Brennabbruch mit Fotos auf CD und DVD 8 deluxe

Impulsantwort schrieb am 04.10.2011 um 14:36 Uhr

Hallo !

Ich habe ein kleines Problem mit dem Programm Fotos auf CD und DVD 8 deluxe. Und zwar bricht das Programm beim schreiben des Leadout mit "Interner Fehler" ab. Jetzt kommt das Seltsame : Wenn ich das Projekt nochmal brenne und bei "Projekt verwenden oder neu encodieren" auf "verwenden" klicke, dann funktioniert alles einwandfrei. Lasse ich das gleiche Projekt jedoch neu encodieren, bricht das Programm wieder beim Leadout ab ...

Bisherige Massnahmen (ohne Erfolg) :

- Vorher Brennen simuliert (Simulation ist immer o.k. - der Brennvorgang jedoch nicht)

- Firmware des Brenners ist aktuell

- Magix Brennroutinen sind aktuell

- Es ist kein Nero installiert (nur das Freeware-Tool XPBurner)

- Verschiedene Rohlinge ausprobiert (sowohl CD wie auch DVD)

- Windows XP aktuelles Update aufgespielt

- Magix Update aufgespielt

Ich betone nochmal, das die Daten komplett geschrieben werden und erst wenn Unten im Fenster "Writing Leadout" erscheint, kommt kurz danach der Interne Fehler.

Vielen Dank schonmal für Eure Hinweise !

 

Hier noch das Logfile vom letzten Versuch :


-------------------------- 27.01.2011 17:38:36 --------------------------

27.01.2011 17:38:36.437:   DLLAV32.DLL loaded, all entry points available
27.01.2011 17:38:36.453:   AVSDK MsgCbFunc registered
27.01.2011 17:38:36.453:   AVSDK: StatCbFunc registered
27.01.2011 17:38:36.468:   AVSDK Message - WARNING: :Unable to get SCSI INQUIRY data of '\\.\Scsi0:'. Some devices may not be available.
27.01.2011 17:38:36.640:   AVSDK Version 6.2.160
27.01.2011 17:38:36.640:   ------------ Reading Device Info ----------------
27.01.2011 17:38:36.640:   AVSDK: 2 device(s) found
27.01.2011 17:38:36.640:   Adapter=1  ID=3  LUN=0   G:BENQ DVD DD DW1620 Revision:B7W9
27.01.2011 17:38:36.640:   AVSDK: 1 record device(s) available
27.01.2011 17:38:36.640:   ------------ done ----------------

-------------------------- 30.09.2011 19:28:42 --------------------------

30.09.2011 19:28:42.000:   DLLAV32.DLL loaded, all entry points available
30.09.2011 19:28:42.000:   AVSDK MsgCbFunc registered
30.09.2011 19:28:42.000:   AVSDK: StatCbFunc registered
30.09.2011 19:28:42.000:   AVSDK Message - WARNING: :Unable to get SCSI INQUIRY data of '\\.\Scsi0:'. Some devices may not be available.
30.09.2011 19:28:43.156:   AVSDK Version 6.2.168
30.09.2011 19:28:43.156:   ------------ Reading Device Info ----------------
30.09.2011 19:28:43.156:   AVSDK: 2 device(s) found
30.09.2011 19:28:43.156:   Adapter=1  ID=3  LUN=0   G:BENQ DVD DD DW1620 Revision:B7W9
30.09.2011 19:28:43.156:   AVSDK: 1 record device(s) available
30.09.2011 19:28:43.156:   ------------ done ----------------
30.09.2011 19:28:43.156:   setting no speed limit
30.09.2011 19:28:43.156:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
30.09.2011 19:28:43.218:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
30.09.2011 19:30:28.312:   setting no speed limit
30.09.2011 19:30:28.484:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
30.09.2011 19:32:25.125:   setting no speed limit
30.09.2011 19:32:25.281:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
30.09.2011 19:33:58.015:   setting no speed limit
30.09.2011 19:33:58.187:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
30.09.2011 19:34:29.265:   setting no speed limit
30.09.2011 19:34:29.406:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
30.09.2011 19:36:12.000:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
30.09.2011 19:36:14.078:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
30.09.2011 19:36:16.562:   Open Project: Disc_2011-09-30 -- dvd project 2011-09-30
30.09.2011 19:36:16.562:   VideoMode: PAL   Temp Dir: E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\
30.09.2011 19:36:16.562:   dll version 8.0.5.3
30.09.2011 19:36:16.562:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
30.09.2011 19:36:16.562:   EstimateLayerSplitPoint()...
30.09.2011 19:36:16.562:   Splitpunkt 4271833088 auf Disk mit Größe 99516416
30.09.2011 19:36:16.562:   Title an Stelle 0, Länge 131072, Typ 0
30.09.2011 19:36:16.562:   Title an Stelle 131072, Länge 229376, Typ 0
30.09.2011 19:36:16.562:   Title an Stelle 360448, Länge 99155968, Typ 1
30.09.2011 19:36:16.562:   ... Split möglich nach aktuellem Title, -> Abbruch
30.09.2011 19:36:16.562:   Step 1 of 6, Encodiere Film 1 ...
30.09.2011 19:38:10.750:   Step 1 done
30.09.2011 19:38:10.750:   Step 2 of 6, Encodiere Filmmenü ...
30.09.2011 19:38:11.125:   Step 2 done
30.09.2011 19:38:11.125:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
30.09.2011 19:38:12.109:   Step 3 done
30.09.2011 19:38:12.109:   ConvertMovie() - encoded file: E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-09-30\VTS_01_1.VOB
30.09.2011 19:38:12.109:   Step 4 of 6, Erzeuge Disc-Image ...
30.09.2011 19:38:12.859:   Step 4 done
30.09.2011 19:38:13.062:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
30.09.2011 19:38:24.062:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
30.09.2011 19:38:26.156:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
30.09.2011 19:38:26.156:   Step 5 of 6
30.09.2011 19:38:26.156:   Step 5 done
30.09.2011 19:38:26.156:   ------------ InitializeBurningProcess Point ----------------
30.09.2011 19:38:26.218:   setting PoINT cache size to 16777216l
30.09.2011 19:38:26.234:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
30.09.2011 19:38:26.250:    Booktype: don't care
30.09.2011 19:38:26.250:   setting write speed to 2822000  bytes/sec
30.09.2011 19:38:26.250:   this equals 2,037545x DVD / 15,997733x CD Speed
30.09.2011 19:38:26.250:   ------------ done: succeeded ----------------
30.09.2011 19:38:26.250:   ------------ CreateAPIProject ----------------
30.09.2011 19:38:26.265:   Step 6 of 6
30.09.2011 19:38:26.265:   creating DVD project in prepfile mode...
30.09.2011 19:38:26.265:   create volume... OK
30.09.2011 19:38:26.265:   verify option OFF
30.09.2011 19:38:26.265:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-09-30\VIDEO_TS.IFO"
30.09.2011 19:38:26.265:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-09-30\VIDEO_TS.VOB"
30.09.2011 19:38:26.265:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-09-30\VTS_01_1.VOB"
30.09.2011 19:38:26.265:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-09-30\VTS_01_0.IFO"
30.09.2011 19:38:26.265:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-09-30\VTS_01_0.VOB"
30.09.2011 19:38:26.265:   Step 6 done
30.09.2011 19:38:26.265:   ------------ done ----------------
30.09.2011 19:38:26.265:   ------------ BurnToDisc ----------------
30.09.2011 19:38:26.265:   time:
30.09.2011 19:38:26.296:   Step 6 of 6
30.09.2011 19:38:26.296:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
30.09.2011 19:38:26.296:    Booktype: don't care
30.09.2011 19:38:26.296:   setting write speed to 2822000  bytes/sec
30.09.2011 19:38:26.296:   this equals 2,037545x DVD / 15,997733x CD Speed
30.09.2011 19:38:26.296:   Check on previously direct recorded session...OK
30.09.2011 19:38:26.312:   AVSDK Message - INFO: :Recording volume ...
30.09.2011 19:38:26.312:   AVSDK Status - Begin operation Recording 32311 sectors/frames
30.09.2011 19:38:26.312:   time:
30.09.2011 19:38:26.312:   AVSDK Message - INFO: :Recording -> writing data ...
30.09.2011 19:38:26.437:   wrote LeadIn, start DataCopy
30.09.2011 19:38:26.437:   time:
30.09.2011 19:38:40.234:   AVSDK Message - ERROR: :Cannot write to disc -> End of user area encountered on this track (ASC/ASCQ 63/00)
30.09.2011 19:39:04.406:   AVSDK Status - End operation Recording 32311 sectors/frames
30.09.2011 19:39:04.406:   AVSDK Message - INFO: :Recording failed due to write error on disc
30.09.2011 19:39:04.406:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
30.09.2011 19:39:04.406:   Step 6 done
30.09.2011 19:39:04.406:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 251 - write error occurred on disc !!!
30.09.2011 19:39:04.406:   ------------ done ----------------
30.09.2011 19:39:04.406:   time:
30.09.2011 19:39:04.406:   project burning failed
30.09.2011 19:39:04.421:   !!! DBK error in CBurnDevSupport::BurnProject(): 251 - write error occurred on disc !!!
30.09.2011 19:39:04.421:   !!! DBK error in BurnProject: 251 - write error occurred on disc !!!
30.09.2011 19:39:37.750:   setting no speed limit
30.09.2011 19:39:47.359:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive g:
30.09.2011 19:39:47.359:    DEVICE ARRIVED
30.09.2011 19:39:47.359:   AVSDK Message - ERROR: :Cannot open drive -> error code 14
30.09.2011 19:39:47.359:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
30.09.2011 19:39:47.359:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 203 - burn support - open device failed !!!
30.09.2011 19:39:48.015:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
30.09.2011 19:39:48.031:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!

-------------------------- 01.10.2011 14:32:52 --------------------------

01.10.2011 14:32:52.328:   DLLAV32.DLL loaded, all entry points available
01.10.2011 14:32:52.343:   AVSDK MsgCbFunc registered
01.10.2011 14:32:52.343:   AVSDK: StatCbFunc registered
01.10.2011 14:32:52.343:   AVSDK Message - WARNING: :Unable to get SCSI INQUIRY data of '\\.\Scsi0:'. Some devices may not be available.
01.10.2011 14:32:52.468:   AVSDK Version 6.2.168
01.10.2011 14:32:52.468:   ------------ Reading Device Info ----------------
01.10.2011 14:32:52.468:   AVSDK: 2 device(s) found
01.10.2011 14:32:52.468:   Adapter=1  ID=3  LUN=0   G:BENQ DVD DD DW1620 Revision:B7W9
01.10.2011 14:32:52.468:   AVSDK: 1 record device(s) available
01.10.2011 14:32:52.468:   ------------ done ----------------
01.10.2011 14:33:04.546:   setting no speed limit
01.10.2011 14:33:04.546:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
01.10.2011 14:33:11.859:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive g:
01.10.2011 14:33:11.859:    DEVICE ARRIVED
01.10.2011 14:33:11.875:   AVSDK Message - ERROR: :Cannot open drive -> error code 14
01.10.2011 14:33:11.875:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
01.10.2011 14:33:11.875:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 203 - burn support - open device failed !!!
01.10.2011 14:33:12.421:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 14:33:12.453:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
01.10.2011 14:33:15.796:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 14:33:15.796:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
01.10.2011 14:34:23.453:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive g:
01.10.2011 14:34:23.453:    DEVICE ARRIVED
01.10.2011 14:34:23.500:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
01.10.2011 14:34:23.515:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
01.10.2011 14:34:23.515:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
01.10.2011 14:34:36.609:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive g:
01.10.2011 14:34:36.609:    DEVICE ARRIVED
01.10.2011 14:34:36.609:   AVSDK Message - ERROR: :Cannot open drive -> error code 14
01.10.2011 14:34:36.609:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
01.10.2011 14:34:36.609:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 203 - burn support - open device failed !!!
01.10.2011 14:34:36.703:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 14:34:38.828:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 14:34:38.843:   Open Project: Disc_2011-10-01 -- dvd project 2011-10-01
01.10.2011 14:34:38.843:   VideoMode: PAL   Temp Dir: E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\
01.10.2011 14:34:38.843:   dll version 8.0.5.3
01.10.2011 14:34:38.843:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
01.10.2011 14:34:38.843:   EstimateLayerSplitPoint()...
01.10.2011 14:34:38.843:   Splitpunkt 4271833088 auf Disk mit Größe 130711552
01.10.2011 14:34:38.843:   Title an Stelle 0, Länge 131072, Typ 0
01.10.2011 14:34:38.843:   Title an Stelle 131072, Länge 327680, Typ 0
01.10.2011 14:34:38.843:   Title an Stelle 458752, Länge 130252800, Typ 1
01.10.2011 14:34:38.843:   ... Split möglich nach aktuellem Title, -> Abbruch
01.10.2011 14:34:38.843:   Step 1 of 6, Encodiere Film 1 ...
01.10.2011 14:37:19.656:   Step 1 done
01.10.2011 14:37:19.656:   Step 2 of 6, Encodiere Filmmenü ...
01.10.2011 14:37:20.015:   Step 2 done
01.10.2011 14:37:20.015:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
01.10.2011 14:37:21.359:   Step 3 done
01.10.2011 14:37:21.359:   ConvertMovie() - encoded file: E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01\VTS_01_1.VOB
01.10.2011 14:37:21.359:   Step 4 of 6, Erzeuge Disc-Image ...
01.10.2011 14:37:22.328:   Step 4 done
01.10.2011 14:37:22.484:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 14:37:32.140:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 14:37:34.234:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 14:37:34.250:   Step 5 of 6
01.10.2011 14:37:34.250:   Step 5 done
01.10.2011 14:37:34.250:   ------------ InitializeBurningProcess Point ----------------
01.10.2011 14:37:34.296:   setting PoINT cache size to 16777216l
01.10.2011 14:37:34.328:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
01.10.2011 14:37:34.328:    Booktype: don't care
01.10.2011 14:37:34.328:   setting write speed to 1411000  bytes/sec
01.10.2011 14:37:34.328:   this equals 1,018773x DVD / 7,998867x CD Speed
01.10.2011 14:37:34.328:   ------------ done: succeeded ----------------
01.10.2011 14:37:34.328:   ------------ CreateAPIProject ----------------
01.10.2011 14:37:34.328:   Step 6 of 6
01.10.2011 14:37:34.328:   creating DVD project in prepfile mode...
01.10.2011 14:37:34.343:   create volume... OK
01.10.2011 14:37:34.343:   verify option OFF
01.10.2011 14:37:34.343:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01\VIDEO_TS.IFO"
01.10.2011 14:37:34.343:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01\VIDEO_TS.VOB"
01.10.2011 14:37:34.343:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01\VTS_01_1.VOB"
01.10.2011 14:37:34.343:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01\VTS_01_0.IFO"
01.10.2011 14:37:34.343:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01\VTS_01_0.VOB"
01.10.2011 14:37:34.343:   Step 6 done
01.10.2011 14:37:34.343:   ------------ done ----------------
01.10.2011 14:37:34.343:   ------------ BurnToDisc ----------------
01.10.2011 14:37:34.343:   time:
01.10.2011 14:37:34.359:   Step 6 of 6
01.10.2011 14:37:34.375:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
01.10.2011 14:37:34.375:    Booktype: don't care
01.10.2011 14:37:34.375:   setting write speed to 1411000  bytes/sec
01.10.2011 14:37:34.375:   this equals 1,018773x DVD / 7,998867x CD Speed
01.10.2011 14:37:34.375:   Check on previously direct recorded session...OK
01.10.2011 14:37:34.375:   AVSDK Message - INFO: :Recording volume ...
01.10.2011 14:37:34.375:   AVSDK Status - Begin operation Recording 59665 sectors/frames
01.10.2011 14:37:34.375:   time:
01.10.2011 14:37:34.375:   AVSDK Message - INFO: :Recording -> writing data ...
01.10.2011 14:37:34.546:   wrote LeadIn, start DataCopy
01.10.2011 14:37:34.546:   time:
01.10.2011 14:37:42.593:   AVSDK Message - ERROR: :Cannot write to disc -> End of user area encountered on this track (ASC/ASCQ 63/00)
01.10.2011 14:38:18.718:   AVSDK Status - End operation Recording 59665 sectors/frames
01.10.2011 14:38:18.718:   AVSDK Message - INFO: :Recording failed due to write error on disc
01.10.2011 14:38:18.718:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
01.10.2011 14:38:18.718:   Step 6 done
01.10.2011 14:38:18.718:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 251 - write error occurred on disc !!!
01.10.2011 14:38:18.718:   ------------ done ----------------
01.10.2011 14:38:18.718:   time:
01.10.2011 14:38:18.718:   project burning failed
01.10.2011 14:38:18.734:   !!! DBK error in CBurnDevSupport::BurnProject(): 251 - write error occurred on disc !!!
01.10.2011 14:38:18.734:   !!! DBK error in BurnProject: 251 - write error occurred on disc !!!
01.10.2011 14:40:25.781:   Open Project: Disc_2011-10-01 -- wmv hd project 2011-10-01
01.10.2011 14:40:25.781:   VideoMode: PAL   Temp Dir: E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\
01.10.2011 14:40:25.781:   dll version 8.0.5.3
01.10.2011 14:40:26.671:   Step 1 of 6, Encodiere Film 1 ...
01.10.2011 14:41:54.843:   Step 1 done
01.10.2011 14:41:54.843:   ERROR: PrepareDVDVideoFiles() failed with errNo 11 - user cancelled
01.10.2011 14:41:54.843:   !!! DBK error in BurnProject: 2 - user cancelled operation !!!

-------------------------- 01.10.2011 14:51:01 --------------------------

01.10.2011 14:51:01.234:   DLLAV32.DLL loaded, all entry points available
01.10.2011 14:51:01.234:   AVSDK MsgCbFunc registered
01.10.2011 14:51:01.234:   AVSDK: StatCbFunc registered
01.10.2011 14:51:01.234:   AVSDK Message - WARNING: :Unable to get SCSI INQUIRY data of '\\.\Scsi0:'. Some devices may not be available.
01.10.2011 14:51:09.921:   AVSDK Version 6.2.168
01.10.2011 14:51:09.921:   ------------ Reading Device Info ----------------
01.10.2011 14:51:09.921:   AVSDK: 2 device(s) found
01.10.2011 14:51:09.921:   Adapter=1  ID=3  LUN=0   G:BENQ DVD DD DW1620 Revision:B7W9
01.10.2011 14:51:09.921:   AVSDK: 1 record device(s) available
01.10.2011 14:51:09.921:   ------------ done ----------------
01.10.2011 14:51:39.656:   setting no speed limit
01.10.2011 14:51:39.656:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
01.10.2011 14:51:39.828:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 14:51:39.843:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
01.10.2011 14:53:59.984:   setting no speed limit
01.10.2011 14:54:00.062:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 14:54:04.937:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 14:54:07.046:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 14:54:07.062:   Open Project: Disc_2011-10-01_-_02 -- dvd project 2011-10-01
01.10.2011 14:54:07.062:   VideoMode: PAL   Temp Dir: E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\
01.10.2011 14:54:07.062:   dll version 8.0.5.3
01.10.2011 14:54:07.062:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
01.10.2011 14:54:07.062:   EstimateLayerSplitPoint()...
01.10.2011 14:54:07.062:   Splitpunkt 4271833088 auf Disk mit Größe 160759808
01.10.2011 14:54:07.062:   Title an Stelle 0, Länge 131072, Typ 0
01.10.2011 14:54:07.062:   Title an Stelle 131072, Länge 131072, Typ 0
01.10.2011 14:54:07.062:   Title an Stelle 262144, Länge 160497664, Typ 1
01.10.2011 14:54:07.062:   ... Split möglich nach aktuellem Title, -> Abbruch
01.10.2011 14:54:07.062:   Step 1 of 6, Encodiere Film 1 ...
01.10.2011 14:55:31.343:   Step 1 done
01.10.2011 14:55:31.343:   Step 2 of 6, Encodiere Filmmenü ...
01.10.2011 14:55:31.765:   Step 2 done
01.10.2011 14:55:31.765:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
01.10.2011 14:55:33.421:   Step 3 done
01.10.2011 14:55:33.421:   ConvertMovie() - encoded file: E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_02\VTS_01_1.VOB
01.10.2011 14:55:33.421:   Step 4 of 6, Erzeuge Disc-Image ...
01.10.2011 14:55:33.843:   Step 4 done
01.10.2011 14:55:34.000:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 14:55:44.406:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 14:55:46.515:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 14:55:46.515:   Step 5 of 6
01.10.2011 14:55:46.515:   Step 5 done
01.10.2011 14:55:46.531:   ------------ InitializeBurningProcess Point ----------------
01.10.2011 14:55:46.593:   setting PoINT cache size to 16777216l
01.10.2011 14:55:46.593:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
01.10.2011 14:55:46.593:    Booktype: don't care
01.10.2011 14:55:46.593:   setting write speed to 2822000  bytes/sec
01.10.2011 14:55:46.593:   this equals 2,037545x DVD / 15,997733x CD Speed
01.10.2011 14:55:46.593:   ------------ done: succeeded ----------------
01.10.2011 14:55:46.593:   ------------ CreateAPIProject ----------------
01.10.2011 14:55:46.593:   Step 6 of 6
01.10.2011 14:55:46.593:   creating DVD project in prepfile mode...
01.10.2011 14:55:46.593:   create volume... OK
01.10.2011 14:55:46.593:   verify option OFF
01.10.2011 14:55:46.593:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_02\VIDEO_TS.IFO"
01.10.2011 14:55:46.593:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_02\VIDEO_TS.VOB"
01.10.2011 14:55:46.609:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_02\VTS_01_1.VOB"
01.10.2011 14:55:46.609:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_02\VTS_01_0.IFO"
01.10.2011 14:55:46.609:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_02\VTS_01_0.VOB"
01.10.2011 14:55:46.609:   Step 6 done
01.10.2011 14:55:46.609:   ------------ done ----------------
01.10.2011 14:55:46.609:   ------------ BurnToDisc ----------------
01.10.2011 14:55:46.609:   time:
01.10.2011 14:55:46.609:   Step 6 of 6
01.10.2011 14:55:46.609:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
01.10.2011 14:55:46.609:    Booktype: don't care
01.10.2011 14:55:46.609:   setting write speed to 2822000  bytes/sec
01.10.2011 14:55:46.609:   this equals 2,037545x DVD / 15,997733x CD Speed
01.10.2011 14:55:46.609:   Check on previously direct recorded session...OK
01.10.2011 14:55:46.625:   AVSDK Message - INFO: :Recording volume ...
01.10.2011 14:55:46.625:   AVSDK Status - Begin operation Recording 24807 sectors/frames
01.10.2011 14:55:46.625:   time:
01.10.2011 14:55:46.625:   AVSDK Message - INFO: :Recording -> writing data ...
01.10.2011 14:55:46.906:   wrote LeadIn, start DataCopy
01.10.2011 14:55:46.906:   time:
01.10.2011 14:55:55.968:   AVSDK Message - ERROR: :Cannot write to disc -> End of user area encountered on this track (ASC/ASCQ 63/00)
01.10.2011 14:56:18.546:   AVSDK Status - End operation Recording 24807 sectors/frames
01.10.2011 14:56:18.546:   AVSDK Message - INFO: :Recording failed due to write error on disc
01.10.2011 14:56:18.546:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
01.10.2011 14:56:18.546:   Step 6 done
01.10.2011 14:56:18.546:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 251 - write error occurred on disc !!!
01.10.2011 14:56:18.546:   ------------ done ----------------
01.10.2011 14:56:18.546:   time:
01.10.2011 14:56:18.546:   project burning failed
01.10.2011 14:56:18.546:   !!! DBK error in CBurnDevSupport::BurnProject(): 251 - write error occurred on disc !!!
01.10.2011 14:56:18.546:   !!! DBK error in BurnProject: 251 - write error occurred on disc !!!
01.10.2011 14:57:30.296:   setting no speed limit
01.10.2011 14:57:35.984:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive g:
01.10.2011 14:57:35.984:    DEVICE ARRIVED
01.10.2011 14:57:35.984:   AVSDK Message - ERROR: :Cannot open drive -> error code 14
01.10.2011 14:57:35.984:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
01.10.2011 14:57:35.984:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 203 - burn support - open device failed !!!
01.10.2011 14:57:36.562:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 14:57:36.593:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
01.10.2011 14:57:44.281:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 14:57:44.281:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
01.10.2011 14:58:53.625:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive g:
01.10.2011 14:58:53.625:    DEVICE ARRIVED
01.10.2011 14:59:05.265:   setting no speed limit
01.10.2011 14:59:11.093:   Open Project: Disc_2011-10-01_-_02 -- dvd project 2011-10-01
01.10.2011 14:59:11.093:   VideoMode: PAL   Temp Dir: E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\
01.10.2011 14:59:11.093:   dll version 8.0.5.3
01.10.2011 14:59:11.093:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
01.10.2011 14:59:11.093:   EstimateLayerSplitPoint()...
01.10.2011 14:59:11.093:   Splitpunkt 4271833088 auf Disk mit Größe 160759808
01.10.2011 14:59:11.093:   Title an Stelle 0, Länge 131072, Typ 0
01.10.2011 14:59:11.093:   Title an Stelle 131072, Länge 131072, Typ 0
01.10.2011 14:59:11.093:   Title an Stelle 262144, Länge 160497664, Typ 1
01.10.2011 14:59:11.093:   ... Split möglich nach aktuellem Title, -> Abbruch
01.10.2011 14:59:13.812:   Step 1 of 6, Encodiere Film 1 ...
01.10.2011 15:00:37.109:   Step 1 done
01.10.2011 15:00:37.109:   Step 2 of 6, Encodiere Filmmenü ...
01.10.2011 15:00:37.515:   Step 2 done
01.10.2011 15:00:37.515:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
01.10.2011 15:00:37.953:   Step 3 done
01.10.2011 15:00:37.953:   ConvertMovie() - encoded file: E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_02\VTS_01_1.VOB
01.10.2011 15:00:37.953:   Step 4 of 6, Erzeuge Disc-Image ...
01.10.2011 15:00:38.375:   Step 4 done
01.10.2011 15:00:40.718:   Step 5 of 6
01.10.2011 15:00:40.718:   Step 5 done
01.10.2011 15:00:40.718:   ------------ InitializeBurningProcess Point ----------------
01.10.2011 15:00:40.781:   setting PoINT cache size to 16777216l
01.10.2011 15:00:40.781:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
01.10.2011 15:00:40.781:    Booktype: don't care
01.10.2011 15:00:40.781:   setting write speed to 3324000  bytes/sec
01.10.2011 15:00:40.781:   this equals 2,400000x DVD / 18,843538x CD Speed
01.10.2011 15:00:40.781:   ------------ done: succeeded ----------------
01.10.2011 15:00:40.781:   ------------ CreateAPIProject ----------------
01.10.2011 15:00:40.781:   Step 6 of 6
01.10.2011 15:00:40.781:   creating DVD project in prepfile mode...
01.10.2011 15:00:40.781:   create volume... OK
01.10.2011 15:00:40.781:   verify option OFF
01.10.2011 15:00:40.781:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_02\VIDEO_TS.IFO"
01.10.2011 15:00:40.796:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_02\VIDEO_TS.VOB"
01.10.2011 15:00:40.796:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_02\VTS_01_1.VOB"
01.10.2011 15:00:40.796:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_02\VTS_01_0.IFO"
01.10.2011 15:00:40.796:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_02\VTS_01_0.VOB"
01.10.2011 15:00:40.796:   Step 6 done
01.10.2011 15:00:40.796:   ------------ done ----------------
01.10.2011 15:00:40.796:   ------------ BurnToDisc ----------------
01.10.2011 15:00:40.796:   time:
01.10.2011 15:00:40.796:   Step 6 of 6
01.10.2011 15:00:40.796:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
01.10.2011 15:00:40.796:    Booktype: don't care
01.10.2011 15:00:40.796:   setting write speed to 3324000  bytes/sec
01.10.2011 15:00:40.796:   this equals 2,400000x DVD / 18,843538x CD Speed
01.10.2011 15:00:40.796:   Check on previously direct recorded session...OK
01.10.2011 15:00:40.812:   AVSDK Message - INFO: :Recording volume ...
01.10.2011 15:00:40.812:   AVSDK Status - Begin operation Recording 24864 sectors/frames
01.10.2011 15:00:40.812:   time:
01.10.2011 15:00:40.812:   AVSDK Message - INFO: :Recording -> writing data ...
01.10.2011 15:00:41.750:   wrote LeadIn, start DataCopy
01.10.2011 15:00:41.750:   time:
01.10.2011 15:01:04.343:   writing leadout and closing disc
01.10.2011 15:01:04.343:   time:
01.10.2011 15:04:02.031:   writing leadout and closing disc
01.10.2011 15:04:02.031:   time:
01.10.2011 15:04:02.031:   AVSDK Status - End operation Recording 24864 sectors/frames
01.10.2011 15:04:02.031:   AVSDK Message - INFO: :Recording successfully completed
01.10.2011 15:04:03.171:   Step 6 done
01.10.2011 15:04:03.171:   ------------ done ----------------
01.10.2011 15:04:03.171:   time:

-------------------------- 01.10.2011 15:16:25 --------------------------

01.10.2011 15:16:25.921:   DLLAV32.DLL loaded, all entry points available
01.10.2011 15:16:25.921:   AVSDK MsgCbFunc registered
01.10.2011 15:16:25.921:   AVSDK: StatCbFunc registered
01.10.2011 15:16:25.921:   AVSDK Message - WARNING: :Unable to get SCSI INQUIRY data of '\\.\Scsi0:'. Some devices may not be available.
01.10.2011 15:16:27.062:   AVSDK Version 6.2.168
01.10.2011 15:16:27.062:   ------------ Reading Device Info ----------------
01.10.2011 15:16:27.062:   AVSDK: 2 device(s) found
01.10.2011 15:16:27.062:   Adapter=1  ID=3  LUN=0   G:BENQ DVD DD DW1620 Revision:B7W9
01.10.2011 15:16:27.062:   AVSDK: 1 record device(s) available
01.10.2011 15:16:27.062:   ------------ done ----------------
01.10.2011 15:16:30.062:   setting no speed limit
01.10.2011 15:16:30.062:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
01.10.2011 15:16:30.312:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
01.10.2011 15:16:32.203:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
01.10.2011 15:17:08.906:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive g:
01.10.2011 15:17:08.906:    DEVICE ARRIVED
01.10.2011 15:17:08.937:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
01.10.2011 15:17:08.937:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
01.10.2011 15:17:08.953:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
01.10.2011 15:17:29.156:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive g:
01.10.2011 15:17:29.156:    DEVICE ARRIVED
01.10.2011 15:17:29.156:   AVSDK Message - ERROR: :Cannot open drive -> error code 14
01.10.2011 15:17:29.156:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
01.10.2011 15:17:29.156:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 203 - burn support - open device failed !!!
01.10.2011 15:17:29.484:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 15:17:29.484:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
01.10.2011 15:17:55.140:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive g:
01.10.2011 15:17:55.140:    DEVICE ARRIVED
01.10.2011 15:17:55.140:   AVSDK Message - ERROR: :Cannot open drive -> error code 14
01.10.2011 15:17:55.140:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
01.10.2011 15:17:55.140:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 203 - burn support - open device failed !!!
01.10.2011 15:17:59.718:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 15:17:59.718:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
01.10.2011 15:18:31.359:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
01.10.2011 15:18:31.359:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
01.10.2011 15:18:31.359:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
01.10.2011 15:18:33.437:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
01.10.2011 15:18:33.437:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
01.10.2011 15:18:33.437:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
01.10.2011 15:18:33.453:   Open Project: Disc_2011-10-01_-_03 -- dvd project 2011-10-01
01.10.2011 15:18:33.453:   VideoMode: PAL   Temp Dir: E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\
01.10.2011 15:18:33.453:   dll version 8.0.5.3
01.10.2011 15:18:33.453:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
01.10.2011 15:18:33.453:   EstimateLayerSplitPoint()...
01.10.2011 15:18:33.453:   Splitpunkt 4271833088 auf Disk mit Größe 35553280
01.10.2011 15:18:33.453:   Title an Stelle 0, Länge 131072, Typ 0
01.10.2011 15:18:33.453:   Title an Stelle 131072, Länge 131072, Typ 0
01.10.2011 15:18:33.453:   Title an Stelle 262144, Länge 35291136, Typ 1
01.10.2011 15:18:33.453:   ... Split möglich nach aktuellem Title, -> Abbruch
01.10.2011 15:18:33.453:   Step 1 of 6, Encodiere Film 1 ...
01.10.2011 15:19:02.625:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive g:
01.10.2011 15:19:02.640:    DEVICE ARRIVED
01.10.2011 15:19:03.156:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 15:19:06.890:   Step 1 done
01.10.2011 15:19:06.890:   Step 2 of 6, Encodiere Filmmenü ...
01.10.2011 15:19:07.296:   Step 2 done
01.10.2011 15:19:07.296:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
01.10.2011 15:19:08.968:   Step 3 done
01.10.2011 15:19:08.968:   ConvertMovie() - encoded file: E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_03\VTS_01_1.VOB
01.10.2011 15:19:08.968:   Step 4 of 6, Erzeuge Disc-Image ...
01.10.2011 15:19:09.281:   Step 4 done
01.10.2011 15:19:09.421:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 15:19:14.828:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 15:19:16.921:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 15:19:16.921:   Step 5 of 6
01.10.2011 15:19:16.921:   Step 5 done
01.10.2011 15:19:16.921:   ------------ InitializeBurningProcess Point ----------------
01.10.2011 15:19:17.000:   setting PoINT cache size to 16777216l
01.10.2011 15:19:17.000:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
01.10.2011 15:19:17.000:    Booktype: don't care
01.10.2011 15:19:17.000:   setting write speed to 2822000  bytes/sec
01.10.2011 15:19:17.000:   this equals 2,037545x DVD / 15,997733x CD Speed
01.10.2011 15:19:17.000:   ------------ done: succeeded ----------------
01.10.2011 15:19:17.000:   ------------ CreateAPIProject ----------------
01.10.2011 15:19:17.000:   Step 6 of 6
01.10.2011 15:19:17.000:   creating DVD project in prepfile mode...
01.10.2011 15:19:17.000:   create volume... OK
01.10.2011 15:19:17.000:   verify option OFF
01.10.2011 15:19:17.000:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_03\VIDEO_TS.IFO"
01.10.2011 15:19:17.000:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_03\VIDEO_TS.VOB"
01.10.2011 15:19:17.015:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_03\VTS_01_1.VOB"
01.10.2011 15:19:17.015:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_03\VTS_01_0.IFO"
01.10.2011 15:19:17.015:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_03\VTS_01_0.VOB"
01.10.2011 15:19:17.015:   Step 6 done
01.10.2011 15:19:17.015:   ------------ done ----------------
01.10.2011 15:19:17.015:   ------------ BurnToDisc ----------------
01.10.2011 15:19:17.015:   time:
01.10.2011 15:19:17.015:   Step 6 of 6
01.10.2011 15:19:17.015:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
01.10.2011 15:19:17.015:    Booktype: don't care
01.10.2011 15:19:17.015:   setting write speed to 2822000  bytes/sec
01.10.2011 15:19:17.015:   this equals 2,037545x DVD / 15,997733x CD Speed
01.10.2011 15:19:17.015:   Check on previously direct recorded session...OK
01.10.2011 15:19:17.031:   AVSDK Message - INFO: :Recording volume ...
01.10.2011 15:19:17.031:   AVSDK Status - Begin operation Recording 14964 sectors/frames
01.10.2011 15:19:17.031:   time:
01.10.2011 15:19:17.031:   AVSDK Message - INFO: :Recording -> writing data ...
01.10.2011 15:19:17.140:   wrote LeadIn, start DataCopy
01.10.2011 15:19:17.140:   time:
01.10.2011 15:19:28.812:   AVSDK Message - ERROR: :Cannot write to disc -> End of user area encountered on this track (ASC/ASCQ 63/00)
01.10.2011 15:19:50.359:   AVSDK Status - End operation Recording 14964 sectors/frames
01.10.2011 15:19:50.359:   AVSDK Message - INFO: :Recording failed due to write error on disc
01.10.2011 15:19:50.359:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
01.10.2011 15:19:50.359:   Step 6 done
01.10.2011 15:19:50.359:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 251 - write error occurred on disc !!!
01.10.2011 15:19:50.359:   ------------ done ----------------
01.10.2011 15:19:50.359:   time:
01.10.2011 15:19:50.359:   project burning failed
01.10.2011 15:19:50.359:   !!! DBK error in CBurnDevSupport::BurnProject(): 251 - write error occurred on disc !!!
01.10.2011 15:19:50.359:   !!! DBK error in BurnProject: 251 - write error occurred on disc !!!

-------------------------- 01.10.2011 17:50:57 --------------------------

01.10.2011 17:50:57.515:   DLLAV32.DLL loaded, all entry points available
01.10.2011 17:50:57.515:   AVSDK MsgCbFunc registered
01.10.2011 17:50:57.515:   AVSDK: StatCbFunc registered
01.10.2011 17:50:57.515:   AVSDK Message - WARNING: :Unable to get SCSI INQUIRY data of '\\.\Scsi0:'. Some devices may not be available.
01.10.2011 17:50:57.625:   AVSDK Version 6.2.168
01.10.2011 17:50:57.625:   ------------ Reading Device Info ----------------
01.10.2011 17:50:57.625:   AVSDK: 2 device(s) found
01.10.2011 17:50:57.625:   Adapter=1  ID=3  LUN=0   G:BENQ DVD DD DW1620 Revision:B7W9
01.10.2011 17:50:57.625:   AVSDK: 1 record device(s) available
01.10.2011 17:50:57.625:   ------------ done ----------------
01.10.2011 17:51:02.281:   setting no speed limit
01.10.2011 17:51:02.281:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
01.10.2011 17:51:02.312:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
01.10.2011 17:51:02.312:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
01.10.2011 17:51:02.312:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
01.10.2011 17:51:04.625:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
01.10.2011 17:51:04.625:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
01.10.2011 17:51:04.625:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
01.10.2011 17:51:06.718:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
01.10.2011 17:51:06.718:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
01.10.2011 17:51:06.718:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
01.10.2011 17:51:06.734:   Open Project: Disc_2011-10-01_-_04 -- dvd project 2011-10-01
01.10.2011 17:51:06.734:   VideoMode: PAL   Temp Dir: E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\
01.10.2011 17:51:06.734:   dll version 8.0.5.3
01.10.2011 17:51:06.734:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
01.10.2011 17:51:06.734:   EstimateLayerSplitPoint()...
01.10.2011 17:51:06.734:   Splitpunkt 4271833088 auf Disk mit Größe 53215232
01.10.2011 17:51:06.734:   Title an Stelle 0, Länge 131072, Typ 0
01.10.2011 17:51:06.734:   Title an Stelle 131072, Länge 131072, Typ 0
01.10.2011 17:51:06.734:   Title an Stelle 262144, Länge 52953088, Typ 1
01.10.2011 17:51:06.734:   ... Split möglich nach aktuellem Title, -> Abbruch
01.10.2011 17:51:06.734:   Step 1 of 6, Encodiere Film 1 ...
01.10.2011 17:51:37.656:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive g:
01.10.2011 17:51:37.656:    DEVICE ARRIVED
01.10.2011 17:51:38.296:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 17:51:54.984:   Step 1 done
01.10.2011 17:51:54.984:   Step 2 of 6, Encodiere Filmmenü ...
01.10.2011 17:51:55.406:   Step 2 done
01.10.2011 17:51:55.406:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
01.10.2011 17:51:57.078:   Step 3 done
01.10.2011 17:51:57.078:   ConvertMovie() - encoded file: E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_04\VTS_01_1.VOB
01.10.2011 17:51:57.078:   Step 4 of 6, Erzeuge Disc-Image ...
01.10.2011 17:51:57.531:   Step 4 done
01.10.2011 17:51:57.671:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 17:52:15.734:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 17:52:17.812:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 17:52:17.812:   Step 5 of 6
01.10.2011 17:52:17.812:   Step 5 done
01.10.2011 17:52:17.828:   ------------ InitializeBurningProcess Point ----------------
01.10.2011 17:52:17.875:   setting PoINT cache size to 16777216l
01.10.2011 17:52:17.890:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
01.10.2011 17:52:17.890:    Booktype: don't care
01.10.2011 17:52:17.906:   setting write speed to 2822000  bytes/sec
01.10.2011 17:52:17.906:   this equals 2,037545x DVD / 15,997733x CD Speed
01.10.2011 17:52:17.906:   ------------ done: succeeded ----------------
01.10.2011 17:52:17.906:   ------------ CreateAPIProject ----------------
01.10.2011 17:52:17.906:   Step 6 of 6
01.10.2011 17:52:17.906:   creating DVD project in prepfile mode...
01.10.2011 17:52:17.906:   create volume... OK
01.10.2011 17:52:17.906:   verify option OFF
01.10.2011 17:52:17.906:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_04\VIDEO_TS.IFO"
01.10.2011 17:52:17.906:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_04\VIDEO_TS.VOB"
01.10.2011 17:52:17.906:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_04\VTS_01_1.VOB"
01.10.2011 17:52:17.906:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_04\VTS_01_0.IFO"
01.10.2011 17:52:17.906:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01_-_04\VTS_01_0.VOB"
01.10.2011 17:52:17.906:   Step 6 done
01.10.2011 17:52:17.906:   ------------ done ----------------
01.10.2011 17:52:17.906:   ------------ BurnToDisc ----------------
01.10.2011 17:52:17.906:   time:
01.10.2011 17:52:17.937:   Step 6 of 6
01.10.2011 17:52:17.937:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
01.10.2011 17:52:17.937:    Booktype: don't care
01.10.2011 17:52:17.937:   setting write speed to 2822000  bytes/sec
01.10.2011 17:52:17.937:   this equals 2,037545x DVD / 15,997733x CD Speed
01.10.2011 17:52:17.937:   Check on previously direct recorded session...OK
01.10.2011 17:52:17.953:   AVSDK Message - INFO: :Recording volume ...
01.10.2011 17:52:17.953:   AVSDK Status - Begin operation Recording 23494 sectors/frames
01.10.2011 17:52:17.953:   time:
01.10.2011 17:52:17.953:   AVSDK Message - INFO: :Recording -> writing data ...
01.10.2011 17:52:18.078:   wrote LeadIn, start DataCopy
01.10.2011 17:52:18.078:   time:
01.10.2011 17:52:26.640:   AVSDK Message - ERROR: :Cannot write to disc -> End of user area encountered on this track (ASC/ASCQ 63/00)
01.10.2011 17:52:48.843:   AVSDK Status - End operation Recording 23494 sectors/frames
01.10.2011 17:52:48.843:   AVSDK Message - INFO: :Recording failed due to write error on disc
01.10.2011 17:52:48.843:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
01.10.2011 17:52:48.843:   Step 6 done
01.10.2011 17:52:48.843:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 251 - write error occurred on disc !!!
01.10.2011 17:52:48.843:   ------------ done ----------------
01.10.2011 17:52:48.843:   time:
01.10.2011 17:52:48.843:   project burning failed
01.10.2011 17:52:48.843:   !!! DBK error in CBurnDevSupport::BurnProject(): 251 - write error occurred on disc !!!
01.10.2011 17:52:48.859:   !!! DBK error in BurnProject: 251 - write error occurred on disc !!!

-------------------------- 01.10.2011 17:56:38 --------------------------

01.10.2011 17:56:38.359:   DLLAV32.DLL loaded, all entry points available
01.10.2011 17:56:38.359:   AVSDK MsgCbFunc registered
01.10.2011 17:56:38.359:   AVSDK: StatCbFunc registered
01.10.2011 17:56:38.359:   AVSDK Message - WARNING: :Unable to get SCSI INQUIRY data of '\\.\Scsi0:'. Some devices may not be available.
01.10.2011 17:56:38.468:   AVSDK Version 6.2.168
01.10.2011 17:56:38.468:   ------------ Reading Device Info ----------------
01.10.2011 17:56:38.468:   AVSDK: 2 device(s) found
01.10.2011 17:56:38.468:   Adapter=1  ID=3  LUN=0   G:BENQ DVD DD DW1620 Revision:B7W9
01.10.2011 17:56:38.468:   AVSDK: 1 record device(s) available
01.10.2011 17:56:38.468:   ------------ done ----------------
01.10.2011 17:56:57.562:   setting no speed limit
01.10.2011 17:56:57.562:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
01.10.2011 17:56:57.750:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 17:56:57.765:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
01.10.2011 17:57:00.078:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 17:57:00.078:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
01.10.2011 17:57:21.718:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive g:
01.10.2011 17:57:21.718:    DEVICE ARRIVED
01.10.2011 17:57:21.781:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
01.10.2011 17:57:21.781:   !!! AVSDK error: OpenCloseTray() calling AvDevControl(): 5 - request not allowed !!!
01.10.2011 17:57:21.796:   AVSDK Message - ERROR: :Cannot open drive -> error code 14
01.10.2011 17:57:21.796:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
01.10.2011 17:57:21.796:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 203 - burn support - open device failed !!!
01.10.2011 17:57:21.812:   Open Project: Disc_2011-10-01 -- dvd project 2011-10-01
01.10.2011 17:57:21.812:   VideoMode: PAL   Temp Dir: E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\
01.10.2011 17:57:21.828:   dll version 8.0.5.3
01.10.2011 17:57:21.828:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
01.10.2011 17:57:21.828:   EstimateLayerSplitPoint()...
01.10.2011 17:57:21.828:   Splitpunkt 4271833088 auf Disk mit Größe 53215232
01.10.2011 17:57:21.843:   Title an Stelle 0, Länge 131072, Typ 0
01.10.2011 17:57:21.843:   Title an Stelle 131072, Länge 131072, Typ 0
01.10.2011 17:57:21.843:   Title an Stelle 262144, Länge 52953088, Typ 1
01.10.2011 17:57:21.843:   ... Split möglich nach aktuellem Title, -> Abbruch
01.10.2011 17:57:21.875:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 17:57:24.500:   Step 1 of 6, Encodiere Film 1 ...
01.10.2011 17:58:04.078:   Step 1 done
01.10.2011 17:58:04.078:   Step 2 of 6, Encodiere Filmmenü ...
01.10.2011 17:58:04.468:   Step 2 done
01.10.2011 17:58:04.468:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
01.10.2011 17:58:06.156:   Step 3 done
01.10.2011 17:58:06.156:   ConvertMovie() - encoded file: E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01\VTS_01_1.VOB
01.10.2011 17:58:06.156:   Step 4 of 6, Erzeuge Disc-Image ...
01.10.2011 17:58:06.578:   Step 4 done
01.10.2011 17:58:06.734:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 17:58:18.468:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 17:58:20.546:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
01.10.2011 17:58:20.562:   Step 5 of 6
01.10.2011 17:58:20.562:   Step 5 done
01.10.2011 17:58:20.562:   ------------ InitializeBurningProcess Point ----------------
01.10.2011 17:58:20.609:   setting PoINT cache size to 16777216l
01.10.2011 17:58:20.625:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
01.10.2011 17:58:20.625:    Booktype: don't care
01.10.2011 17:58:20.625:   setting write speed to 2822000  bytes/sec
01.10.2011 17:58:20.625:   this equals 2,037545x DVD / 15,997733x CD Speed
01.10.2011 17:58:20.625:   ------------ done: succeeded ----------------
01.10.2011 17:58:20.625:   ------------ CreateAPIProject ----------------
01.10.2011 17:58:20.625:   Step 6 of 6
01.10.2011 17:58:20.625:   creating DVD project in prepfile mode...
01.10.2011 17:58:20.625:   create volume... OK
01.10.2011 17:58:20.625:   verify option OFF
01.10.2011 17:58:20.625:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01\VIDEO_TS.IFO"
01.10.2011 17:58:20.625:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01\VIDEO_TS.VOB"
01.10.2011 17:58:20.625:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01\VTS_01_1.VOB"
01.10.2011 17:58:20.625:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01\VTS_01_0.IFO"
01.10.2011 17:58:20.625:   adding file "E:\Dokumente\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Disc_2011-10-01\VTS_01_0.VOB"
01.10.2011 17:58:20.640:   Step 6 done
01.10.2011 17:58:20.640:   ------------ done ----------------
01.10.2011 17:58:20.640:   ------------ BurnToDisc ----------------
01.10.2011 17:58:20.640:   time:
01.10.2011 17:58:20.640:   Step 6 of 6
01.10.2011 17:58:20.640:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
01.10.2011 17:58:20.640:    Booktype: don't care
01.10.2011 17:58:20.640:   setting write speed to 2822000  bytes/sec
01.10.2011 17:58:20.640:   this equals 2,037545x DVD / 15,997733x CD Speed
01.10.2011 17:58:20.640:   Check on previously direct recorded session...OK
01.10.2011 17:58:20.656:   AVSDK Message - INFO: :Recording volume ...
01.10.2011 17:58:20.656:   AVSDK Status - Begin operation Recording 23494 sectors/frames
01.10.2011 17:58:20.656:   time:
01.10.2011 17:58:20.656:   AVSDK Message - INFO: :Recording -> writing data ...
01.10.2011 17:58:20.812:   wrote LeadIn, start DataCopy
01.10.2011 17:58:20.812:   time:
01.10.2011 17:58:35.921:   AVSDK Message - ERROR: :Cannot write to disc -> End of user area encountered on this track (ASC/ASCQ 63/00)
01.10.2011 17:58:59.250:   AVSDK Status - End operation Recording 23494 sectors/frames
01.10.2011 17:58:59.250:   AVSDK Message - INFO: :Recording failed due to write error on disc
01.10.2011 17:58:59.250:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
01.10.2011 17:58:59.250:   Step 6 done
01.10.2011 17:58:59.265:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 251 - write error occurred on disc !!!
01.10.2011 17:58:59.265:   ------------ done ----------------
01.10.2011 17:58:59.265:   time:
01.10.2011 17:58:59.265:   project burning failed
01.10.2011 17:58:59.265:   !!! DBK error in CBurnDevSupport::BurnProject(): 251 - write error occurred on disc !!!
01.10.2011 17:58:59.265:   !!! DBK error in BurnProject: 251 - write error occurred on disc !!!

-------------------------- 01.10.2011 18:13:54 --------------------------

01.10.2011 18:13:54.718:   DLLAV32.DLL loaded, all entry points available
01.10.2011 18:13:54.718:   AVSDK MsgCbFunc registered
01.10.2011 18:13:54.718:   AVSDK: StatCbFunc registered
01.10.2011 18:13:54.718:   AVSDK Message - WARNING: :Unable to get SCSI INQUIRY data of '\\.\Scsi0:'. Some devices may not be available.
01.10.2011 18:13:54.828:   AVSDK Version 6.2.168
01.10.2011 18:13:54.828:   ------------ Reading Device Info ----------------
01.10.2011 18:13:54.828:   AVSDK: 2 device(s) found
01.10.2011 18:13:54.828:   Adapter=1  ID=3  LUN=0   G:BENQ DVD DD DW1620 Revision:B7W9
01.10.2011 18:13:54.843:   AVSDK: 1 record device(s) available
01.10.2011 18:13:54.843:   ------------ done ------

Kommentare

Impulsantwort schrieb am 05.10.2011 um 16:41 Uhr

Hallo !

Danke erstmal für den Hinweis. Was ich nicht verstehe, der DW1620 ist ein IDE-Brenner und ist auch am IDE-Port angeschlossen. Warum der dann als SCSI angezeigt wird, keine Ahnung.

Die Sache mit einem neuen Brenner habe ich natürlich auch schon im Forum gelesen, aber da ich nicht auf Verdacht einen neuen Brenner kaufen wollte, der dann evtl. auch nicht mit dem Magix-Programm zusammenarbeitet, habe ich mir das als letzte Option offen gehalten - wobei mich da dann wiederum wundert, warum nur und auschließlich Magix mit dem Brenner Probleme macht. Aber wenn's sonst nicht hilft, muss wohl mal ein neuer Brenner rein, 20 Euro sind ja kein großes Risiko ;)