why do the start and end get cut off, when I haven't set it to do this - audio cleaning lab premium

bugrit wrote on 10/24/2016, 2:00 PM

every so often, the beginning and the end are cut off.  I have never used these tools, I cannot see the point of them.  If I want to cut off a section of an object, I would do it myself.  How can I stop it happeing at all?  Audio Cleaning Lab Premium 2014.

What is the problem? - truncating my files
When and how does it occur? - it could be anytime, the last time I saw it was when I was using the DE-hisser
What type of hardware are you using? - windows 10 pro PC
Which operating system are you using? - windows 10 pro
What's the name of the software you are using and what's the version number? - AUDIO CLEANING LAB 2014 PREMIUM

Comments

bugrit wrote on 10/27/2016, 4:47 AM

administrator@magix.info

If you had read my message you would have realised what is happening.

 

It was AFTER using the DE-hisser

bugrit wrote on 10/31/2016, 5:12 AM

My NEW Answer.

if I had an asnswer I would know why it is happening, I haven't so I do not know why it is doing it.

brialin wrote on 5/24/2017, 7:19 PM

I have the SAME problem where the beginning and end are usually cut off without me telling it to do this. Please answer this.

bugrit wrote on 5/25/2017, 1:52 AM

This has been going on since "bugrit wrote on 10/24/2016, 8:00 PM", I still haven't had ANY kind of answer. They either don't know what is happening, Comment removed by Moderator.

johnebaker wrote on 5/25/2017, 2:44 AM

@ bugrit

This is a user forum not Magix support.

If you raised a support ticket about the initial problem then you should be responding directly to any replies you got and provide the information requested.

The 'conversation' here is one sided we cannot see what information you have been asked to provide or tests to run.

John EB

Forum Moderator

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 23H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

bugrit wrote on 5/25/2017, 2:56 AM

This has been going on since "bugrit wrote on 10/24/2016,😡 8:00 PM", I still haven't had ANY kind of answer. Are you really bothered about your customers, OR, do you say,  "sod-em", whatever it is, it is just NOT GOOD ENOUGH. BTW, have you ever tried contacting magix? IT IS NOT STRAIGHT FORWARD. As for information, I have NOT had ANY message(s) from magix, except that they where looking into my problem program.

emmrecs wrote on 5/25/2017, 3:57 AM

@bugrit

Did you actually raise a Support Ticket? If not, you need to do so NOW. Go to http://support.magix.com

If you did, you would have received a very prompt auto response, which included a very important case number. Use that case number to re-initiate your query.

As John said, we are all fellow-users, we are NOT Magix Support.

Jeff

Win 10 Pro 64 bit, Intel i7 Quad Core 6700K @ 4GHz, 32 GB RAM, NVidia GTX 1660TI and Intel HD530 Graphics, MOTU 8-Pre f/w audio interface, VPX, MEP, Music Maker, PhotoStory Deluxe, Photo Manager Deluxe, Xara 3D Maker 7, Samplitude Pro X7 Suite, Reaper, Adobe Audition 3, CS6 and CC, 2 x Canon HG10 cameras, 1 x Canon EOS 600D, Akaso EK7000 Pro Action Cam

bugrit wrote on 5/25/2017, 4:18 AM

Comment edited by Moderator to meaningful response.

All I need are answers, not rebukes from anybody, I always thought that A FORUM, was for people to help others, and not ask questions that have been asked before. One last question, What does this say?

"Thank you for your inquiry. - Thu 25/05/2017 08:17

A new support ticket was created. Please don't send multiple inquiries
regarding the same problem. If you want to add further information to
this ticket, please make sure to use the following subject line:

[Ticket#removed]

Your inquiry will soon be answered by one of our employees.
--
Magix Support System

MAGIX Software GmbH
Postfach 200914
01194 Dresden
Germany
http://www.magix.com

Managing Directors: Klaus Schmidt, Jörg Stüber
Commercial Register: Berlin Charlottenburg, HRB 127205"

 

johnebaker wrote on 5/25/2017, 5:20 AM

@ bugrit

. . . . I always thought that A FORUM, was for people to help others, and not ask questions that have been asked before . . .

It is, however in order for us to help you, then you must help us by supplying any information requested.

. . . . What does this say?

"Thank you for your inquiry. - Thu 25/05/2017 08:17 . . . .

That would indicate that you have file a support request this morning and will get a response in due course.

Please read sections 1 to 3 and 6 here before commenting again.

John EB

Forum moderator

 

 

 

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 23H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

bugrit wrote on 5/25/2017, 5:47 AM

If I had any, I would tell you, but If I am waiting as long as I have ALREADY done, You are talking about a minimum of three years and 8 (EIGHT months). With regards to your instruction to read sections 1 to 3 and 6. I was answering a remark made by Brialin, because he has the same problem that has happened in the last few months. If it had happened to you, I bet a £ to a p you would go right off the deepend. As, has happened to me with NO reply from Magix. Even if they are called on the phone all you get is the usual robot, that doesn't do what you want it to do. Namely, put me in contact with SOMEONE that actually know what they are talking about. I don't know why you edited out some of my comments, they are what I would say to anyone that asked me to pay for anything, and, the DO NOT PROVIDE the correct support. If you are a mode. why don't you report back to magix and tell them to get their fingers out. thankyou.

emmrecs wrote on 5/25/2017, 8:03 AM

@bugrit

I agree with you that this does appear to be a problem for more than one user (as evidenced by this thread) and I am very surprised if, as you say, you raised a support ticket three years and eight months ago that you received no reply, apparently not even an acknowledgement?

Clearly, having raised today a support ticket, you have received an acknowledgement and the all-important Ticket#. That seems very definite evidence to me that the support system works! You are given the clear information that you can follow-up by quoting the ticket# and also add any further information you wish to give.

I haven't personally had occasion to use Magix telephone support for a number of years; on the last occasion when I did, although I had to pay for the privilege because the product I was using was already more than 12 months old, the support given quickly resolved the problem. Any subsequent need for support I have always used the ticket system and the problems have been resolved, not necessarily always in a way that I would have wished or envisaged but always successfully.

John EB and I are part of the team of moderators; we give our time freely for this, we are not paid employees of Magix and we carry no additional "clout" with Magix than do ordinary members of this forum. Yes, we have contacts at Magix and may, at times and at our discretion, draw the attention of Magix staff to particular issues.

Part of our role as moderators is to ensure that the forums "run smoothly" and that nothing that is published is in any way defamatory or libellous and that no confidential information is publicly divulged. Your post which John edited contained some of the latter, hence his edit. You may not like it but he was carrying out the role Magix ask him to do.

Jeff
Forum Moderator

Win 10 Pro 64 bit, Intel i7 Quad Core 6700K @ 4GHz, 32 GB RAM, NVidia GTX 1660TI and Intel HD530 Graphics, MOTU 8-Pre f/w audio interface, VPX, MEP, Music Maker, PhotoStory Deluxe, Photo Manager Deluxe, Xara 3D Maker 7, Samplitude Pro X7 Suite, Reaper, Adobe Audition 3, CS6 and CC, 2 x Canon HG10 cameras, 1 x Canon EOS 600D, Akaso EK7000 Pro Action Cam

browj2 wrote on 5/25/2017, 11:52 AM

ACL2014 is now 3 years old. Magix gives you free support for one year after purchase, so you are beyond the service period. Note that others, like Corel, give you one month.

In order to help, one would have to be able to reproduce the problem with the same version. I don't have ACL2014, but I have uninstalled AML2014 and I am using the latest AML Premium with no intention of re-installing an old version. However, we can try to help. Remember, we can't see your screen and we don't know exactly what you did or what happened, so you have to fully describe everything, with screen shots.

  1. Did you upgrade to Windows 10 with ACL still installed and not re-install it?
  2. Do you have the latest patch? See under Help for Update online.
  3. What is the version number? See under Help, About.
  4. ACL is, for the most part, a non-destructive editor, so the underlying file is usually not touched. The Dehisser is a non-destructive effect. Look at the length of the file in the window. Click on cleaning and then hit the End key. Note the duration of the clip in the timer box. See my Image 1. My length is 05:23. Make a screen shot of this like I did and save it.
  5. Apply the Dehisser. Play it back. Look at the length. Any change? Beginning or ending? If so, take a screen shot and save it.
  6. Look at my Image 2. I faked a change in length at both beginning and end. Does this happen to you?
  7. Do you have Ripple objects turned on under Options. I turned it off, so that when I deleted the beginning, the piece that was left did not move to the left but a gap was created.
  8. Look at my Image 3. If you have a clip that has been shortened, click on it. Do you see handles at the bottom left or right or both? Can you drag them out?
  9. Try to get a screen shot of what is under the Options pop down or note what is turned on and tell us.
  10. Did you use or press on either Z or U?

Image 1

Image 2

Image 3

John C.B.

VideoPro X(16); Movie Studio 2024 Platinum; MM2025 Premium Edition; Samplitude Pro X8 Suite; see About me for more.

Desktop System - Windows 10 Pro 22H2; MB ROG STRIX B560-A Gaming WiFi; Graphics Card Zotac Gaming NVIDIA GeForce RTX-3060, PS; Power supply EVGA 750W; Intel Core i7-10700K @ 3.80GHz (UHD Graphics 630); RAM 32 GB; OS on Kingston SSD 1TB; secondary WD 2TB; others 1.5TB, 3TB, 500GB, 4TB, 5TB, 6TB, 8TB; three monitors - HP 25" main, LG 4K 27" second, HP 27" third; Casio WK-225 piano keyboard; M-Audio M-Track USB mixer.

Notebook - Microsoft Surface Pro 4, i5-6300U, 8 GB RAM, 256 SSD, W10 Pro 20H2.

YouTube Channel: @JCBrownVideos