Movie Studio auto save causes whatever I am dragging to STICK, EVEN WH

Bill-the-repair-guy wrote on 6/26/2024, 8:22 PM

If i am dragging an object or the timeline, when auto save runs it causes whatever to stick. i release the mouse button thinking i am dropping the object or timeline , but no. I think I have but they are still being picked by movie studio. So I have an erratic movement of the mouse b/c i think i dropped the object but end up flinging whatever down range 5 or 10 minutes.

Comments

AAProds wrote on 6/26/2024, 8:28 PM

@Bill-the-repair-guy

You're not the only one. The pointer-grabbing autobackup drives me insane. Nobody else complains about it so I thought it was just me but now you see it, I'll put in a bug report. It really is a menace sometimes.

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12

johnebaker wrote on 6/27/2024, 2:35 AM

@Bill-the-repair-guy

Hi

. . . . down range 5 or 10 minutes. . . . .

Are you saying the program freezes for 5 -10 miutes when the auto save kicks in?

If so this is abnormal, the Autosave should take a few seconds at most. This is on my laptop

.

Check in Windows Settings, Accessibilty, Text Cursor that the Text cursor indicator is turned off.

John EB

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 23H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

AAProds wrote on 6/27/2024, 2:47 AM

@johnebaker @Bill-the-repair-guy

John, I suspect Bill means the object that is now stuck to the mouse pointer is "flung" along the timeline 5 to 10 minutes.

If one is clicking on an object when the backup begins, the object then sticks to the mouse pointer, even when you let the button go, until you re-click. If you move the pointer, you take the object that has stuck to it with it.

My backup takes the same time as yours. The issue occurs if you have an object click+selected eg when preparing to drag it somewhere.

Last changed by AAProds on 6/27/2024, 3:07 AM, changed a total of 1 times.

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12

AAProds wrote on 6/27/2024, 3:04 AM

@johnebaker

Caught it in the act (with commentary):

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12

CubeAce wrote on 6/27/2024, 3:18 AM

@johnebaker @AAProds @Bill-the-repair-guy

This, as Al describes it happens to me all the time.

Pressing Esc on the keyboard normally releases the stuck object from the cursor.

Ray.

 

Windows 10 Enterprise. Version 22H2 OS build 19045.5011

Direct X 12.1 latest hardware updates for Western Digital hard drives.

Asus ROG STRIX Z390-F Gaming motherboard Rev 1.xx with Supreme FX inboard audio using the S1220A code. Driver No 6.0.8960.1 Bios version 1401

Intel i9900K Coffee Lake 3.6 to 5.1GHz CPU with Intel UHD 630 Graphics .Driver version Graphics Driver 31.0.101.2130 for 7th-10th Gen Intel® with 64GB of 3200MHz Corsair DDR4 ram.

1000 watt EVGA modular power supply.

1 x 250GB Evo 970 NVMe: drive for C: drive backup 1 x 1TB Sabrent NVMe drive for Operating System / Programs only. 1X WD BLACK 1TB internal SATA 7,200rpm hard drives.1 for internal projects, 1 for Library clips/sounds/music/stills./backup of working projects. 1x500GB SSD current project only drive, 2x WD RED 2TB drives for latest footage storage. Total 21TB of 8 external WD drives for backup.

ASUS NVIDIA GeForce RTX 3060 12GB. nVidia Studio driver version 560.81 - 3584xCUDA cores Direct X 12.1. Memory interface 192bit Memory bandwidth 360.05GB/s 12GB of dedicated GDDR6 video memory, shared system memory 16307MB PCi Express x8 Gen3. Two Samsung 27" LED SA350 monitors with 5000000:1 contrast ratios at 60Hz.

Running MMS 2024 Suite v 23.0.1.182 (UDP3) and VPX 14 - v20.0.3.180 (UDP3)

M Audio Axiom AIR Mini MIDI keyboard Ver 5.10.0.3507

VXP 14, MMS 2024 Suite, Vegas Studio 16, Vegas Pro 18, Cubase 4. CS6, NX Studio, Mixcraft 9 Recording Studio. Mixcraft Pro 10 Studio.

Audio System 5 x matched bi-wired 150 watt Tannoy Reveal speakers plus one Tannoy 15" 250 watt sub with 5.1 class A amplifier. Tuned to room with Tannoy audio application.

Ram Acoustic Studio speakers amplified by NAD amplifier.

Rogers LS7 speakers run from Cambridge Audio P50 amplifier

Schrodinger's Backup. "The condition of any backup is unknown until a restore is attempted."

johnebaker wrote on 6/27/2024, 4:18 AM

@AAProds, @CubeAce

HI Al, Ray

Thanks for the clarification - well I = (b/a) * pi * i * e / mu .

That is something I have never come across, and what is more I cannot replicate it as shown in your video.

I have tested on PC with a Logitech wireless mice (M185) a Microsoft USB and Logitech Marble Mouse USB devices and on my laptop with a Logitech Bluetooth (M350) and built in touchpad.

The only time I can get a similar effect is by turning on ClickLock in the mouse settings, the 'effect' occurs anytime with a longer, 2 sec plus press on the mouse button irrespective of the autosave.

John EB

Last changed by johnebaker on 6/27/2024, 4:19 AM, changed a total of 1 times.

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 23H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

CubeAce wrote on 6/27/2024, 5:17 AM

@johnebaker

Hi John.

I have never used the mouse click lock setting.

Currently all my mouse settings are as basic as can be.

This has been happening to me since I first used the first version of the program I bought and doesn't happen that often but it maybe because I use the mouse rather than keyboard shorts that I have suffered more.

Ray.

 

Windows 10 Enterprise. Version 22H2 OS build 19045.5011

Direct X 12.1 latest hardware updates for Western Digital hard drives.

Asus ROG STRIX Z390-F Gaming motherboard Rev 1.xx with Supreme FX inboard audio using the S1220A code. Driver No 6.0.8960.1 Bios version 1401

Intel i9900K Coffee Lake 3.6 to 5.1GHz CPU with Intel UHD 630 Graphics .Driver version Graphics Driver 31.0.101.2130 for 7th-10th Gen Intel® with 64GB of 3200MHz Corsair DDR4 ram.

1000 watt EVGA modular power supply.

1 x 250GB Evo 970 NVMe: drive for C: drive backup 1 x 1TB Sabrent NVMe drive for Operating System / Programs only. 1X WD BLACK 1TB internal SATA 7,200rpm hard drives.1 for internal projects, 1 for Library clips/sounds/music/stills./backup of working projects. 1x500GB SSD current project only drive, 2x WD RED 2TB drives for latest footage storage. Total 21TB of 8 external WD drives for backup.

ASUS NVIDIA GeForce RTX 3060 12GB. nVidia Studio driver version 560.81 - 3584xCUDA cores Direct X 12.1. Memory interface 192bit Memory bandwidth 360.05GB/s 12GB of dedicated GDDR6 video memory, shared system memory 16307MB PCi Express x8 Gen3. Two Samsung 27" LED SA350 monitors with 5000000:1 contrast ratios at 60Hz.

Running MMS 2024 Suite v 23.0.1.182 (UDP3) and VPX 14 - v20.0.3.180 (UDP3)

M Audio Axiom AIR Mini MIDI keyboard Ver 5.10.0.3507

VXP 14, MMS 2024 Suite, Vegas Studio 16, Vegas Pro 18, Cubase 4. CS6, NX Studio, Mixcraft 9 Recording Studio. Mixcraft Pro 10 Studio.

Audio System 5 x matched bi-wired 150 watt Tannoy Reveal speakers plus one Tannoy 15" 250 watt sub with 5.1 class A amplifier. Tuned to room with Tannoy audio application.

Ram Acoustic Studio speakers amplified by NAD amplifier.

Rogers LS7 speakers run from Cambridge Audio P50 amplifier

Schrodinger's Backup. "The condition of any backup is unknown until a restore is attempted."

Gid wrote on 6/27/2024, 6:24 AM

I have Click Lock turned on & set for a very short time, it actually annoys me when it doesn't grab the object/s when i click & hold for a moment. That's prob why I've never complained about it, The auto save always seems to gets me as I get to this point when going to export, it clears the screen & I have to click File - Export movie ... again 😡🤦‍♂️😂

I find it preferable to have it turned on, I can still click on anything without grabbing it permanently, or I can click & hold for fraction of a second - drag - click again to drop. No need for keeping your finger pressed & having the potential of dropping it somewhere you don't want it to drop it.

Magix Movie Studio 2025
Magix VPX14
Vegas Pro 21

Boris Continuum & Sapphire, 
Silhouette Standalone + Plugin, 
Mocha Pro Standalone + Plugin, 
Boris Optics,
NewBlue TotalFX
Desktop PC Microsoft Windows 10 Pro - 64-Bit
ASUS PRO WS WRX80E-SAGE SE WIFI AMD Motherboard
AMD Ryzen Threadripper PRO 3975WX 3.5GHz 32 Core
Corsair iCUE H150i RGB PRO XT 360mm All-in-One Liquid CPU Cooler
RAM 256GB ( 8x Micron 32GB (1x 32GB) 2666MHz DDR4 RAM )
2x Western Digital Black SN850 2TB M.2-2280 SSD, 7000MB/s Read, 5100MB/s Write
(programs on one, project files on the other)
Graphics MSI GeForce RTX 3090 SUPRIM X 24GB OC GPU
ASUS ROG Thor 1200W Semi-Modular 80+ Platinum PSU 
Fractal Design Define 7 XL Dark TG Case with 3 Fans
Dell SE3223Q 31.5 Inch 4K UHD (3840x2160) Monitor, 60Hz, & an Acer 24" monitor.

At the moment my filming is done with a Samsung Galaxy S23 Ultra 5G & a GoPro11

I've been a Joiner/Carpenter for 40yrs, apprentice trained time served, I don't have an apprentice of my own so to share my knowledge I put videos on YouTube.

YouTube videos - https://www.youtube.com/c/Gidjoiner

Lots of work photos on Facebook - https://www.facebook.com/gid.joiner/photos_albums

 

Bill-the-repair-guy wrote on 6/27/2024, 8:16 AM

@Bill-the-repair-guy

Hi

. . . . down range 5 or 10 minutes. . . . .

Are you saying the program freezes for 5 -10 miutes when the auto save kicks in?

If so this is abnormal, the Autosave should take a few seconds at most. This is on my laptop

.

Check in Windows Settings, Accessibilty, Text Cursor that the Text cursor indicator is turned off.

John EB

no, what i am saying is that i think i dropped the object and i then move my mouse erratically so the object either zooms forward minutes or backwards minutes......just like if i had held the mouse button intentionally... no freezing

johnebaker wrote on 6/27/2024, 8:33 AM

@Bill-the-repair-guy

HI

Did you check the mouse option I mentioned in my last comment is not turned on?

John EB

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 23H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

AAProds wrote on 6/27/2024, 9:15 AM

This came in a few versions back but certainly wasn't around in the early days.

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12

Bill-the-repair-guy wrote on 6/29/2024, 8:54 PM

@Bill-the-repair-guy

HI

Did you check the mouse option I mentioned in my last comment is not turned on?

John EB

Yes sir. it's set to off I am using a second monitor so I cannot keep an eye on when the app does an update so I end up 20 minutes to an hour away or more from where I was editing, got so frustrating I went in and turned off auto updates. when i am done for the day i save my program as REV1, next day REV2 ...etc, while using the MS 2003 plat i save every 10 minutes or so.

johnebaker wrote on 6/30/2024, 2:03 AM

@Bill-the-repair-guy

Hi

. . . . when the app does an update so I end up 20 minutes to an hour away or more from where I was editing, got so frustrating I went in and turned off auto updates. . . . .

Can you clarify what you mean by 'auto updates', the topic started off about the Auto save feature which cannot be turned off, however you can extend the interval to a maximum of 60 mins.

Thanks

John EB

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 23H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

CubeAce wrote on 6/30/2024, 4:28 AM

@johnebaker

the topic started off about the Auto save feature which cannot be turned off, however you can extend the interval to a maximum of 60 mins.

Hi John.

Is that true? That if I do not tick the box to auto-save that the program will auto-save every hour?

Ray.

 

Windows 10 Enterprise. Version 22H2 OS build 19045.5011

Direct X 12.1 latest hardware updates for Western Digital hard drives.

Asus ROG STRIX Z390-F Gaming motherboard Rev 1.xx with Supreme FX inboard audio using the S1220A code. Driver No 6.0.8960.1 Bios version 1401

Intel i9900K Coffee Lake 3.6 to 5.1GHz CPU with Intel UHD 630 Graphics .Driver version Graphics Driver 31.0.101.2130 for 7th-10th Gen Intel® with 64GB of 3200MHz Corsair DDR4 ram.

1000 watt EVGA modular power supply.

1 x 250GB Evo 970 NVMe: drive for C: drive backup 1 x 1TB Sabrent NVMe drive for Operating System / Programs only. 1X WD BLACK 1TB internal SATA 7,200rpm hard drives.1 for internal projects, 1 for Library clips/sounds/music/stills./backup of working projects. 1x500GB SSD current project only drive, 2x WD RED 2TB drives for latest footage storage. Total 21TB of 8 external WD drives for backup.

ASUS NVIDIA GeForce RTX 3060 12GB. nVidia Studio driver version 560.81 - 3584xCUDA cores Direct X 12.1. Memory interface 192bit Memory bandwidth 360.05GB/s 12GB of dedicated GDDR6 video memory, shared system memory 16307MB PCi Express x8 Gen3. Two Samsung 27" LED SA350 monitors with 5000000:1 contrast ratios at 60Hz.

Running MMS 2024 Suite v 23.0.1.182 (UDP3) and VPX 14 - v20.0.3.180 (UDP3)

M Audio Axiom AIR Mini MIDI keyboard Ver 5.10.0.3507

VXP 14, MMS 2024 Suite, Vegas Studio 16, Vegas Pro 18, Cubase 4. CS6, NX Studio, Mixcraft 9 Recording Studio. Mixcraft Pro 10 Studio.

Audio System 5 x matched bi-wired 150 watt Tannoy Reveal speakers plus one Tannoy 15" 250 watt sub with 5.1 class A amplifier. Tuned to room with Tannoy audio application.

Ram Acoustic Studio speakers amplified by NAD amplifier.

Rogers LS7 speakers run from Cambridge Audio P50 amplifier

Schrodinger's Backup. "The condition of any backup is unknown until a restore is attempted."

johnebaker wrote on 6/30/2024, 4:53 AM

@CubeAce

Hi Ray

Oops, confirmation bias crept in there while checking the dialog, thanks for the heads up.

@Bill-the-repair-guy

Hi

Please ignore my previous comment regarding turning off Autosave.

John EB

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 23H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.