Servus,

habe Probleme beim Encodieren. Nach dem Vorgang gibt mir die Software nun schon zum x-ten mal einen Error.

Auch bei der Bearbeitung hatte ich Probleme, die ich vor der Version 18.0.1.209 (UPD3) nicht hatte --> Vorschaumonitor friert ein, Musik spielt weiter.

Habe auch schon die Suchfunktion belästigt - neu gestartet... habe ich gemacht - Schnellstartfunktion aus... habe ich gemacht.

Bitte helft mir... - Frage noch dazu: könnte ich wieder "meine" vorangegangene Version haben?

Danke im Voraus - Liebe Grüße  -  der Peppi

Anbei der File:

-------------------------- 15.08.2018 16:20:45 --------------------------

15.08.2018 16:20:45.647:   DLLAV32.DLL loaded, all entry points available
15.08.2018 16:20:45.784:   AVSDK MsgCbFunc registered
15.08.2018 16:20:45.785:   AVSDK: StatCbFunc registered
15.08.2018 16:20:48.004:   AVSDK Version 13.0.247
15.08.2018 16:20:48.006:   ------------ Reading Device Info ----------------
15.08.2018 16:20:48.008:   AVSDK: 1 device(s) found
15.08.2018 16:20:48.015:   BurnSupport: 1 device(s) found
15.08.2018 16:20:48.017:   Adapter=0  ID=0  LUN=16   E:hp DVDRW  DU8A5SHL Revision:ZH63
15.08.2018 16:20:48.018:   BurnSupport: 1 record device(s) available
15.08.2018 16:20:48.020:   BurnSupport: E: hp DVDRW  DU8A5SHL Rev. ZH63
15.08.2018 16:20:48.022:   ------------ done ----------------

-------------------------- 15.08.2018 16:22:25 --------------------------

15.08.2018 16:22:25.944:   DLLAV32.DLL loaded, all entry points available
15.08.2018 16:22:25.948:   AVSDK MsgCbFunc registered
15.08.2018 16:22:25.950:   AVSDK: StatCbFunc registered
15.08.2018 16:22:27.820:   AVSDK Version 13.0.247
15.08.2018 16:22:27.823:   ------------ Reading Device Info ----------------
15.08.2018 16:22:27.827:   AVSDK: 1 device(s) found
15.08.2018 16:22:27.832:   BurnSupport: 1 device(s) found
15.08.2018 16:22:27.836:   Adapter=0  ID=0  LUN=16   E:hp DVDRW  DU8A5SHL Revision:ZH63
15.08.2018 16:22:27.840:   BurnSupport: 1 record device(s) available
15.08.2018 16:22:27.843:   BurnSupport: E: hp DVDRW  DU8A5SHL Rev. ZH63
15.08.2018 16:22:27.847:   ------------ done ----------------

-------------------------- 03.11.2018 19:03:41 --------------------------

03.11.2018 19:03:41.140:   DLLAV32.DLL loaded, all entry points available
03.11.2018 19:03:41.218:   AVSDK MsgCbFunc registered
03.11.2018 19:03:41.234:   AVSDK: StatCbFunc registered
03.11.2018 19:03:42.640:   AVSDK Version 13.0.247
03.11.2018 19:03:42.640:   ------------ Reading Device Info ----------------
03.11.2018 19:03:42.640:   AVSDK: 2 device(s) found
03.11.2018 19:03:42.640:   BurnSupport: 2 device(s) found
03.11.2018 19:03:42.656:   Adapter=0  ID=0  LUN=16   E:hp DVDRW  DU8A5SHL Revision:ZH63
03.11.2018 19:03:42.656:   Adapter=255  ID=2  LUN=0   F:HL-DT-ST BD-RE BP40NS20 Revision:ML01
03.11.2018 19:03:42.656:   BurnSupport: 2 record device(s) available
03.11.2018 19:03:42.671:   BurnSupport: E: hp DVDRW  DU8A5SHL Rev. ZH63
03.11.2018 19:03:42.671:   BurnSupport: F: HL-DT-ST BD-RE BP40NS20 Rev. ML01
03.11.2018 19:03:42.671:   ------------ done ----------------
03.11.2018 19:03:43.343:   setting no speed limit
03.11.2018 19:03:43.343:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
03.11.2018 19:03:43.437:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
03.11.2018 19:03:43.453:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
03.11.2018 19:03:43.453:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
03.11.2018 19:03:54.358:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
03.11.2018 19:03:54.358:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
03.11.2018 19:03:54.358:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
03.11.2018 19:03:56.499:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
03.11.2018 19:03:56.499:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
03.11.2018 19:03:56.499:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
03.11.2018 19:03:56.561:   Open Project: Kalabrien_2018 -- bd project 2018-11-03
03.11.2018 19:03:56.577:   VideoMode: PAL   Temp Dir: C:\Users\Stefan\Documents\MAGIX\Video deluxe Plus\Disc Images\
03.11.2018 19:03:56.577:   dll version 6.0.10.2424
03.11.2018 19:03:56.592:   Step 1 of 5, Encodiere Film 1 ...
03.11.2018 19:04:32.851:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
03.11.2018 19:04:38.194:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
03.11.2018 19:04:40.413:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
03.11.2018 19:06:37.687:   setting no speed limit
03.11.2018 19:06:42.156:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
03.11.2018 19:06:58.936:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
03.11.2018 19:07:01.154:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
03.11.2018 19:08:25.794:   setting no speed limit
03.11.2018 19:08:30.247:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
03.11.2018 19:09:14.791:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
03.11.2018 19:09:17.025:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system

-------------------------- 03.11.2018 19:11:56 --------------------------

03.11.2018 19:11:56.954:   DLLAV32.DLL loaded, all entry points available
03.11.2018 19:11:56.954:   AVSDK MsgCbFunc registered
03.11.2018 19:11:56.954:   AVSDK: StatCbFunc registered
03.11.2018 19:11:56.970:   AVSDK Version 13.0.247
03.11.2018 19:11:56.970:   ------------ Reading Device Info ----------------
03.11.2018 19:11:56.970:   AVSDK: 2 device(s) found
03.11.2018 19:11:56.970:   BurnSupport: 2 device(s) found
03.11.2018 19:11:56.970:   Adapter=0  ID=0  LUN=16   E:hp DVDRW  DU8A5SHL Revision:ZH63
03.11.2018 19:11:56.970:   Adapter=255  ID=2  LUN=0   F:HL-DT-ST BD-RE BP40NS20 Revision:ML01
03.11.2018 19:11:56.970:   BurnSupport: 2 record device(s) available
03.11.2018 19:11:56.970:   BurnSupport: E: hp DVDRW  DU8A5SHL Rev. ZH63
03.11.2018 19:11:56.985:   BurnSupport: F: HL-DT-ST BD-RE BP40NS20 Rev. ML01
03.11.2018 19:11:56.985:   ------------ done ----------------
03.11.2018 19:11:57.345:   setting no speed limit
03.11.2018 19:11:57.345:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
03.11.2018 19:12:01.813:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
03.11.2018 19:12:06.891:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
03.11.2018 19:12:32.036:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
03.11.2018 19:12:34.239:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
03.11.2018 19:12:34.301:   Open Project: Kalabrien_2018 -- bd project 2018-11-03
03.11.2018 19:12:34.301:   VideoMode: PAL   Temp Dir: C:\Users\Stefan\Documents\MAGIX\Video deluxe Plus\Disc Images\
03.11.2018 19:12:34.301:   dll version 6.0.10.2424
03.11.2018 19:12:34.332:   Step 1 of 5, Encodiere Film 1 ...
03.11.2018 19:42:36.442:   Step 1 done
03.11.2018 19:42:36.536:   Step 2 of 5, Encodiere Filmmenü ...
03.11.2018 19:42:38.194:   Step 2 done
03.11.2018 19:42:38.210:   Step 3 of 5, Encodiere Kapitelmenü 1 ...
03.11.2018 19:42:38.210:   Step 3 done
03.11.2018 19:42:38.272:   ConvertMovie() - encoded file: C:\Users\Stefan\Documents\MAGIX\Video deluxe Plus\Disc Images\BD H264 Image Kalabrien_2018\BDMV\STREAM\00000.m2ts
03.11.2018 19:42:38.319:   Step 4 of 5, Disc Image wird erzeugt...
03.11.2018 19:42:38.319:  
MDA reports error 32 - cannot find procedure ErrorToString in mdabase_x64.dll

03.11.2018 19:46:46.905:   Step 4 done
03.11.2018 19:46:46.921:   ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
03.11.2018 19:46:46.936:   !!! DBK error in BurnProject: 10 - movie encoding failed !!!
03.11.2018 19:47:00.379:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
03.11.2018 19:47:02.597:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
03.11.2018 19:47:02.644:   Open Project: Kalabrien_2018 -- bd project 2018-11-03
03.11.2018 19:47:02.644:   VideoMode: PAL   Temp Dir: C:\Users\Stefan\Documents\MAGIX\Video deluxe Plus\Disc Images\
03.11.2018 19:47:02.660:   dll version 6.0.10.2424
03.11.2018 19:47:05.488:   Open Project: temp -- bd project
03.11.2018 19:47:05.488:   VideoMode: PAL   Temp Dir: C:\Users\Stefan\Documents\MAGIX\Video deluxe Plus\Disc Images\BD H264 Image Kalabrien_2018\
03.11.2018 19:47:05.488:   Step 1 of 5, Encodiere Film 1 ...
03.11.2018 19:47:05.503:   Step 1 done
03.11.2018 19:47:05.581:   Step 2 of 5, Encodiere Filmmenü ...
03.11.2018 19:47:07.397:   Step 2 done
03.11.2018 19:47:07.397:   Step 3 of 5, Encodiere Kapitelmenü 1 ...
03.11.2018 19:47:07.413:   Step 3 done
03.11.2018 19:47:07.444:   ConvertMovie() - encoded file: C:\Users\Stefan\Documents\MAGIX\Video deluxe Plus\Disc Images\BD H264 Image Kalabrien_2018\BDMV\STREAM\00000.m2ts
03.11.2018 19:47:07.513:   Step 4 of 5, Disc Image wird erzeugt...
03.11.2018 19:47:07.528:  
MDA reports error 32 - cannot find procedure ErrorToString in mdabase_x64.dll

03.11.2018 19:47:13.136:   Step 4 done
03.11.2018 19:47:13.152:   ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
03.11.2018 19:47:13.167:   !!! DBK error in BurnProject: 10 - movie encoding failed !!!
03.11.2018 19:47:16.429:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
03.11.2018 19:47:18.617:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
03.11.2018 19:47:18.664:   Open Project: Kalabrien_2018 -- bd project 2018-11-03
03.11.2018 19:47:18.664:   VideoMode: PAL   Temp Dir: C:\Users\Stefan\Documents\MAGIX\Video deluxe Plus\Disc Images\
03.11.2018 19:47:18.664:   dll version 6.0.10.2424
03.11.2018 19:47:21.773:   Step 1 of 5, Encodiere Film 1 ...
03.11.2018 20:15:54.997:   Step 1 done
03.11.2018 20:15:55.060:   Step 2 of 5, Encodiere Filmmenü ...
03.11.2018 20:15:56.914:   Step 2 done
03.11.2018 20:15:56.914:   Step 3 of 5, Encodiere Kapitelmenü 1 ...
03.11.2018 20:15:56.929:   Step 3 done
03.11.2018 20:15:56.960:   ConvertMovie() - encoded file: C:\Users\Stefan\Documents\MAGIX\Video deluxe Plus\Disc Images\BD H264 Image Kalabrien_2018\BDMV\STREAM\00000.m2ts
03.11.2018 20:15:56.992:   Step 4 of 5, Disc Image wird erzeugt...
03.11.2018 20:15:57.007:  
MDA reports error 32 - cannot find procedure ErrorToString in mdabase_x64.dll

03.11.2018 20:32:49.596:   Step 4 done
03.11.2018 20:32:49.612:   ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
03.11.2018 20:32:49.627:   !!! DBK error in BurnProject: 10 - movie encoding failed !!!