• Music Maker

  One answer, on 7/17/2015

  Why can't hear my audio to record and I went to ASIO driver and put Magix Low Latency 2011 in the Magix Music Maker 2015?
  Why can't hear my audio to record and I went to ASIO driver and put Magix Low Latency 2011? I'm using a Samsung C01U Microphone and it sometimes turns off and I'm not sure if it has to do with the Magix Music Maker 2015 and I went to the table of
• Music Maker

  7 answers, most recent on 9/26/2014

  RE: MAgix Music Maker - Recording Two traks at once
  Hi Filipe, Ideally, if PreSonus has an Asio driver that came with it lke the M-Track did, install and use it. If not, download and install Asio4all from the internet. Use it instead of the Magix low latency driver. You should monitor the sound
• Music Maker

  5 answers, most recent on 9/1/2014

  RE: voice recording is not working
  NOTE:is the person who created the original question.  I wanted to respond directly to both of the answers provided thus far, rather than create a new answer, but it wasn't obvious how to do that, so maybe someone can help me with that as
• Samplitude

  4 answers, most recent on 4/2/2014

  RE: music studio2 -error msg - asio
  I tried Magix Low Latency .as my asio driver and in settings I choose M-Audio Fast Track Pro but the error continues.   If you have no more sugestions my I'd rather run a better anti-virus or format my disk.
• Samplitude

  4 answers, most recent on 4/2/2014

  RE: music studio2 -error msg - asio
  Hi You should have the option to select Magix Low Latency . . .  ASIO driver as well as the M-Audio. Try this instead of the M-Audio driver. HTH John
• Music Maker

  One answer, on 3/10/2014

  RE: How can I adjust the latency for real time, recording alive?
  Rafaelcr, If you are in a song (compostion) hit shift + P on the keyboard.  It should bring up this screen Select the Magix Low Latency Driver on the left, and you can adjust the latency on the right slider. Worked for me.  Hope it helps
• Music Maker

  3 answers, most recent on 11/11/2013

  Why am I getting screeching feedback when I switch to ASIO (Magix Low Latency 2011) driver?
   Sorry to repeat the question but wanted to re-do with a more explanatory header.   I am trying to record vocals that aren't out of synce by a fraction with the music.   When I try to use the ASIO option I get a horrible screeching
• Music Maker

  3 answers, most recent on 8/15/2013

  RE: Can I use Vandal in MMM16 as a straight guitar amp.
  Of course you can! THere is a number of effects you can use live! Best is to use asio4all with magix for low latency. I can't get why some people talk about matters they have no knowledge about!! Don't you have anything better to do?
• Samplitude

  One answer, on 7/19/2013

  ASIO4ALL or Magix low latency 2011
  So to be very quick, which one should I chose to get te best low latency performance? I'm using an alesis io2 express. Thanks a lot!
• Music Maker

  4 answers, most recent on 5/15/2013

  Driver issue after successful install and use for a week
  I've been using full version Magix Music Maker 2013 v19.03.47 (on Win7, HP laptop) for about a week with the Magix Low Latency (MLL) 2011 driver and selected in the ASIO driver dropdown of the Audio/midi tab of Program Settings. Tonight, when I
• Samplitude

  One answer, on 5/2/2013

  RE: Samplitude / Independence ASIO driver system
  Hi, If you haven't solved this yet, I will tell you my settings. I understand you have found the Audio System Window. My settings are: Drivern System : ASIO    of 3 choises Vip Buffer: 1689 Test Buffer 8192 HD/Scrub   8192 Buffer
• Music Maker

  7 answers, most recent on 1/28/2013

  RE: Latency?
  Yes, it doesn't matter when I select the drivers. Switching from 'Direct Sound' to 'ASIO with magix low latency 2011' It doesn't matter, the latency is exactly the same between the two. I don't know exactly bow many milleseconds, but it is similar
• Music Maker

  2 answers, most recent on 1/24/2013

  Midi file on track2 and guitar on track1 will not play back together
  I have a HP Satellite Lap - standard AC97 Realtek driver. I plugged my guitar into the microphone input for recording on track1, then I load a backing midi track to track2. I then chose to the Audio/Midi settings and chose the ASIO and used
• Samplitude

  One answer, on 12/20/2012

  Tracks in solo mode sound too quiet (Samplitude MS 2013)
  Hi there, I'd apreciate any help to solve the problem. When I solo a track (it could be any type audio/midi/VSTi/with or wo FX) there is a really significant drop in volume, when I unsolo the track, the volume level is back to normal. I know it
• Samplitude

  4 answers, most recent on 11/15/2012

  RE: How do I even get started?
  Hey George, I remember from when I was using Music Maker, the sound thingy that i would use when i would record was the ASIO Magix Low Latency (i'm not sure if thats what you're referring to). but i've been trying to search for that same
• Music Maker

  2 answers, most recent on 6/23/2012

  RE: Hi I'm new to this program and I just installed it I went to try to record my first session and it gave me this error msg the waveform input device microsoft sound mapper can't record this format can any one help?
  I had the same problem and used the advice offered by nihon94 in a reply to thechrong. Click on Options/System Audio and the Easy Setup dialog box appears. In the Sound Card and Driver section I had the computer's sound card selected. Change this
• Off topic

  4 answers, most recent on 4/30/2012

  RE: MAGIX Music Maker MX Premium : Other track sounds when replaying a section
  That's reassuring.  Thank you. At some early point I read in the documents that I should use an ASIO driver. To my amazement I discovered one on my PC and so switched to that from whatever I'd used before.   So I have  Magix Low Latency
• Music Maker

  4 answers, most recent on 3/25/2012

  RE: What am I doing incorrectly?
  Hi Not using the midi out of the keyboard is the problem.  You need a midi to usb converter for this if you do not have one and it must also be a low latency converter otherwise you will have problems. Also read this  
• Music Maker

  2 answers, most recent on 2/21/2012

  I'm recording vocals while a karaoke track is playing.
  I'm recording vocals while a karaoke track is playing.  There seems to be latency in the recording of the mic even thought I set the audio output to ASIO Magix Low Latency 2011. Is there a way where I can have only the karaoke (music) playing in
• Music Maker

  One answer, on 11/15/2011

  RE: Why do I have a one second lag in sound when using a MIDI controller keyboard?
  Hi Have you tried using the Magix ASIO Low latency drivers?  They are found in File, Settings, Progam Settings, Audio/Midi tab. John
• Samplitude

  2 answers, most recent on 9/24/2011

  RE: Incompatible Sound Card?
  Hi Masonix I have included your reply as it may be useful to others. Check the keyboard makers web site there may be a driver there for the keyboard.  Also try different USB ports sure that the keyboard is not connected to a USB hub with other
• Samplitude

  2 answers, most recent on 9/24/2011

  RE: Incompatible Sound Card?
  Hi How are you connecting your midi keyboard? 1.   Through a MIDI to USB converter ? 2.    USB direct? In both cases ensure you have up to date drivers. In case 1 some converters have a long latency - you require one with a
• Off topic

  One answer, on 4/13/2011

  RE: i used the magix software on two of my computers that use windows and there is a delay when using the keyboard?
  I would recommend using the ASIO driver. Press "Y" on your keyboard to open the program settings. In Music Maker go to "Audio/MIDI". in Music Studio go to "Audio-Setup". Then select ASIO with the option "magix low latency". Now klick on
• Music Maker

  5 answers, most recent on 3/12/2011

  RE: I installed Asio4all and fallowed the pdf instructions but its not working...
  Hi,   Sorry to know your problem is not solved yet.   It could be due to Windows 7 as MMM 16 Premium works on Operating system: Microsoft Windows XP and Vista. I got it and using on Windows vista, I do not know if