Intel Graphics Driver Disabling Waking Up By Mouse/KB bump

AAProds wrote on 4/8/2024, 8:10 AM

Not strictly a on-subject topic but knowing you lot are hot on the latest drivers...

If you're recently developed trouble with your PC not waking up when you bump the mouse (it stays sleeping), it's probably the process "Intel Dynamic Application Loader Host Interface" that is causing the problem. If that is killed, the mouse wakes my machine from sleep. If that process is running, the machine won't wake to a mouse/KB bump.

It took me a while to figure out via a process of elimination (glad my machine restarts fast!) but I'm pretty sure that's it. Earlier intel drivers are OK (I have tried 31.0.101.4577 and that's fine). The one that's causing me grief is the current one, 5382.

I've reported it to Intel.

Cheers, Al

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12

Comments

johnebaker wrote on 4/8/2024, 12:16 PM

@AAProds

Hi Al

. . . . "Intel Dynamic Application Loader Host Interface" . . . .

Thanks for the heads-up, what is the version number of the jhi_services.exe in

C:\WINDOWS\System32\DriverStore\FileRepository\dal.inf_amd64_b5484efd38adbe8d\jhi_service.exe

It appears to be the culprit and I suspect that yours is newer than mine which is 1.41.2021.12 and no issues.

John EB

ย 

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 23H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

me_again wrote on 4/8/2024, 2:29 PM

@AAProds @johnebaker

My version is the same as John's - I suspect anyway. No problems here at the moment.

AndyW

"Just when I think I've learned the workrounds of MEP/MS the bounders go and update it"

Aorus Z690 Elite DDR4 Motherboard

12th Gen Intel(R) Core(TM) i7-12700K, 3600 Mhz, 12 Core(s) 20 Logical Processor(s)

64gb (4x16gb sticks) DDR4 3200Mhz

Intel(R) UHD Graphics 770

Gigabyte GeForce RTX 4060 Eagle OC 8Gb DDR6 DLSS3 Windforce

Corsair RM750 PSU, be quiet! Pure Rock 2 cooling

System drive 500Gb 4.0NVMe M,2 SSD, dedicated video/audio drive 2Tb Gen 4 NVMe SSD,ย 2x 500Gb Local Fixed Disks (Music etc), USB3 expansion drive 5Tb and 2Tb

Audio Onboard ALC1220 Amp-Up, Windows 11 Home updated as and when

Movie Studio 2025 Suite, Photo Manager Deluxe 13

Norton 360

All Drivers updated as they become available.

AAProds wrote on 4/8/2024, 7:23 PM

The plot thickens; after I was sure I had it worked out, taking out the application loader file, the problem started again. In the end, I ended every Intel process, leaving only the driver:

and it was still doing it, so I rolled back to 5085 and all is well.

@johnebaker

John, with the 5085 driver, here are my jhi_service details (apologies for the camera, only way I could get the details box captured):

@me_again

"Keep calm and drink tea" came to mind during the hours this has taken me to (not) sort out! ๐Ÿ˜

ย 

Last changed by AAProds on 4/8/2024, 7:23 PM, changed a total of 1 times.

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12

AAProds wrote on 4/8/2024, 8:51 PM

@me_again @johnebaker

Andy/John, are you on the latest driver (5382)? Your jhi_service file is the same as mine (I'm now on the 5085 driver).

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12

Can-Dive wrote on 4/8/2024, 10:37 PM

@AAProds,

I have the same jhi_service as you but my driver is 5333. Everything fine at my end. Rule of thumb; If it isn't broken, don't try and fix it.๐Ÿ”ง

ย 

AAProds wrote on 4/8/2024, 11:12 PM

@Can-Dive

Rule of thumb; If it isn't broken, don't try and fix it.๐Ÿ”ง

Yep, this is a good example of that! ๐Ÿ˜‚

This only started a couple of weeks or so ago, so it must be the version after 5333: either 5379 or 5382.

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12

me_again wrote on 4/9/2024, 12:28 AM

@AAProds

Yes Al, latest driver.

AndyW

"Just when I think I've learned the workrounds of MEP/MS the bounders go and update it"

Aorus Z690 Elite DDR4 Motherboard

12th Gen Intel(R) Core(TM) i7-12700K, 3600 Mhz, 12 Core(s) 20 Logical Processor(s)

64gb (4x16gb sticks) DDR4 3200Mhz

Intel(R) UHD Graphics 770

Gigabyte GeForce RTX 4060 Eagle OC 8Gb DDR6 DLSS3 Windforce

Corsair RM750 PSU, be quiet! Pure Rock 2 cooling

System drive 500Gb 4.0NVMe M,2 SSD, dedicated video/audio drive 2Tb Gen 4 NVMe SSD,ย 2x 500Gb Local Fixed Disks (Music etc), USB3 expansion drive 5Tb and 2Tb

Audio Onboard ALC1220 Amp-Up, Windows 11 Home updated as and when

Movie Studio 2025 Suite, Photo Manager Deluxe 13

Norton 360

All Drivers updated as they become available.

me_again wrote on 4/9/2024, 12:42 AM

@AAProds

Just had a thought Al, do you use a USB mouse / keyboard?

If so maybe Windows is suspending USB in your power settings - I access them from the old style Control Panel, the new fangled Windows way I find slightly confusing.

II've disabled USB suspend since Windows 10 as it was preventing my PCTV stick from timer recording. That's probably why my USB M&K wake my computer.

AndyW

Last changed by me_again on 4/9/2024, 12:46 AM, changed a total of 1 times.

"Just when I think I've learned the workrounds of MEP/MS the bounders go and update it"

Aorus Z690 Elite DDR4 Motherboard

12th Gen Intel(R) Core(TM) i7-12700K, 3600 Mhz, 12 Core(s) 20 Logical Processor(s)

64gb (4x16gb sticks) DDR4 3200Mhz

Intel(R) UHD Graphics 770

Gigabyte GeForce RTX 4060 Eagle OC 8Gb DDR6 DLSS3 Windforce

Corsair RM750 PSU, be quiet! Pure Rock 2 cooling

System drive 500Gb 4.0NVMe M,2 SSD, dedicated video/audio drive 2Tb Gen 4 NVMe SSD,ย 2x 500Gb Local Fixed Disks (Music etc), USB3 expansion drive 5Tb and 2Tb

Audio Onboard ALC1220 Amp-Up, Windows 11 Home updated as and when

Movie Studio 2025 Suite, Photo Manager Deluxe 13

Norton 360

All Drivers updated as they become available.

johnebaker wrote on 4/9/2024, 1:50 AM

@AAProds

Hi

I am on the latest for my iGPU - 2127 dated 1/2/2024, there was a suggestion in some forums that there was an issue with the jsi_services file, hence ny question on the version number.

John EB

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 23H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

AAProds wrote on 4/9/2024, 6:14 AM

@me_again

Andy,ย "If so maybe Windows is suspending USB in your power settings"

No go, unfortunately. It still does it.

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12

johnebaker wrote on 4/9/2024, 6:54 AM

@AAProds

Hi Al

Is this is a WIFI mouse with USB receiver?

If so, are the mouse batteries good - I have been caught out with this ๐Ÿ˜’

John EB

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 23H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

AAProds wrote on 4/9/2024, 6:59 AM

@johnebaker

John, yes, batts all good, banging and smashing mouse and KB has no effect.

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12

me_again wrote on 4/9/2024, 7:12 AM

@AAProds

Hmm, this is getting a bit like what my dear departed mother used to say "teaching your grandmother to suck eggs" - did people really do that?

Anyway, have you tried this, device manager / mice and other pointing devices / properties?

AndyW

"Just when I think I've learned the workrounds of MEP/MS the bounders go and update it"

Aorus Z690 Elite DDR4 Motherboard

12th Gen Intel(R) Core(TM) i7-12700K, 3600 Mhz, 12 Core(s) 20 Logical Processor(s)

64gb (4x16gb sticks) DDR4 3200Mhz

Intel(R) UHD Graphics 770

Gigabyte GeForce RTX 4060 Eagle OC 8Gb DDR6 DLSS3 Windforce

Corsair RM750 PSU, be quiet! Pure Rock 2 cooling

System drive 500Gb 4.0NVMe M,2 SSD, dedicated video/audio drive 2Tb Gen 4 NVMe SSD,ย 2x 500Gb Local Fixed Disks (Music etc), USB3 expansion drive 5Tb and 2Tb

Audio Onboard ALC1220 Amp-Up, Windows 11 Home updated as and when

Movie Studio 2025 Suite, Photo Manager Deluxe 13

Norton 360

All Drivers updated as they become available.

AAProds wrote on 4/9/2024, 7:20 AM

@me_again

Andy, yep, already ticked.

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12

me_again wrote on 4/9/2024, 7:42 AM

@AAProds

Another thought as you mentioned this waking problem was recent.

I mentioned in a different topic Windows update KB5035853 has given some people a headache for various reasons. Apparently the latest KB5035942 has fixed a lot of these headaches; it cured the problems my wife's laptop had with KB5035853.

AndyW

"Just when I think I've learned the workrounds of MEP/MS the bounders go and update it"

Aorus Z690 Elite DDR4 Motherboard

12th Gen Intel(R) Core(TM) i7-12700K, 3600 Mhz, 12 Core(s) 20 Logical Processor(s)

64gb (4x16gb sticks) DDR4 3200Mhz

Intel(R) UHD Graphics 770

Gigabyte GeForce RTX 4060 Eagle OC 8Gb DDR6 DLSS3 Windforce

Corsair RM750 PSU, be quiet! Pure Rock 2 cooling

System drive 500Gb 4.0NVMe M,2 SSD, dedicated video/audio drive 2Tb Gen 4 NVMe SSD,ย 2x 500Gb Local Fixed Disks (Music etc), USB3 expansion drive 5Tb and 2Tb

Audio Onboard ALC1220 Amp-Up, Windows 11 Home updated as and when

Movie Studio 2025 Suite, Photo Manager Deluxe 13

Norton 360

All Drivers updated as they become available.

CubeAce wrote on 4/9/2024, 7:44 AM

@AAProds @me_again @johnebaker @Can-Dive

Hi everyone.

Does this topic have any bearing on your problems?

Ray.

ย 

Windows 10 Enterprise. Version 22H2 OS build 19045.5011

Direct X 12.1 latest hardware updates for Western Digital hard drives.

Asus ROG STRIX Z390-F Gaming motherboard Rev 1.xx with Supreme FX inboard audio using the S1220A code. Driver No 6.0.8960.1 Bios version 1401

Intel i9900K Coffee Lake 3.6 to 5.1GHz CPU with Intel UHD 630 Graphics .Driver version Graphics Driver 31.0.101.2130 for 7th-10th Gen Intelยฎ with 64GB of 3200MHz Corsair DDR4 ram.

1000 watt EVGA modular power supply.

1 x 250GB Evo 970 NVMe: drive for C: drive backup 1 x 1TB Sabrent NVMe drive for Operating System / Programs only. 1X WD BLACK 1TB internal SATA 7,200rpm hard drives.1 for internal projects, 1 for Library clips/sounds/music/stills./backup of working projects. 1x500GB SSD current project only drive, 2x WD RED 2TB drives for latest footage storage. Total 21TB of 8 external WD drives for backup.

ASUS NVIDIA GeForce RTX 3060 12GB. nVidia Studio driver version 560.81 - 3584xCUDA cores Direct X 12.1. Memory interface 192bit Memory bandwidth 360.05GB/s 12GB of dedicated GDDR6 video memory, shared system memory 16307MB PCi Express x8 Gen3. Two Samsung 27" LED SA350 monitors with 5000000:1 contrast ratios at 60Hz.

Running MMS 2024 Suite v 23.0.1.182 (UDP3) and VPX 14 - v20.0.3.180 (UDP3)

M Audio Axiom AIR Mini MIDI keyboard Ver 5.10.0.3507

VXP 14, MMS 2024 Suite, Vegas Studio 16, Vegas Pro 18, Cubase 4. CS6, NX Studio, Mixcraft 9 Recording Studio. Mixcraft Pro 10 Studio.

Audio System 5 x matched bi-wired 150 watt Tannoy Reveal speakers plus one Tannoy 15" 250 watt sub with 5.1 class A amplifier. Tuned to room with Tannoy audio application.

Ram Acoustic Studio speakers amplified by NAD amplifier.

Rogers LS7 speakers run from Cambridge Audio P50 amplifier

Schrodinger's Backup. "The condition of any backup is unknown until a restore is attempted."

AAProds wrote on 4/9/2024, 8:19 AM

The telling thing, I think, is that when I roll back the Intel driver, the problem goes away. As soon as I reinstall the latest driver, it recurs.

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12

me_again wrote on 4/9/2024, 8:44 AM

"As soon as I reinstall the latest driver, it recurs."

Aah, even to my untrained ear, nose and throat that's a bit of a giveaway ๐Ÿ˜

"Just when I think I've learned the workrounds of MEP/MS the bounders go and update it"

Aorus Z690 Elite DDR4 Motherboard

12th Gen Intel(R) Core(TM) i7-12700K, 3600 Mhz, 12 Core(s) 20 Logical Processor(s)

64gb (4x16gb sticks) DDR4 3200Mhz

Intel(R) UHD Graphics 770

Gigabyte GeForce RTX 4060 Eagle OC 8Gb DDR6 DLSS3 Windforce

Corsair RM750 PSU, be quiet! Pure Rock 2 cooling

System drive 500Gb 4.0NVMe M,2 SSD, dedicated video/audio drive 2Tb Gen 4 NVMe SSD,ย 2x 500Gb Local Fixed Disks (Music etc), USB3 expansion drive 5Tb and 2Tb

Audio Onboard ALC1220 Amp-Up, Windows 11 Home updated as and when

Movie Studio 2025 Suite, Photo Manager Deluxe 13

Norton 360

All Drivers updated as they become available.