Kapitelmarker Kapitel zu kurz

zeus1407 schrieb am 05.02.2009 um 09:46 Uhr
Hallo,
ich habe fogendes Problem und es wäre sehr nett wenn mir jemand helfen könnte.
Ich habe mit VDL 15 einen Film aufgezeichnet, bearbeitet und Kapitelmarker automatisch gesetzt. Wenn ich dann auf den brennen Button klicke bekomme ich folgende Meldung: Das Kapitel 1 des Films Australien_01 ist kürzer als eine Sekunde. Für eine korrekte Navigation sollten Kapitel länger als 1 Sekunde sein. Möchten Sie die Disc dennoch erstellen?
Wenn ich dann auf OK klicke kommt folgende Meldung: Das Brennen wurde mit folgendem Fehler abgebrochen: Encodieren fehlgeschlagen.

Hier sende ich auch die Log Files mit:

-------------------------- 09.01.2009 14:51:26 --------------------------

09.01.2009 14:51:26.078: DLLAV32.DLL loaded, all entry points available
09.01.2009 14:51:26.078: AVSDK MsgCbFunc registered
09.01.2009 14:51:26.078: AVSDK: StatCbFunc registered
09.01.2009 14:51:28.468: AVSDK Version 6.2.160
09.01.2009 14:51:28.468: ------------ Reading Device Info ----------------
09.01.2009 14:51:28.468: AVSDK: 2 device(s) found
09.01.2009 14:51:28.468: Adapter=0 ID=0 LUN=0 F:HL-DT-ST DVDRAM GSA-H44N Revision:RB01
09.01.2009 14:51:28.484: AVSDK: 1 record device(s) available
09.01.2009 14:51:28.484: ------------ done ----------------

-------------------------- 09.01.2009 19:05:43 --------------------------

09.01.2009 19:05:43.484: DLLAV32.DLL loaded, all entry points available
09.01.2009 19:05:43.484: AVSDK MsgCbFunc registered
09.01.2009 19:05:43.484: AVSDK: StatCbFunc registered
09.01.2009 19:05:43.718: AVSDK Version 6.2.160
09.01.2009 19:05:43.718: ------------ Reading Device Info ----------------
09.01.2009 19:05:43.718: AVSDK: 2 device(s) found
09.01.2009 19:05:43.718: Adapter=0 ID=0 LUN=0 F:HL-DT-ST DVDRAM GSA-H44N Revision:RB01
09.01.2009 19:05:43.734: AVSDK: 1 record device(s) available
09.01.2009 19:05:43.734: ------------ done ----------------
09.01.2009 19:05:44.093: setting no speed limit
09.01.2009 19:05:44.093: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
09.01.2009 19:05:44.187: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
09.01.2009 19:06:39.906: setting no speed limit
09.01.2009 19:06:39.984: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
09.01.2009 19:06:46.265: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
09.01.2009 19:06:48.390: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
09.01.2009 19:06:48.406: Open Project: Schweiz_Urlaub -- dvd project 2009-01-09
09.01.2009 19:06:48.406: VideoMode: PAL Temp Dir: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\
09.01.2009 19:06:48.406: dll version 3.5.11.0
09.01.2009 19:06:48.406: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
09.01.2009 19:06:48.406: EstimateLayerSplitPoint()...
09.01.2009 19:06:48.406: Splitpunkt 4271833088 auf Disk mit Größe 954368000
09.01.2009 19:06:48.421: Title an Stelle 0, Länge 13565952, Typ 0
09.01.2009 19:06:48.421: Title an Stelle 13565952, Länge 13565952, Typ 0
09.01.2009 19:06:48.421: Title an Stelle 27131904, Länge 927236096, Typ 1
09.01.2009 19:06:48.421: ... Split möglich nach aktuellem Title, -> Abbruch
09.01.2009 19:06:48.421: Step 1 of 6, Encodiere Film 1 ...
09.01.2009 19:26:01.750: Step 1 done
09.01.2009 19:26:01.750: Step 2 of 6, Encodiere Filmmenü ...
09.01.2009 19:26:07.843: Step 2 done
09.01.2009 19:26:07.843: Step 3 of 6, Encodiere Kapitelmenü 1 ...
09.01.2009 19:26:07.859: Step 3 done
09.01.2009 19:26:07.859: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\DVD Image Schweiz_Urlaub\VTS_01_1.VOB
09.01.2009 19:26:07.859: Step 4 of 6, Erzeuge Disc-Image ...
09.01.2009 19:26:23.609: Step 4 done
09.01.2009 19:26:26.546: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
09.01.2009 19:26:28.625: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
09.01.2009 19:26:28.625: Step 5 of 6
09.01.2009 19:26:28.625: Step 5 done
09.01.2009 19:26:28.625: ------------ InitializeBurningProcess Point ----------------
09.01.2009 19:26:28.687: setting PoINT cache size to 16777216l
09.01.2009 19:26:28.687: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
09.01.2009 19:26:28.687: Booktype: don't care
09.01.2009 19:26:28.687: setting write speed to 5540000 bytes/sec
09.01.2009 19:26:28.687: this equals 4,000000x DVD / 31,405897x CD Speed
09.01.2009 19:26:28.687: ------------ done: succeeded ----------------
09.01.2009 19:26:28.687: ------------ CreateAPIProject ----------------
09.01.2009 19:26:28.687: Step 6 of 6
09.01.2009 19:26:28.687: creating DVD project in prepfile mode...
09.01.2009 19:26:28.687: create volume... OK
09.01.2009 19:26:28.687: verify option OFF
09.01.2009 19:26:28.703: adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\DVD Image Schweiz_Urlaub\VIDEO_TS.IFO"
09.01.2009 19:26:28.703: adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\DVD Image Schweiz_Urlaub\VIDEO_TS.VOB"
09.01.2009 19:26:29.578: adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\DVD Image Schweiz_Urlaub\VTS_01_1.VOB"
09.01.2009 19:26:29.578: adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\DVD Image Schweiz_Urlaub\VTS_01_0.IFO"
09.01.2009 19:26:29.578: Step 6 done
09.01.2009 19:26:29.578: ------------ done ----------------
09.01.2009 19:26:29.578: ------------ BurnToDisc ----------------
09.01.2009 19:26:29.578: time: Fri Jan 09 19:26:29 2009

09.01.2009 19:26:29.593: Step 6 of 6
09.01.2009 19:26:29.609: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
09.01.2009 19:26:29.609: Booktype: don't care
09.01.2009 19:26:29.609: setting write speed to 5540000 bytes/sec
09.01.2009 19:26:29.609: this equals 4,000000x DVD / 31,405897x CD Speed
09.01.2009 19:26:29.609: Check on previously direct recorded session...OK
09.01.2009 19:26:29.625: AVSDK Message - INFO: :Recording volume ...
09.01.2009 19:26:29.625: AVSDK Status - Begin operation Recording 452896 sectors/frames
09.01.2009 19:26:29.625: time: Fri Jan 09 19:26:29 2009

09.01.2009 19:26:29.640: AVSDK Message - INFO: :Recording -> writing data ...
09.01.2009 19:26:31.703: wrote LeadIn, start DataCopy
09.01.2009 19:26:31.703: time: Fri Jan 09 19:26:31 2009

09.01.2009 19:29:32.078: writing leadout and closing disc
09.01.2009 19:29:32.078: time: Fri Jan 09 19:29:32 2009

09.01.2009 19:30:13.234: writing leadout and closing disc
09.01.2009 19:30:13.234: time: Fri Jan 09 19:30:13 2009

09.01.2009 19:30:13.234: AVSDK Status - End operation Recording 452896 sectors/frames
09.01.2009 19:30:13.234: AVSDK Message - INFO: :Recording successfully completed
09.01.2009 19:30:15.312: Step 6 done
09.01.2009 19:30:15.312: ------------ done ----------------
09.01.2009 19:30:15.312: time: Fri Jan 09 19:30:15 2009


-------------------------- 09.01.2009 20:15:33 --------------------------

09.01.2009 20:15:33.921: DLLAV32.DLL loaded, all entry points available
09.01.2009 20:15:33.921: AVSDK MsgCbFunc registered
09.01.2009 20:15:33.921: AVSDK: StatCbFunc registered
09.01.2009 20:15:34.109: AVSDK Version 6.2.160
09.01.2009 20:15:34.109: ------------ Reading Device Info ----------------
09.01.2009 20:15:34.109: AVSDK: 2 device(s) found
09.01.2009 20:15:34.109: Adapter=0 ID=0 LUN=0 F:HL-DT-ST DVDRAM GSA-H44N Revision:RB01
09.01.2009 20:15:34.109: AVSDK: 1 record device(s) available
09.01.2009 20:15:34.109: ------------ done ----------------
09.01.2009 20:15:34.234: setting no speed limit
09.01.2009 20:15:34.234: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
09.01.2009 20:15:34.265: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
09.01.2009 20:15:34.265: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
09.01.2009 20:15:34.265: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!
09.01.2009 20:15:39.703: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
09.01.2009 20:15:39.703: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
09.01.2009 20:15:39.703: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!

-------------------------- 10.01.2009 14:49:28 --------------------------

10.01.2009 14:49:28.921: DLLAV32.DLL loaded, all entry points available
10.01.2009 14:49:28.921: AVSDK MsgCbFunc registered
10.01.2009 14:49:28.921: AVSDK: StatCbFunc registered
10.01.2009 14:49:33.421: AVSDK Version 6.2.160
10.01.2009 14:49:33.421: ------------ Reading Device Info ----------------
10.01.2009 14:49:33.421: AVSDK: 2 device(s) found
10.01.2009 14:49:33.421: Adapter=0 ID=0 LUN=0 F:HL-DT-ST DVDRAM GSA-H44N Revision:RB01
10.01.2009 14:49:33.421: AVSDK: 1 record device(s) available
10.01.2009 14:49:33.421: ------------ done ----------------
10.01.2009 14:49:33.593: setting no speed limit
10.01.2009 14:49:33.593: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
10.01.2009 14:49:38.703: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
10.01.2009 14:49:55.250: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
10.01.2009 14:50:08.937: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
10.01.2009 14:50:11.062: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
10.01.2009 14:50:11.078: Open Project: Urlaub_2008 -- dvd project 2009-01-10
10.01.2009 14:50:11.078: VideoMode: PAL Temp Dir: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\
10.01.2009 14:50:11.078: dll version 3.5.11.0
10.01.2009 14:50:11.078: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
10.01.2009 14:50:11.078: EstimateLayerSplitPoint()...
10.01.2009 14:50:11.078: Splitpunkt 4271833088 auf Disk mit Größe 1395884032
10.01.2009 14:50:11.078: Title an Stelle 0, Länge 13565952, Typ 0
10.01.2009 14:50:11.078: Title an Stelle 13565952, Länge 13565952, Typ 0
10.01.2009 14:50:11.078: Title an Stelle 27131904, Länge 1368752128, Typ 1
10.01.2009 14:50:11.078: ... Split möglich nach aktuellem Title, -> Abbruch
10.01.2009 14:50:11.093: Step 1 of 6, Encodiere Film 1 ...
10.01.2009 15:19:25.015: Step 1 done
10.01.2009 15:19:25.015: Step 2 of 6, Encodiere Filmmenü ...
10.01.2009 15:19:31.359: Step 2 done
10.01.2009 15:19:31.359: Step 3 of 6, Encodiere Kapitelmenü 1 ...
10.01.2009 15:19:31.359: Step 3 done
10.01.2009 15:19:31.359: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\DVD Image Urlaub_2008\VTS_01_1.VOB
10.01.2009 15:19:31.359: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\DVD Image Urlaub_2008\VTS_01_2.VOB
10.01.2009 15:19:31.359: Step 4 of 6, Erzeuge Disc-Image ...
10.01.2009 15:19:57.500: Step 4 done
10.01.2009 15:20:00.093: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
10.01.2009 15:20:02.187: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
10.01.2009 15:20:02.203: Step 5 of 6
10.01.2009 15:20:02.203: Step 5 done
10.01.2009 15:20:02.203: ------------ InitializeBurningProcess Point ----------------
10.01.2009 15:20:02.250: setting PoINT cache size to 16777216l
10.01.2009 15:20:02.250: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
10.01.2009 15:20:02.250: Booktype: don't care
10.01.2009 15:20:02.265: setting write speed to 3324000 bytes/sec
10.01.2009 15:20:02.265: this equals 2,400000x DVD / 18,843538x CD Speed
10.01.2009 15:20:02.265: ------------ done: succeeded ----------------
10.01.2009 15:20:02.265: ------------ CreateAPIProject ----------------
10.01.2009 15:20:02.265: Step 6 of 6
10.01.2009 15:20:02.265: creating DVD project in prepfile mode...
10.01.2009 15:20:02.265: create volume... OK
10.01.2009 15:20:02.265: verify option OFF
10.01.2009 15:20:02.281: adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\DVD Image Urlaub_2008\VIDEO_TS.IFO"
10.01.2009 15:20:02.281: adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\DVD Image Urlaub_2008\VIDEO_TS.VOB"
10.01.2009 15:20:02.281: adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\DVD Image Urlaub_2008\VTS_01_1.VOB"
10.01.2009 15:20:02.281: adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\DVD Image Urlaub_2008\VTS_01_2.VOB"
10.01.2009 15:20:02.281: adding file "C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\DVD Image Urlaub_2008\VTS_01_0.IFO"
10.01.2009 15:20:02.281: Step 6 done
10.01.2009 15:20:02.281: ------------ done ----------------
10.01.2009 15:20:02.281: ------------ BurnToDisc ----------------
10.01.2009 15:20:02.281: time: Sat Jan 10 15:20:02 2009

10.01.2009 15:20:02.281: Step 6 of 6
10.01.2009 15:20:02.281: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
10.01.2009 15:20:02.281: Booktype: don't care
10.01.2009 15:20:02.281: setting write speed to 3324000 bytes/sec
10.01.2009 15:20:02.281: this equals 2,400000x DVD / 18,843538x CD Speed
10.01.2009 15:20:02.281: Check on previously direct recorded session...OK
10.01.2009 15:20:02.328: AVSDK Message - INFO: :Recording volume ...
10.01.2009 15:20:02.328: AVSDK Message - INFO: :Recording -> formatting disc to prepare recording ...
10.01.2009 15:20:12.343: AVSDK Status - Begin operation Formatting disc
10.01.2009 15:20:12.343: time: Sat Jan 10 15:20:12 2009

10.01.2009 15:20:31.671: AVSDK Status - End operation Formatting disc
10.01.2009 15:20:32.015: AVSDK Status - Begin operation Recording 636604 sectors/frames
10.01.2009 15:20:32.015: time: Sat Jan 10 15:20:32 2009

10.01.2009 15:20:32.015: AVSDK Message - INFO: :Recording -> writing data ...
10.01.2009 15:20:32.156: wrote LeadIn, start DataCopy
10.01.2009 15:20:32.156: time: Sat Jan 10 15:20:32 2009

10.01.2009 15:26:59.390: writing leadout and closing disc
10.01.2009 15:26:59.390: time: Sat Jan 10 15:26:59 2009

10.01.2009 15:26:59.406: writing leadout and closing disc
10.01.2009 15:26:59.406: time: Sat Jan 10 15:26:59 2009

10.01.2009 15:27:09.921: writing leadout and closing disc
10.01.2009 15:27:09.921: time: Sat Jan 10 15:27:09 2009

10.01.2009 15:27:09.921: AVSDK Message - INFO: :Recording -> finalising disc ...
10.01.2009 15:44:20.859: AVSDK Status - End operation Recording 636604 sectors/frames
10.01.2009 15:44:20.859: AVSDK Message - INFO: :Recording successfully completed
10.01.2009 15:44:21.375: Step 6 done
10.01.2009 15:44:21.375: ------------ done ----------------
10.01.2009 15:44:21.375: time: Sat Jan 10 15:44:21 2009


-------------------------- 29.01.2009 19:52:39 --------------------------

29.01.2009 19:52:39.375: DLLAV32.DLL loaded, all entry points available
29.01.2009 19:52:39.375: AVSDK MsgCbFunc registered
29.01.2009 19:52:39.375: AVSDK: StatCbFunc registered
29.01.2009 19:52:48.609: AVSDK Version 6.2.160
29.01.2009 19:52:48.609: ------------ Reading Device Info ----------------
29.01.2009 19:52:48.609: AVSDK: 2 device(s) found
29.01.2009 19:52:48.609: Adapter=0 ID=0 LUN=0 F:HL-DT-ST DVDRAM GSA-H44N Revision:RB01
29.01.2009 19:52:48.609: AVSDK: 1 record device(s) available
29.01.2009 19:52:48.609: ------------ done ----------------
29.01.2009 19:52:48.812: setting no speed limit
29.01.2009 19:52:48.812: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
29.01.2009 19:52:48.843: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (ASC/ASCQ 3A/00)
29.01.2009 19:52:48.843: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
29.01.2009 19:52:48.843: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 210 - no disc !!!

-------------------------- 03.02.2009 10:40:33 --------------------------

03.02.2009 10:40:33.562: DLLAV32.DLL loaded, all entry points available
03.02.2009 10:40:33.562: AVSDK MsgCbFunc registered
03.02.2009 10:40:33.562: AVSDK: StatCbFunc registered
03.02.2009 10:40:33.828: AVSDK Version 6.2.160
03.02.2009 10:40:33.828: ------------ Reading Device Info ----------------
03.02.2009 10:40:33.828: AVSDK: 2 device(s) found
03.02.2009 10:40:33.828: Adapter=0 ID=0 LUN=0 F:HL-DT-ST DVDRAM GSA-H44N Revision:RB01
03.02.2009 10:40:33.828: AVSDK: 1 record device(s) available
03.02.2009 10:40:33.828: ------------ done ----------------
03.02.2009 10:40:33.921: setting no speed limit
03.02.2009 10:40:33.921: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
03.02.2009 10:40:36.609: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 10:41:18.453: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 10:41:26.437: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 10:41:28.546: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 10:41:48.093: !!! DBK error in BurnProject: 2 - user cancelled operation !!!
03.02.2009 10:43:43.328: setting no speed limit
03.02.2009 10:43:46.015: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 10:43:48.515: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 10:43:50.625: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 10:44:04.812: !!! DBK error in BurnProject: 2 - user cancelled operation !!!
03.02.2009 10:46:05.015: setting no speed limit
03.02.2009 10:46:07.718: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 10:46:09.937: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 10:46:12.046: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 10:46:13.218: Open Project: Australien -- dvd project 2009-02-03
03.02.2009 10:46:13.218: VideoMode: PAL Temp Dir: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\
03.02.2009 10:46:13.218: dll version 3.5.11.0
03.02.2009 10:46:13.218: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
03.02.2009 10:46:13.218: EstimateLayerSplitPoint()...
03.02.2009 10:46:13.218: Splitpunkt 4271833088 auf Disk mit Größe 3953197056
03.02.2009 10:46:13.218: Title an Stelle 0, Länge 25427968, Typ 0
03.02.2009 10:46:13.218: Title an Stelle 25427968, Länge 131072, Typ 0
03.02.2009 10:46:13.218: Title an Stelle 25559040, Länge 0, Typ 1
03.02.2009 10:46:13.218: Title an Stelle 25559040, Länge 327680, Typ 0
03.02.2009 10:46:13.218: Title an Stelle 25886720, Länge 3927310336, Typ 1
03.02.2009 10:46:13.218: ... Split möglich nach aktuellem Title, -> Abbruch
03.02.2009 10:46:13.234: Step 1 of 8, Encodiere Film 1 ...
03.02.2009 10:46:13.250: Step 1 done
03.02.2009 10:46:13.265: ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
03.02.2009 10:46:13.265: !!! DBK error in BurnProject: 45 - movie encoding failed !!!
03.02.2009 10:47:38.234: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 10:47:40.343: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 10:47:44.375: Open Project: Australien -- dvd project 2009-02-03
03.02.2009 10:47:44.375: VideoMode: PAL Temp Dir: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\
03.02.2009 10:47:44.375: dll version 3.5.11.0
03.02.2009 10:47:44.375: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
03.02.2009 10:47:44.375: EstimateLayerSplitPoint()...
03.02.2009 10:47:44.375: Splitpunkt 4271833088 auf Disk mit Größe 3953197056
03.02.2009 10:47:44.375: Title an Stelle 0, Länge 25427968, Typ 0
03.02.2009 10:47:44.375: Title an Stelle 25427968, Länge 131072, Typ 0
03.02.2009 10:47:44.375: Title an Stelle 25559040, Länge 0, Typ 1
03.02.2009 10:47:44.375: Title an Stelle 25559040, Länge 327680, Typ 0
03.02.2009 10:47:44.375: Title an Stelle 25886720, Länge 3927310336, Typ 1
03.02.2009 10:47:44.390: ... Split möglich nach aktuellem Title, -> Abbruch
03.02.2009 10:47:44.390: Step 1 of 8, Encodiere Film 1 ...
03.02.2009 10:47:44.390: Step 1 done
03.02.2009 10:47:44.390: ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
03.02.2009 10:47:44.390: !!! DBK error in BurnProject: 45 - movie encoding failed !!!
03.02.2009 10:48:55.375: setting no speed limit
03.02.2009 10:48:55.453: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 10:48:57.578: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 10:48:59.687: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 10:49:12.390: !!! DBK error in BurnProject: 2 - user cancelled operation !!!
03.02.2009 11:13:18.218: setting no speed limit
03.02.2009 11:13:20.843: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 11:13:23.984: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 11:13:26.093: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 11:13:32.296: Open Project: Australien -- dvd project 2009-02-03
03.02.2009 11:13:32.296: VideoMode: PAL Temp Dir: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\
03.02.2009 11:13:32.296: dll version 3.5.11.0
03.02.2009 11:13:32.296: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
03.02.2009 11:13:32.296: EstimateLayerSplitPoint()...
03.02.2009 11:13:32.296: Splitpunkt 4271833088 auf Disk mit Größe 3953295360
03.02.2009 11:13:32.296: Title an Stelle 0, Länge 25427968, Typ 0
03.02.2009 11:13:32.296: Title an Stelle 25427968, Länge 131072, Typ 0
03.02.2009 11:13:32.296: Title an Stelle 25559040, Länge 0, Typ 1
03.02.2009 11:13:32.296: Title an Stelle 25559040, Länge 425984, Typ 0
03.02.2009 11:13:32.296: Title an Stelle 25985024, Länge 3927310336, Typ 1
03.02.2009 11:13:32.296: ... Split möglich nach aktuellem Title, -> Abbruch
03.02.2009 11:13:32.296: Step 1 of 8, Encodiere Film 1 ...
03.02.2009 11:13:32.312: Step 1 done
03.02.2009 11:13:32.312: ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
03.02.2009 11:13:32.312: !!! DBK error in BurnProject: 45 - movie encoding failed !!!
03.02.2009 11:16:36.109: setting no speed limit
03.02.2009 11:16:38.750: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 11:44:51.359: setting no speed limit
03.02.2009 11:44:54.031: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 11:49:10.437: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 11:49:12.546: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 11:49:21.578: Open Project: Australien -- dvd project 2009-02-03
03.02.2009 11:49:21.578: VideoMode: PAL Temp Dir: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\
03.02.2009 11:49:21.578: dll version 3.5.11.0
03.02.2009 11:49:21.578: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
03.02.2009 11:49:21.578: EstimateLayerSplitPoint()...
03.02.2009 11:49:21.578: Splitpunkt 4271833088 auf Disk mit Größe 3953295360
03.02.2009 11:49:21.578: Title an Stelle 0, Länge 25427968, Typ 0
03.02.2009 11:49:21.593: Title an Stelle 25427968, Länge 131072, Typ 0
03.02.2009 11:49:21.593: Title an Stelle 25559040, Länge 0, Typ 1
03.02.2009 11:49:21.593: Title an Stelle 25559040, Länge 425984, Typ 0
03.02.2009 11:49:21.593: Title an Stelle 25985024, Länge 3927310336, Typ 1
03.02.2009 11:49:21.593: ... Split möglich nach aktuellem Title, -> Abbruch
03.02.2009 11:49:21.593: Step 1 of 8, Encodiere Film 1 ...
03.02.2009 11:49:21.593: Step 1 done
03.02.2009 11:49:21.593: ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
03.02.2009 11:49:21.593: !!! DBK error in BurnProject: 45 - movie encoding failed !!!
03.02.2009 11:49:51.812: setting no speed limit
03.02.2009 11:49:51.890: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 11:49:55.875: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 11:49:57.984: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 11:50:10.750: !!! DBK error in BurnProject: 2 - user cancelled operation !!!
03.02.2009 11:50:28.109: setting no speed limit
03.02.2009 11:50:28.187: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 11:50:29.937: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 11:50:32.046: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 11:50:33.703: !!! DBK error in BurnProject: 2 - user cancelled operation !!!
03.02.2009 11:52:30.234: setting no speed limit
03.02.2009 11:52:30.328: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 11:53:00.015: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 11:53:02.125: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 11:53:05.343: !!! DBK error in BurnProject: 2 - user cancelled operation !!!
03.02.2009 12:05:28.515: setting no speed limit
03.02.2009 12:05:31.156: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 12:05:38.531: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 12:05:40.640: AVSDK Message - ERROR: :Cannot get device/media specific information -> Required command option not supported by drive (ASC/ASCQ 24/00)
03.02.2009 12:08:43.375: Open Project: Australien -- dvd project 2009-02-03
03.02.2009 12:08:43.375: VideoMode: PAL Temp Dir: C:\Dokumente und Einstellungen\All Users\Dokumente\MAGIX_Video_deluxe_15\Disc Images\
03.02.2009 12:08:43.375: dll version 3.5.11.0
03.02.2009 12:08:43.375: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
03.02.2009 12:08:43.375: EstimateLayerSplitPoint()...
03.02.2009 12:08:43.375: Splitpunkt 4271833088 auf Disk mit Größe 3953590272
03.02.2009 12:08:43.390: Title an Stelle 0, Länge 25427968, Typ 0
03.02.2009 12:08:43.390: Title an Stelle 25427968, Länge 131072, Typ 0
03.02.2009 12:08:43.390: Title an Stelle 25559040, Länge 0, Typ 1
03.02.2009 12:08:43.390: Title an Stelle 25559040, Länge 720896, Typ 0
03.02.2009 12:08:43.390: Title an Stelle 26279936, Länge 3927310336, Typ 1
03.02.2009 12:08:43.390: ... Split möglich nach aktuellem Title, -> Abbruch
03.02.2009 12:08:43.390: Step 1 of 8, Encodiere Film 1 ...
03.02.2009 12:08:43.390: Step 1 done
03.02.2009 12:08:43.390: ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
03.02.2009 12:08:43.390: !!! DBK error in BurnProject: 45 - movie encoding failed !!!

Ich bin schon ganz verzweifelt und hoffe Jemand kann mir helfen. Wenn mir  Jemand helfen kann, wäre es super, wenn du mir die Schritte, die ich tun muss genau erklärst, da ich absoluter Neuling auf diesem Gebiet bin

Vielen Dank im voraus

zeus1407

Kommentare

Tom-Wiedemuth schrieb am 05.02.2009 um 20:08 Uhr
Als erstes würde ich die Lücke beseitigen, der Hinweis das ein Kapitel nicht kürzer als eine Sekunde  sein sollte, kommt ja  nicht grundlos ...

Bitte auch das aktuelle Patch (8.0.5.12) einspielen, falls das Problem dadurch nicht gelöst wird bitte eine Supportanfrage stellen.