movie encoding failed

Wolve schrieb am 10.02.2020 um 00:21 Uhr

Hallo allerseits,

meine Ausgangslage:

verwendetes Material - fotos: Full HD (1920x1080) / videos: mov-Dateien Full HD mit 60B/s -.- auf Anraten habe ich, via XMediaRecode, auf < mp4 > (Audio: AAC) umgeswitched; im Film z.T. TS (Timestretching auf 50B/s)

Getreu dem Motto: Filmeinstellung = Exporteinstellung

habe ich die Filmeinstellung auf < NTSC HDTV 1080i 16:9 (1920x...; 29 fps) > geändert // Background-Musik < mp3 >

Menüvorschau: 16:9 / HD statisch : Standard-Vorlage

Encodereinstellung (beim Brennen) < Blu-ray 1920x1080i NTSC (Default) > software-encoding / 'Videoeffekt auf GPU berechnen' aktiviert

=> Resultat : s.o. FAIL !!!

WAS ist daran falsch ??

Will auch verschiedene MPEG-4 Export-Varianten (von'AVCHD-Transportstrom' bis 'MP4 FullHD') ausprobieren ...

... und dann besteht jeder Film nur noch aus 1 Datei ; bisher auch ohne Erfolg !!

Damit ich selber gezielter vorgehen kann, brauche ich (auch 😉) die Hilfe von LOG-Spezialisten denn mit 'literally translation' kommt man allein nicht weiter.

Also, welche Konsequenzen beinhalten diese Formulierungen (= unterstrichene Logeinträge, s.u.) :

--  über das File-Ende hinaus ??

--  warum bekommt das Programm keine device/media spezifische Informationen ??

--  keinen Split-Point setzen für DL-Disc = Error ??  -  bei einem Volumen weit unter 23 GB !

--  „bufstream“ ??  -.-  und warum keine Bestätigung ??

2020/02/09 23:05:45 [INFO]    [UserAction]: Switch main tab to Arranger

2020/02/09 23:06:27 [INFO]    [UserAction]: Load project 2020-02-07_JAPAN-Film6.MVP

2020/02/09 23:07:15 [INFO]    [UserAction]: Switch main tab to Brenntab

2020/02/09 23:07:16 [ERROR]   [ResortAllPLE]: GetOriginalSample: OriginalSample beyond FileEnd

2020/02/09 23:07:16 [ERROR]   [ResortAllPLE]: GetOriginalSample: OriginalSample beyond FileEnd

2020/02/09 23:08:01 [WARNING] [DiscMaker]: setting no speed limit

2020/02/09 23:08:02 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/09 23:08:25 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/09 23:08:31 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/09 23:08:34 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/09 23:09:08 [WARNING] [DiscMaker]: setting no speed limit

2020/02/09 23:09:09 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/09 23:09:39 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/09 23:09:44 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/09 23:09:47 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/09 23:09:53 [INFO]    [DiscMaker]: Step 1 of 4, Encodiere Film 1 ...

2020/02/09 23:09:53 [ERROR]   [DiscMaker]: ConfigureSplitter: cannot set double layer split point0

2020/02/09 23:09:53 [INFO]    [_Common]: Export with GPU("AMD Radeon RX 5700")-FX rendering to C:\Users\Wolve\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image 2020-02-07_JAPAN-Film6\BDMV\STREAM\00000.m2ts started (MxMpeg4Intel-Blu-ray\BLURAY_1920x1080i_2997FPS_NTSC_DEFAULT.prs|1920x1080i|1.77778|29.97 FPS|28000 kbit/s||2 CHN|48000 Hz|384 kbit/s)

2020/02/09 23:18:34 [FATAL]   [MPEGIntel]: AudioCallback::confirm: MuxDataError |muxer type=BDMV |DP4 errno=0x04010BC0: Error 3008: not enough data to multiplex |where=DP4MetaMuxer::MuxData called MuxData |input buffer address=0x00000000C8202660, size=1536 |stream=AC3

2020/02/09 23:18:34 [FATAL]   [MPEGIntel]: BluRayH264DiscPipeline::EncodeAudio position 10070860: EncodeError |CInfoException (0x80004005) - bufstream::confirm failed |Media Foundation AC-3 |where=MediaFoundationEncoder::Encode called EncWrite |input buffer address=0x00000000DA38D020, size=6408

2020/02/09 23:18:34 [FATAL]   [Export - Engine]: Bounce: CInfoException: 0x80040010 - export->WriteAudioBuffer

2020/02/09 23:18:34 [FATAL]   [DiscMaker]: SetTrackInfo: CInfoException: 0x80040010

2020/02/09 23:18:34 [FATAL]   [DiscMaker]: CBConvertMovie: CInfoException: 0x80004005

2020/02/09 23:18:34 [INFO]    [DiscMaker]: Step 1 done

2020/02/09 23:18:34 [FATAL]   [DiscMaker]: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed

2020/02/09 23:18:34 [FATAL]   [DiscMaker]: !!! DBK BurnProject: 10 - movie encoding failed !!!

Gruß Wolve

 

Zuletzt geändert von Wolve

VdL 2023 Premium (22.0.3.172) [VdL Pr.(20.0.1.80)] / VdL 2015 Pr. (14.0.0.187) // Windows 10 Home-64Bit - autom. Update // AMD Ryzen7 3700X (8x3,60 GHz) / 16 GB RAM // Radeon RX5700 (GDDR 6 / 8 GB) aktuelles Update // Blu-Ray Brenner  Pioneer BDR-209 // 500 GB (SSD) + 4 TB (HDD) /// Nikon Z6 + 24-70 mm / 4,0

Kommentare

Wolve schrieb am 10.02.2020 um 11:19 Uhr

NACHTRAG zu o.g. MPEG-4 -Exporte :

„Film exportieren“ / „Video als MPEG-4“ („Videoeffekt auf GPU berechnen“ aktiviert) :

1.Versuch:  AVCHD-Transportstrom 1920x1080; 29i    >>>   xxx.m2ts  =>  in neues Projekt importiert  => 

Encodieren : < Blu-ray 1920x1080i NTSC (Default) > software-encoding / „Videoeffekt auf GPU berechnen“ aktiviert  => Brennen :  Abbruch – „drive in use ...“  !!?!

2.Versuch:  MP4 FullHD 1920x1080; 29p    >>>   xxx.mp4  =>  in neues Projekt importiert  => 

Encodieren : < Blu-ray 1920x1080i NTSC (Default) > software-encoding / „Videoeffekt auf GPU berechnen“ aktiviert  => Brennen :  Abbruch – „drive in use ...“  !!?!  -   s.nachfolgende Log-Einträge :

2020/02/10 09:45:10 [INFO]    [UserAction]: Start MAGIX Video deluxe Plus(19.0.1.31)

2020/02/10 09:45:16 [INFO]    [_Common]: RegisterApplicationForRestart()=Result=0

2020/02/10 09:45:27 [INFO]    [UserAction]: Load project 2020-02-07_JAPAN-Film6.MVP

2020/02/10 09:49:19 [INFO]    [UserAction]: Initiate save project as

2020/02/10 09:49:36 [INFO]    [UserAction]: Save project 2020-02-10_JAPAN-Film6.MVP..

2020/02/10 09:49:36 [ERROR]   [ResortAllPLE]: GetOriginalSample: OriginalSample beyond FileEnd

2020/02/10 09:49:36 [ERROR]   [ResortAllPLE]: GetOriginalSample: OriginalSample beyond FileEnd

2020/02/10 09:49:36 [INFO]    [UserAction]: ..succeeded

2020/02/10 09:50:06 [INFO]    [UserAction]: Initiate save project

2020/02/10 09:50:06 [INFO]    [UserAction]: Save project 2020-02-10_JAPAN-Film6.MVP..

2020/02/10 09:50:07 [INFO]    [UserAction]: ..succeeded

2020/02/10 09:50:12 [INFO]    [UserAction]: Switch main tab to Brenntab

2020/02/10 09:51:43 [INFO]    [UserAction]: Initiate save project

2020/02/10 09:51:43 [INFO]    [UserAction]: Save project 2020-02-10_JAPAN-Film6.MVP..

2020/02/10 09:51:43 [INFO]    [UserAction]: ..succeeded

2020/02/10 09:52:27 [INFO]    [DiscMaker]: BurnSupport: 1 device(s) found

2020/02/10 09:52:27 [WARNING] [DiscMaker]: setting no speed limit

2020/02/10 09:52:27 [WARNING] [DiscMaker]: DBK CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device.

2020/02/10 09:52:27 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/10 09:54:01 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/10 09:54:07 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/10 09:54:11 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/10 09:54:12 [INFO]    [DiscMaker]: Step 1 of 4, Encodiere Film 1 ...

2020/02/10 09:54:12 [ERROR]   [DiscMaker]: ConfigureSplitter: cannot set double layer split point0

2020/02/10 09:54:12 [INFO]    [_Common]: Export with GPU("AMD Radeon RX 5700")-FX rendering to C:\Users\Wolve\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image 2020-02-10_JAPAN-Film6\BDMV\STREAM\00000.m2ts started (MxMpeg4Intel-Blu-ray\BLURAY_1920x1080i_2997FPS_NTSC_DEFAULT.prs|1920x1080i|1.77778|29.97 FPS|28000 kbit/s||2 CHN|48000 Hz|384 kbit/s)

2020/02/10 10:18:41 [INFO]    [_Common]: Export 613.4s finished successful (Duration=1469.7s)

2020/02/10 10:18:42 [INFO]    [DiscMaker]: Step 1 done

2020/02/10 10:18:42 [INFO]    [DiscMaker]: Step 2 of 4, Encodiere Filmmenü ...

2020/02/10 10:18:42 [INFO]    [_Common]: Export with GPU("AMD Radeon RX 5700")-FX rendering to C:\Users\Wolve\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image 2020-02-10_JAPAN-Film6\BDMV\STREAM\00001.m2ts from 0 to 4233034 started (MxMpeg4Intel-Blu-ray|1920x1080i|1.77778|29.97 FPS|15000 kbit/s||2 CHN|48000 Hz|384 kbit/s)

2020/02/10 10:21:07 [INFO]    [_Common]: Export 88.2s finished successful (Duration=144.9s)

2020/02/10 10:21:07 [INFO]    [DiscMaker]: Step 2 done

2020/02/10 10:21:07 [INFO]    [DiscMaker]: ConvertMovie() - encoded file: C:\Users\Wolve\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image 2020-02-10_JAPAN-Film6\BDMV\STREAM\00000.m2ts

2020/02/10 10:21:07 [INFO]    [DiscMaker]: Step 3 of 4, Disc Image wird erzeugt...

2020/02/10 10:21:07 [INFO]    [DiscMaker]: Step 3 done

2020/02/10 10:21:09 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/10 10:21:12 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/10 10:21:13 [INFO]    [DiscMaker]: Step 4 of 4

2020/02/10 10:21:13 [INFO]    [DiscMaker]: Step 4 done

2020/02/10 10:21:13 [INFO]    [DiscMaker]: Step 4 of 4

2020/02/10 10:21:13 [INFO]    [DiscMaker]: Step 4 done

2020/02/10 10:21:13 [INFO]    [DiscMaker]: Step 4 of 4

2020/02/10 10:21:35 [ERROR]   [DiscMaker]: AVSDK Message - Cannot re-open drive -> drive is in use by another application

2020/02/10 10:21:35 [FATAL]   [DiscMaker]: !!! AVSDK BurnToDisc() calling AvVolWriteToDisc(): 106 - drive in use by another appl. !!!

2020/02/10 10:21:35 [FATAL]   [DiscMaker]: !!! DBK CBurnDevSupportPoint::BurnToDisc(): 215 - drive in use by another appl. !!!

2020/02/10 10:21:35 [INFO]    [DiscMaker]: Step 4 done

2020/02/10 10:21:35 [FATAL]   [DiscMaker]: project burning failed

2020/02/10 10:21:35 [FATAL]   [DiscMaker]: !!! DBK CBurnDevSupport::BurnProject(): 215 - drive in use by another appl. !!!

2020/02/10 10:21:35 [FATAL]   [DiscMaker]: !!! DBK BurnProject: 215 - drive in use by another appl. !!!

 

Welche Alternativen gibt es noch um das Projekt auf BD zu brennen ??

wolve

VdL 2023 Premium (22.0.3.172) [VdL Pr.(20.0.1.80)] / VdL 2015 Pr. (14.0.0.187) // Windows 10 Home-64Bit - autom. Update // AMD Ryzen7 3700X (8x3,60 GHz) / 16 GB RAM // Radeon RX5700 (GDDR 6 / 8 GB) aktuelles Update // Blu-Ray Brenner  Pioneer BDR-209 // 500 GB (SSD) + 4 TB (HDD) /// Nikon Z6 + 24-70 mm / 4,0

Wolve schrieb am 13.02.2020 um 18:38 Uhr

Zur Teil-Lösung selbst beigetragen :

die Meldung "... drive in use by another appl. "

taucht nicht mehr auf, wenn man (die BD-RE) in der Maske "BD brennen" sofort in der "DiscInformation"

Folgendes durchführt: Disc löschen => Auswerfen => Neu laden

Wegen der Encoding-Problematik habe ich mich an den support gewandt.

Gruß Wolve

VdL 2023 Premium (22.0.3.172) [VdL Pr.(20.0.1.80)] / VdL 2015 Pr. (14.0.0.187) // Windows 10 Home-64Bit - autom. Update // AMD Ryzen7 3700X (8x3,60 GHz) / 16 GB RAM // Radeon RX5700 (GDDR 6 / 8 GB) aktuelles Update // Blu-Ray Brenner  Pioneer BDR-209 // 500 GB (SSD) + 4 TB (HDD) /// Nikon Z6 + 24-70 mm / 4,0