.11.2016 18:48:50.849: -- Volume mounted --
22.11.2016 18:48:50.850: -- Recording on "E: HL-DT-ST DVDRAM GUC0N" --
22.11.2016 18:48:50.850: -- Medium is "DVD+R" --
22.11.2016 18:48:50.850: -- Manufacturer "AML" --
22.11.2016 18:48:50.884: AVSDK Message - INFO: :Recording volume ...
22.11.2016 18:48:50.885: AVSDK Status - Begin operation Recording 1060176 sectors/frames
22.11.2016 18:48:50.889: AVSDK Message - INFO: :Recording -> writing data ...
22.11.2016 18:48:51.330: wrote LeadIn, start DataCopy
22.11.2016 18:55:56.554: writing leadout and closing disc
22.11.2016 20:26:03.952: AVSDK Message - ERROR: :Cannot write or close track -> Drive not ready (SK/ASC/ASCQ 02/04/08)
22.11.2016 20:26:06.722: AVSDK Status - End operation Recording 1060176 sectors/frames
22.11.2016 20:26:06.722: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
22.11.2016 20:26:06.723: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 101 - drive not ready !!!
22.11.2016 20:26:06.723: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 211 - drive not ready !!!
22.11.2016 20:26:06.723: ------------ done ----------------
22.11.2016 20:26:06.724: Step 5 done
22.11.2016 20:26:06.726: project burning failed
22.11.2016 20:26:06.733: !!! DBK error in CBurnDevSupport::BurnProject(): 211 - drive not ready !!!
22.11.2016 20:26:06.779: !!! DBK error in BurnProject: 211 - drive not ready !!!
22.11.2016 20:29:08.161: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
22.11.2016 20:29:08.161: DEVICE REMOVAL
-------------------------- 22.11.2016 20:41:10 --------------------------
22.11.2016 20:41:10.142: DLLAV32.DLL loaded, all entry points available
22.11.2016 20:41:10.142: AVSDK MsgCbFunc registered
22.11.2016 20:41:10.142: AVSDK: StatCbFunc registered
22.11.2016 20:41:10.242: AVSDK Version 11.0.233
22.11.2016 20:41:10.242: ------------ Reading Device Info ----------------
22.11.2016 20:41:10.242: AVSDK: 1 device(s) found
22.11.2016 20:41:10.242: BurnSupport: 1 device(s) found
22.11.2016 20:41:10.242: Adapter=0 ID=0 LUN=48 E:HL-DT-ST DVDRAM GUC0N Revision:1.00
22.11.2016 20:41:10.242: BurnSupport: 1 record device(s) available
22.11.2016 20:41:10.242: BurnSupport: E: HL-DT-ST DVDRAM GUC0N Rev. 1.00
22.11.2016 20:41:10.242: ------------ done ----------------
22.11.2016 20:41:10.427: setting no speed limit
22.11.2016 20:41:10.427: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
22.11.2016 20:41:21.338: Open Project: Fotoshow_2016 -- dvd project 2016-11-22
22.11.2016 20:41:21.338: VideoMode: PAL Temp Dir: C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\
22.11.2016 20:41:21.339: dll version 5.0.0.1
22.11.2016 20:41:21.342: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
22.11.2016 20:41:21.342: EstimateLayerSplitPoint()...
22.11.2016 20:41:21.342: Splitpunkt 4271833088 auf Disk mit Größe 2791440384
22.11.2016 20:41:21.342: Title an Stelle 0, Länge 27099136, Typ 0
22.11.2016 20:41:21.342: Title an Stelle 27099136, Länge 1605632, Typ 0
22.11.2016 20:41:21.342: Title an Stelle 28704768, Länge 2762735616, Typ 1
22.11.2016 20:41:21.342: ... Split möglich nach aktuellem Title, -> Abbruch
22.11.2016 20:41:32.387: Step 1 of 5, Encodiere Film 1 ...
22.11.2016 20:41:32.387: Step 1 done
22.11.2016 20:41:32.402: Step 2 of 5, Encodiere Filmmenü ...
22.11.2016 20:41:40.211: Step 2 done
22.11.2016 20:41:40.211: Step 3 of 5, Encodiere Kapitelmenü 1 ...
22.11.2016 20:41:42.915: Step 3 done
22.11.2016 20:41:42.930: ConvertMovie() - encoded file: C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_1.VOB
22.11.2016 20:41:42.930: ConvertMovie() - encoded file: C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_2.VOB
22.11.2016 20:41:43.014: Step 4 of 5, Disc Image wird erzeugt...
22.11.2016 20:42:06.366: Step 4 done
22.11.2016 20:42:10.494: Step 5 of 5
22.11.2016 20:42:10.494: Step 5 done
22.11.2016 20:42:10.563: requested recorder feature:
22.11.2016 20:42:10.563: cache size: 16,000000.1 MB
22.11.2016 20:42:10.563: write speed: 5410,156250.1 KB/s
22.11.2016 20:42:10.563: book type: 0
22.11.2016 20:42:10.563: burn over: no
22.11.2016 20:42:10.563: simulate: no
22.11.2016 20:42:10.563: disc at once: no
22.11.2016 20:42:10.563: burn proof: yes
22.11.2016 20:42:10.563: format disc: no
22.11.2016 20:42:10.563: short leadout: no
22.11.2016 20:42:10.563: no defect mgmt: no
22.11.2016 20:42:10.563: verify after burn:no
22.11.2016 20:42:10.563: ------------ OpenRecorderSetOptions Point ----------------
22.11.2016 20:42:10.648: setting PoINT cache size to 16777216l
22.11.2016 20:42:10.663: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
22.11.2016 20:42:10.663: Booktype: don't care
22.11.2016 20:42:10.663: setting write speed to 5540000 bytes/sec
22.11.2016 20:42:10.663: this equals 4,000000x DVD / 31,405895x CD Speed
22.11.2016 20:42:10.663: ------------ done: succeeded ----------------
22.11.2016 20:42:10.679: ------------ CreateAPIProject ----------------
22.11.2016 20:42:10.679: Step 5 of 5
22.11.2016 20:42:10.679: creating DVD project in prepfile mode...
22.11.2016 20:42:10.679: create volume... OK
22.11.2016 20:42:10.679: verify option OFF
22.11.2016 20:42:10.679: set project options... OK
22.11.2016 20:42:10.679: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VIDEO_TS.IFO"
22.11.2016 20:42:10.794: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VIDEO_TS.VOB"
22.11.2016 20:42:10.910: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_1.VOB"
22.11.2016 20:42:10.910: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_2.VOB"
22.11.2016 20:42:10.928: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_0.IFO"
22.11.2016 20:42:10.932: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_0.VOB"
22.11.2016 20:42:10.932: Step 5 done
22.11.2016 20:42:10.932: ------------ done ----------------
22.11.2016 20:42:10.932: Step 5 of 5
22.11.2016 20:42:10.932: ------------ BurnToDisc ----------------
22.11.2016 20:42:11.010: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
22.11.2016 20:42:11.010: Booktype: don't care
22.11.2016 20:42:11.010: setting write speed to 5540000 bytes/sec
22.11.2016 20:42:11.010: this equals 4,000000x DVD / 31,405895x CD Speed
22.11.2016 20:42:11.010: mounting volume on device...OK
22.11.2016 20:42:11.010: Check on previously direct recorded session...OK
22.11.2016 20:42:11.010: -- Volume mounted --
22.11.2016 20:42:11.010: -- Recording on "E: HL-DT-ST DVDRAM GUC0N" --
22.11.2016 20:42:11.010: -- Medium is "DVD+R" --
22.11.2016 20:42:11.010: -- Manufacturer "AML" --
22.11.2016 20:42:11.032: AVSDK Message - INFO: :Recording volume ...
22.11.2016 20:42:11.047: AVSDK Status - Begin operation Recording 1060176 sectors/frames
22.11.2016 20:42:11.047: AVSDK Message - INFO: :Recording -> writing data ...
22.11.2016 20:42:12.386: wrote LeadIn, start DataCopy
22.11.2016 20:49:15.677: writing leadout and closing disc
22.11.2016 22:19:22.464: AVSDK Message - ERROR: :Cannot write or close track -> Drive not ready (SK/ASC/ASCQ 02/04/08)
22.11.2016 22:19:25.176: AVSDK Status - End operation Recording 1060176 sectors/frames
22.11.2016 22:19:25.177: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
22.11.2016 22:19:25.179: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 101 - drive not ready !!!
22.11.2016 22:19:25.179: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 211 - drive not ready !!!
22.11.2016 22:19:25.181: ------------ done ----------------
22.11.2016 22:19:25.181: Step 5 done
22.11.2016 22:19:25.183: project burning failed
22.11.2016 22:19:25.192: !!! DBK error in CBurnDevSupport::BurnProject(): 211 - drive not ready !!!
22.11.2016 22:19:25.239: !!! DBK error in BurnProject: 211 - drive not ready !!!
22.11.2016 22:19:45.163: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
22.11.2016 22:19:45.163: DEVICE REMOVAL
-------------------------- 23.11.2016 10:31:09 --------------------------
23.11.2016 10:31:09.294: DLLAV32.DLL loaded, all entry points available
23.11.2016 10:31:09.316: AVSDK MsgCbFunc registered
23.11.2016 10:31:09.317: AVSDK: StatCbFunc registered
23.11.2016 10:31:09.376: AVSDK Version 11.0.233
23.11.2016 10:31:09.376: ------------ Reading Device Info ----------------
23.11.2016 10:31:09.377: AVSDK: 1 device(s) found
23.11.2016 10:31:09.377: BurnSupport: 1 device(s) found
23.11.2016 10:31:09.378: Adapter=0 ID=0 LUN=48 E:HL-DT-ST DVDRAM GUC0N Revision:1.00
23.11.2016 10:31:09.378: BurnSupport: 1 record device(s) available
23.11.2016 10:31:09.379: BurnSupport: E: HL-DT-ST DVDRAM GUC0N Rev. 1.00
23.11.2016 10:31:09.379: ------------ done ----------------
23.11.2016 10:31:09.570: setting no speed limit
23.11.2016 10:31:09.571: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
23.11.2016 10:31:09.603: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
23.11.2016 10:31:09.604: !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
23.11.2016 10:31:09.604: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
23.11.2016 10:31:15.728: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
23.11.2016 10:31:15.729: !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
23.11.2016 10:31:15.729: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
23.11.2016 10:31:17.816: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
23.11.2016 10:31:17.817: !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
23.11.2016 10:31:17.818: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
23.11.2016 10:31:17.824: Open Project: Fotoshow_2016 -- dvd project 2016-11-23
23.11.2016 10:31:17.825: VideoMode: PAL Temp Dir: C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\
23.11.2016 10:31:17.826: dll version 5.0.0.1
23.11.2016 10:31:17.831: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
23.11.2016 10:31:17.831: EstimateLayerSplitPoint()...
23.11.2016 10:31:17.833: Splitpunkt 4271833088 auf Disk mit Größe 2791440384
23.11.2016 10:31:17.834: Title an Stelle 0, Länge 27099136, Typ 0
23.11.2016 10:31:17.835: Title an Stelle 27099136, Länge 1605632, Typ 0
23.11.2016 10:31:17.835: Title an Stelle 28704768, Länge 2762735616, Typ 1
23.11.2016 10:31:17.836: ... Split möglich nach aktuellem Title, -> Abbruch
23.11.2016 10:31:21.553: Step 1 of 5, Encodiere Film 1 ...
23.11.2016 10:31:21.556: Step 1 done
23.11.2016 10:31:21.559: Step 2 of 5, Encodiere Filmmenü ...
23.11.2016 10:31:29.655: Step 2 done
23.11.2016 10:31:29.657: Step 3 of 5, Encodiere Kapitelmenü 1 ...
23.11.2016 10:31:32.392: Step 3 done
23.11.2016 10:31:32.398: ConvertMovie() - encoded file: C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_1.VOB
23.11.2016 10:31:32.399: ConvertMovie() - encoded file: C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_2.VOB
23.11.2016 10:31:32.482: Step 4 of 5, Disc Image wird erzeugt...
23.11.2016 10:31:58.534: Step 4 done
23.11.2016 10:31:58.601: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
23.11.2016 10:31:58.611: !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
23.11.2016 10:31:58.611: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
23.11.2016 10:35:15.596: !!! DBK error in BurnProject: 1 - user cancelled operation !!!
23.11.2016 10:36:02.174: Open Project: Fotoshow_2016 -- dvd project 2016-11-23
23.11.2016 10:36:02.175: VideoMode: PAL Temp Dir: C:\Users\Christopher\Videos\
23.11.2016 10:36:02.175: dll version 5.0.0.1
23.11.2016 10:36:02.177: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
23.11.2016 10:36:02.177: EstimateLayerSplitPoint()...
23.11.2016 10:36:02.178: Splitpunkt 4271833088 auf Disk mit Größe 2791440384
23.11.2016 10:36:02.178: Title an Stelle 0, Länge 27099136, Typ 0
23.11.2016 10:36:02.179: Title an Stelle 27099136, Länge 1605632, Typ 0
23.11.2016 10:36:02.179: Title an Stelle 28704768, Länge 2762735616, Typ 1
23.11.2016 10:36:02.179: ... Split möglich nach aktuellem Title, -> Abbruch
23.11.2016 10:36:02.195: Step 1 of 4, Encodiere Film 1 ...
23.11.2016 10:50:19.526: Step 1 done
23.11.2016 10:50:19.558: Step 2 of 4, Encodiere Filmmenü ...
23.11.2016 10:50:28.475: Step 2 done
23.11.2016 10:50:28.477: Step 3 of 4, Encodiere Kapitelmenü 1 ...
23.11.2016 10:50:31.739: Step 3 done
23.11.2016 10:50:31.781: ConvertMovie() - encoded file: C:\Users\Christopher\Videos\VTS_01_1.VOB
23.11.2016 10:50:31.782: ConvertMovie() - encoded file: C:\Users\Christopher\Videos\VTS_01_2.VOB
23.11.2016 10:50:31.917: Step 4 of 4, Disc Image wird erzeugt...
23.11.2016 10:50:58.915: Step 4 done
-------------------------- 05.12.2016 17:12:37 --------------------------
05.12.2016 17:12:37.467: DLLAV32.DLL loaded, all entry points available
05.12.2016 17:12:37.476: AVSDK MsgCbFunc registered
05.12.2016 17:12:37.477: AVSDK: StatCbFunc registered
05.12.2016 17:12:37.660: AVSDK Version 11.0.233
05.12.2016 17:12:37.660: ------------ Reading Device Info ----------------
05.12.2016 17:12:37.661: AVSDK: 1 device(s) found
05.12.2016 17:12:37.661: BurnSupport: 1 device(s) found
05.12.2016 17:12:37.661: Adapter=0 ID=0 LUN=48 E:HL-DT-ST DVDRAM GUC0N Revision:1.00
05.12.2016 17:12:37.662: BurnSupport: 1 record device(s) available
05.12.2016 17:12:37.662: BurnSupport: E: HL-DT-ST DVDRAM GUC0N Rev. 1.00
05.12.2016 17:12:37.662: ------------ done ----------------
05.12.2016 17:12:37.841: setting no speed limit
05.12.2016 17:12:37.843: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
05.12.2016 17:14:23.750: Open Project: Fotoshow_2016 -- dvd project 2016-12-05
05.12.2016 17:14:23.750: VideoMode: PAL Temp Dir: C:\Users\Christopher\Videos\
05.12.2016 17:14:23.751: dll version 5.0.0.1
05.12.2016 17:14:23.752: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
05.12.2016 17:14:23.752: EstimateLayerSplitPoint()...
05.12.2016 17:14:23.753: Splitpunkt 4271833088 auf Disk mit Größe 2791440384
05.12.2016 17:14:23.754: Title an Stelle 0, Länge 27099136, Typ 0
05.12.2016 17:14:23.754: Title an Stelle 27099136, Länge 1605632, Typ 0
05.12.2016 17:14:23.754: Title an Stelle 28704768, Länge 2762735616, Typ 1
05.12.2016 17:14:23.755: ... Split möglich nach aktuellem Title, -> Abbruch
05.12.2016 17:14:23.763: Step 1 of 4, Encodiere Film 1 ...
05.12.2016 17:18:45.337: Step 1 done
05.12.2016 17:18:45.345: ERROR: PrepareDVDVideoFiles() failed with errNo 11 - user cancelled
05.12.2016 17:18:45.346: !!! DBK error in BurnProject: 1 - user cancelled operation !!!
05.12.2016 17:18:57.708: setting no speed limit
05.12.2016 17:20:00.179: Open Project: Fotoshow_2016 -- dvd project 2016-12-05
05.12.2016 17:20:00.180: VideoMode: PAL Temp Dir: C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\
05.12.2016 17:20:00.181: dll version 5.0.0.1
05.12.2016 17:20:00.186: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
05.12.2016 17:20:00.186: EstimateLayerSplitPoint()...
05.12.2016 17:20:00.188: Splitpunkt 4271833088 auf Disk mit Größe 2791440384
05.12.2016 17:20:00.188: Title an Stelle 0, Länge 27099136, Typ 0
05.12.2016 17:20:00.189: Title an Stelle 27099136, Länge 1605632, Typ 0
05.12.2016 17:20:00.190: Title an Stelle 28704768, Länge 2762735616, Typ 1
05.12.2016 17:20:00.190: ... Split möglich nach aktuellem Title, -> Abbruch
05.12.2016 17:20:17.303: Step 1 of 5, Encodiere Film 1 ...
05.12.2016 17:20:17.318: Step 1 done
05.12.2016 17:20:17.328: ConvertMovie() - encoded file: C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_1.VOB
05.12.2016 17:20:17.328: ConvertMovie() - encoded file: C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_2.VOB
05.12.2016 17:20:17.343: Step 2 of 5, Disc Image wird erzeugt...
05.12.2016 17:20:17.346: Step 2 done
05.12.2016 17:20:19.677: Step 3 of 5
05.12.2016 17:20:19.680: Step 3 done
05.12.2016 17:20:19.682: requested recorder feature:
05.12.2016 17:20:19.682: cache size: 16,000000.1 MB
05.12.2016 17:20:19.683: write speed: 10820,312500.1 KB/s
05.12.2016 17:20:19.683: book type: 0
05.12.2016 17:20:19.683: burn over: no
05.12.2016 17:20:19.683: simulate: no
05.12.2016 17:20:19.684: disc at once: no
05.12.2016 17:20:19.684: burn proof: yes
05.12.2016 17:20:19.684: format disc: no
05.12.2016 17:20:19.685: short leadout: no
05.12.2016 17:20:19.685: no defect mgmt: no
05.12.2016 17:20:19.685: verify after burn:no
05.12.2016 17:20:19.685: ------------ OpenRecorderSetOptions Point ----------------
05.12.2016 17:20:19.760: setting PoINT cache size to 16777216l
05.12.2016 17:20:19.762: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
05.12.2016 17:20:19.763: Booktype: don't care
05.12.2016 17:20:19.763: setting write speed to 11080000 bytes/sec
05.12.2016 17:20:19.764: this equals 8,000000x DVD / 62,811790x CD Speed
05.12.2016 17:20:19.765: ------------ done: succeeded ----------------
05.12.2016 17:20:19.765: ------------ CreateAPIProject ----------------
05.12.2016 17:20:19.769: Step 4 of 5
05.12.2016 17:20:19.775: creating DVD project in prepfile mode...
05.12.2016 17:20:19.783: create volume... OK
05.12.2016 17:20:19.783: verify option OFF
05.12.2016 17:20:19.784: set project options... OK
05.12.2016 17:20:19.785: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VIDEO_TS.IFO"
05.12.2016 17:20:19.788: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VIDEO_TS.VOB"
05.12.2016 17:20:19.791: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_1.VOB"
05.12.2016 17:20:19.793: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_2.VOB"
05.12.2016 17:20:19.794: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_0.IFO"
05.12.2016 17:20:19.795: adding file "C:\Users\Christopher\Documents\MAGIX\Fotos auf DVD 2013 Deluxe\Disc Images\DVD Image Fotoshow_2016\VTS_01_0.VOB"
05.12.2016 17:20:19.796: Step 4 done
05.12.2016 17:20:19.797: ------------ done ----------------
05.12.2016 17:20:19.798: Step 5 of 5
05.12.2016 17:20:19.799: ------------ BurnToDisc ----------------
05.12.2016 17:20:19.800: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
05.12.2016 17:20:19.801: Booktype: don't care
05.12.2016 17:20:19.801: setting write speed to 11080000 bytes/sec
05.12.2016 17:20:19.801: this equals 8,000000x DVD / 62,811790x CD Speed
05.12.2016 17:20:19.801: mounting volume on device...OK
05.12.2016 17:20:19.802: Check on previously direct recorded session...OK
05.12.2016 17:20:19.802: -- Volume mounted --
05.12.2016 17:20:19.802: -- Recording on "E: HL-DT-ST DVDRAM GUC0N" --
05.12.2016 17:20:19.803: -- Medium is "DVD+R" --
05.12.2016 17:20:19.803: -- Manufacturer "AML" --
05.12.2016 17:20:19.825: AVSDK Message - INFO: :Recording volume ...
05.12.2016 17:20:19.826: AVSDK Status - Begin operation Recording 1060176 sectors/frames
05.12.2016 17:20:19.828: AVSDK Message - INFO: :Recording -> writing data ...
05.12.2016 17:20:19.913: wrote LeadIn, start DataCopy
05.12.2016 17:26:11.625: writing leadout and closing disc
05.12.2016 18:56:16.470: AVSDK Message - ERROR: :Cannot write or close track -> Drive not ready (SK/ASC/ASCQ 02/04/08)
05.12.2016 18:56:19.337: AVSDK Status - End operation Recording 1060176 sectors/frames
05.12.2016 18:56:19.338: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
05.12.2016 18:56:19.339: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 101 - drive not ready !!!
05.12.2016 18:56:19.339: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 211 - drive not ready !!!
05.12.2016 18:56:19.340: ------------ done ----------------
05.12.2016 18:56:19.340: Step 5 done
05.12.2016 18:56:19.342: project burning failed
05.12.2016 18:56:19.424: !!! DBK error in CBurnDevSupport::BurnProject(): 211 - drive not ready !!!
05.12.2016 18:56:19.425: !!! DBK error in BurnProject: 211 - drive not ready !!!
Hoffe ihr könnt mir helfen ich brauche den Film unbedingt bis Weihnachten.
Besten Dank im Voraus.
Christopher