Fehlermeldung beim Brennen

Guenter44 schrieb am 27.04.2009 um 17:05 Uhr
Bei beiden Magixprogrammen Fotos auf CD DVD sowie Video de Luxe 15 Premium bricht bei der DVD - Erstellung das Programm mit einer Fehlermeldung ab:

Beispiel:
25.04.2009 17:47:42.987:   Step 6 of 6
25.04.2009 17:47:42.987:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
25.04.2009 17:47:42.987:       Booktype:    don't care
25.04.2009 17:47:42.987:   setting write speed to 5540000  bytes/sec
25.04.2009 17:47:42.987:   this equals 4,000000x DVD / 31,405897x CD Speed
25.04.2009 17:47:42.987:   Check on previously direct recorded session...OK
25.04.2009 17:47:43.081:   AVSDK Message - INFO: :Recording volume ...
25.04.2009 17:47:43.081:   AVSDK Status - Begin operation Recording 594688 sectors/frames
25.04.2009 17:47:43.096:   time: Sat Apr 25 17:47:43 2009

25.04.2009 17:47:43.096:   AVSDK Message - INFO: :Recording -> writing data ...
25.04.2009 17:47:43.440:   wrote LeadIn, start DataCopy
25.04.2009 17:47:43.455:   time: Sat Apr 25 17:47:43 2009

25.04.2009 17:51:30.622:   AVSDK Message - ERROR: :Cannot write to disc -> Command aborted, possibly caused by a communication error between host adapter and drive or by a drive malfunction (ASC/ASCQ FF/00)
25.04.2009 17:51:43.570:   AVSDK Status - End operation Recording 594688 sectors/frames
25.04.2009 17:51:43.570:   AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
25.04.2009 17:51:43.570:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 100 - drive not fully supported !!!
25.04.2009 17:51:43.586:   Step 6 done
25.04.2009 17:51:43.586:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 240 - drive not fully supported !!!
25.04.2009 17:51:43.586:   ------------ done ----------------
25.04.2009 17:51:43.602:   time: Sat Apr 25 17:51:43 2009

Betriebssystem Windows Vista
Nero 8
Was kann ich tun?