Abbruch Brennvorgang

PeLe schrieb am 27.11.2008 um 13:25 Uhr
Hallo Geschi,
sollte es nur an einer nicht geeigneten DVD DL liegen? Außer mit Verbatim habe ich es auch versucht mit DVD DL von RiDATA und von Intenso. Meine normalen DVD, die ordentlich gebrannt wurden sind von Sony. Ich hoffe, du kannst etwas mehr aus der dbk.log lesen. Hier das Letzte Ende der dbk.log.
Gruß aus Pommern

-------------------------- 24.11.2008 08:59:36 --------------------------

24.11.2008 08:59:36.718:   DLLAV32.DLL loaded, all entry points available
24.11.2008 08:59:36.718:   AVSDK MsgCbFunc registered
24.11.2008 08:59:36.718:   AVSDK: StatCbFunc registered
24.11.2008 08:59:36.984:   AVSDK Version 6.2.160
24.11.2008 08:59:36.984:   ------------ Reading Device Info ----------------
24.11.2008 08:59:36.984:   AVSDK: 2 device(s) found
24.11.2008 08:59:37.000:   Adapter=0  ID=0  LUN=0   G:HL-DT-ST DVD-RAM GSA-H55N Revision:1.02
24.11.2008 08:59:37.015:   AVSDK: 1 record device(s) available
24.11.2008 08:59:37.015:   ------------ done ----------------
24.11.2008 08:59:37.109:   setting no speed limit
24.11.2008 08:59:37.109:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
24.11.2008 09:00:19.593:   Open Project: DVD Files 00801 -- dvd project 2008-11-24
24.11.2008 09:00:19.593:   VideoMode: PAL   Temp Dir: F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\
24.11.2008 09:00:19.593:   dll version 3.3.6.5
24.11.2008 09:00:19.609:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
24.11.2008 09:00:19.609:   EstimateLayerSplitPoint()...
24.11.2008 09:00:19.609:   Splitpunkt 4271833088 auf Disk mit Größe 5906169856
24.11.2008 09:00:19.609:   Title an Stelle 0, Länge 61014016, Typ 0
24.11.2008 09:00:19.609:   Title an Stelle 61014016, Länge 5845155840, Typ 1
24.11.2008 09:00:19.625:   Split berechnen...
24.11.2008 09:00:19.625:   Title an Stelle 0, Länge 61014016, Typ 0
24.11.2008 09:00:19.625:   Title an Stelle 61014016, Länge 5845155840, Typ 1
24.11.2008 09:00:19.625:   Split in HMOVIE 2f7c090, Position in Datei 4210819072
24.11.2008 09:00:19.640:   Step 1 of 4, Encodiere Film 1 ...
24.11.2008 09:00:19.656:   Eintragen des Splitpunktes 4210819072 bei ConvertMovie(2f7c090)
24.11.2008 10:55:25.187:   Step 1 done
24.11.2008 10:55:25.187:   Step 2 of 4, Encodiere Filmmenü ...
24.11.2008 10:55:51.062:   Step 2 done
24.11.2008 10:55:51.078:   ConvertMovie() - encoded file: F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_1.VOB
24.11.2008 10:55:51.078:   ConvertMovie() - encoded file: F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_2.VOB
24.11.2008 10:55:51.078:   ConvertMovie() - encoded file: F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_3.VOB
24.11.2008 10:55:51.078:   ConvertMovie() - encoded file: F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_4.VOB
24.11.2008 10:55:51.093:   ConvertMovie() - encoded file: F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_5.VOB
24.11.2008 10:55:51.093:   ConvertMovie() - encoded file: F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_6.VOB
24.11.2008 10:55:51.093:   Step 3 of 4, Erzeuge Disc-Image ...
24.11.2008 11:00:22.515:   Step 3 done
24.11.2008 11:00:27.046:   Step 4 of 4
24.11.2008 11:00:27.046:   ---------------------------------------------------------------
24.11.2008 11:00:27.062:   CheckForLayerSplit(size=4273995776, strat=2)
24.11.2008 11:00:27.062:       Splitpunkt gesetzt auf 4268752896)
24.11.2008 11:00:27.062:       Prüfen, ob gesplittet werden muss...
24.11.2008 11:00:27.062:   !!! NOT ADJUSTED TO SPLIT BLOCK SIZE (F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_3.VOB)!!!
24.11.2008 11:00:27.062:   Anpassen der bestehenden Splits...
24.11.2008 11:00:27.078:   ... F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_6.VOB -> F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_7.VOB
24.11.2008 11:00:27.093:   ... F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_5.VOB -> F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_6.VOB
24.11.2008 11:00:27.093:   ... F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_4.VOB -> F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_5.VOB
24.11.2008 11:00:27.109:   Split am Punkt 1073713152 von F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_3.VOB in
    F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_3.VOB und

F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_4.VOB
24.11.2008 11:00:27.187:   Step 4 done
24.11.2008 11:00:27.187:   ------------ InitializeBurningProcess Point ----------------
24.11.2008 11:00:27.218:   setting PoINT cache size to 16777216l
24.11.2008 11:00:27.234:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
24.11.2008 11:00:27.234:       Booktype:    DVD-ROM
24.11.2008 11:00:27.234:   setting write speed to 5540000  bytes/sec
24.11.2008 11:00:27.250:   this equals 4,000000x DVD / 31,405897x CD Speed
24.11.2008 11:00:27.250:   ------------ done: succeeded ----------------
24.11.2008 11:00:27.250:   ------------ CreateAPIProject ----------------
24.11.2008 11:00:27.250:   Step 4 of 4
24.11.2008 11:00:27.250:   creating DVD project in prepfile mode...
24.11.2008 11:00:27.296:   create volume... OK
24.11.2008 11:00:27.296:   verify option OFF
24.11.2008 11:00:27.343:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VIDEO_TS.IFO"
24.11.2008 11:00:27.343:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VIDEO_TS.VOB"
24.11.2008 11:00:27.359:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_1.VOB"
24.11.2008 11:00:27.359:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_2.VOB"
24.11.2008 11:00:27.359:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_3.VOB"
24.11.2008 11:00:27.359:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_4.VOB"
24.11.2008 11:00:27.375:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_5.VOB"
24.11.2008 11:00:27.375:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_6.VOB"
24.11.2008 11:00:27.375:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_7.VOB"
24.11.2008 11:00:27.390:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\VTS_01_0.IFO"
24.11.2008 11:00:27.406:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image DVD Files 00801\content.plv"
24.11.2008 11:00:27.468:   Step 4 done
24.11.2008 11:00:27.562:   ------------ done ----------------
24.11.2008 11:00:27.562:   ------------ BurnToDisc ----------------
24.11.2008 11:00:27.562:   time: Mon Nov 24 11:00:27 2008

24.11.2008 11:00:27.578:   Step 4 of 4
24.11.2008 11:00:27.578:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
24.11.2008 11:00:27.578:       Booktype:    DVD-ROM
24.11.2008 11:00:27.578:   setting write speed to 5540000  bytes/sec
24.11.2008 11:00:27.593:   this equals 4,000000x DVD / 31,405897x CD Speed
24.11.2008 11:00:27.593:   Check on previously direct recorded session...OK
24.11.2008 11:00:27.609:   AVSDK Message - INFO: :Recording volume ...
24.11.2008 11:00:27.625:   AVSDK Message - INFO: :Recording -> setting layer boundary address for DVD+R DL ...
24.11.2008 11:00:27.640:   AVSDK Status - Begin operation Recording 2713376 sectors/frames
24.11.2008 11:00:27.640:   time: Mon Nov 24 11:00:27 2008

24.11.2008 11:00:27.656:   AVSDK Message - INFO: :Recording -> writing data ...
24.11.2008 11:00:27.656:   AVSDK Message - ERROR: :Cannot write to disc -> Required command option not supported by drive (ASC/ASCQ 24/00)
24.11.2008 11:00:27.703:   AVSDK Status - End operation Recording 2713376 sectors/frames
24.11.2008 11:00:27.718:   AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
24.11.2008 11:00:27.718:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 100 - drive not fully supported !!!
24.11.2008 11:00:27.718:   Step 4 done
24.11.2008 11:00:27.718:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 240 - drive not fully supported !!!
24.11.2008 11:00:27.734:   ------------ done ----------------
24.11.2008 11:00:27.734:   time: Mon Nov 24 11:00:27 2008

24.11.2008 11:00:27.734:   project burning failed
24.11.2008 11:00:27.750:   !!! DBK error in CBurnDevSupport::BurnProject(): 240 - drive not fully supported !!!
24.11.2008 11:00:27.796:   !!! DBK error in BurnProject: 240 - drive not fully supported !!!

-------------------------- 27.11.2008 09:11:25 --------------------------

27.11.2008 09:11:25.171:   DLLAV32.DLL loaded, all entry points available
27.11.2008 09:11:25.171:   AVSDK MsgCbFunc registered
27.11.2008 09:11:25.171:   AVSDK: StatCbFunc registered
27.11.2008 09:11:25.468:   AVSDK Version 6.2.160
27.11.2008 09:11:25.468:   ------------ Reading Device Info ----------------
27.11.2008 09:11:25.468:   AVSDK: 2 device(s) found
27.11.2008 09:11:25.468:   Adapter=0  ID=0  LUN=0   G:HL-DT-ST DVD-RAM GSA-H55N Revision:1.02
27.11.2008 09:11:25.484:   AVSDK: 1 record device(s) available
27.11.2008 09:11:25.484:   ------------ done ----------------
27.11.2008 09:11:25.593:   setting no speed limit
27.11.2008 09:11:25.609:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!!
27.11.2008 09:14:07.140:   Open Project: Disc_2008-11-27 -- dvd project 2008-11-27
27.11.2008 09:14:07.140:   VideoMode: PAL   Temp Dir: F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\
27.11.2008 09:14:07.140:   dll version 3.3.6.5
27.11.2008 09:14:07.140:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
27.11.2008 09:14:07.156:   EstimateLayerSplitPoint()...
27.11.2008 09:14:07.156:   Splitpunkt 4271833088 auf Disk mit Größe 7558004736
27.11.2008 09:14:07.156:   Title an Stelle 0, Länge 131072, Typ 0
27.11.2008 09:14:07.156:   Title an Stelle 131072, Länge 7557873664, Typ 1
27.11.2008 09:14:07.156:   Split berechnen...
27.11.2008 09:14:07.171:   Title an Stelle 0, Länge 131072, Typ 0
27.11.2008 09:14:07.171:   Title an Stelle 131072, Länge 7557873664, Typ 1
27.11.2008 09:14:07.171:   Split in HMOVIE 4c32008, Position in Datei 4271702016
27.11.2008 09:14:07.187:   Step 1 of 4, Encodiere Film 1 ...
27.11.2008 09:14:07.187:   Eintragen des Splitpunktes 4271702016 bei ConvertMovie(4c32008)
27.11.2008 11:39:56.546:   Step 1 done
27.11.2008 11:39:56.546:   Step 2 of 4, Encodiere Filmmenü ...
27.11.2008 11:39:57.093:   Step 2 done
27.11.2008 11:39:57.109:   Step 3 of 4, Encodiere Kapitelmenü 1 ...
27.11.2008 11:39:57.500:   Step 3 done
27.11.2008 11:39:57.515:   ConvertMovie() - encoded file: F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_1.VOB
27.11.2008 11:39:57.515:   ConvertMovie() - encoded file: F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_2.VOB
27.11.2008 11:39:57.515:   ConvertMovie() - encoded file: F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_3.VOB
27.11.2008 11:39:57.531:   ConvertMovie() - encoded file: F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_4.VOB
27.11.2008 11:39:57.531:   ConvertMovie() - encoded file: F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_5.VOB
27.11.2008 11:39:57.531:   ConvertMovie() - encoded file: F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_6.VOB
27.11.2008 11:39:57.531:   ConvertMovie() - encoded file: F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_7.VOB
27.11.2008 11:39:57.531:   Step 4 of 4, Erzeuge Disc-Image ...
27.11.2008 11:49:03.218:   Step 4 done
27.11.2008 11:49:07.640:   Step 4 of 4
27.11.2008 11:49:07.640:   ---------------------------------------------------------------
27.11.2008 11:49:07.656:   CheckForLayerSplit(size=4273995776, strat=2)
27.11.2008 11:49:07.656:       Splitpunkt gesetzt auf 4268752896)
27.11.2008 11:49:07.656:       Prüfen, ob gesplittet werden muss...
27.11.2008 11:49:07.656:   ... Split notwendig
27.11.2008 11:49:07.656:   Split an Position 1047271424 im File
27.11.2008 11:49:07.671:   vorhandene Splits müssen angepaßt werden
27.11.2008 11:49:07.671:   Anpassen der bestehenden Splits...
27.11.2008 11:49:07.687:   ... F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_7.VOB -> F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_8.VOB
27.11.2008 11:49:07.718:   ... F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_6.VOB -> F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_7.VOB
27.11.2008 11:49:07.718:   ... F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_5.VOB -> F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_6.VOB
27.11.2008 11:49:07.718:   Split am Punkt 1047271424 von F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_4.VOB in
    F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_4.VOB und

F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_5.VOB
27.11.2008 11:49:11.406:   Step 4 done
27.11.2008 11:49:11.421:   ------------ InitializeBurningProcess Point ----------------
27.11.2008 11:49:11.453:   setting PoINT cache size to 16777216l
27.11.2008 11:49:11.468:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
27.11.2008 11:49:11.468:       Booktype:    DVD-ROM
27.11.2008 11:49:11.468:   setting write speed to 3324000  bytes/sec
27.11.2008 11:49:11.468:   this equals 2,400000x DVD / 18,843538x CD Speed
27.11.2008 11:49:11.484:   ------------ done: succeeded ----------------
27.11.2008 11:49:11.484:   ------------ CreateAPIProject ----------------
27.11.2008 11:49:11.484:   Step 4 of 4
27.11.2008 11:49:11.484:   creating DVD project in prepfile mode...
27.11.2008 11:49:11.531:   create volume... OK
27.11.2008 11:49:11.531:   verify option OFF
27.11.2008 11:49:11.562:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VIDEO_TS.IFO"
27.11.2008 11:49:11.562:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_1.VOB"
27.11.2008 11:49:11.562:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_2.VOB"
27.11.2008 11:49:11.562:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_3.VOB"
27.11.2008 11:49:11.578:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_4.VOB"
27.11.2008 11:49:11.578:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_5.VOB"
27.11.2008 11:49:11.578:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_6.VOB"
27.11.2008 11:49:11.593:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_7.VOB"
27.11.2008 11:49:11.593:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_8.VOB"
27.11.2008 11:49:11.593:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_0.IFO"
27.11.2008 11:49:11.609:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\VTS_01_0.VOB"
27.11.2008 11:49:11.625:   adding file "F:\Daten\Peter\MAGIX_Video_deluxe_2008_PLUS\Disc Images\DVD Image Disc_2008-11-27\content.plv"
27.11.2008 11:49:11.625:   Step 4 done
27.11.2008 11:49:11.640:   ------------ done ----------------
27.11.2008 11:49:11.640:   ------------ BurnToDisc ----------------
27.11.2008 11:49:11.640:   time: Thu Nov 27 11:49:11 2008

27.11.2008 11:49:11.640:   Step 4 of 4
27.11.2008 11:49:11.656:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
27.11.2008 11:49:11.656:       Booktype:    DVD-ROM
27.11.2008 11:49:11.656:   setting write speed to 3324000  bytes/sec
27.11.2008 11:49:11.656:   this equals 2,400000x DVD / 18,843538x CD Speed
27.11.2008 11:49:11.656:   Check on previously direct recorded session...OK
27.11.2008 11:49:11.687:   AVSDK Message - INFO: :Recording volume ...
27.11.2008 11:49:11.687:   AVSDK Message - INFO: :Recording -> setting layer boundary address for DVD+R DL ...
27.11.2008 11:49:11.718:   AVSDK Status - Begin operation Recording 3496128 sectors/frames
27.11.2008 11:49:11.718:   time: Thu Nov 27 11:49:11 2008

27.11.2008 11:49:11.718:   AVSDK Message - INFO: :Recording -> writing data ...
27.11.2008 11:49:11.734:   AVSDK Message - ERROR: :Cannot write to disc -> Required command option not supported by drive (ASC/ASCQ 24/00)
27.11.2008 11:49:11.765:   AVSDK Status - End operation Recording 3496128 sectors/frames
27.11.2008 11:49:11.765:   AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
27.11.2008 11:49:11.765:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 100 - drive not fully supported !!!
27.11.2008 11:49:11.765:   Step 4 done
27.11.2008 11:49:11.781:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 240 - drive not fully supported !!!
27.11.2008 11:49:11.781:   ------------ done ----------------
27.11.2008 11:49:11.781:   time: Thu Nov 27 11:49:11 2008

27.11.2008 11:49:11.781:   project burning failed
27.11.2008 11:49:11.812:   !!! DBK error in CBurnDevSupport::BurnProject(): 240 - drive not fully supported !!!
27.11.2008 11:49:11.859:   !!! DBK error in BurnProject: 240 - drive not fully supported !!!
27.11.2008 12:49:03.625:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive g:
27.11.2008 12:49:03.640:       DEVICE REMOVAL

Kommentare

geschi schrieb am 27.11.2008 um 13:36 Uhr
Der Brenner erkennt keine DVD DL, Firmewareupdate Letztstand ist 1.05.
Aber vorsichtig, sonst kauft einen neuen Brenner, halte dich genau an den Angaben auf der HP beim Update.
In der Bedienungsanleitung sollte stehen was er bevorzugt an Rohlingen mag.
Du kannst auch bevor du das Firmwareupdate machst, dein Video aus dem Ordner DiscImage heraus mit einen anderen Brennprogramm brennen, ob es da funktioniert, ich denke nicht.
NACHTRAG: Installiere von der Supportseite die neuesten Brennroutinen.
Ich habe dir zwei PN´s gesendet.