Comments

johnebaker wrote on 8/29/2024, 11:39 AM

@allaa-Azawi

Hi

Assuming this is a new install downloaded from Xara then you need to post in the Xara community forum Talk Graphics, here.

Magix no longer offers or supports the software.

John EB
Forum Moderator

Last changed by johnebaker on 8/29/2024, 11:40 AM, changed a total of 2 times.

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 23H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

allaa-Azawi wrote on 8/29/2024, 1:46 PM

Hi Johnebaker

thanks for your reply .

How can i use 3D animtions in Movie Studio Suite 2025 , is there any program that i can use .

thanks again

johnebaker wrote on 8/29/2024, 2:21 PM

@allaa-Azawi

Hi

In my previous comment, I assumed you were referring to the stand-alone 3D title editor downloaded from Xara.

Installing MMS 2025 installs a 'built-in' 3D title editor, if the installation for the 'built-in' editor is the one you were referring to then there should have been an error message dialogue giving you more information on what the issue is.

Are you getting an error message when adding a 3D title to the timeline, if so what is the full message?

Assuming not, then when you add a 3D title from the templates 3D title section, you should get a message box telling you can edit the title in the editor, which loads after closing the message. The editor interface is shown below.

Once you have a 3D title on the timeline, double-clicking it also opens the above editor.

John EB

Last changed by johnebaker on 8/30/2024, 1:05 AM, changed a total of 1 times.

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 23H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

Bol wrote on 9/1/2024, 11:26 AM

@allaa-Azawi

Hi,

MMS2025 does not have a built-in 3D title editor as @johnebaker suggests. You can call up 3D title templates via Templates and place them on the timeline. By double-clicking the template you can edit the text and place it back on the timeline.

The Text - Magix 3D Maker menu is present in the Magix Pro X versions

Good luck,
Rob

Updated: September 1, 2024 at 6:35 PM

See the Dutch video

Last changed by Bol on 9/1/2024, 11:36 AM, changed a total of 2 times.

Als een kwestie onoplosbaar lijkt, komt dat niet omdat je de oplossing niet ziet, maar omdat je het probleem niet ziet.

If an issue seems unsolvable, it is not because you do not see the solution, but because you do not see the problem.

PC -1-

PC -2-

johnebaker wrote on 9/1/2024, 3:10 PM

@Bol

Hi Rob

. . . . MMS2025 does not have a built-in 3D title editor as @johnebaker suggests . . . .

Perhaps I should have said 'embedded' rather than 'built in' 😳

John EB

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 23H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

browj2 wrote on 9/1/2024, 4:04 PM

@johnebaker

Hi John EB,

As Rob has pointed out, the 3D title editor doesn't open in MMS, only in VPX, unless you happen to have installed Xara 3D Maker. I have, so when I add a 3D title in MMS, the 3D title editor opens.

This is why @allaa-Azawi would like to have Xara 3D Maker installed, I presume.

So, the problem is still getting Xara 3D Maker installed and operating on W11. Can it be installed on W11?

John CB

John C.B.

VideoPro X(16); Movie Studio 2024 Platinum; MM2025 Premium Edition; Samplitude Pro X8 Suite; see About me for more.

Desktop System - Windows 10 Pro 22H2; MB ROG STRIX B560-A Gaming WiFi; Graphics Card Zotac Gaming NVIDIA GeForce RTX-3060, PS; Power supply EVGA 750W; Intel Core i7-10700K @ 3.80GHz (UHD Graphics 630); RAM 32 GB; OS on Kingston SSD 1TB; secondary WD 2TB; others 1.5TB, 3TB, 500GB, 4TB, 5TB, 6TB, 8TB; three monitors - HP 25" main, LG 4K 27" second, HP 27" third; Casio WK-225 piano keyboard; M-Audio M-Track USB mixer.

Notebook - Microsoft Surface Pro 4, i5-6300U, 8 GB RAM, 256 SSD, W10 Pro 20H2.

YouTube Channel: @JCBrownVideos

johnebaker wrote on 9/2/2024, 3:07 AM

@allaa-Azawi, @Bol, @browj2

Hi

. . . . the 3D title editor doesn't open in MMS, only in VPX, unless you happen to have installed Xara 3D Maker. . . . the problem is still getting Xara 3D Maker installed and operating on W11. Can it be installed on W11?. . . .

My bad (?), my laptop behaves as Bol described it has never had Xara 3D maker installed, however I rechecked my PC to find I do have an expired trial of Xara 3D Maker installed on my PC Windows 11 23H2, just never removed it.

John EB

Last changed by johnebaker on 9/2/2024, 3:15 AM, changed a total of 2 times.

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 23H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

Bol wrote on 9/2/2024, 4:25 AM

@allaa-Azawi, @johnebaker, @browj2,

Hi,

@johnebaker (John). The 3D Maker 7 is indeed an embedded version and not a built-in version.

It is exactly what John CB describes. As far as I can tell, @allaa-Azawi wants to reinstall Xara 3D maker 7 on a Windows 11 computer. I just tried to install the downloaded Xara 3D maker 7 (trail version). The installation was aborted.

It seems that Magix and Xara no longer sell/support it. @allaa-Azawi should check with Xara about this.

Best wishes,
Rob

Last changed by Bol on 9/2/2024, 4:26 AM, changed a total of 1 times.

Als een kwestie onoplosbaar lijkt, komt dat niet omdat je de oplossing niet ziet, maar omdat je het probleem niet ziet.

If an issue seems unsolvable, it is not because you do not see the solution, but because you do not see the problem.

PC -1-

PC -2-

CubeAce wrote on 9/2/2024, 6:09 AM

@allaa-Azawi @johnebaker @Bol @browj2

Is it not interesting that on the Xara Website Xara 3D maker does not list Window 11 in its system requirements? Whereas other Xara products do not mention compatibility with any Windows versions at all as far as I can find.

Ray.

 

Windows 10 Enterprise. Version 22H2 OS build 19045.5011

Direct X 12.1 latest hardware updates for Western Digital hard drives.

Asus ROG STRIX Z390-F Gaming motherboard Rev 1.xx with Supreme FX inboard audio using the S1220A code. Driver No 6.0.8960.1 Bios version 1401

Intel i9900K Coffee Lake 3.6 to 5.1GHz CPU with Intel UHD 630 Graphics .Driver version Graphics Driver 31.0.101.2130 for 7th-10th Gen Intel® with 64GB of 3200MHz Corsair DDR4 ram.

1000 watt EVGA modular power supply.

1 x 250GB Evo 970 NVMe: drive for C: drive backup 1 x 1TB Sabrent NVMe drive for Operating System / Programs only. 1X WD BLACK 1TB internal SATA 7,200rpm hard drives.1 for internal projects, 1 for Library clips/sounds/music/stills./backup of working projects. 1x500GB SSD current project only drive, 2x WD RED 2TB drives for latest footage storage. Total 21TB of 8 external WD drives for backup.

ASUS NVIDIA GeForce RTX 3060 12GB. nVidia Studio driver version 560.81 - 3584xCUDA cores Direct X 12.1. Memory interface 192bit Memory bandwidth 360.05GB/s 12GB of dedicated GDDR6 video memory, shared system memory 16307MB PCi Express x8 Gen3. Two Samsung 27" LED SA350 monitors with 5000000:1 contrast ratios at 60Hz.

Running MMS 2024 Suite v 23.0.1.182 (UDP3) and VPX 14 - v20.0.3.180 (UDP3)

M Audio Axiom AIR Mini MIDI keyboard Ver 5.10.0.3507

VXP 14, MMS 2024 Suite, Vegas Studio 16, Vegas Pro 18, Cubase 4. CS6, NX Studio, Mixcraft 9 Recording Studio. Mixcraft Pro 10 Studio.

Audio System 5 x matched bi-wired 150 watt Tannoy Reveal speakers plus one Tannoy 15" 250 watt sub with 5.1 class A amplifier. Tuned to room with Tannoy audio application.

Ram Acoustic Studio speakers amplified by NAD amplifier.

Rogers LS7 speakers run from Cambridge Audio P50 amplifier

Schrodinger's Backup. "The condition of any backup is unknown until a restore is attempted."

Bol wrote on 9/2/2024, 7:07 AM

@CubeAce

Hi Ray,

As I wrote before, you can download the installer from the Xara Website, but unfortunately you can't install it anymore.

If @allaa-Azawi still has the installation CD of Xara 3D maker 7, she or he could try to install it via the installation disk. I myself was able to install Video Deluxe 15 from 2009 under Windows 11. But that's besides the point. I wish @allaa-Azawi success with her or his decisions.

Best wishes,
Rob

Last changed by Bol on 9/2/2024, 8:22 AM, changed a total of 2 times.

Als een kwestie onoplosbaar lijkt, komt dat niet omdat je de oplossing niet ziet, maar omdat je het probleem niet ziet.

If an issue seems unsolvable, it is not because you do not see the solution, but because you do not see the problem.

PC -1-

PC -2-

allaa-Azawi wrote on 9/2/2024, 9:31 AM

Hi all

thank you so much for sharing , it was so helpful to me .i tried to dowonload the program but it did not work but i will do like Bol what he said but why it work with VPX and dont work with other Magix programs .

thanks to you all

emmrecs wrote on 9/2/2024, 9:37 AM

@allaa-Azawi

why it work with VPX and dont work with other Magix programs 

I have Xara 3d Maker 7 installed and running on my Win 10 machine but I suspect the answer to your question as to why it doesn't work with other Magix programs is possibly its age. I don't think it has been updated since at least 2018.

Why it seems to work only with VPX I really cannot say so perhaps this is a question you should send in an email to infoservice@magix.net.

Jeff
Forum Moderator

Win 10 Pro 64 bit, Intel i7 Quad Core 6700K @ 4GHz, 32 GB RAM, NVidia GTX 1660TI and Intel HD530 Graphics, MOTU 8-Pre f/w audio interface, VPX, MEP, Music Maker, PhotoStory Deluxe, Photo Manager Deluxe, Xara 3D Maker 7, Samplitude Pro X7 Suite, Reaper, Adobe Audition 3, CS6 and CC, 2 x Canon HG10 cameras, 1 x Canon EOS 600D, Akaso EK7000 Pro Action Cam

browj2 wrote on 9/2/2024, 9:59 AM

@allaa-Azawi

Hi,

As we have pointed out, you don't need to install Xara 3D Maker if you have VPX. VPX has features that Movie Studio doesn't, and opening the full 3D Maker is one of them.

That said, I would like confirmation from someone who has W11 and VPX16 that the 3D Maker that comes embedded with VPX actually works.

As to why 3D Maker embedded in VPX works in Windows 11 but Xara 3D Maker does not, I have no idea. As @emmrecs said, raise a ticket with Magix.

John CB

John C.B.

VideoPro X(16); Movie Studio 2024 Platinum; MM2025 Premium Edition; Samplitude Pro X8 Suite; see About me for more.

Desktop System - Windows 10 Pro 22H2; MB ROG STRIX B560-A Gaming WiFi; Graphics Card Zotac Gaming NVIDIA GeForce RTX-3060, PS; Power supply EVGA 750W; Intel Core i7-10700K @ 3.80GHz (UHD Graphics 630); RAM 32 GB; OS on Kingston SSD 1TB; secondary WD 2TB; others 1.5TB, 3TB, 500GB, 4TB, 5TB, 6TB, 8TB; three monitors - HP 25" main, LG 4K 27" second, HP 27" third; Casio WK-225 piano keyboard; M-Audio M-Track USB mixer.

Notebook - Microsoft Surface Pro 4, i5-6300U, 8 GB RAM, 256 SSD, W10 Pro 20H2.

YouTube Channel: @JCBrownVideos

allaa-Azawi wrote on 9/2/2024, 10:09 AM

I raise a ticket with Magic for something else but until now they didn't answer me ,when they replay I will ask them .

Bol wrote on 9/2/2024, 10:32 AM

Hi, @allaa-Azawi,

As far as I know MMS 2025 is a stripped down version of Pro X16. Because if they also put all the functions that are in Pro X16 in MMS 2025, then the purchase price of MMS 2025 will have to be higher.

@browj2 See my video that 3D maker works in VPX 16 and Windows 11.

Best wishes,
Rob

Last changed by Bol on 9/2/2024, 10:39 AM, changed a total of 1 times.

Als een kwestie onoplosbaar lijkt, komt dat niet omdat je de oplossing niet ziet, maar omdat je het probleem niet ziet.

If an issue seems unsolvable, it is not because you do not see the solution, but because you do not see the problem.

PC -1-

PC -2-

johnebaker wrote on 9/2/2024, 12:09 PM

@browj2, @allaa-Azawi

Hi

. . . . I would like confirmation from someone who has W11 and VPX16 that the 3D Maker that comes embedded with VPX actually works . . . .

It does - I checked on my laptop.

As to why it does not install, I suspect that either:

  1. The Windows 11 setting is not set as shown below, you should get a warning asking if you want to get the app from the Microsoft Store.


     
  2. Xara 3D Maker requires .NET 3.5 or earlier enabling in Windows 11, it is normally disabled, again there should be a warning message if it is not enabled.

    To enable press the Windows button and type Turn Windows, the dialogue shown below should then appear

John EB

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 23H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

Bol wrote on 9/2/2024, 12:41 PM

@johnebaker

Hi John,

I also have .NET 3.5 or earlier enabled.

Despite that, I still can't install 3D maker 7 via the Xara download link. As I noted earlier, 3D maker 7 is no longer supported/sold. The one who can give a definitive answer to that is Xara Support. Contact: https://www.xara.com/contact-us/

Best wishes,
Rob

PS. I have submitted the installation question to Xara. As soon as I get an answer back I will let you know!!

Last changed by Bol on 9/2/2024, 12:49 PM, changed a total of 1 times.

Als een kwestie onoplosbaar lijkt, komt dat niet omdat je de oplossing niet ziet, maar omdat je het probleem niet ziet.

If an issue seems unsolvable, it is not because you do not see the solution, but because you do not see the problem.

PC -1-

PC -2-

Bol wrote on 9/2/2024, 2:41 PM

@allaa-Azawi, @johnebaker, @emmrecs, @CubeAce, @browj2

Hi,

I just got a reply from Xara. This was the answer.

Thanks for your message.
Xara3D was sold and supported by our reseller partner Magix. Your previously purchased Xara product download and serial numbers are still available in the Magix Service Center: https://www.magix.com/gb/support/my-service-center/

You can try this download: http://dl04.magix.net/2011/xara3dmaker7/Xara_3D_Maker_7_en-GB_180824_11-25.exe

Magix supports issues with the installers and serial numbers: infoservice@magix.net.

​However, as of July 1st, Magix will no longer sell Xara products or the update service, so now all upgrades will be done directly with Xara. We expect to release a new version of Xara3D in the coming months.

I was able to download Xara 3D maker 7 via the download link and install it working under Windows 11.

@allaa-Azawi If you still have the P2-serial number, you can reactivate and register it.

Good luck,
Rob

Addition on September 2, 2024 at 10:02 PM

Last changed by Bol on 9/2/2024, 3:01 PM, changed a total of 1 times.

Als een kwestie onoplosbaar lijkt, komt dat niet omdat je de oplossing niet ziet, maar omdat je het probleem niet ziet.

If an issue seems unsolvable, it is not because you do not see the solution, but because you do not see the problem.

PC -1-

PC -2-

johnebaker wrote on 9/2/2024, 3:31 PM

@Bol

Hi Rob

Thanks for the update.

John EB

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 23H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

allaa-Azawi wrote on 9/2/2024, 11:44 PM

Hi Boo

Thank you so much for your help ,today I will try to download it .

allaa-Azawi wrote on 9/3/2024, 10:05 AM

Hi @Bol 

i press on the dwonloading link but it dosent happened anything it is opend a new page but it dosent download anything

Bol wrote on 9/3/2024, 10:59 AM

@allaa-Azawi

Hi,

Copy this link: http://dl04.magix.net/2011/xara3dmaker7/Xara_3D_Maker_7_en-GB_180824_11-25.exe

Paste this link into e.g. Google and click return
See the rest of the video

Good luck,
Rob

Als een kwestie onoplosbaar lijkt, komt dat niet omdat je de oplossing niet ziet, maar omdat je het probleem niet ziet.

If an issue seems unsolvable, it is not because you do not see the solution, but because you do not see the problem.

PC -1-

PC -2-

allaa-Azawi wrote on 9/3/2024, 11:11 AM

Thank you Bol

it workes i downloaded now and it works maybe because Adblocker prevent from opening the page .

thanks again

Bol wrote on 9/3/2024, 11:23 AM

@allaa-Azawi

Hi,

I am glad to hear from you that it worked. Thanks👍 for your feedback.

Good luck with putting together Xara 3D animation and putting it on the MMS2025 timeline.

Best wishes,
Rob

Als een kwestie onoplosbaar lijkt, komt dat niet omdat je de oplossing niet ziet, maar omdat je het probleem niet ziet.

If an issue seems unsolvable, it is not because you do not see the solution, but because you do not see the problem.

PC -1-

PC -2-