MEP2021 and MMS2024-"DV Camera" Recording-No Video in Preview Monitor

AAProds wrote on 9/19/2023, 3:03 AM

I can't get a picture in the DV Camera recording dialogue preview monitor. The camera is recognised OK, I have full device control via the dialogue. A dark grey box appears where the video should be, and a very occasional flash of video appears, but mostly it's just blank. Unticking "video preview" results in the preview going light-grey blank. I've tried all the graphics card settings.

Scenalyzer works OK.

Anybody else having the same issue?

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12

Comments

CubeAce wrote on 9/19/2023, 3:13 AM

@AAProds

Hi Al.

Is it possible you have oxidised connections somewhere in the chain?

Ray.

 

Windows 10 Enterprise. Version 22H2 OS build 19045.5011

Direct X 12.1 latest hardware updates for Western Digital hard drives.

Asus ROG STRIX Z390-F Gaming motherboard Rev 1.xx with Supreme FX inboard audio using the S1220A code. Driver No 6.0.8960.1 Bios version 1401

Intel i9900K Coffee Lake 3.6 to 5.1GHz CPU with Intel UHD 630 Graphics .Driver version Graphics Driver 31.0.101.2130 for 7th-10th Gen Intel® with 64GB of 3200MHz Corsair DDR4 ram.

1000 watt EVGA modular power supply.

1 x 250GB Evo 970 NVMe: drive for C: drive backup 1 x 1TB Sabrent NVMe drive for Operating System / Programs only. 1X WD BLACK 1TB internal SATA 7,200rpm hard drives.1 for internal projects, 1 for Library clips/sounds/music/stills./backup of working projects. 1x500GB SSD current project only drive, 2x WD RED 2TB drives for latest footage storage. Total 21TB of 8 external WD drives for backup.

ASUS NVIDIA GeForce RTX 3060 12GB. nVidia Studio driver version 560.81 - 3584xCUDA cores Direct X 12.1. Memory interface 192bit Memory bandwidth 360.05GB/s 12GB of dedicated GDDR6 video memory, shared system memory 16307MB PCi Express x8 Gen3. Two Samsung 27" LED SA350 monitors with 5000000:1 contrast ratios at 60Hz.

Running MMS 2024 Suite v 23.0.1.182 (UDP3) and VPX 14 - v20.0.3.180 (UDP3)

M Audio Axiom AIR Mini MIDI keyboard Ver 5.10.0.3507

VXP 14, MMS 2024 Suite, Vegas Studio 16, Vegas Pro 18, Cubase 4. CS6, NX Studio, Mixcraft 9 Recording Studio. Mixcraft Pro 10 Studio.

Audio System 5 x matched bi-wired 150 watt Tannoy Reveal speakers plus one Tannoy 15" 250 watt sub with 5.1 class A amplifier. Tuned to room with Tannoy audio application.

Ram Acoustic Studio speakers amplified by NAD amplifier.

Rogers LS7 speakers run from Cambridge Audio P50 amplifier

Schrodinger's Backup. "The condition of any backup is unknown until a restore is attempted."

AAProds wrote on 9/19/2023, 3:46 AM

@CubeAce

Ray, no. I said Scenalyzer works fine.

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12

AAProds wrote on 9/19/2023, 3:49 AM

All, I've just checked this on my Win 10 machine with the Legacy IEEE1394 Legacy Driver and all is well with Magix and DV camcorders.

The problem exists on my Win 11 machine. It has the VIA Win 11 IEEE1394 driver installed.

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12

CubeAce wrote on 9/19/2023, 3:57 AM

@AAProds

Hi Al.

Sorry that phrase meant nothing to me so had no idea of it's relevance.

Ray.

 

Windows 10 Enterprise. Version 22H2 OS build 19045.5011

Direct X 12.1 latest hardware updates for Western Digital hard drives.

Asus ROG STRIX Z390-F Gaming motherboard Rev 1.xx with Supreme FX inboard audio using the S1220A code. Driver No 6.0.8960.1 Bios version 1401

Intel i9900K Coffee Lake 3.6 to 5.1GHz CPU with Intel UHD 630 Graphics .Driver version Graphics Driver 31.0.101.2130 for 7th-10th Gen Intel® with 64GB of 3200MHz Corsair DDR4 ram.

1000 watt EVGA modular power supply.

1 x 250GB Evo 970 NVMe: drive for C: drive backup 1 x 1TB Sabrent NVMe drive for Operating System / Programs only. 1X WD BLACK 1TB internal SATA 7,200rpm hard drives.1 for internal projects, 1 for Library clips/sounds/music/stills./backup of working projects. 1x500GB SSD current project only drive, 2x WD RED 2TB drives for latest footage storage. Total 21TB of 8 external WD drives for backup.

ASUS NVIDIA GeForce RTX 3060 12GB. nVidia Studio driver version 560.81 - 3584xCUDA cores Direct X 12.1. Memory interface 192bit Memory bandwidth 360.05GB/s 12GB of dedicated GDDR6 video memory, shared system memory 16307MB PCi Express x8 Gen3. Two Samsung 27" LED SA350 monitors with 5000000:1 contrast ratios at 60Hz.

Running MMS 2024 Suite v 23.0.1.182 (UDP3) and VPX 14 - v20.0.3.180 (UDP3)

M Audio Axiom AIR Mini MIDI keyboard Ver 5.10.0.3507

VXP 14, MMS 2024 Suite, Vegas Studio 16, Vegas Pro 18, Cubase 4. CS6, NX Studio, Mixcraft 9 Recording Studio. Mixcraft Pro 10 Studio.

Audio System 5 x matched bi-wired 150 watt Tannoy Reveal speakers plus one Tannoy 15" 250 watt sub with 5.1 class A amplifier. Tuned to room with Tannoy audio application.

Ram Acoustic Studio speakers amplified by NAD amplifier.

Rogers LS7 speakers run from Cambridge Audio P50 amplifier

Schrodinger's Backup. "The condition of any backup is unknown until a restore is attempted."