@fishycomics

Hi

. . . . I have to again render and overwrite and works on the render, as long as movie 2023 stays open, once closed. it REPEATS all over agan. there is no SAVE at all as I can not find it . . . . .

In addition to @CubeAce comment, this sounds like your project file has become corrupt.

Try the following:

• Load the project into MMS 2023 and select File, Manage project, Export movie file , Magix Movie file (*.mvd) give the file a name.
   
• Reset MMS 2023 - File, Settings, Reset program settings to defaults. Do note this will reset any custom filepaths or other settings you have changed.
   
• Restart MMS 2023
   
• Load the saved mvd project into MMS 2023 selecting File, Manage project, Import movie file , Magix Movie file (*.mvd).
   
• Save the project with a new name.

HTH

John EB
Forum Moderator

thanks in advance for answering if i did not say and I thank you for the answers

I am running win 11 not 10, they already id a software update so it is not fixed.

1. will check on the way the update from windows load ,and also about a recovery, to go back some.

2. on export I must each time go in advance, and take away the one CPU then the balance. so I will then need to go look at my graphics side.

3 I reset the program, I deleted "ALL" and ran this twice, the only thing I did not do was run before the Magix update, and its not magix but part of win.

will continue to figure this out

My only alternative is to format the machine and see if it fixes the error. if it ain't broken leave it alone and its now broken and can not be left like this UH bouy

@fishycomics

Hi,

Also, did you try a new project with different material to see if the same problem exists?

John CB

@browj2  Yes, fails to work. correctly

thanks all: let me try to show some shots, explain the Issue, as this came about recently while all worked perfectly fine.

1 each new start up, you can simply go to File-export movie-Mpeg-4, and render empty timeline.

the Error processing CPU comes up, and simply repeat to do a full render, no issues. all resolutions H264, H265 and other cameras

A) The photo shows Multi CPU

B) the save is shown by the top line that fails to actually save, that is what I am finding out for one.

C) if I go in to File-Settings-Programs- Device options, I can change the three lines, as I change to the Arc on one, two three I can crash the system

The start up does not recover, knowing I have to look at file-recent projects

D) changed to the default Irix graphics ( no default) settings noted, unless you reset all settings elewhere)

and go to File-export movie- HEVC, and render, this works, but the auto playback is Disabled.lower thirds,

2. the SOlution and answer is to change the File-Settings-Programs-device Options graphics to a working one , the export to CPU, and M-peg-4 advances to one's liking.

this works on M-peg4 right now

this also works

The Resolution is to Fix the Export, the solution is to use Either CPU, or microsofts warp. slows the render

As this is not a project issue but of the Xport.

@fishycomics

Hi

The issue is with an Intel graphics accelerator driver - see this Microsoft topic for a possible resolution.

If that does not fix the issue, we need more information to help diagnose the issue(s) you are having:

The specification of your computer system including Windows version and program version, see this topic for what is required and please quote processor and graphics card make/model in full.

I would suggest you put this information in your profile signature so we do not have to keep asking for it.

Are you using Re-Bar?

John EB
Forum Moderator

Thank you, not sure what is Re-Bar?

As I found the arc graphics . last update was sept 2023 updating driver

+ +

As enough space is correctly on the machine to update again more updates, since yesterday

Aug 2023

will return to update as machine must update on recent updates that magically appear, then the thing is

to Unistall, and reinstall graphics to see if resolves it

@fishycomics

I notice on your first image on exporting that you have multiple GPUs selected in the hardware acceleration options when you only have one.

Try selecting using only one GPU in that Drop down menu. The selections should be Multiple GPUs, Single GPU or CPU.

Resizeable bar enables faster connections between the GPUs in use to the CPU. It is normally a bios setting.

Ray.

@CubeAce  correct the choice I have is

and in order to change it and lock in will be to go to File-settings-programs-Device options

Lock it in to work.

additional info I am uninstalling four updates, as I was going to add that to the above

Basically if I want to use this program, till I can resolve the issue that is my Solution right now. removed all updates before the issue. last resort, format the machine, retry. works, issue is on the machine. This puts a dapper but at least I got a work around. Slower renders now Lol. or simply just reload and deal with it.

just funny how let lying dogs lay if it ain't broken no longer exists

@fishycomics

Hi.

I find that any changes I make in the program settings stick regardless of whether I then save the project or not. Those are hardware settings as opposed to project settings. To my mind they should be included with the project settings.

Those altered settings are even carried over to other previous projects that had different settings applied. That can be annoying and even troublesome sometimes as I have varying needs depending on what I am doing within a project.

It does come down to hardware though. If the data can be handled fast enough at all stages of transferring from one component to another then there is no need to start changing the settings the program chooses when installed and it looks at your hardware. The higher end the components are the less problems you get due to the speed and capacity of the components. The specs page first paragraph says as much in advertising speak.

The problem for me is the more I can do the more I push the program and the more I push the program the less effective my components become and adjustments need to be made to continue.

Be aware that all they claim is measured against a project created at an HD resolution without the use of third party effects. Once you cross that line the minimum specs needed as stated with the base program are no longer applicable and the improvements to hardware can escalate quite quickly.

[Edit] You will need those Microsoft updates. I would advise against removal.

Ray.

I totally hear you guys. I will look in to this further. I will post an About my pc here if it helps you.

Give @johnebaker a round of Applause: I can not believe how a set up that ran fine, and caused an issue out of nowhere, the Intel update did the trick, not sure what happened. never had the control pnl of the graphics at all, Still got to look at the resizable bar that is new to me and will not touch it but thanks I saved and read it somewhat its a bios thing. Just very thankful I was pointed in the right direction and Resolved

cyber drink to all who helped.

thanks guys

FISH

@johnebaker @fishycomics

Hi John, Fishs.

I missed the images showing the two GPUs.

In Windows / Settings / System / Display, scroll to the bottom of that page and select 'Graphics settings.

On that page you will see. Hardware accelerated GPU scheduling. Make sure it is on.

Underneath you will see a box below 'Choose an app to set preference',

Set it to Desktop app and open the Browse box.

Make your way to Local Disc (C) / Program files / Magix / ProX folder and find the exe file. Click on the file to load it. Once loaded it should give three options.

Let Windows decide

Power saving

High performance.

One of those options could give you better performance. For me it is Power saving but for you it could be one of the other two. You will notice when it is wrong as performance will suffer. At worst it will not be any better.

Ray,

I went through that sys- display- graphics no where could I find the info I wanted what baffeled me

@fishycomics

Hi.

You did use the 'Browse' box and not the 'Search this list' didn't you?

Ray.

@CubeAce thanks I do not have it like your set up

if I click the browse it goes to files. at least I know its CCPU weakest and Arc strongest, just happy its resolved, I used to be good at this till things changed Lol

@fishycomics

Things often change with Windows updates. A few times a year a Windows update will reset the audio settings in Windows.

For instance, if your inboard sound chip can do 96kHz or above at 32 bit it is wasteful for video editing as it is better to have those settings at 48kHz and 24 or 16 bit as the exported files types can't go above those limits anyway and helps reduce demands in the program. Some windows updates have been known to reset such alterations back to their default settings so should be checked after any Windows update if you see any change in behaviour in your video editor.

Glad the updated graphics drivers helped. It pays to try to keep those as up to date as possible. I check for new driver monthly. Most of the time the driver will only be optimised for a new game but every now and then there are benefits for creators as well.

Happy editing.

Ray.

I guess this is how technology keeps us on its toes. Will have to keep an eye out now Lol. Maybe my next question will be about how to motion track and blur a address out, used to be so easy with MEP 12-15, no more

@fishycomics

HI

. . . . how technology keeps us on its toes . . . .

Funny, I thought it was 'how quick technology can part us from our hard earned cash' 😂

. . . . . Maybe my next question will be about how to motion track and blur a address out, used to be so easy with MEP 12-15, no more . . . .

It just so happens 😀, that there is a tutorial on motion tracking here and and using masks for blurring out multiple areas in a video clip here.

I must update the Mask tutorial, however the principles still apply in later versions of MEP/MMS, do note that the automatic application of Chromakey Alpha no longer occurs, you have to do this manually.

There are several other methods of achieving the same effect.

John EB