Comments

AAProds wrote on 11/14/2023, 8:10 AM

@Former user

Gday Gid, checked MEP 2021 and the answer is no. The Size and Posn effect is applied to all, but no prompt/popup. It just happened.

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12

Former user wrote on 11/14/2023, 8:22 AM

@AAProds Yeah but there was a pop-up in the past,, wasn't there? Not just for SPR I though you got the pop-up for most effects.

If you drag a 'Video Effects' from General options the pop-up appears but I've hardly ever used those & yet I still remember this pop-up appearing often 🙃🤷‍♂️

browj2 wrote on 11/14/2023, 8:25 AM

@Former user

Hi,

Not as far as I recall and I checked in MEP2015.

I presume that you are selecting several clips with the first one having the SPR effect, right-clicking on the first one, and looking for "Apply to all selected." It's not there, only "Apply video effects to all" and "Apply video effects to all of the following."

Instead, right click the one with the effects, Video Effects, "Copy video effects" (shortcut - ) and select one or more of the effects that are applied to that clip. Now select the clips that you want to apply the effects to, right-click, Video Effects, "Paste video effects" (shortcut Shift+- ).

John CB

John C.B.

VideoPro X(16); Movie Studio 2024 Platinum; MM2025 Premium Edition; Samplitude Pro X8 Suite; see About me for more.

Desktop System - Windows 10 Pro 22H2; MB ROG STRIX B560-A Gaming WiFi; Graphics Card Zotac Gaming NVIDIA GeForce RTX-3060, PS; Power supply EVGA 750W; Intel Core i7-10700K @ 3.80GHz (UHD Graphics 630); RAM 32 GB; OS on Kingston SSD 1TB; secondary WD 2TB; others 1.5TB, 3TB, 500GB, 4TB, 5TB, 6TB, 8TB; three monitors - HP 25" main, LG 4K 27" second, HP 27" third; Casio WK-225 piano keyboard; M-Audio M-Track USB mixer.

Notebook - Microsoft Surface Pro 4, i5-6300U, 8 GB RAM, 256 SSD, W10 Pro 20H2.

YouTube Channel: @JCBrownVideos

Former user wrote on 11/14/2023, 8:59 AM

@browj2 Thanks, I think I'm going a bit senile but I've had this software for 20yrs & am well aware of the copy n paste, so no i wasn't 'right-clicking, looking for "Apply to all selected"'. I was just going through stuff & then General options effects, I dragged one on & that msg popped up, n I thought hey didn't that use to pop up all the time when more than one clip was selected 🤔🤷‍♂️

@AAProds The Size and Posn effect is applied to all, but no prompt/popup. It just happened.

@AAProds @browj2 The reason behind this post initially started because I was using SPR to change some clips, I changed with SPR the first of 3 selected (out of 4 clips on the timeline) but only the first changed, so no 'Size and Posn effect is Not applied to all', that made look further wondering why & that's when I dragged one of the General options on & that pop-up appeared. That then made me think didn't that pop-up used to appear whenever more then one clip was selected & something like SPR was changed.

Former user wrote on 11/14/2023, 9:06 AM

@AAProds @browj2 Here is the reason I got into this, like i say no SPR is not applied to all selected & no pop-up appears. To apply SPR to all you have to, as you say John, copy n paste, but i could've sworn the pop-up used to appear.

browj2 wrote on 11/14/2023, 9:24 AM

@Former user

Hi,

That is different from what I thought that you were looking for.

Magix changed the way SPR worked when they combined R with SP and added Anchor Points and a button to Apply Effect. Now, you cannot modify SPR values of the selected objects; it only applies the SPR effects to the last one selected. Note that there is a different colour on the last one selected - orange vs yellow for other selected clips. You then have to use the copy/paste as I indicated.

Strangely, if you select several clips for which SPR Apply effect has never been applied, then click on Apply effect, it will apply to all selected clips. However, modifying the parameters of one does not modify the parameters of the other selected clips. Could be an oversight or deliberate; I don't know.

Again, no, I don't think that it ever asked if you wanted to apply the effect to the selected clips, it just did it. I checked this in MEP2015.

John CB

John C.B.

VideoPro X(16); Movie Studio 2024 Platinum; MM2025 Premium Edition; Samplitude Pro X8 Suite; see About me for more.

Desktop System - Windows 10 Pro 22H2; MB ROG STRIX B560-A Gaming WiFi; Graphics Card Zotac Gaming NVIDIA GeForce RTX-3060, PS; Power supply EVGA 750W; Intel Core i7-10700K @ 3.80GHz (UHD Graphics 630); RAM 32 GB; OS on Kingston SSD 1TB; secondary WD 2TB; others 1.5TB, 3TB, 500GB, 4TB, 5TB, 6TB, 8TB; three monitors - HP 25" main, LG 4K 27" second, HP 27" third; Casio WK-225 piano keyboard; M-Audio M-Track USB mixer.

Notebook - Microsoft Surface Pro 4, i5-6300U, 8 GB RAM, 256 SSD, W10 Pro 20H2.

YouTube Channel: @JCBrownVideos

Former user wrote on 11/14/2023, 9:34 AM

@browj2 Yeah strange, I'm going mad I think, like i say I never use the fxs in General Options but have seen that pop-up on several occasions over the yrs .. dunno, doesn't really matter i guess 🤷‍♂️