Hello, I have a sudden issue with the menu encoding on MEP 2018. Its on my laptop and every other DVD I have edited and rendered has been perfect, up until this one.
Its nothing technical video wise, mainly just 1 camera with fades and titles during the 90minute film. I have added chapter points at various points as I usually do, nothing different and using the same menu template as before. Exactly the same as the previous DVD I made on the program and machine.
But it seems to render ok, then come up with an error message saying 'menu encoding failed' before doing anything to disc.
The only change has been an automatic windows 10 update. A previous windows update caused a sound issue, so has the new update caused an issue with menu encoding? If so, how do you fix it?
I have the error log which I will post below. Any help would be great.
Thanks.
Nick
-------------------------- 16/08/2018 12:41:47 --------------------------
16/08/2018 12:41:47.890: DLLAV32.DLL loaded, all entry points available
16/08/2018 12:41:48.097: AVSDK MsgCbFunc registered
16/08/2018 12:41:48.098: AVSDK: StatCbFunc registered
16/08/2018 12:41:48.248: AVSDK Version 13.0.247
16/08/2018 12:41:48.249: ------------ Reading Device Info ----------------
16/08/2018 12:41:48.250: AVSDK: 1 device(s) found
16/08/2018 12:41:48.251: BurnSupport: 1 device(s) found
16/08/2018 12:41:48.252: Adapter=0 ID=1 LUN=0 E:hp DVDRW DA8AESH Revision:XH61
16/08/2018 12:41:48.253: BurnSupport: 1 record device(s) available
16/08/2018 12:41:48.254: BurnSupport: E: hp DVDRW DA8AESH Rev. XH61
16/08/2018 12:41:48.255: ------------ done ----------------
16/08/2018 12:58:05.112: ------------ Reading Device Info ----------------
16/08/2018 12:58:05.128: AVSDK: 1 device(s) found
16/08/2018 12:58:05.128: BurnSupport: 1 device(s) found
16/08/2018 12:58:05.128: Adapter=0 ID=1 LUN=0 E:hp DVDRW DA8AESH Revision:XH61
16/08/2018 12:58:05.128: BurnSupport: 1 record device(s) available
16/08/2018 12:58:05.143: BurnSupport: E: hp DVDRW DA8AESH Rev. XH61
16/08/2018 12:58:05.143: ------------ done ----------------
16/08/2018 12:58:05.362: setting no speed limit
16/08/2018 12:58:05.362: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
16/08/2018 12:58:16.203: Open Project: MILDO_BWS_2018 -- dvd project 2018-08-16
16/08/2018 12:58:16.203: VideoMode: PAL Temp Dir: C:\Users\Nick\Documents\MAGIX\Movie Edit Pro Premium\Disc Images\
16/08/2018 12:58:16.203: dll version 6.0.10.39
16/08/2018 12:58:16.203: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
16/08/2018 12:58:16.203: EstimateLayerSplitPoint()...
16/08/2018 12:58:16.219: Splitpunkt 4271833088 auf Disk mit Größe 4650041344
16/08/2018 12:58:16.219: Title an Stelle 0, Länge 131072, Typ 0
16/08/2018 12:58:16.219: Title an Stelle 131072, Länge 4649910272, Typ 1
16/08/2018 12:58:16.219: Split berechnen...
16/08/2018 12:58:16.219: Title an Stelle 0, Länge 131072, Typ 0
16/08/2018 12:58:16.219: Title an Stelle 131072, Länge 4649910272, Typ 1
16/08/2018 12:58:16.219: Split in HMOVIE 395a1060, Position in Datei 4271702016
16/08/2018 12:58:21.495: Step 1 of 4, Encoding movie 1 ...
16/08/2018 12:58:21.495: Eintragen des Splitpunktes 4271702016 bei ConvertMovie(395a1060)
16/08/2018 12:58:21.573: Step 1 done
16/08/2018 12:58:21.573: Step 2 of 4, Encoding movie menu...
16/08/2018 12:58:23.995: Step 2 done
16/08/2018 12:58:23.995: Step 3 of 4, Encoding chapter menu 1 ...
16/08/2018 12:58:23.995: Step 3 done
16/08/2018 12:58:24.010: ConvertMovie() - encoded file: C:\Users\Nick\Documents\MAGIX\Movie Edit Pro Premium\Disc Images\DVD Image MILDO_BWS_2018\VTS_01_1.VOB
16/08/2018 12:58:24.104: Step 4 of 4, Creating DVD image...
16/08/2018 12:58:24.588: Step 4 done
16/08/2018 12:58:26.806: Step 4 of 4
16/08/2018 12:58:26.806: Step 4 done
16/08/2018 12:58:26.806: requested recorder feature:
16/08/2018 12:58:26.806: cache size: 16.000000.1 MB
16/08/2018 12:58:26.806: write speed: 4057.617188.1 KB/s
16/08/2018 12:58:26.806: book type: 0
16/08/2018 12:58:26.806: burn over: no
16/08/2018 12:58:26.822: simulate: no
16/08/2018 12:58:26.822: disc at once: no
16/08/2018 12:58:26.822: burn proof: yes
16/08/2018 12:58:26.822: format disc: no
16/08/2018 12:58:26.822: short leadout: no
16/08/2018 12:58:26.822: no defect mgmt: no
16/08/2018 12:58:26.822: verify after burn:no
16/08/2018 12:58:26.822: ------------ OpenRecorderSetOptions Point ----------------
16/08/2018 12:58:26.901: setting PoINT cache size to 16777216l
16/08/2018 12:58:26.901: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
16/08/2018 12:58:26.901: Booktype: don't care
16/08/2018 12:58:26.916: setting write speed to 4155000 bytes/sec
16/08/2018 12:58:26.916: this equals 3.000000x DVD / 23.554422x CD Speed
16/08/2018 12:58:26.916: ------------ done: succeeded ----------------
16/08/2018 12:58:26.916: ------------ CreateAPIProject ----------------
16/08/2018 12:58:26.916: Step 4 of 4
16/08/2018 12:58:26.916: creating DVD project in prepfile mode...
16/08/2018 12:58:26.916: create volume... OK
16/08/2018 12:58:26.931: verify option OFF
16/08/2018 12:58:26.931: set project options... OK
16/08/2018 12:58:26.931: adding file "C:\Users\Nick\Documents\MAGIX\Movie Edit Pro Premium\Disc Images\DVD Image MILDO_BWS_2018\VIDEO_TS.IFO"
16/08/2018 12:58:26.931: adding file "C:\Users\Nick\Documents\MAGIX\Movie Edit Pro Premium\Disc Images\DVD Image MILDO_BWS_2018\VTS_01_1.VOB"
16/08/2018 12:58:26.931: adding file "C:\Users\Nick\Documents\MAGIX\Movie Edit Pro Premium\Disc Images\DVD Image MILDO_BWS_2018\VTS_01_0.IFO"
16/08/2018 12:58:26.931: adding file "C:\Users\Nick\Documents\MAGIX\Movie Edit Pro Premium\Disc Images\DVD Image MILDO_BWS_2018\VTS_01_0.VOB"
16/08/2018 12:58:26.947: Step 4 done
16/08/2018 12:58:26.947: ------------ done ----------------
16/08/2018 12:58:26.947: Step 4 of 4
16/08/2018 12:58:26.947: ------------ BurnToDisc ----------------
16/08/2018 12:58:26.947: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
16/08/2018 12:58:26.947: Booktype: don't care
16/08/2018 12:58:26.947: setting write speed to 4155000 bytes/sec
16/08/2018 12:58:26.947: this equals 3.000000x DVD / 23.554422x CD Speed
16/08/2018 12:58:26.963: mounting volume on device...OK
16/08/2018 12:58:26.963: Check on previously direct recorded session...OK
16/08/2018 12:58:26.963: -- Volume mounted --
16/08/2018 12:58:26.963: -- Recording on "E: hp DVDRW DA8AESH" --
16/08/2018 12:58:26.963: -- Medium is "DVD+R" --
16/08/2018 12:58:26.963: -- Manufacturer "TTH02" --
16/08/2018 12:58:26.978: AVSDK Message - INFO: :Recording volume ...
16/08/2018 12:58:26.978: AVSDK Status - Begin operation Recording 8416 sectors/frames
16/08/2018 12:58:26.994: AVSDK Message - INFO: :Recording -> writing data ...
16/08/2018 12:58:27.619: wrote LeadIn, start DataCopy
16/08/2018 12:59:26.218: writing leadout and closing disc
16/08/2018 13:03:49.459: writing leadout and closing disc
16/08/2018 13:03:49.459: AVSDK Status - End operation Recording 8416 sectors/frames
16/08/2018 13:03:49.459: AVSDK Message - INFO: :Recording successfully completed
16/08/2018 13:03:52.161: ------------ done ----------------
16/08/2018 13:03:52.161: Step 4 done
16/08/2018 13:04:16.070: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
16/08/2018 13:04:16.086: DEVICE REMOVAL
-------------------------- 16/08/2018 15:13:55 --------------------------
16/08/2018 15:13:55.344: DLLAV32.DLL loaded, all entry points available
16/08/2018 15:13:55.344: AVSDK MsgCbFunc registered
16/08/2018 15:13:55.344: AVSDK: StatCbFunc registered
16/08/2018 15:13:55.484: AVSDK Version 13.0.247
16/08/2018 15:13:55.500: ------------ Reading Device Info ----------------
16/08/2018 15:13:55.500: AVSDK: 1 device(s) found
16/08/2018 15:13:55.516: BurnSupport: 1 device(s) found
16/08/2018 15:13:55.516: Adapter=0 ID=1 LUN=0 E:hp DVDRW DA8AESH Revision:XH61
16/08/2018 15:13:55.516: BurnSupport: 1 record device(s) available
16/08/2018 15:13:55.516: BurnSupport: E: hp DVDRW DA8AESH Rev. XH61
16/08/2018 15:13:55.516: ------------ done ----------------
16/08/2018 15:13:55.906: setting no speed limit
16/08/2018 15:13:55.906: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
16/08/2018 15:14:02.152: Open Project: MILDO_BWS_2018 -- dvd project 2018-08-16
16/08/2018 15:14:02.152: VideoMode: PAL Temp Dir: C:\Users\Nick\Documents\MAGIX\Movie Edit Pro Premium\Disc Images\
16/08/2018 15:14:02.152: dll version 6.0.10.39
16/08/2018 15:14:02.167: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
16/08/2018 15:14:02.167: EstimateLayerSplitPoint()...
16/08/2018 15:14:02.167: Splitpunkt 4271833088 auf Disk mit Größe 4650041344
16/08/2018 15:14:02.167: Title an Stelle 0, Länge 131072, Typ 0
16/08/2018 15:14:02.167: Title an Stelle 131072, Länge 4649910272, Typ 1
16/08/2018 15:14:02.167: Split berechnen...
16/08/2018 15:14:02.167: Title an Stelle 0, Länge 131072, Typ 0
16/08/2018 15:14:02.167: Title an Stelle 131072, Länge 4649910272, Typ 1
16/08/2018 15:14:02.167: Split in HMOVIE 29b156e0, Position in Datei 4271702016
16/08/2018 15:14:04.138: Step 1 of 4, Encoding movie 1 ...
16/08/2018 15:14:04.153: Eintragen des Splitpunktes 4271702016 bei ConvertMovie(29b156e0)
16/08/2018 16:55:24.858: Step 1 done
16/08/2018 16:55:24.858: Step 2 of 4, Encoding movie menu...
16/08/2018 16:55:25.810: Step 2 done
16/08/2018 16:55:25.842: ERROR: PrepareDVDVideoFiles() failed with errNo 13 - menu rendering failed
16/08/2018 16:55:25.857: !!! DBK error in BurnProject: 11 - menu encoding failed !!!