Warum wird nur ein Brenner zur Auswahl gestellt wenn 3 von Windows angezeigt werden.

george20253 schrieb am 22.04.2013 um 15:04 Uhr

es gelingt mir nicht eine DVD zu Brennen. Hatte mit Video Deluxe Premium 17 keine Schwierigkeiten.

Schon bei der Instrallation der Video Pro X5 war gar kein Brenner mehr ansprechbar.

Win 8 erneut installiert und netterweis wir bei Pro x5 ein Brenner erkannt.

Dieser kommt nicht zum Abschluss.

Meldung:

-------------------------- 05.04.2013 19:38:51 --------------------------

05.04.2013 19:38:51.680:   DLLAV32.DLL loaded, all entry points available
05.04.2013 19:38:51.681:   AVSDK MsgCbFunc registered
05.04.2013 19:38:51.681:   AVSDK: StatCbFunc registered
05.04.2013 19:38:51.694:   AVSDK Version 11.0.226
05.04.2013 19:38:51.695:   ------------ Reading Device Info ----------------
05.04.2013 19:38:51.695:   AVSDK: 0 device(s) found
05.04.2013 19:38:51.695:   BurnSupport: 0 device(s) found
05.04.2013 19:38:51.695:   !!! DBK error in CBurnDevSupport::ReadDeviceInfo(): 21 - no device !!!
05.04.2013 19:38:51.695:   ------------ done ----------------

-------------------------- 09.04.2013 22:46:14 --------------------------

09.04.2013 22:46:14.827:   DLLAV32.DLL loaded, all entry points available
09.04.2013 22:46:14.828:   AVSDK MsgCbFunc registered
09.04.2013 22:46:14.828:   AVSDK: StatCbFunc registered
09.04.2013 22:46:14.865:   AVSDK Message - ERROR: :Internal or unexpected error (Device type has unexpectedly changed) !
09.04.2013 22:46:14.920:   AVSDK Version 11.0.226
09.04.2013 22:46:14.920:   ------------ Reading Device Info ----------------
09.04.2013 22:46:14.920:   AVSDK: 1 device(s) found
09.04.2013 22:46:14.920:   BurnSupport: 1 device(s) found
09.04.2013 22:46:14.920:   Adapter=2  ID=0  LUN=80   G:PIONEER BD-RW   BDR-207M Revision:1.21
09.04.2013 22:46:14.921:   BurnSupport: 1 record device(s) available
09.04.2013 22:46:14.921:   BurnSupport: G: PIONEER BD-RW   BDR-207M Rev. 1.21
09.04.2013 22:46:14.921:   ------------ done ----------------
09.04.2013 22:46:15.170:   setting no speed limit
09.04.2013 22:46:15.171:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
09.04.2013 22:46:15.634:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 209 - illegal type of disc !!!

-------------------------- 22.04.2013 01:25:55 --------------------------

22.04.2013 01:25:55.556:   DLLAV32.DLL loaded, all entry points available
22.04.2013 01:25:55.560:   AVSDK MsgCbFunc registered
22.04.2013 01:25:55.560:   AVSDK: StatCbFunc registered
22.04.2013 01:25:55.562:   AVSDK Message - ERROR: :Internal or unexpected error (Device type has unexpectedly changed) !
22.04.2013 01:25:55.668:   AVSDK Version 11.0.226
22.04.2013 01:25:55.668:   ------------ Reading Device Info ----------------
22.04.2013 01:25:55.668:   AVSDK: 1 device(s) found
22.04.2013 01:25:55.669:   BurnSupport: 1 device(s) found
22.04.2013 01:25:55.669:   Adapter=2  ID=0  LUN=80   G:PIONEER BD-RW   BDR-207M Revision:1.21
22.04.2013 01:25:55.669:   BurnSupport: 1 record device(s) available
22.04.2013 01:25:55.669:   BurnSupport: G: PIONEER BD-RW   BDR-207M Rev. 1.21
22.04.2013 01:25:55.669:   ------------ done ----------------
22.04.2013 01:25:55.892:   setting no speed limit
22.04.2013 01:25:55.892:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
22.04.2013 01:26:49.173:   Open Project: Dara_and_Stephen -- dvd project 2013-04-22
22.04.2013 01:26:49.173:   VideoMode: PAL   Temp Dir: D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\
22.04.2013 01:26:49.173:   dll version 4.8.8.0
22.04.2013 01:26:49.174:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
22.04.2013 01:26:49.175:   EstimateLayerSplitPoint()...
22.04.2013 01:26:49.177:   Splitpunkt 4271833088 auf Disk mit Größe 1980628992
22.04.2013 01:26:49.177:   Title an Stelle 0, Länge 131072, Typ 0
22.04.2013 01:26:49.177:   Title an Stelle 131072, Länge 131072, Typ 0
22.04.2013 01:26:49.178:   Title an Stelle 262144, Länge 1980366848, Typ 1
22.04.2013 01:26:49.178:   ... Split möglich nach aktuellem Title, -> Abbruch
22.04.2013 01:26:49.195:   Step 1 of 6, Encodiere Film 1 ...
22.04.2013 01:26:49.196:   Step 1 done
22.04.2013 01:26:49.198:   Step 2 of 6, Encodiere Film 2 ...
22.04.2013 01:56:48.041:   Step 2 done
22.04.2013 01:56:48.043:   Step 3 of 6, Encodiere Filmmenü ...
22.04.2013 01:56:48.656:   Step 3 done
22.04.2013 01:56:48.657:   Step 4 of 6, Encodiere Kapitelmenü 1 ...
22.04.2013 01:56:54.711:   Step 4 done
22.04.2013 01:56:54.716:   ConvertMovie() - encoded file: D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_1.VOB
22.04.2013 01:56:54.716:   ConvertMovie() - encoded file: D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_2.VOB
22.04.2013 01:56:54.749:   Step 5 of 6, Disc Image wird erzeugt...
22.04.2013 01:57:02.389:   Step 5 done
22.04.2013 01:57:09.128:   Step 6 of 6
22.04.2013 01:57:09.129:   Step 6 done
22.04.2013 01:57:09.526:   requested recorder feature:
22.04.2013 01:57:09.527:    cache size:       16,000000.1 MB
22.04.2013 01:57:09.527:    write speed:      5410,156250.1 KB/s
22.04.2013 01:57:09.527:    book type:        0
22.04.2013 01:57:09.527:    burn over:        no
22.04.2013 01:57:09.527:    simulate:         no
22.04.2013 01:57:09.527:    disc at once:     no
22.04.2013 01:57:09.528:    burn proof:       yes
22.04.2013 01:57:09.528:    format disc:      no
22.04.2013 01:57:09.528:    short leadout:    no
22.04.2013 01:57:09.528:    no defect mgmt:   no
22.04.2013 01:57:09.528:    verify after burn:no
22.04.2013 01:57:09.528:   ------------ OpenRecorderSetOptions Point ----------------
22.04.2013 01:57:09.716:   setting PoINT cache size to 16777216l
22.04.2013 01:57:09.748:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
22.04.2013 01:57:09.748:    Booktype: don't care
22.04.2013 01:57:09.765:   setting write speed to 5540000  bytes/sec
22.04.2013 01:57:09.765:   this equals 4,000000x DVD / 31,405895x CD Speed
22.04.2013 01:57:09.765:   ------------ done: succeeded ----------------
22.04.2013 01:57:09.766:   ------------ CreateAPIProject ----------------
22.04.2013 01:57:09.766:   Step 6 of 6
22.04.2013 01:57:09.767:   creating DVD project in prepfile mode...
22.04.2013 01:57:09.770:   create volume... OK
22.04.2013 01:57:09.770:   verify option OFF
22.04.2013 01:57:09.770:   set project options... OK
22.04.2013 01:57:09.770:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VIDEO_TS.IFO"
22.04.2013 01:57:09.771:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VIDEO_TS.VOB"
22.04.2013 01:57:09.867:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_1.VOB"
22.04.2013 01:57:09.868:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_2.VOB"
22.04.2013 01:57:09.869:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_0.IFO"
22.04.2013 01:57:09.869:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_0.VOB"
22.04.2013 01:57:09.870:   Step 6 done
22.04.2013 01:57:09.871:   ------------ done ----------------
22.04.2013 01:57:09.871:   Step 6 of 6
22.04.2013 01:57:09.872:   ------------ BurnToDisc ----------------
22.04.2013 01:57:09.964:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
22.04.2013 01:57:09.964:    Booktype: don't care
22.04.2013 01:57:09.964:   setting write speed to 5540000  bytes/sec
22.04.2013 01:57:09.964:   this equals 4,000000x DVD / 31,405895x CD Speed
22.04.2013 01:57:09.964:   mounting volume on device...OK
22.04.2013 01:57:09.965:   Check on previously direct recorded session...OK
22.04.2013 01:57:09.965:   -- Volume mounted --
22.04.2013 01:57:09.965:   -- Recording on "G: PIONEER BD-RW   BDR-207M" --
22.04.2013 01:57:09.965:   -- Medium is "DVD-R" --
22.04.2013 01:57:09.965:   -- Manufacturer "MCC 03RG20" --
22.04.2013 01:57:10.027:   AVSDK Message - INFO: :Recording volume ...
22.04.2013 01:57:10.027:   AVSDK Status - Begin operation Recording 911440 sectors/frames
22.04.2013 01:57:10.028:   AVSDK Message - INFO: :Recording -> writing data ...
22.04.2013 01:57:14.478:   wrote LeadIn, start DataCopy
22.04.2013 01:57:53.537:   AVSDK Message - ERROR: :Cannot write to disc -> Logical block address out of range (SK/ASC/ASCQ 05/21/02)
22.04.2013 01:58:03.845:   AVSDK Status - End operation Recording 911440 sectors/frames
22.04.2013 01:58:03.846:   AVSDK Message - INFO: :Recording failed due to write error on disc
22.04.2013 01:58:03.846:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
22.04.2013 01:58:03.846:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 224 - write error occurred on disc !!!
22.04.2013 01:58:03.846:   ------------ done ----------------
22.04.2013 01:58:03.846:   Step 6 done
22.04.2013 01:58:03.847:   project burning failed
22.04.2013 01:58:03.855:   !!! DBK error in CBurnDevSupport::BurnProject(): 224 - write error occurred on disc !!!
22.04.2013 01:58:03.858:   !!! DBK error in BurnProject: 224 - write error occurred on disc !!!
22.04.2013 02:11:24.739:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive g:
22.04.2013 02:11:24.740:    DEVICE REMOVAL

-------------------------- 22.04.2013 02:14:28 --------------------------

22.04.2013 02:14:28.036:   DLLAV32.DLL loaded, all entry points available
22.04.2013 02:14:28.037:   AVSDK MsgCbFunc registered
22.04.2013 02:14:28.037:   AVSDK: StatCbFunc registered
22.04.2013 02:14:28.038:   AVSDK Version 11.0.226
22.04.2013 02:14:28.038:   ------------ Reading Device Info ----------------
22.04.2013 02:14:28.038:   AVSDK: 1 device(s) found
22.04.2013 02:14:28.038:   BurnSupport: 1 device(s) found
22.04.2013 02:14:28.038:   Adapter=2  ID=0  LUN=80   G:PIONEER BD-RW   BDR-207M Revision:1.21
22.04.2013 02:14:28.039:   BurnSupport: 1 record device(s) available
22.04.2013 02:14:28.039:   BurnSupport: G: PIONEER BD-RW   BDR-207M Rev. 1.21
22.04.2013 02:14:28.039:   ------------ done ----------------
22.04.2013 02:14:28.255:   setting no speed limit
22.04.2013 02:14:28.256:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
22.04.2013 02:14:28.749:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
22.04.2013 02:14:52.532:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
22.04.2013 02:15:15.286:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive g:
22.04.2013 02:15:15.286:    DEVICE REMOVAL
22.04.2013 02:15:36.564:   setting no speed limit
22.04.2013 02:15:46.578:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive g:
22.04.2013 02:15:46.578:    DEVICE ARRIVED
22.04.2013 02:15:47.205:   AVSDK Message - WARNING: :Out of licenses in AvVolCreate*()
22.04.2013 02:15:47.205:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolCreate(): 1 - operation can not be performed now !!!
22.04.2013 02:16:15.937:   Open Project: Dara_and_Stephen -- dvd project 2013-04-22
22.04.2013 02:16:15.937:   VideoMode: PAL   Temp Dir: D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\
22.04.2013 02:16:15.937:   dll version 4.8.8.0
22.04.2013 02:16:15.938:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
22.04.2013 02:16:15.938:   EstimateLayerSplitPoint()...
22.04.2013 02:16:15.941:   Splitpunkt 4271833088 auf Disk mit Größe 1977352192
22.04.2013 02:16:15.941:   Title an Stelle 0, Länge 131072, Typ 0
22.04.2013 02:16:15.941:   Title an Stelle 131072, Länge 131072, Typ 0
22.04.2013 02:16:15.941:   Title an Stelle 262144, Länge 1977090048, Typ 1
22.04.2013 02:16:15.942:   ... Split möglich nach aktuellem Title, -> Abbruch
22.04.2013 02:16:22.426:   Step 1 of 6, Encodiere Film 1 ...
22.04.2013 02:16:22.427:   Step 1 done
22.04.2013 02:16:22.428:   Step 2 of 6, Encodiere Film 2 ...
22.04.2013 02:46:17.171:   Step 2 done
22.04.2013 02:46:17.173:   Step 3 of 6, Encodiere Filmmenü ...
22.04.2013 02:46:17.568:   Step 3 done
22.04.2013 02:46:17.569:   Step 4 of 6, Encodiere Kapitelmenü 1 ...
22.04.2013 02:46:23.831:   Step 4 done
22.04.2013 02:46:23.835:   ConvertMovie() - encoded file: D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_1.VOB
22.04.2013 02:46:23.835:   ConvertMovie() - encoded file: D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_2.VOB
22.04.2013 02:46:23.869:   Step 5 of 6, Disc Image wird erzeugt...
22.04.2013 02:46:48.863:   Step 5 done
22.04.2013 02:46:55.621:   Step 6 of 6
22.04.2013 02:46:55.622:   Step 6 done
22.04.2013 02:46:55.729:   requested recorder feature:
22.04.2013 02:46:55.730:    cache size:       16,000000.1 MB
22.04.2013 02:46:55.730:    write speed:      5410,156250.1 KB/s
22.04.2013 02:46:55.730:    book type:        0
22.04.2013 02:46:55.730:    burn over:        no
22.04.2013 02:46:55.730:    simulate:         no
22.04.2013 02:46:55.730:    disc at once:     no
22.04.2013 02:46:55.730:    burn proof:       yes
22.04.2013 02:46:55.731:    format disc:      no
22.04.2013 02:46:55.731:    short leadout:    no
22.04.2013 02:46:55.731:    no defect mgmt:   no
22.04.2013 02:46:55.731:    verify after burn:no
22.04.2013 02:46:55.731:   ------------ OpenRecorderSetOptions Point ----------------
22.04.2013 02:46:55.951:   setting PoINT cache size to 16777216l
22.04.2013 02:46:55.955:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
22.04.2013 02:46:55.955:    Booktype: don't care
22.04.2013 02:46:55.972:   setting write speed to 5540000  bytes/sec
22.04.2013 02:46:55.972:   this equals 4,000000x DVD / 31,405895x CD Speed
22.04.2013 02:46:55.972:   ------------ done: succeeded ----------------
22.04.2013 02:46:55.973:   ------------ CreateAPIProject ----------------
22.04.2013 02:46:55.973:   Step 6 of 6
22.04.2013 02:46:55.974:   creating DVD project in prepfile mode...
22.04.2013 02:46:55.976:   create volume... OK
22.04.2013 02:46:55.977:   verify option OFF
22.04.2013 02:46:55.977:   set project options... OK
22.04.2013 02:46:55.977:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VIDEO_TS.IFO"
22.04.2013 02:46:55.978:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VIDEO_TS.VOB"
22.04.2013 02:46:55.979:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_1.VOB"
22.04.2013 02:46:56.059:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_2.VOB"
22.04.2013 02:46:56.060:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_0.IFO"
22.04.2013 02:46:56.060:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_0.VOB"
22.04.2013 02:46:56.061:   Step 6 done
22.04.2013 02:46:56.062:   ------------ done ----------------
22.04.2013 02:46:56.062:   Step 6 of 6
22.04.2013 02:46:56.063:   ------------ BurnToDisc ----------------
22.04.2013 02:46:56.166:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
22.04.2013 02:46:56.166:    Booktype: don't care
22.04.2013 02:46:56.167:   setting write speed to 5540000  bytes/sec
22.04.2013 02:46:56.167:   this equals 4,000000x DVD / 31,405895x CD Speed
22.04.2013 02:46:56.167:   mounting volume on device...OK
22.04.2013 02:46:56.167:   Check on previously direct recorded session...OK
22.04.2013 02:46:56.167:   -- Volume mounted --
22.04.2013 02:46:56.167:   -- Recording on "G: PIONEER BD-RW   BDR-207M" --
22.04.2013 02:46:56.168:   -- Medium is "DVD-R" --
22.04.2013 02:46:56.168:   -- Manufacturer "MCC 03RG20" --
22.04.2013 02:46:56.220:   AVSDK Message - INFO: :Recording volume ...
22.04.2013 02:46:56.220:   AVSDK Status - Begin operation Recording 909936 sectors/frames
22.04.2013 02:46:56.221:   AVSDK Message - INFO: :Recording -> writing data ...
22.04.2013 02:47:03.106:   wrote LeadIn, start DataCopy
22.04.2013 02:47:42.071:   AVSDK Message - ERROR: :Cannot write to disc -> Logical block address out of range (SK/ASC/ASCQ 05/21/02)
22.04.2013 02:47:52.381:   AVSDK Status - End operation Recording 909936 sectors/frames
22.04.2013 02:47:52.381:   AVSDK Message - INFO: :Recording failed due to write error on disc
22.04.2013 02:47:52.381:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
22.04.2013 02:47:52.382:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 224 - write error occurred on disc !!!
22.04.2013 02:47:52.382:   ------------ done ----------------
22.04.2013 02:47:52.382:   Step 6 done
22.04.2013 02:47:52.383:   project burning failed
22.04.2013 02:47:52.390:   !!! DBK error in CBurnDevSupport::BurnProject(): 224 - write error occurred on disc !!!
22.04.2013 02:47:52.393:   !!! DBK error in BurnProject: 224 - write error occurred on disc !!!
22.04.2013 03:00:40.228:   AVSDK Message - ERROR: :Cannot open drive -> error code 14
22.04.2013 03:00:40.228:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 3 - bad address given as parameter !!!
22.04.2013 03:00:40.228:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 202 - bad address given as parameter !!!
22.04.2013 03:00:59.514:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
22.04.2013 03:00:59.514:   !!! AVSDK error: OpenCloseTray() calling AvDevControl(): 5 - request not allowed !!!
22.04.2013 03:01:57.088:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
22.04.2013 03:01:57.088:   !!! AVSDK error: OpenCloseTray() calling AvDevControl(): 5 - request not allowed !!!
22.04.2013 03:01:57.093:   AVSDK Message - ERROR: :Cannot open drive -> error code 14
22.04.2013 03:01:57.094:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 3 - bad address given as parameter !!!
22.04.2013 03:01:57.094:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 202 - bad address given as parameter !!!
22.04.2013 03:01:59.896:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!

-------------------------- 22.04.2013 13:42:51 --------------------------

22.04.2013 13:42:51.270:   DLLAV32.DLL loaded, all entry points available
22.04.2013 13:42:51.270:   AVSDK MsgCbFunc registered
22.04.2013 13:42:51.271:   AVSDK: StatCbFunc registered
22.04.2013 13:42:51.272:   AVSDK Message - ERROR: :Internal or unexpected error (Device type has unexpectedly changed) !
22.04.2013 13:42:51.364:   AVSDK Version 11.0.226
22.04.2013 13:42:51.364:   ------------ Reading Device Info ----------------
22.04.2013 13:42:51.365:   AVSDK: 1 device(s) found
22.04.2013 13:42:51.377:   BurnSupport: 1 device(s) found
22.04.2013 13:42:51.377:   Adapter=2  ID=0  LUN=80   G:PIONEER BD-RW   BDR-207M Revision:1.21
22.04.2013 13:42:51.377:   BurnSupport: 1 record device(s) available
22.04.2013 13:42:51.378:   BurnSupport: G: PIONEER BD-RW   BDR-207M Rev. 1.21
22.04.2013 13:42:51.378:   ------------ done ----------------
22.04.2013 13:42:51.588:   setting no speed limit
22.04.2013 13:42:51.589:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
22.04.2013 13:42:51.673:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/02)
22.04.2013 13:42:51.674:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
22.04.2013 13:42:51.674:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
22.04.2013 13:44:23.651:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive g:
22.04.2013 13:44:23.651:    DEVICE ARRIVED
22.04.2013 13:52:08.632:   setting no speed limit
22.04.2013 13:52:51.144:   Open Project: Dara_and_Stephen -- dvd project 2013-04-22
22.04.2013 13:52:51.144:   VideoMode: PAL   Temp Dir: D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\
22.04.2013 13:52:51.145:   dll version 4.8.8.0
22.04.2013 13:52:51.146:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
22.04.2013 13:52:51.146:   EstimateLayerSplitPoint()...
22.04.2013 13:52:51.149:   Splitpunkt 4271833088 auf Disk mit Größe 1923547136
22.04.2013 13:52:51.149:   Title an Stelle 0, Länge 131072, Typ 0
22.04.2013 13:52:51.149:   Title an Stelle 131072, Länge 131072, Typ 0
22.04.2013 13:52:51.149:   Title an Stelle 262144, Länge 1923284992, Typ 1
22.04.2013 13:52:51.149:   ... Split möglich nach aktuellem Title, -> Abbruch
22.04.2013 13:53:09.937:   Step 1 of 6, Encodiere Film 1 ...
22.04.2013 13:53:09.938:   Step 1 done
22.04.2013 13:53:09.939:   Step 2 of 6, Encodiere Film 2 ...
22.04.2013 14:22:02.051:   Step 2 done
22.04.2013 14:22:02.053:   Step 3 of 6, Encodiere Filmmenü ...
22.04.2013 14:22:02.448:   Step 3 done
22.04.2013 14:22:02.449:   Step 4 of 6, Encodiere Kapitelmenü 1 ...
22.04.2013 14:22:08.846:   Step 4 done
22.04.2013 14:22:08.851:   ConvertMovie() - encoded file: D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_1.VOB
22.04.2013 14:22:08.851:   ConvertMovie() - encoded file: D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_2.VOB
22.04.2013 14:22:08.881:   Step 5 of 6, Disc Image wird erzeugt...
22.04.2013 14:22:14.666:   Step 5 done
22.04.2013 14:22:21.372:   Step 6 of 6
22.04.2013 14:22:21.373:   Step 6 done
22.04.2013 14:22:21.391:   requested recorder feature:
22.04.2013 14:22:21.391:    cache size:       16,000000.1 MB
22.04.2013 14:22:21.391:    write speed:      10820,312500.1 KB/s
22.04.2013 14:22:21.391:    book type:        0
22.04.2013 14:22:21.392:    burn over:        no
22.04.2013 14:22:21.392:    simulate:         no
22.04.2013 14:22:21.392:    disc at once:     no
22.04.2013 14:22:21.392:    burn proof:       yes
22.04.2013 14:22:21.392:    format disc:      no
22.04.2013 14:22:21.392:    short leadout:    no
22.04.2013 14:22:21.393:    no defect mgmt:   no
22.04.2013 14:22:21.393:    verify after burn:no
22.04.2013 14:22:21.393:   ------------ OpenRecorderSetOptions Point ----------------
22.04.2013 14:22:21.572:   setting PoINT cache size to 16777216l
22.04.2013 14:22:21.598:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
22.04.2013 14:22:21.598:    Booktype: don't care
22.04.2013 14:22:21.616:   setting write speed to 11080000  bytes/sec
22.04.2013 14:22:21.616:   this equals 8,000000x DVD / 62,811790x CD Speed
22.04.2013 14:22:21.616:   ------------ done: succeeded ----------------
22.04.2013 14:22:21.616:   ------------ CreateAPIProject ----------------
22.04.2013 14:22:21.617:   Step 6 of 6
22.04.2013 14:22:21.618:   creating DVD project in prepfile mode...
22.04.2013 14:22:21.620:   create volume... OK
22.04.2013 14:22:21.620:   verify option OFF
22.04.2013 14:22:21.620:   set project options... OK
22.04.2013 14:22:21.621:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VIDEO_TS.IFO"
22.04.2013 14:22:21.621:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VIDEO_TS.VOB"
22.04.2013 14:22:21.700:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_1.VOB"
22.04.2013 14:22:21.701:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_2.VOB"
22.04.2013 14:22:21.702:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_0.IFO"
22.04.2013 14:22:21.703:   adding file "D:\MAGIX\Video Pro X5\Benutzerdateien\Disc Images\DVD Image Dara_and_Stephen\VTS_01_0.VOB"
22.04.2013 14:22:21.704:   Step 6 done
22.04.2013 14:22:21.704:   ------------ done ----------------
22.04.2013 14:22:21.704:   Step 6 of 6
22.04.2013 14:22:21.705:   ------------ BurnToDisc ----------------
22.04.2013 14:22:21.814:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
22.04.2013 14:22:21.814:    Booktype: don't care
22.04.2013 14:22:21.814:   setting write speed to 11080000  bytes/sec
22.04.2013 14:22:21.814:   this equals 8,000000x DVD / 62,811790x CD Speed
22.04.2013 14:22:21.814:   mounting volume on device...OK
22.04.2013 14:22:21.815:   Check on previously direct recorded session...OK
22.04.2013 14:22:21.815:   -- Volume mounted --
22.04.2013 14:22:21.815:   -- Recording on "G: PIONEER BD-RW   BDR-207M" --
22.04.2013 14:22:21.815:   -- Medium is "DVD-R" --
22.04.2013 14:22:21.815:   -- Manufacturer "MCC 03RG20" --
22.04.2013 14:22:21.868:   AVSDK Message - INFO: :Recording volume ...
22.04.2013 14:22:21.868:   AVSDK Status - Begin operation Recording 885376 sectors/frames
22.04.2013 14:22:21.869:   AVSDK Message - INFO: :Recording -> writing data ...
22.04.2013 14:22:29.360:   wrote LeadIn, start DataCopy
22.04.2013 14:23:03.544:   AVSDK Message - ERROR: :Cannot write to disc -> Logical block address out of range (SK/ASC/ASCQ 05/21/02)
22.04.2013 14:23:13.834:   AVSDK Status - End operation Recording 885376 sectors/frames
22.04.2013 14:23:13.834:   AVSDK Message - INFO: :Recording failed due to write error on disc
22.04.2013 14:23:13.835:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
22.04.2013 14:23:13.835:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 224 - write error occurred on disc !!!
22.04.2013 14:23:13.835:   ------------ done ----------------
22.04.2013 14:23:13.835:   Step 6 done
22.04.2013 14:23:13.836:   project burning failed
22.04.2013 14:23:13.843:   !!! DBK error in CBurnDevSupport::BurnProject(): 224 - write error occurred on disc !!!
22.04.2013 14:23:13.846:   !!! DBK error in BurnProject: 224 - write error occurred on disc !!!

...............................

So habe ich nun also 4 DVD's zerschossen.

 

Kommentare

george20253 schrieb am 22.04.2013 um 22:40 Uhr

Danke für diesen Tip.

Werde ich wohl noch versuchen müssen. Im Explorer sind die Brennerlaufwerke ja bekannt. Blue-Rays und Datensicherung konnte ich schon mit Magix  Pro X5 ja schon brennen.

Die einfache Erstellung von DVD findet nicht statt.

seine letzten Worte sind immer:

22.04.2013 14:22:21.704:   Step 6 done
22.04.2013 14:22:21.704:   ------------ done ----------------
22.04.2013 14:22:21.704:   Step 6 of 6
22.04.2013 14:22:21.705:   ------------ BurnToDisc ----------------
22.04.2013 14:22:21.814:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
22.04.2013 14:22:21.814:    Booktype: don't care
22.04.2013 14:22:21.814:   setting write speed to 11080000  bytes/sec
22.04.2013 14:22:21.814:   this equals 8,000000x DVD / 62,811790x CD Speed
22.04.2013 14:22:21.814:   mounting volume on device...OK
22.04.2013 14:22:21.815:   Check on previously direct recorded session...OK
22.04.2013 14:22:21.815:   -- Volume mounted --
22.04.2013 14:22:21.815:   -- Recording on "G: PIONEER BD-RW   BDR-207M" --
22.04.2013 14:22:21.815:   -- Medium is "DVD-R" --
22.04.2013 14:22:21.815:   -- Manufacturer "MCC 03RG20" --
22.04.2013 14:22:21.868:   AVSDK Message - INFO: :Recording volume ...
22.04.2013 14:22:21.868:   AVSDK Status - Begin operation Recording 885376 sectors/frames
22.04.2013 14:22:21.869:   AVSDK Message - INFO: :Recording -> writing data ...
22.04.2013 14:22:29.360:   wrote LeadIn, start DataCopy
22.04.2013 14:23:03.544:   AVSDK Message - ERROR: :Cannot write to disc -> Logical block address out of range (SK/ASC/ASCQ 05/21/02)
22.04.2013 14:23:13.834:   AVSDK Status - End operation Recording 885376 sectors/frames
22.04.2013 14:23:13.834:   AVSDK Message - INFO: :Recording failed due to write error on disc
22.04.2013 14:23:13.835:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
22.04.2013 14:23:13.835:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 224 - write error occurred on disc !!!
22.04.2013 14:23:13.835:   ------------ done ----------------
22.04.2013 14:23:13.835:   Step 6 done
22.04.2013 14:23:13.836:   project burning failed
22.04.2013 14:23:13.843:   !!! DBK error in CBurnDevSupport::BurnProject(): 224 - write error occurred on disc !!!
22.04.2013 14:23:13.846:   !!! DBK error in BurnProject: 224 - write error occurred on disc !!!

george20253 schrieb am 23.04.2013 um 12:36 Uhr

Danke für die Geduld. Habe das gemacht. Chipset und Bios. Alles von Magix de und wieder neu installiert. Dachte eventuell dürfen Video Deluxe und Pro X nicht gemeinsam auf dem Rechner sein. Resultat: Nur ein Brenner wird im Brennprogramm angezeigt und der bricht beim Brennen auf die DVD ab. Wie das alternativ mit dem Image Brenner funktioniert habe ich noch nicht probiert. Dieser Weg erscheint mir mehr so wie Computer zu Fuß :-)

 

george20253 schrieb am 13.05.2013 um 03:19 Uhr

Es hat sich gezeigt, daß man mit Magix Pro X 5 nur  DVD+R und BR mit dem Pioneer BDR-207EBK DVD's brennen kann.

Der Brenner hat alle die Möglichkeit alle möglichen DVD's und BR zu beschreiben.

Windows erkennt alle meine Brenner. und Nero 12 kennt sich ebenfalls.

Bei Magix ist trotz sämtlicher Neuinstallation 8Win (Bios/MAINBOARD) nur ein Brenner von  3 möglichen aufgelistet.