Magix Travel Maps not showing the path

DNL wrote on 10/1/2024, 4:33 AM

I have Magix Travel Maps (version 5.0.0.501) and Magix Movie Studio 2025 Platinum installed on a computer running Windows 10 Pro. When I add various locations to the map, the path or route between them does not display. I’ve tried adjusting different path line settings, but I still can’t get the path to show. Do you have any idea what could be causing this issue?

Comments

johnebaker wrote on 10/1/2024, 6:51 AM

@DNL

Hi

Is the Line transparency set to 100% ?

If not, post a screen shot of the program window with the line properties dialog open.

John EB

Forum Moderator

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 23H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

DNL wrote on 10/1/2024, 9:40 AM

Hi John

Thanks for your support. Please see below:

Bol wrote on 10/2/2024, 11:26 AM

@DNL

Hello DNL,

I can't reproduce your problem. What you could do is to remove Magix Travel Maps.

Start Video Deluxe and go to: Help / Install additional content and reinstall Magix Travel Maps.

Good luck,
Rob

Als een kwestie onoplosbaar lijkt, komt dat niet omdat je de oplossing niet ziet, maar omdat je het probleem niet ziet.

If an issue seems unsolvable, it is not because you do not see the solution, but because you do not see the problem.

PC -1-

PC -2-

CubeAce wrote on 10/3/2024, 5:48 AM

@DNL

Hi.

You need to set that transparency level to 100%.

Ray.

 

Windows 10 Enterprise. Version 22H2 OS build 19045.5011

Direct X 12.1 latest hardware updates for Western Digital hard drives.

Asus ROG STRIX Z390-F Gaming motherboard Rev 1.xx with Supreme FX inboard audio using the S1220A code. Driver No 6.0.8960.1 Bios version 1401

Intel i9900K Coffee Lake 3.6 to 5.1GHz CPU with Intel UHD 630 Graphics .Driver version Graphics Driver 31.0.101.2130 for 7th-10th Gen Intel® with 64GB of 3200MHz Corsair DDR4 ram.

1000 watt EVGA modular power supply.

1 x 250GB Evo 970 NVMe: drive for C: drive backup 1 x 1TB Sabrent NVMe drive for Operating System / Programs only. 1X WD BLACK 1TB internal SATA 7,200rpm hard drives.1 for internal projects, 1 for Library clips/sounds/music/stills./backup of working projects. 1x500GB SSD current project only drive, 2x WD RED 2TB drives for latest footage storage. Total 21TB of 8 external WD drives for backup.

ASUS NVIDIA GeForce RTX 3060 12GB. nVidia Studio driver version 560.81 - 3584xCUDA cores Direct X 12.1. Memory interface 192bit Memory bandwidth 360.05GB/s 12GB of dedicated GDDR6 video memory, shared system memory 16307MB PCi Express x8 Gen3. Two Samsung 27" LED SA350 monitors with 5000000:1 contrast ratios at 60Hz.

Running MMS 2024 Suite v 23.0.1.182 (UDP3) and VPX 14 - v20.0.3.180 (UDP3)

M Audio Axiom AIR Mini MIDI keyboard Ver 5.10.0.3507

VXP 14, MMS 2024 Suite, Vegas Studio 16, Vegas Pro 18, Cubase 4. CS6, NX Studio, Mixcraft 9 Recording Studio. Mixcraft Pro 10 Studio.

Audio System 5 x matched bi-wired 150 watt Tannoy Reveal speakers plus one Tannoy 15" 250 watt sub with 5.1 class A amplifier. Tuned to room with Tannoy audio application.

Ram Acoustic Studio speakers amplified by NAD amplifier.

Rogers LS7 speakers run from Cambridge Audio P50 amplifier

Schrodinger's Backup. "The condition of any backup is unknown until a restore is attempted."

Bol wrote on 10/3/2024, 6:09 AM

@CubeAce

Hi Ray,

To show the path or route between cities, the transparency must be set to 0%. At 100% the path or route becomes invisible. Hence my advice to reinstall Travel Maps.

Best wishes,
Rob

Als een kwestie onoplosbaar lijkt, komt dat niet omdat je de oplossing niet ziet, maar omdat je het probleem niet ziet.

If an issue seems unsolvable, it is not because you do not see the solution, but because you do not see the problem.

PC -1-

PC -2-

CubeAce wrote on 10/3/2024, 6:47 AM

@Bol

Hi Rob.

So would the current 20 % set also not be enough?

Ray.

 

Windows 10 Enterprise. Version 22H2 OS build 19045.5011

Direct X 12.1 latest hardware updates for Western Digital hard drives.

Asus ROG STRIX Z390-F Gaming motherboard Rev 1.xx with Supreme FX inboard audio using the S1220A code. Driver No 6.0.8960.1 Bios version 1401

Intel i9900K Coffee Lake 3.6 to 5.1GHz CPU with Intel UHD 630 Graphics .Driver version Graphics Driver 31.0.101.2130 for 7th-10th Gen Intel® with 64GB of 3200MHz Corsair DDR4 ram.

1000 watt EVGA modular power supply.

1 x 250GB Evo 970 NVMe: drive for C: drive backup 1 x 1TB Sabrent NVMe drive for Operating System / Programs only. 1X WD BLACK 1TB internal SATA 7,200rpm hard drives.1 for internal projects, 1 for Library clips/sounds/music/stills./backup of working projects. 1x500GB SSD current project only drive, 2x WD RED 2TB drives for latest footage storage. Total 21TB of 8 external WD drives for backup.

ASUS NVIDIA GeForce RTX 3060 12GB. nVidia Studio driver version 560.81 - 3584xCUDA cores Direct X 12.1. Memory interface 192bit Memory bandwidth 360.05GB/s 12GB of dedicated GDDR6 video memory, shared system memory 16307MB PCi Express x8 Gen3. Two Samsung 27" LED SA350 monitors with 5000000:1 contrast ratios at 60Hz.

Running MMS 2024 Suite v 23.0.1.182 (UDP3) and VPX 14 - v20.0.3.180 (UDP3)

M Audio Axiom AIR Mini MIDI keyboard Ver 5.10.0.3507

VXP 14, MMS 2024 Suite, Vegas Studio 16, Vegas Pro 18, Cubase 4. CS6, NX Studio, Mixcraft 9 Recording Studio. Mixcraft Pro 10 Studio.

Audio System 5 x matched bi-wired 150 watt Tannoy Reveal speakers plus one Tannoy 15" 250 watt sub with 5.1 class A amplifier. Tuned to room with Tannoy audio application.

Ram Acoustic Studio speakers amplified by NAD amplifier.

Rogers LS7 speakers run from Cambridge Audio P50 amplifier

Schrodinger's Backup. "The condition of any backup is unknown until a restore is attempted."

Bol wrote on 10/3/2024, 7:57 AM

@CubeAce

Hi Ray,

By default they are set to:

  • Line thickness 6px
  • Transparency 20%

Best wishes,
Rob

Als een kwestie onoplosbaar lijkt, komt dat niet omdat je de oplossing niet ziet, maar omdat je het probleem niet ziet.

If an issue seems unsolvable, it is not because you do not see the solution, but because you do not see the problem.

PC -1-

PC -2-