12.05.2009 17:49:18.349:   DLLAV32.DLL loaded, all entry points available
12.05.2009 17:49:18.349:   AVSDK MsgCbFunc registered
12.05.2009 17:49:18.349:   AVSDK: StatCbFunc registered
12.05.2009 17:49:38.130:   AVSDK Version 6.2.160
12.05.2009 17:49:38.130:   ------------ Reading Device Info ----------------
12.05.2009 17:49:38.130:   AVSDK: 2 device(s) found
12.05.2009 17:49:38.145:   Adapter=0  ID=1  LUN=0   E:MATSHITA DVD-RAM UJ870BJ Revision:1.02
12.05.2009 17:49:38.145:   AVSDK: 1 record device(s) available
12.05.2009 17:49:38.145:   ------------ done ----------------
12.05.2009 17:49:38.473:   setting no speed limit
12.05.2009 17:49:38.473:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
12.05.2009 17:50:37.191:   Open Project: Taufe_ -- dvd project 2009-05-12
12.05.2009 17:50:37.191:   VideoMode: PAL   Temp Dir: C:\Users\Fausik\Documents\MAGIX_Video_deluxe_15_Premium\Disc Images\
12.05.2009 17:50:37.191:   dll version 3.6.5.0
12.05.2009 17:50:37.191:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
12.05.2009 17:50:37.207:   EstimateLayerSplitPoint()...
12.05.2009 17:50:37.207:   Splitpunkt 4271833088 auf Disk mit Größe 575668224
12.05.2009 17:50:37.207:   Title an Stelle 0, Länge 131072, Typ 0
12.05.2009 17:50:37.222:   Title an Stelle 131072, Länge 524288, Typ 0
12.05.2009 17:50:37.222:   Title an Stelle 655360, Länge 575012864, Typ 1
12.05.2009 17:50:37.222:   ... Split möglich nach aktuellem Title, -> Abbruch
12.05.2009 17:50:51.184:   Step 1 of 6, Encodiere Film 1 ...
12.05.2009 17:54:59.193:   Step 1 done
12.05.2009 17:54:59.209:   Step 2 of 6, Encodiere Filmmenü ...
12.05.2009 17:54:59.552:   Step 2 done
12.05.2009 17:54:59.552:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
12.05.2009 17:55:03.795:   Step 3 done
12.05.2009 17:55:03.795:   ConvertMovie() - encoded file: C:\Users\Fausik\Documents\MAGIX_Video_deluxe_15_Premium\Disc Images\DVD Image Taufe_\VTS_01_1.VOB
12.05.2009 17:55:03.811:   Step 4 of 6, Erzeuge Disc-Image ...
12.05.2009 17:55:14.949:   Step 4 done
12.05.2009 17:55:19.832:   Step 5 of 6
12.05.2009 17:55:19.832:   Step 5 done
12.05.2009 17:55:19.832:   ------------ InitializeBurningProcess Point ----------------
12.05.2009 17:55:19.879:   setting PoINT cache size to 16777216l
12.05.2009 17:55:26.259:   Used burn options:
 simulation: off
 DiscAtOnce: off
 BurnOver: off
 BurnProof: on
 FormatDisc: off
 ShortLeadOut: off
 NoDefectMgmt: off
12.05.2009 17:55:26.259:    Booktype: don't care
12.05.2009 17:55:26.275:   setting write speed to 3324000  bytes/sec
12.05.2009 17:55:26.275:   this equals 2,400000x DVD / 18,843538x CD Speed
12.05.2009 17:55:26.275:   ------------ done: succeeded ----------------
12.05.2009 17:55:26.275:   ------------ CreateAPIProject ----------------
12.05.2009 17:55:26.275:   Step 6 of 6
12.05.2009 17:55:26.275:   creating DVD project in prepfile mode...
12.05.2009 17:55:26.290:   create volume... OK
12.05.2009 17:55:26.290:   verify option OFF
12.05.2009 17:55:26.290:   adding file "C:\Users\Fausik\Documents\MAGIX_Video_deluxe_15_Premium\Disc Images\DVD Image Taufe_\VIDEO_TS.IFO"
12.05.2009 17:55:26.290:   adding file "C:\Users\Fausik\Documents\MAGIX_Video_deluxe_15_Premium\Disc Images\DVD Image Taufe_\VIDEO_TS.VOB"
12.05.2009 17:55:26.290:   adding file "C:\Users\Fausik\Documents\MAGIX_Video_deluxe_15_Premium\Disc Images\DVD Image Taufe_\VTS_01_1.VOB"
12.05.2009 17:55:26.290:   adding file "C:\Users\Fausik\Documents\MAGIX_Video_deluxe_15_Premium\Disc Images\DVD Image Taufe_\VTS_01_0.IFO"
12.05.2009 17:55:26.306:   adding file "C:\Users\Fausik\Documents\MAGIX_Video_deluxe_15_Premium\Disc Images\DVD Image Taufe_\VTS_01_0.VOB"
12.05.2009 17:55:26.306:   Step 6 done
12.05.2009 17:55:26.306:   ------------ done ----------------
12.05.2009 17:55:26.306:   ------------ BurnToDisc ----------------
12.05.2009 17:55:26.306:   time: Tue May 12 17:55:26 2009

12.05.2009 17:55:26.306:   Step 6 of 6
12.05.2009 17:55:26.306:   Used burn options:
 simulation: off
 DiscAtOnce: off
 BurnOver: off
 BurnProof: on
 FormatDisc: off
 ShortLeadOut: off
 NoDefectMgmt: off
12.05.2009 17:55:26.306:    Booktype: don't care
12.05.2009 17:55:26.321:   setting write speed to 3324000  bytes/sec
12.05.2009 17:55:26.321:   this equals 2,400000x DVD / 18,843538x CD Speed
12.05.2009 17:55:26.321:   Check on previously direct recorded session...OK
12.05.2009 17:55:26.337:   AVSDK Message - INFO: :Recording volume ...
12.05.2009 17:55:26.337:   AVSDK Status - Begin operation Recording 249808 sectors/frames
12.05.2009 17:55:26.353:   time: Tue May 12 17:55:26 2009

12.05.2009 17:55:26.353:   AVSDK Message - INFO: :Recording -> writing data ...
12.05.2009 17:55:27.741:   wrote LeadIn, start DataCopy
12.05.2009 17:55:27.741:   time: Tue May 12 17:55:27 2009

12.05.2009 17:55:49.097:   AVSDK Message - ERROR: :Cannot write to disc -> Power calibration or program memory area update failure (ASC/ASCQ 73/00)
12.05.2009 17:55:59.284:   AVSDK Message - ERROR: :Cannot write or close track -> Power calibration or program memory area update failure (ASC/ASCQ 73/03)
12.05.2009 17:55:59.378:   AVSDK Status - End operation Recording 249808 sectors/frames
12.05.2009 17:55:59.378:   AVSDK Message - INFO: :Recording failed due to write error on disc
12.05.2009 17:55:59.378:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
12.05.2009 17:55:59.378:   Step 6 done
12.05.2009 17:55:59.378:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 251 - write error occurred on disc !!!
12.05.2009 17:55:59.393:   ------------ done ----------------
12.05.2009 17:55:59.393:   time: Tue May 12 17:55:59 2009

12.05.2009 17:55:59.393:   project burning failed
12.05.2009 17:55:59.393:   !!! DBK error in CBurnDevSupport::BurnProject(): 251 - write error occurred on disc !!!
12.05.2009 17:55:59.409:   !!! DBK error in BurnProject: 251 - write error occurred on disc !!!