la masterizzazione si blocca

bovoadriano ha scritto il 01.08.2016 ore 11:23

dopo aver finito il filmato sono passato alla masterizzazione e al passaggio n°4 mi esce un messaggio di errore qui di seguito mando l'errore mi sapreste indicarmi il perchè grazie
-------------------------- 10/06/2016 07:55:16 --------------------------

10/06/2016 07:55:16.402:   DLLAV32.DLL loaded, all entry points available
10/06/2016 07:55:16.404:   AVSDK MsgCbFunc registered
10/06/2016 07:55:16.405:   AVSDK: StatCbFunc registered
10/06/2016 07:55:16.482:   AVSDK Version 13.0.244
10/06/2016 07:55:16.483:   ------------ Reading Device Info ----------------
10/06/2016 07:55:16.484:   AVSDK: 1 device(s) found
10/06/2016 07:55:16.485:   BurnSupport: 1 device(s) found
10/06/2016 07:55:16.486:   Adapter=0  ID=0  LUN=16   E:hp CDDVDW SU-208FB Revision:HH00
10/06/2016 07:55:16.487:   BurnSupport: 1 record device(s) available
10/06/2016 07:55:16.487:   BurnSupport: E: hp CDDVDW SU-208FB Rev. HH00
10/06/2016 07:55:16.489:   ------------ done ----------------
10/06/2016 08:03:33.906:   ------------ Reading Device Info ----------------
10/06/2016 08:03:33.906:   AVSDK: 1 device(s) found
10/06/2016 08:03:33.907:   BurnSupport: 1 device(s) found
10/06/2016 08:03:33.907:   Adapter=0  ID=0  LUN=16   E:hp CDDVDW SU-208FB Revision:HH00
10/06/2016 08:03:33.908:   BurnSupport: 1 record device(s) available
10/06/2016 08:03:33.908:   BurnSupport: E: hp CDDVDW SU-208FB Rev. HH00
10/06/2016 08:03:33.908:   ------------ done ----------------
10/06/2016 08:03:37.563:   setting no speed limit
10/06/2016 08:03:37.566:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
10/06/2016 08:03:37.597:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
10/06/2016 08:03:37.598:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
10/06/2016 08:03:37.598:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!

-------------------------- 10/06/2016 08:26:48 --------------------------

10/06/2016 08:26:48.282:   DLLAV32.DLL loaded, all entry points available
10/06/2016 08:26:48.287:   AVSDK MsgCbFunc registered
10/06/2016 08:26:48.291:   AVSDK: StatCbFunc registered
10/06/2016 08:26:48.336:   AVSDK Version 13.0.244
10/06/2016 08:26:48.336:   ------------ Reading Device Info ----------------
10/06/2016 08:26:48.337:   AVSDK: 1 device(s) found
10/06/2016 08:26:48.337:   BurnSupport: 1 device(s) found
10/06/2016 08:26:48.338:   Adapter=0  ID=0  LUN=16   E:hp CDDVDW SU-208FB Revision:HH00
10/06/2016 08:26:48.338:   BurnSupport: 1 record device(s) available
10/06/2016 08:26:48.338:   BurnSupport: E: hp CDDVDW SU-208FB Rev. HH00
10/06/2016 08:26:48.339:   ------------ done ----------------
10/06/2016 09:40:12.102:   ------------ Reading Device Info ----------------
10/06/2016 09:40:12.107:   AVSDK: 1 device(s) found
10/06/2016 09:40:12.111:   BurnSupport: 1 device(s) found
10/06/2016 09:40:12.111:   Adapter=0  ID=0  LUN=16   E:hp CDDVDW SU-208FB Revision:HH00
10/06/2016 09:40:12.112:   BurnSupport: 1 record device(s) available
10/06/2016 09:40:12.113:   BurnSupport: E: hp CDDVDW SU-208FB Rev. HH00
10/06/2016 09:40:12.113:   ------------ done ----------------
10/06/2016 09:40:12.399:   setting no speed limit
10/06/2016 09:40:12.401:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!

-------------------------- 12/06/2016 11:17:00 --------------------------

12/06/2016 11:17:00.687:   DLLAV32.DLL loaded, all entry points available
12/06/2016 11:17:00.689:   AVSDK MsgCbFunc registered
12/06/2016 11:17:00.689:   AVSDK: StatCbFunc registered
12/06/2016 11:17:01.178:   AVSDK Version 13.0.244
12/06/2016 11:17:01.178:   ------------ Reading Device Info ----------------
12/06/2016 11:17:01.178:   AVSDK: 1 device(s) found
12/06/2016 11:17:01.179:   BurnSupport: 1 device(s) found
12/06/2016 11:17:01.179:   Adapter=0  ID=0  LUN=16   E:hp CDDVDW SU-208FB Revision:HH00
12/06/2016 11:17:01.180:   BurnSupport: 1 record device(s) available
12/06/2016 11:17:01.180:   BurnSupport: E: hp CDDVDW SU-208FB Rev. HH00
12/06/2016 11:17:01.180:   ------------ done ----------------
12/06/2016 11:17:04.118:   setting no speed limit
12/06/2016 11:17:04.119:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
12/06/2016 11:17:04.145:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
12/06/2016 11:17:04.145:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
12/06/2016 11:17:04.146:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!

-------------------------- 16/06/2016 17:04:05 --------------------------

16/06/2016 17:04:05.392:   DLLAV32.DLL loaded, all entry points available
16/06/2016 17:04:05.465:   AVSDK MsgCbFunc registered
16/06/2016 17:04:05.473:   AVSDK: StatCbFunc registered
16/06/2016 17:04:06.046:   AVSDK Version 13.0.244
16/06/2016 17:04:06.047:   ------------ Reading Device Info ----------------
16/06/2016 17:04:06.056:   AVSDK: 1 device(s) found
16/06/2016 17:04:06.057:   BurnSupport: 1 device(s) found
16/06/2016 17:04:06.058:   Adapter=0  ID=0  LUN=16   E:hp CDDVDW SU-208FB Revision:HH00
16/06/2016 17:04:06.059:   BurnSupport: 1 record device(s) available
16/06/2016 17:04:06.060:   BurnSupport: E: hp CDDVDW SU-208FB Rev. HH00
16/06/2016 17:04:06.060:   ------------ done ----------------
16/06/2016 17:04:06.415:   setting no speed limit
16/06/2016 17:04:06.416:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
16/06/2016 17:04:07.183:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
16/06/2016 17:04:07.199:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
16/06/2016 17:04:07.200:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
16/06/2016 17:05:12.684:   setting no speed limit
16/06/2016 17:05:12.712:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
16/06/2016 17:05:12.713:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
16/06/2016 17:05:12.713:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!

-------------------------- 28/06/2016 11:28:22 --------------------------

28/06/2016 11:28:22.205:   DLLAV32.DLL loaded, all entry points available
28/06/2016 11:28:22.288:   AVSDK MsgCbFunc registered
28/06/2016 11:28:22.289:   AVSDK: StatCbFunc registered
28/06/2016 11:28:22.865:   AVSDK Version 13.0.244
28/06/2016 11:28:22.866:   ------------ Reading Device Info ----------------
28/06/2016 11:28:22.878:   AVSDK: 1 device(s) found
28/06/2016 11:28:22.878:   BurnSupport: 1 device(s) found
28/06/2016 11:28:22.879:   Adapter=0  ID=0  LUN=16   E:hp CDDVDW SU-208FB Revision:HH00
28/06/2016 11:28:22.880:   BurnSupport: 1 record device(s) available
28/06/2016 11:28:22.881:   BurnSupport: E: hp CDDVDW SU-208FB Rev. HH00
28/06/2016 11:28:22.881:   ------------ done ----------------
28/06/2016 11:28:23.185:   setting no speed limit
28/06/2016 11:28:23.187:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
28/06/2016 11:28:23.972:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
28/06/2016 11:28:23.973:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
28/06/2016 11:28:23.975:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
28/06/2016 11:29:07.609:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
28/06/2016 11:29:07.618:    DEVICE ARRIVED
28/06/2016 11:29:34.814:   Open Project: 2016-06-28 -- dvd project 2016-06-28
28/06/2016 11:29:34.815:   VideoMode: PAL   Temp Dir: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\
28/06/2016 11:29:34.815:   dll version 6.0.10.28
28/06/2016 11:29:34.821:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
28/06/2016 11:29:34.822:   EstimateLayerSplitPoint()...
28/06/2016 11:29:34.822:   Splitpunkt 4271833088 auf Disk mit Größe 4440948736
28/06/2016 11:29:34.823:   Title an Stelle 0, Länge 131072, Typ 0
28/06/2016 11:29:34.825:   Title an Stelle 131072, Länge 131072, Typ 0
28/06/2016 11:29:34.826:   Title an Stelle 262144, Länge 4440686592, Typ 1
28/06/2016 11:29:34.826:   Split berechnen...
28/06/2016 11:29:34.827:   Title an Stelle 0, Länge 131072, Typ 0
28/06/2016 11:29:34.828:   Title an Stelle 131072, Länge 131072, Typ 0
28/06/2016 11:29:34.828:   Title an Stelle 262144, Länge 4440686592, Typ 1
28/06/2016 11:29:34.829:   Split in HMOVIE 2e1bfa20, Position in Datei 4271570944
28/06/2016 11:29:34.836:   Step 1 of 5, Codifica film 1...
28/06/2016 11:29:34.842:   Eintragen des Splitpunktes 4271570944 bei ConvertMovie(2e1bfa20)
28/06/2016 12:46:24.495:   Step 1 done
28/06/2016 12:46:24.512:   Step 2 of 5, Codifica menu pellicola...
28/06/2016 12:46:25.166:   Step 2 done
28/06/2016 12:46:25.187:   Step 3 of 5, Codifica menu capitolo 1 ...
28/06/2016 12:46:25.190:   Step 3 done
28/06/2016 12:46:25.222:   ConvertMovie() - encoded file: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-28\VTS_01_1.VOB
28/06/2016 12:46:25.222:   ConvertMovie() - encoded file: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-28\VTS_01_2.VOB
28/06/2016 12:46:25.223:   ConvertMovie() - encoded file: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-28\VTS_01_3.VOB
28/06/2016 12:46:25.224:   ConvertMovie() - encoded file: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-28\VTS_01_4.VOB
28/06/2016 12:46:25.343:   Step 4 of 5, Crea DVD Image ...
28/06/2016 12:47:19.303:   Step 4 done
28/06/2016 12:47:25.329:   Step 5 of 5
28/06/2016 12:47:25.335:   Step 5 done
28/06/2016 12:47:25.342:   requested recorder feature:
28/06/2016 12:47:25.342:    cache size:       16,000000.1 MB
28/06/2016 12:47:25.343:    write speed:      4057,617188.1 KB/s
28/06/2016 12:47:25.343:    book type:        0
28/06/2016 12:47:25.344:    burn over:        no
28/06/2016 12:47:25.345:    simulate:         no
28/06/2016 12:47:25.345:    disc at once:     no
28/06/2016 12:47:25.346:    burn proof:       yes
28/06/2016 12:47:25.346:    format disc:      no
28/06/2016 12:47:25.346:    short leadout:    no
28/06/2016 12:47:25.347:    no defect mgmt:   no
28/06/2016 12:47:25.347:    verify after burn:no
28/06/2016 12:47:25.348:   ------------ OpenRecorderSetOptions Point ----------------
28/06/2016 12:47:25.642:   setting PoINT cache size to 16777216l
28/06/2016 12:47:25.644:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
28/06/2016 12:47:25.645:    Booktype: don't care
28/06/2016 12:47:25.689:   setting write speed to 4155000  bytes/sec
28/06/2016 12:47:25.690:   this equals 3,000000x DVD / 23,554422x CD Speed
28/06/2016 12:47:25.691:   ------------ done: succeeded ----------------
28/06/2016 12:47:25.692:   ------------ CreateAPIProject ----------------
28/06/2016 12:47:25.695:   Step 5 of 5
28/06/2016 12:47:25.701:   creating DVD project in prepfile mode...
28/06/2016 12:47:25.708:   create volume... OK
28/06/2016 12:47:25.709:   verify option OFF
28/06/2016 12:47:25.710:   set project options... OK
28/06/2016 12:47:25.728:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-28\VIDEO_TS.IFO"
28/06/2016 12:47:25.732:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-28\VIDEO_TS.VOB"
28/06/2016 12:47:25.737:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-28\VTS_01_1.VOB"
28/06/2016 12:47:25.742:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-28\VTS_01_2.VOB"
28/06/2016 12:47:25.746:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-28\VTS_01_3.VOB"
28/06/2016 12:47:25.750:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-28\VTS_01_4.VOB"
28/06/2016 12:47:25.754:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-28\VTS_01_0.IFO"
28/06/2016 12:47:25.758:   Step 5 done
28/06/2016 12:47:25.761:   ------------ done ----------------
28/06/2016 12:47:25.761:   Step 5 of 5
28/06/2016 12:47:25.765:   ------------ BurnToDisc ----------------
28/06/2016 12:47:25.769:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
28/06/2016 12:47:25.770:    Booktype: don't care
28/06/2016 12:47:25.770:   setting write speed to 4155000  bytes/sec
28/06/2016 12:47:25.771:   this equals 3,000000x DVD / 23,554422x CD Speed
28/06/2016 12:47:25.772:   mounting volume on device...OK
28/06/2016 12:47:25.772:   Check on previously direct recorded session...OK
28/06/2016 12:47:25.773:   -- Volume mounted --
28/06/2016 12:47:25.773:   -- Recording on "E: hp CDDVDW SU-208FB" --
28/06/2016 12:47:25.774:   -- Medium is "DVD-R" --
28/06/2016 12:47:25.774:   -- Manufacturer "MCC 03RG20" --
28/06/2016 12:47:25.810:   AVSDK Message - INFO: :Recording volume ...
28/06/2016 12:47:25.811:   AVSDK Status - Begin operation Recording 2048016 sectors/frames
28/06/2016 12:47:25.814:   AVSDK Message - INFO: :Recording -> writing data ...
28/06/2016 12:48:03.072:   wrote LeadIn, start DataCopy
28/06/2016 13:04:15.668:   writing leadout and closing disc
28/06/2016 13:04:44.718:   writing leadout and closing disc
28/06/2016 13:04:44.723:   AVSDK Status - End operation Recording 2048016 sectors/frames
28/06/2016 13:04:44.726:   AVSDK Message - INFO: :Recording successfully completed
28/06/2016 13:04:46.780:   ------------ done ----------------
28/06/2016 13:04:46.781:   Step 5 done
28/06/2016 15:18:44.084:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
28/06/2016 15:18:44.087:    DEVICE REMOVAL

-------------------------- 29/06/2016 17:02:34 --------------------------

29/06/2016 17:02:34.934:   DLLAV32.DLL loaded, all entry points available
29/06/2016 17:02:34.996:   AVSDK MsgCbFunc registered
29/06/2016 17:02:34.997:   AVSDK: StatCbFunc registered
29/06/2016 17:02:35.149:   AVSDK Version 13.0.244
29/06/2016 17:02:35.151:   ------------ Reading Device Info ----------------
29/06/2016 17:02:35.158:   AVSDK: 1 device(s) found
29/06/2016 17:02:35.159:   BurnSupport: 1 device(s) found
29/06/2016 17:02:35.159:   Adapter=0  ID=0  LUN=16   E:hp CDDVDW SU-208FB Revision:HH00
29/06/2016 17:02:35.161:   BurnSupport: 1 record device(s) available
29/06/2016 17:02:35.162:   BurnSupport: E: hp CDDVDW SU-208FB Rev. HH00
29/06/2016 17:02:35.163:   ------------ done ----------------
29/06/2016 17:02:35.482:   setting no speed limit
29/06/2016 17:02:35.484:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
29/06/2016 17:02:45.725:   Open Project: 2016-06-29 -- dvd project 2016-06-29
29/06/2016 17:02:45.726:   VideoMode: PAL   Temp Dir: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\
29/06/2016 17:02:45.727:   dll version 6.0.10.28
29/06/2016 17:02:45.732:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
29/06/2016 17:02:45.733:   EstimateLayerSplitPoint()...
29/06/2016 17:02:45.734:   Splitpunkt 4271833088 auf Disk mit Größe 1494220800
29/06/2016 17:02:45.735:   Title an Stelle 0, Länge 131072, Typ 0
29/06/2016 17:02:45.736:   Title an Stelle 131072, Länge 131072, Typ 0
29/06/2016 17:02:45.737:   Title an Stelle 262144, Länge 1493958656, Typ 1
29/06/2016 17:02:45.737:   ... Split möglich nach aktuellem Title, -> Abbruch
29/06/2016 17:02:45.764:   Step 1 of 5, Codifica film 1...
29/06/2016 17:42:30.398:   Step 1 done
29/06/2016 17:42:30.404:   Step 2 of 5, Codifica menu pellicola...
29/06/2016 17:42:30.912:   Step 2 done
29/06/2016 17:42:30.931:   Step 3 of 5, Codifica menu capitolo 1 ...
29/06/2016 17:42:30.935:   Step 3 done
29/06/2016 17:42:30.948:   ConvertMovie() - encoded file: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-29\VTS_01_1.VOB
29/06/2016 17:42:30.949:   ConvertMovie() - encoded file: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-29\VTS_01_2.VOB
29/06/2016 17:42:30.990:   Step 4 of 5, Crea DVD Image ...
29/06/2016 17:42:41.479:   Step 4 done
29/06/2016 17:42:46.717:   Step 5 of 5
29/06/2016 17:42:46.723:   Step 5 done
29/06/2016 17:42:46.730:   requested recorder feature:
29/06/2016 17:42:46.731:    cache size:       16,000000.1 MB
29/06/2016 17:42:46.733:    write speed:      4057,617188.1 KB/s
29/06/2016 17:42:46.734:    book type:        0
29/06/2016 17:42:46.735:    burn over:        no
29/06/2016 17:42:46.736:    simulate:         no
29/06/2016 17:42:46.736:    disc at once:     no
29/06/2016 17:42:46.737:    burn proof:       yes
29/06/2016 17:42:46.737:    format disc:      no
29/06/2016 17:42:46.738:    short leadout:    no
29/06/2016 17:42:46.738:    no defect mgmt:   no
29/06/2016 17:42:46.738:    verify after burn:no
29/06/2016 17:42:46.739:   ------------ OpenRecorderSetOptions Point ----------------
29/06/2016 17:42:46.874:   setting PoINT cache size to 16777216l
29/06/2016 17:42:46.875:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
29/06/2016 17:42:46.876:    Booktype: don't care
29/06/2016 17:42:46.917:   setting write speed to 4155000  bytes/sec
29/06/2016 17:42:46.919:   this equals 3,000000x DVD / 23,554422x CD Speed
29/06/2016 17:42:46.920:   ------------ done: succeeded ----------------
29/06/2016 17:42:46.920:   ------------ CreateAPIProject ----------------
29/06/2016 17:42:46.924:   Step 5 of 5
29/06/2016 17:42:46.929:   creating DVD project in prepfile mode...
29/06/2016 17:42:46.936:   create volume... OK
29/06/2016 17:42:46.937:   verify option OFF
29/06/2016 17:42:46.938:   set project options... OK
29/06/2016 17:42:46.979:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-29\VIDEO_TS.IFO"
29/06/2016 17:42:46.985:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-29\VIDEO_TS.VOB"
29/06/2016 17:42:46.990:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-29\VTS_01_1.VOB"
29/06/2016 17:42:46.995:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-29\VTS_01_2.VOB"
29/06/2016 17:42:47.000:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-29\VTS_01_0.IFO"
29/06/2016 17:42:47.005:   Step 5 done
29/06/2016 17:42:47.007:   ------------ done ----------------
29/06/2016 17:42:47.008:   Step 5 of 5
29/06/2016 17:42:47.012:   ------------ BurnToDisc ----------------
29/06/2016 17:42:47.015:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
29/06/2016 17:42:47.016:    Booktype: don't care
29/06/2016 17:42:47.017:   setting write speed to 4155000  bytes/sec
29/06/2016 17:42:47.017:   this equals 3,000000x DVD / 23,554422x CD Speed
29/06/2016 17:42:47.018:   mounting volume on device...OK
29/06/2016 17:42:47.018:   Check on previously direct recorded session...OK
29/06/2016 17:42:47.019:   -- Volume mounted --
29/06/2016 17:42:47.019:   -- Recording on "E: hp CDDVDW SU-208FB" --
29/06/2016 17:42:47.020:   -- Medium is "DVD-R" --
29/06/2016 17:42:47.020:   -- Manufacturer "MCC 03RG20" --
29/06/2016 17:42:47.107:   AVSDK Message - INFO: :Recording volume ...
29/06/2016 17:42:47.109:   AVSDK Status - Begin operation Recording 689136 sectors/frames
29/06/2016 17:42:47.113:   AVSDK Message - INFO: :Recording -> writing data ...
29/06/2016 17:42:54.447:   wrote LeadIn, start DataCopy
29/06/2016 17:48:55.394:   writing leadout and closing disc
29/06/2016 17:49:19.817:   writing leadout and closing disc
29/06/2016 17:49:19.824:   AVSDK Status - End operation Recording 689136 sectors/frames
29/06/2016 17:49:19.828:   AVSDK Message - INFO: :Recording successfully completed
29/06/2016 17:49:21.085:   ------------ done ----------------
29/06/2016 17:49:21.086:   Step 5 done
29/06/2016 18:15:48.360:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
29/06/2016 18:15:48.361:    DEVICE REMOVAL

-------------------------- 29/06/2016 22:18:21 --------------------------

29/06/2016 22:18:21.229:   DLLAV32.DLL loaded, all entry points available
29/06/2016 22:18:21.324:   AVSDK MsgCbFunc registered
29/06/2016 22:18:21.325:   AVSDK: StatCbFunc registered
29/06/2016 22:18:21.887:   AVSDK Version 13.0.244
29/06/2016 22:18:21.888:   ------------ Reading Device Info ----------------
29/06/2016 22:18:21.896:   AVSDK: 1 device(s) found
29/06/2016 22:18:21.897:   BurnSupport: 1 device(s) found
29/06/2016 22:18:21.898:   Adapter=0  ID=0  LUN=16   E:hp CDDVDW SU-208FB Revision:HH00
29/06/2016 22:18:21.899:   BurnSupport: 1 record device(s) available
29/06/2016 22:18:21.900:   BurnSupport: E: hp CDDVDW SU-208FB Rev. HH00
29/06/2016 22:18:21.901:   ------------ done ----------------
29/06/2016 22:18:22.268:   setting no speed limit
29/06/2016 22:18:22.269:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
29/06/2016 22:18:22.987:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
29/06/2016 22:18:22.988:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
29/06/2016 22:18:22.989:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!

-------------------------- 30/06/2016 08:06:35 --------------------------

30/06/2016 08:06:35.930:   DLLAV32.DLL loaded, all entry points available
30/06/2016 08:06:36.090:   AVSDK MsgCbFunc registered
30/06/2016 08:06:36.091:   AVSDK: StatCbFunc registered
30/06/2016 08:06:36.276:   AVSDK Version 13.0.244
30/06/2016 08:06:36.277:   ------------ Reading Device Info ----------------
30/06/2016 08:06:36.277:   AVSDK: 1 device(s) found
30/06/2016 08:06:36.278:   BurnSupport: 1 device(s) found
30/06/2016 08:06:36.278:   Adapter=0  ID=0  LUN=16   E:hp CDDVDW SU-208FB Revision:HH00
30/06/2016 08:06:36.279:   BurnSupport: 1 record device(s) available
30/06/2016 08:06:36.279:   BurnSupport: E: hp CDDVDW SU-208FB Rev. HH00
30/06/2016 08:06:36.280:   ------------ done ----------------
30/06/2016 08:06:36.631:   setting no speed limit
30/06/2016 08:06:36.633:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
30/06/2016 08:06:58.623:   Open Project: 2016-06-29 -- dvd project 2016-06-30
30/06/2016 08:06:58.624:   VideoMode: PAL   Temp Dir: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\
30/06/2016 08:06:58.624:   dll version 6.0.10.28
30/06/2016 08:06:58.628:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
30/06/2016 08:06:58.628:   EstimateLayerSplitPoint()...
30/06/2016 08:06:58.629:   Splitpunkt 4271833088 auf Disk mit Größe 4449337344
30/06/2016 08:06:58.629:   Title an Stelle 0, Länge 131072, Typ 0
30/06/2016 08:06:58.630:   Title an Stelle 131072, Länge 131072, Typ 0
30/06/2016 08:06:58.630:   Title an Stelle 262144, Länge 4449075200, Typ 1
30/06/2016 08:06:58.631:   Split berechnen...
30/06/2016 08:06:58.631:   Title an Stelle 0, Länge 131072, Typ 0
30/06/2016 08:06:58.631:   Title an Stelle 131072, Länge 131072, Typ 0
30/06/2016 08:06:58.632:   Title an Stelle 262144, Länge 4449075200, Typ 1
30/06/2016 08:06:58.632:   Split in HMOVIE 359ecea0, Position in Datei 4271570944
30/06/2016 08:07:46.710:   ERROR: PrepareDVDVideoFiles() failed with errNo 11 - user cancelled
30/06/2016 08:07:46.711:   !!! DBK error in BurnProject: 1 - user cancelled operation !!!
30/06/2016 08:08:44.076:   Open Project: 2016-06-29 -- dvd project 2016-06-30
30/06/2016 08:08:44.077:   VideoMode: PAL   Temp Dir: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\
30/06/2016 08:08:44.078:   dll version 6.0.10.28
30/06/2016 08:08:44.083:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
30/06/2016 08:08:44.084:   EstimateLayerSplitPoint()...
30/06/2016 08:08:44.085:   Splitpunkt 4271833088 auf Disk mit Größe 4449337344
30/06/2016 08:08:44.086:   Title an Stelle 0, Länge 131072, Typ 0
30/06/2016 08:08:44.087:   Title an Stelle 131072, Länge 131072, Typ 0
30/06/2016 08:08:44.087:   Title an Stelle 262144, Länge 4449075200, Typ 1
30/06/2016 08:08:44.088:   Split berechnen...
30/06/2016 08:08:44.090:   Title an Stelle 0, Länge 131072, Typ 0
30/06/2016 08:08:44.091:   Title an Stelle 131072, Länge 131072, Typ 0
30/06/2016 08:08:44.092:   Title an Stelle 262144, Länge 4449075200, Typ 1
30/06/2016 08:08:44.093:   Split in HMOVIE 359ecea0, Position in Datei 4271570944
30/06/2016 08:08:54.330:   Step 1 of 5, Codifica film 1...
30/06/2016 08:08:54.334:   Eintragen des Splitpunktes 4271570944 bei ConvertMovie(359ecea0)
30/06/2016 08:08:54.336:   Step 1 done
30/06/2016 08:08:54.340:   Step 2 of 5, Codifica menu pellicola...
30/06/2016 08:08:54.896:   Step 2 done
30/06/2016 08:08:54.902:   Step 3 of 5, Codifica menu capitolo 1 ...
30/06/2016 08:08:54.909:   Step 3 done
30/06/2016 08:08:54.925:   ConvertMovie() - encoded file: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-29\VTS_01_1.VOB
30/06/2016 08:08:54.925:   ConvertMovie() - encoded file: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-29\VTS_01_2.VOB
30/06/2016 08:08:54.963:   Step 4 of 5, Crea DVD Image ...
30/06/2016 08:09:11.008:   Step 4 done
30/06/2016 08:09:14.443:   Step 5 of 5
30/06/2016 08:09:14.448:   Step 5 done
30/06/2016 08:09:14.562:   requested recorder feature:
30/06/2016 08:09:14.564:    cache size:       16,000000.1 MB
30/06/2016 08:09:14.565:    write speed:      4057,617188.1 KB/s
30/06/2016 08:09:14.566:    book type:        0
30/06/2016 08:09:14.567:    burn over:        no
30/06/2016 08:09:14.568:    simulate:         no
30/06/2016 08:09:14.569:    disc at once:     no
30/06/2016 08:09:14.569:    burn proof:       yes
30/06/2016 08:09:14.570:    format disc:      no
30/06/2016 08:09:14.571:    short leadout:    no
30/06/2016 08:09:14.572:    no defect mgmt:   no
30/06/2016 08:09:14.572:    verify after burn:no
30/06/2016 08:09:14.573:   ------------ OpenRecorderSetOptions Point ----------------
30/06/2016 08:09:14.732:   setting PoINT cache size to 16777216l
30/06/2016 08:09:14.781:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
30/06/2016 08:09:14.782:    Booktype: don't care
30/06/2016 08:09:14.796:   setting write speed to 4155000  bytes/sec
30/06/2016 08:09:14.797:   this equals 3,000000x DVD / 23,554422x CD Speed
30/06/2016 08:09:14.798:   ------------ done: succeeded ----------------
30/06/2016 08:09:14.799:   ------------ CreateAPIProject ----------------
30/06/2016 08:09:14.803:   Step 5 of 5
30/06/2016 08:09:14.808:   creating DVD project in prepfile mode...
30/06/2016 08:09:14.815:   create volume... OK
30/06/2016 08:09:14.816:   verify option OFF
30/06/2016 08:09:14.816:   set project options... OK
30/06/2016 08:09:14.818:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-29\VIDEO_TS.IFO"
30/06/2016 08:09:14.822:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-29\VIDEO_TS.VOB"
30/06/2016 08:09:14.894:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-29\VTS_01_1.VOB"
30/06/2016 08:09:14.899:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-29\VTS_01_2.VOB"
30/06/2016 08:09:14.903:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-29\VTS_01_0.IFO"
30/06/2016 08:09:14.907:   Step 5 done
30/06/2016 08:09:14.912:   ------------ done ----------------
30/06/2016 08:09:14.913:   Step 5 of 5
30/06/2016 08:09:14.918:   ------------ BurnToDisc ----------------
30/06/2016 08:09:14.998:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
30/06/2016 08:09:14.999:    Booktype: don't care
30/06/2016 08:09:15.000:   setting write speed to 4155000  bytes/sec
30/06/2016 08:09:15.001:   this equals 3,000000x DVD / 23,554422x CD Speed
30/06/2016 08:09:15.001:   mounting volume on device...OK
30/06/2016 08:09:15.002:   Check on previously direct recorded session...OK
30/06/2016 08:09:15.002:   -- Volume mounted --
30/06/2016 08:09:15.003:   -- Recording on "E: hp CDDVDW SU-208FB" --
30/06/2016 08:09:15.004:   -- Medium is "DVD-R" --
30/06/2016 08:09:15.004:   -- Manufacturer "MCC 03RG20" --
30/06/2016 08:09:15.029:   AVSDK Message - INFO: :Recording volume ...
30/06/2016 08:09:15.029:   AVSDK Status - Begin operation Recording 689136 sectors/frames
30/06/2016 08:09:15.032:   AVSDK Message - INFO: :Recording -> writing data ...
30/06/2016 08:09:23.196:   wrote LeadIn, start DataCopy
30/06/2016 08:15:21.105:   writing leadout and closing disc
30/06/2016 08:15:46.561:   writing leadout and closing disc
30/06/2016 08:15:46.574:   AVSDK Status - End operation Recording 689136 sectors/frames
30/06/2016 08:15:46.583:   AVSDK Message - INFO: :Recording successfully completed
30/06/2016 08:15:47.809:   ------------ done ----------------
30/06/2016 08:15:47.810:   Step 5 done
30/06/2016 08:16:29.260:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
30/06/2016 08:16:29.264:    DEVICE REMOVAL

-------------------------- 30/06/2016 11:35:54 --------------------------

30/06/2016 11:35:54.274:   DLLAV32.DLL loaded, all entry points available
30/06/2016 11:35:54.317:   AVSDK MsgCbFunc registered
30/06/2016 11:35:54.318:   AVSDK: StatCbFunc registered
30/06/2016 11:35:54.471:   AVSDK Version 13.0.244
30/06/2016 11:35:54.472:   ------------ Reading Device Info ----------------
30/06/2016 11:35:54.472:   AVSDK: 1 device(s) found
30/06/2016 11:35:54.472:   BurnSupport: 1 device(s) found
30/06/2016 11:35:54.473:   Adapter=0  ID=0  LUN=16   E:hp CDDVDW SU-208FB Revision:HH00
30/06/2016 11:35:54.474:   BurnSupport: 1 record device(s) available
30/06/2016 11:35:54.474:   BurnSupport: E: hp CDDVDW SU-208FB Rev. HH00
30/06/2016 11:35:54.475:   ------------ done ----------------
30/06/2016 11:35:54.801:   setting no speed limit
30/06/2016 11:35:54.803:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
30/06/2016 11:36:06.092:   Open Project: atlantis -- dvd project 2016-06-30
30/06/2016 11:36:06.093:   VideoMode: PAL   Temp Dir: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\
30/06/2016 11:36:06.094:   dll version 6.0.10.28
30/06/2016 11:36:06.100:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
30/06/2016 11:36:06.100:   EstimateLayerSplitPoint()...
30/06/2016 11:36:06.101:   Splitpunkt 4271833088 auf Disk mit Größe 4449337344
30/06/2016 11:36:06.102:   Title an Stelle 0, Länge 131072, Typ 0
30/06/2016 11:36:06.103:   Title an Stelle 131072, Länge 131072, Typ 0
30/06/2016 11:36:06.104:   Title an Stelle 262144, Länge 4449075200, Typ 1
30/06/2016 11:36:06.104:   Split berechnen...
30/06/2016 11:36:06.105:   Title an Stelle 0, Länge 131072, Typ 0
30/06/2016 11:36:06.106:   Title an Stelle 131072, Länge 131072, Typ 0
30/06/2016 11:36:06.106:   Title an Stelle 262144, Länge 4449075200, Typ 1
30/06/2016 11:36:06.107:   Split in HMOVIE 1eebc140, Position in Datei 4271570944
30/06/2016 11:36:06.114:   Step 1 of 5, Codifica film 1...
30/06/2016 11:36:06.118:   Eintragen des Splitpunktes 4271570944 bei ConvertMovie(1eebc140)
30/06/2016 12:36:22.715:   Step 1 done
30/06/2016 12:36:22.733:   Step 2 of 5, Codifica menu pellicola...
30/06/2016 12:36:23.275:   Step 2 done
30/06/2016 12:36:23.294:   Step 3 of 5, Codifica menu capitolo 1 ...
30/06/2016 12:36:23.298:   Step 3 done
30/06/2016 12:36:23.325:   ConvertMovie() - encoded file: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image atlantis\VTS_01_1.VOB
30/06/2016 12:36:23.326:   ConvertMovie() - encoded file: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image atlantis\VTS_01_2.VOB
30/06/2016 12:36:23.326:   ConvertMovie() - encoded file: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image atlantis\VTS_01_3.VOB
30/06/2016 12:36:23.327:   ConvertMovie() - encoded file: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image atlantis\VTS_01_4.VOB
30/06/2016 12:36:23.462:   Step 4 of 5, Crea DVD Image ...
30/06/2016 12:37:13.823:   Step 4 done
30/06/2016 12:37:19.797:   Step 5 of 5
30/06/2016 12:37:19.802:   Step 5 done
30/06/2016 12:37:20.176:   requested recorder feature:
30/06/2016 12:37:20.177:    cache size:       16,000000.1 MB
30/06/2016 12:37:20.178:    write speed:      4057,617188.1 KB/s
30/06/2016 12:37:20.178:    book type:        0
30/06/2016 12:37:20.179:    burn over:        no
30/06/2016 12:37:20.180:    simulate:         no
30/06/2016 12:37:20.180:    disc at once:     no
30/06/2016 12:37:20.181:    burn proof:       yes
30/06/2016 12:37:20.182:    format disc:      no
30/06/2016 12:37:20.182:    short leadout:    no
30/06/2016 12:37:20.183:    no defect mgmt:   no
30/06/2016 12:37:20.184:    verify after burn:no
30/06/2016 12:37:20.184:   ------------ OpenRecorderSetOptions Point ----------------
30/06/2016 12:37:20.387:   setting PoINT cache size to 16777216l
30/06/2016 12:37:20.436:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
30/06/2016 12:37:20.437:    Booktype: don't care
30/06/2016 12:37:20.510:   setting write speed to 4155000  bytes/sec
30/06/2016 12:37:20.511:   this equals 3,000000x DVD / 23,554422x CD Speed
30/06/2016 12:37:20.512:   ------------ done: succeeded ----------------
30/06/2016 12:37:20.513:   ------------ CreateAPIProject ----------------
30/06/2016 12:37:20.516:   Step 5 of 5
30/06/2016 12:37:20.519:   creating DVD project in prepfile mode...
30/06/2016 12:37:20.521:   create volume... OK
30/06/2016 12:37:20.522:   verify option OFF
30/06/2016 12:37:20.522:   set project options... OK
30/06/2016 12:37:20.614:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image atlantis\VIDEO_TS.IFO"
30/06/2016 12:37:20.619:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image atlantis\VIDEO_TS.VOB"
30/06/2016 12:37:20.625:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image atlantis\VTS_01_1.VOB"
30/06/2016 12:37:20.629:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image atlantis\VTS_01_2.VOB"
30/06/2016 12:37:20.633:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image atlantis\VTS_01_3.VOB"
30/06/2016 12:37:20.660:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image atlantis\VTS_01_4.VOB"
30/06/2016 12:37:20.662:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image atlantis\VTS_01_0.IFO"
30/06/2016 12:37:20.664:   Step 5 done
30/06/2016 12:37:20.666:   ------------ done ----------------
30/06/2016 12:37:20.666:   Step 5 of 5
30/06/2016 12:37:20.668:   ------------ BurnToDisc ----------------
30/06/2016 12:37:20.765:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
30/06/2016 12:37:20.766:    Booktype: don't care
30/06/2016 12:37:20.768:   setting write speed to 4155000  bytes/sec
30/06/2016 12:37:20.768:   this equals 3,000000x DVD / 23,554422x CD Speed
30/06/2016 12:37:20.770:   mounting volume on device...OK
30/06/2016 12:37:20.770:   Check on previously direct recorded session...OK
30/06/2016 12:37:20.771:   -- Volume mounted --
30/06/2016 12:37:20.772:   -- Recording on "E: hp CDDVDW SU-208FB" --
30/06/2016 12:37:20.773:   -- Medium is "DVD-R" --
30/06/2016 12:37:20.774:   -- Manufacturer "MCC 03RG20" --
30/06/2016 12:37:21.494:   AVSDK Message - INFO: :Recording volume ...
30/06/2016 12:37:21.496:   AVSDK Status - Begin operation Recording 2052032 sectors/frames
30/06/2016 12:37:21.501:   AVSDK Message - INFO: :Recording -> writing data ...
30/06/2016 12:37:59.480:   wrote LeadIn, start DataCopy
30/06/2016 12:54:12.909:   writing leadout and closing disc
30/06/2016 12:54:41.985:   writing leadout and closing disc
30/06/2016 12:54:41.990:   AVSDK Status - End operation Recording 2052032 sectors/frames
30/06/2016 12:54:41.994:   AVSDK Message - INFO: :Recording successfully completed
30/06/2016 12:54:43.950:   ------------ done ----------------
30/06/2016 12:54:43.953:   Step 5 done

-------------------------- 30/06/2016 16:20:41 --------------------------

30/06/2016 16:20:41.413:   DLLAV32.DLL loaded, all entry points available
30/06/2016 16:20:41.415:   AVSDK MsgCbFunc registered
30/06/2016 16:20:41.415:   AVSDK: StatCbFunc registered
30/06/2016 16:20:41.523:   AVSDK Version 13.0.244
30/06/2016 16:20:41.524:   ------------ Reading Device Info ----------------
30/06/2016 16:20:41.525:   AVSDK: 1 device(s) found
30/06/2016 16:20:41.526:   BurnSupport: 1 device(s) found
30/06/2016 16:20:41.527:   Adapter=0  ID=0  LUN=16   E:hp CDDVDW SU-208FB Revision:HH00
30/06/2016 16:20:41.528:   BurnSupport: 1 record device(s) available
30/06/2016 16:20:41.529:   BurnSupport: E: hp CDDVDW SU-208FB Rev. HH00
30/06/2016 16:20:41.529:   ------------ done ----------------
30/06/2016 16:20:41.530:   setting no speed limit
30/06/2016 16:20:46.189:   !!! DBK error in CBurnDevSupport::CheckSpeedLimit(): 20 - no disc !!!
30/06/2016 16:20:46.190:   !!! DBK error in CBurnDevSupport::CheckSpeedLimit(): 20 - no disc !!!
30/06/2016 16:20:46.190:   !!! DBK error in CBurnDevSupport::CheckSpeedLimit(): 20 - no disc !!!
30/06/2016 16:20:46.190:   !!! DBK error in CBurnDevSupport::CheckSpeedLimit(): 20 - no disc !!!
30/06/2016 16:20:46.195:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
30/06/2016 16:20:48.976:   Open Project: 2016-06-30 -- dvd project 2016-06-30
30/06/2016 16:20:48.977:   VideoMode: PAL   Temp Dir: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\
30/06/2016 16:20:48.978:   dll version 6.0.10.28
30/06/2016 16:20:48.984:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
30/06/2016 16:20:48.985:   EstimateLayerSplitPoint()...
30/06/2016 16:20:48.985:   Splitpunkt 4271833088 auf Disk mit Größe 0
30/06/2016 16:20:48.986:   Title an Stelle 0, Länge 0, Typ 1
30/06/2016 16:20:48.987:   ... Split möglich nach aktuellem Title, -> Abbruch
30/06/2016 16:20:48.991:   Step 1 of 4, Registrazione diretta su disco...
30/06/2016 16:20:49.185:   Check on previously direct recorded session...OK
30/06/2016 16:20:49.319:   RecordInfo at beginning of direct record session:
30/06/2016 16:20:49.320:    avFileType   : 10102
30/06/2016 16:20:49.320:    FileDirty    : not dirty
30/06/2016 16:20:49.321:    BlockSize    : 2048
30/06/2016 16:20:49.321:    BlockAddress : 6ca0 (27808)
30/06/2016 16:20:49.322:    UsedBlocks   : 0 (0)
30/06/2016 16:20:49.322:    FreeBlocks   : 223f50 (2244432)
30/06/2016 17:35:02.900:   RecordInfo at end of direct record session:
30/06/2016 17:35:02.901:    avFileType   : 10102
30/06/2016 17:35:02.902:    FileDirty    : not dirty
30/06/2016 17:35:02.903:    BlockSize    : 2048
30/06/2016 17:35:02.904:    BlockAddress : 6ca0 (27808)
30/06/2016 17:35:02.905:    UsedBlocks   : 13dfd9 (1302489)
30/06/2016 17:35:02.906:    FreeBlocks   : e5f77 (941943)
30/06/2016 17:35:02.907:  
END DIRECT RECORDING, used blocks 1302489
30/06/2016 17:35:02.907:   END DIRECT RECORDING, free blocks 941943

30/06/2016 17:35:11.291:   Step 1 done
30/06/2016 17:35:11.300:   Step 2 of 4, Codifica film 1...
30/06/2016 17:35:11.307:   Step 2 done
30/06/2016 17:35:11.349:   Step 3 of 4, Crea DVD Image ...
30/06/2016 17:35:11.411:   Step 3 done
30/06/2016 17:35:17.274:   Step 4 of 4
30/06/2016 17:35:17.279:   Step 4 done
30/06/2016 17:35:17.284:   requested recorder feature:
30/06/2016 17:35:17.284:    cache size:       16,000000.1 MB
30/06/2016 17:35:17.284:    write speed:      4057,617188.1 KB/s
30/06/2016 17:35:17.285:    book type:        0
30/06/2016 17:35:17.285:    burn over:        no
30/06/2016 17:35:17.286:    simulate:         no
30/06/2016 17:35:17.286:    disc at once:     no
30/06/2016 17:35:17.286:    burn proof:       yes
30/06/2016 17:35:17.287:    format disc:      no
30/06/2016 17:35:17.287:    short leadout:    yes
30/06/2016 17:35:17.287:    no defect mgmt:   no
30/06/2016 17:35:17.288:    verify after burn:no
30/06/2016 17:35:17.288:   ------------ OpenRecorderSetOptions Point ----------------
30/06/2016 17:35:18.167:   setting PoINT cache size to 16777216l
30/06/2016 17:35:18.168:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: on
NoDefectMgmt: off
30/06/2016 17:35:18.168:    Booktype: don't care
30/06/2016 17:35:18.174:   setting write speed to 4155000  bytes/sec
30/06/2016 17:35:18.176:   this equals 3,000000x DVD / 23,554422x CD Speed
30/06/2016 17:35:18.177:   ------------ done: succeeded ----------------
30/06/2016 17:35:18.178:   ------------ CreateAPIProject ----------------
30/06/2016 17:35:18.181:   Step 4 of 4
30/06/2016 17:35:18.184:   creating DVD project in prepfile mode...
30/06/2016 17:35:18.190:   create volume... OK
30/06/2016 17:35:18.191:   verify option OFF
30/06/2016 17:35:18.192:   set project options... OK
30/06/2016 17:35:18.486:   mounting volume on device...OK
30/06/2016 17:35:18.487:   recorded session found on inserted disc:
30/06/2016 17:35:18.488:    avFileType   : 10102
30/06/2016 17:35:18.489:    FileDirty    : not dirty
30/06/2016 17:35:18.490:    BlockSize    : 2048
30/06/2016 17:35:18.491:    BlockAddress : 6ca0 (27808)
30/06/2016 17:35:18.491:    UsedBlocks   : 13dfd9 (1302489)
30/06/2016 17:35:18.492:    FreeBlocks   : 0 (0)
30/06/2016 17:35:18.493:   recorded session recovered
30/06/2016 17:35:18.494:   adding file ""
30/06/2016 17:35:18.499:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-30\VIDEO_TS.IFO"
30/06/2016 17:35:18.511:   adding file "C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\DVD Image 2016-06-30\VTS_01_0.IFO"
30/06/2016 17:35:18.513:   Step 4 done
30/06/2016 17:35:18.514:   ------------ done ----------------
30/06/2016 17:35:18.515:   Step 4 of 4
30/06/2016 17:35:18.517:   ------------ BurnToDisc ----------------
30/06/2016 17:35:18.519:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: on
NoDefectMgmt: off
30/06/2016 17:35:18.520:    Booktype: don't care
30/06/2016 17:35:18.520:   setting write speed to 4155000  bytes/sec
30/06/2016 17:35:18.520:   this equals 3,000000x DVD / 23,554422x CD Speed
30/06/2016 17:35:18.521:   -- Volume mounted --
30/06/2016 17:35:18.521:   -- Recording on "E: hp CDDVDW SU-208FB" --
30/06/2016 17:35:18.522:   -- Medium is "DVD-R" --
30/06/2016 17:35:18.522:   -- Manufacturer "MCC 03RG20" --
30/06/2016 17:35:18.692:   AVSDK Message - INFO: :Recording volume ...
30/06/2016 17:35:18.693:   AVSDK Status - Begin operation Recording 1330368 sectors/frames
30/06/2016 17:35:18.698:   AVSDK Message - INFO: :Recording -> writing data ...
30/06/2016 17:35:18.716:   wrote LeadIn, start DataCopy
30/06/2016 17:35:48.737:   writing leadout and closing disc
30/06/2016 17:36:01.074:   writing leadout and closing disc
30/06/2016 17:36:01.087:   AVSDK Message - INFO: :Recording -> finalising disc ...
30/06/2016 17:37:01.852:   AVSDK Status - End operation Recording 1330368 sectors/frames
30/06/2016 17:37:01.860:   AVSDK Message - INFO: :Recording successfully completed
30/06/2016 17:37:06.671:   ------------ done ----------------
30/06/2016 17:37:06.675:   Step 4 done
30/06/2016 17:43:57.669:   setting no speed limit
30/06/2016 17:44:02.763:   Open Project: 2016-06-30 -- dvd project 2016-06-30
30/06/2016 17:44:02.764:   VideoMode: PAL   Temp Dir: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\
30/06/2016 17:44:02.764:   dll version 6.0.10.28
30/06/2016 17:44:02.770:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
30/06/2016 17:44:02.771:   EstimateLayerSplitPoint()...
30/06/2016 17:44:02.771:   Splitpunkt 4271833088 auf Disk mit Größe 0
30/06/2016 17:44:02.772:   Title an Stelle 0, Länge 0, Typ 1
30/06/2016 17:44:02.773:   ... Split möglich nach aktuellem Title, -> Abbruch
30/06/2016 17:44:02.777:   Step 1 of 4, Registrazione diretta su disco...
30/06/2016 17:44:02.931:   Check on previously direct recorded session...OK
30/06/2016 17:44:03.048:   RecordInfo at beginning of direct record session:
30/06/2016 17:44:03.049:    avFileType   : 10102
30/06/2016 17:44:03.050:    FileDirty    : not dirty
30/06/2016 17:44:03.050:    BlockSize    : 2048
30/06/2016 17:44:03.051:    BlockAddress : 6ca0 (27808)
30/06/2016 17:44:03.052:    UsedBlocks   : 0 (0)
30/06/2016 17:44:03.053:    FreeBlocks   : 223f50 (2244432)
30/06/2016 17:53:45.648:   AVSDK Message - ERROR: :Cannot write packet to disc -> Medium not present (SK/ASC/ASCQ 02/3A/02)

-------------------------- 30/06/2016 17:55:23 --------------------------

30/06/2016 17:55:23.968:   DLLAV32.DLL loaded, all entry points available
30/06/2016 17:55:23.970:   AVSDK MsgCbFunc registered
30/06/2016 17:55:23.971:   AVSDK: StatCbFunc registered
30/06/2016 17:55:24.012:   AVSDK Version 13.0.244
30/06/2016 17:55:24.012:   ------------ Reading Device Info ----------------
30/06/2016 17:55:24.013:   AVSDK: 1 device(s) found
30/06/2016 17:55:24.013:   BurnSupport: 1 device(s) found
30/06/2016 17:55:24.014:   Adapter=0  ID=0  LUN=16   E:hp CDDVDW SU-208FB Revision:HH00
30/06/2016 17:55:24.015:   BurnSupport: 1 record device(s) available
30/06/2016 17:55:24.015:   BurnSupport: E: hp CDDVDW SU-208FB Rev. HH00
30/06/2016 17:55:24.015:   ------------ done ----------------
30/06/2016 17:55:24.016:   setting no speed limit
30/06/2016 17:55:24.075:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/02)
30/06/2016 17:55:24.076:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
30/06/2016 17:55:24.076:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
30/06/2016 17:55:24.079:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
30/06/2016 17:55:24.294:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/02)
30/06/2016 17:55:24.295:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
30/06/2016 17:55:24.296:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
30/06/2016 17:55:24.569:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/02)
30/06/2016 17:55:24.570:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
30/06/2016 17:55:24.570:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!

-------------------------- 30/06/2016 17:58:28 --------------------------

30/06/2016 17:58:28.148:   DLLAV32.DLL loaded, all entry points available
30/06/2016 17:58:28.154:   AVSDK MsgCbFunc registered
30/06/2016 17:58:28.157:   AVSDK: StatCbFunc registered
30/06/2016 17:58:45.487:   AVSDK Version 13.0.244
30/06/2016 17:58:45.495:   ------------ Reading Device Info ----------------
30/06/2016 17:58:45.503:   AVSDK: 1 device(s) found
30/06/2016 17:58:45.504:   BurnSupport: 1 device(s) found
30/06/2016 17:58:45.505:   Adapter=0  ID=0  LUN=16   E:hp CDDVDW SU-208FB Revision:HH00
30/06/2016 17:58:45.506:   BurnSupport: 1 record device(s) available
30/06/2016 17:58:45.507:   BurnSupport: E: hp CDDVDW SU-208FB Rev. HH00
30/06/2016 17:58:45.508:   ------------ done ----------------
30/06/2016 17:58:45.509:   setting no speed limit
30/06/2016 17:59:04.146:   !!! DBK error in CBurnDevSupport::CheckSpeedLimit(): 20 - no disc !!!
30/06/2016 17:59:04.146:   !!! DBK error in CBurnDevSupport::CheckSpeedLimit(): 20 - no disc !!!
30/06/2016 17:59:04.147:   !!! DBK error in CBurnDevSupport::CheckSpeedLimit(): 20 - no disc !!!
30/06/2016 17:59:04.148:   !!! DBK error in CBurnDevSupport::CheckSpeedLimit(): 20 - no disc !!!
30/06/2016 17:59:04.158:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
30/06/2016 18:01:13.135:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
30/06/2016 18:01:13.136:    DEVICE REMOVAL
30/06/2016 18:02:30.625:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
30/06/2016 18:02:30.634:    DEVICE REMOVAL
30/06/2016 18:02:55.126:   Open Project: 2016-06-30 -- dvd project 2016-06-30
30/06/2016 18:02:55.127:   VideoMode: PAL   Temp Dir: C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\
30/06/2016 18:02:55.127:   dll version 6.0.10.28
30/06/2016 18:02:55.133:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
30/06/2016 18:02:55.133:   EstimateLayerSplitPoint()...
30/06/2016 18:02:55.134:   Splitpunkt 4271833088 auf Disk mit Größe 0
30/06/2016 18:02:55.135:   Title an Stelle 0, Länge 0, Typ 1
30/06/2016 18:02:55.136:   ... Split möglich nach aktuellem Title, -> Abbruch
30/06/2016 18:02:55.137:   Step 1 of 4, Registrazione diretta su disco...
30/06/2016 18:02:55.241:   Check on previously direct recorded session...OK
30/06/2016 18:03:05.285:   AVSDK Status - Begin operation Formatting disc
30/06/2016 18:03:26.656:   AVSDK Status - End operation Formatting disc
30/06/2016 18:03:29.311:   RecordInfo at beginning of direct record session:
30/06/2016 18:03:29.321:    avFileType   : 10102
30/06/2016 18:03:29.328:    FileDirty    : not dirty
30/06/2016 18:03:29.337:    BlockSize    : 2048
30

Commenti

Vecchio utente ha scritto il 01.08.2016 ore 18:00

Cancella l'immagine disco creata dal programma, che si trova in Documenti esattamente su:
C:\Users\adriano\Documents\MAGIX\Video deluxe 2016 Plus\Disc Images\
Una volta cancellato prova nuovamente a masterizzare con un nome del file diverso, però invece di utilizzare il nome del masterizzatore seleziona "Image recorder" e vedi se tutto va a buon fine. Se è tutto positivo il problema potrebbe essere il DVD disco magari difettoso, o magari stai utilizzando un DVD RW già molte volte utilizzato, quindi da sostituire.
1) Ora da Video Deluxe vai nel menù File, poi seleziona Masterizza CD/DVD, di seguito scegli Massterizza copia di disco già creata, se non è già in lista cerchi il file *.iso che si trova sempre nello stesso percorso dove lo avevi cancellato e lo metti in lista, prendi un DVD nuovo e comincia con la masterizzazione.
Per future masterizzazioni devi procedere come descritto nel punto (1)
Ricorda di tenere sempre aggiornato Video Deluxe

bovoadriano ha scritto il 01.08.2016 ore 18:25

grazie

ma per tutti i filmati futuri o solo in casi particolari

 

Vecchio utente ha scritto il 01.08.2016 ore 19:29

La masterizzazione di un progetto la fai solo una volta, se non trovi difficoltà nella prima masterizzazione e scrittura del DVD, puoi attendere che faccia tutto il programma, nel caso devi fare una copia del disco, non c'è più bisogno di attendere ore per la codifica, perchè hai l'immagine disco già creata nel Pc, per tanto devi solo fare come specificato al punto 1, in modo che le copie dei dischi DVD ci impiegano dai 10 a 20 minuti per essere scritti.
Io personalmente mi creo sempre un'immagine disco, poi non necessariamente faccio fare subito la scrittura al DVD, quindi utilizzo sempre "Image Recorder" oppure "Codifica nella Directory"

bovoadriano ha scritto il 01.08.2016 ore 19:57

grazie per tutto il disturbo alla prossima

bovoadriano ha scritto il 08.08.2016 ore 08:06

buon giorno

prima di iniziare chiedo scusa per la mia ignoranza

perche le date dell'errore della masterizzazione che io ho fatto in agosto in realta sono di un mese prima come descritto nella pagina di errore che ho mandato

vuol dire che l'errore e qualche drivers che non si è aggiornato e se è cosi come posso fare

faccio questa domanda perchè ho gia fatto  tre filmati e nessuno è e andato a buon fine, ho dovuto masterizzarlo come descritto nella vostra risposta il che non mi sembra giusto almeno per me

Vecchio utente ha scritto il 08.08.2016 ore 09:37

1 Che sistema operativo hai?
2 Sei passato a windows 10 tramite l'upgrade da un sistema operativo precedente come win 7 o 8?
3 Che versione hai di Video Deluxe, metti il nome completo.
4 lascia le specifiche tecniche del tuo Pc
5 quanti anni ha il tuo masterizzatore?

bovoadriano ha scritto il 08.08.2016 ore 11:28

il sistema che uso è

windows10 in upgrade da w8.1

processore AMD a10-5745M APU with Radeon(tm) hd

sistema operativo a 64 bit processore basato su x64

mentre il programma è video delux2016 plus

il computer ha quasi 2 anni penso che non sia vecchio

Vecchio utente ha scritto il 08.08.2016 ore 15:16

No il computer non è vecchio, il problema potrebbe essere che tu abbia installato Video Deluxe quando avevi ancora Windows 8.1, e facendo upgrade a win 10, rimangono problemi di driver, soprattutto nel settore della masterizzazione.
Soluzione: Reinstallare Video Deluxe.
_______________________________
Se Video Deluxe è stato installato direttamente su Windows 10, probabilmente c'è qualche driver di win 10 che non è stato ancora aggiornato, ma qui ti devi arrangiare da solo e capire quale sia il problema dei driver d'aggiornare.
Soluzione: Fare l'installazione pulita di Windows 10, (significa formattare il disco rigido e rifare tutto da capo installando Windows 10) fare gli aggiornamenti forzati di tutto l'hardware del Pc, oppure attendere gli aggiornamenti periodici della Microsoft (Tempi più lunghi) e poi installare nuovamente tutto quello che hai nel Pc..
Se non sei pratico fallo fare a uno che se ne intenda.