mein in Magix Video deluxe 17 Premium erstellter Film (mpeg2video - 3,75 GB) lässt sich nicht auf Medion-DVD brennen

jerryli schrieb am 30.10.2012 um 14:35 Uhr

wollte den in Magix erstellten Film (mpeg2video -  3,75 GB, siehe auch Betreff) auf eine Medion-DVD brennen, hat aber nicht geklappt. Eine vorherige Simulation hatte funktioniert, nur der anschließende Brennvorgang nicht. Habe dann die mpeg-Datei in Nero-Express als Daten-DVD (auch Medion-DVD) gebrannt - hat funktioniert. Aber der DVD-Player erkennt die Daten-DVD nicht an.

Was kann ich machen, damit der in Magix erstellte Film auch in Magix auf DVD gebrannt wird? Wer kann mir da helfen?

Nachstehend die Fehlermeldung von Magix.

-------------------------- 13.04.2011 14:01:42 --------------------------

13.04.2011 14:01:42.716:   DLLAV32.DLL loaded, all entry points available
13.04.2011 14:01:42.716:   AVSDK MsgCbFunc registered
13.04.2011 14:01:42.716:   AVSDK: StatCbFunc registered
13.04.2011 14:01:42.872:   AVSDK Version 9.0.193
13.04.2011 14:01:42.872:   ------------ Reading Device Info ----------------
13.04.2011 14:01:42.872:   AVSDK: 1 device(s) found
13.04.2011 14:01:42.872:   Adapter=0  ID=1  LUN=0   E:TSSTcorp CDDVDW SN-S083C Revision:SB01
13.04.2011 14:01:42.872:   AVSDK: 1 record device(s) available
13.04.2011 14:01:42.872:   ------------ done ----------------

-------------------------- 18.10.2012 15:03:34 --------------------------

18.10.2012 15:03:34.587:   DLLAV32.DLL loaded, all entry points available
18.10.2012 15:03:34.587:   AVSDK MsgCbFunc registered
18.10.2012 15:03:34.587:   AVSDK: StatCbFunc registered
18.10.2012 15:03:34.805:   AVSDK Version 9.0.193
18.10.2012 15:03:34.821:   ------------ Reading Device Info ----------------
18.10.2012 15:03:34.821:   AVSDK: 1 device(s) found
18.10.2012 15:03:34.821:   Adapter=0  ID=1  LUN=0   E:TSSTcorp CDDVDW SN-S083C Revision:SB01
18.10.2012 15:03:34.821:   AVSDK: 1 record device(s) available
18.10.2012 15:03:34.821:   ------------ done ----------------
18.10.2012 15:03:35.102:   setting no speed limit
18.10.2012 15:03:35.117:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
18.10.2012 15:03:48.611:   Open Project: Bridgenachmittage_bei_Li -- dvd project 2012-10-18
18.10.2012 15:03:48.611:   VideoMode: PAL   Temp Dir: C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\
18.10.2012 15:03:48.611:   dll version 4.6.5.0
18.10.2012 15:03:48.611:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
18.10.2012 15:03:48.611:   EstimateLayerSplitPoint()...
18.10.2012 15:03:48.627:   Splitpunkt 4271833088 auf Disk mit Größe 440467456
18.10.2012 15:03:48.627:   Title an Stelle 0, Länge 131072, Typ 0
18.10.2012 15:03:48.627:   Title an Stelle 131072, Länge 1703936, Typ 1
18.10.2012 15:03:48.627:   Title an Stelle 1835008, Länge 438632448, Typ 1
18.10.2012 15:03:48.627:   ... Split möglich nach aktuellem Title, -> Abbruch
18.10.2012 15:03:48.627:   Step 1 of 5, Encodiere Film 1 ...
18.10.2012 15:03:55.085:   Step 1 done
18.10.2012 15:03:55.085:   Step 2 of 5, Encodiere Film 2 ...
18.10.2012 15:18:39.560:   Step 2 done
18.10.2012 15:18:39.560:   Step 3 of 5, Encodiere Filmmenü ...
18.10.2012 15:18:41.416:   Step 3 done
18.10.2012 15:18:41.432:   ConvertMovie() - encoded file: C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li\VTS_01_1.VOB
18.10.2012 15:18:41.432:   ConvertMovie() - encoded file: C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li\VTS_02_1.VOB
18.10.2012 15:18:41.432:   Step 4 of 5, Disc Image wird erzeugt...
18.10.2012 15:18:44.271:   Step 4 done
18.10.2012 15:18:49.154:   Step 5 of 5
18.10.2012 15:18:49.154:   Step 5 done
18.10.2012 15:18:49.154:   ------------ InitializeBurningProcess Point ----------------
18.10.2012 15:18:49.310:   setting PoINT cache size to 16777216l
18.10.2012 15:18:49.310:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
18.10.2012 15:18:49.310:    Booktype: don't care
18.10.2012 15:18:49.326:   setting write speed to 4155000  bytes/sec
18.10.2012 15:18:49.326:   this equals 3,000000x DVD / 23,554422x CD Speed
18.10.2012 15:18:49.326:   ------------ done: succeeded ----------------
18.10.2012 15:18:49.326:   ------------ CreateAPIProject ----------------
18.10.2012 15:18:49.326:   Step 5 of 5
18.10.2012 15:18:49.341:   creating DVD project in prepfile mode...
18.10.2012 15:18:49.341:   create volume... OK
18.10.2012 15:18:49.341:   verify option OFF
18.10.2012 15:18:49.341:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li\VIDEO_TS.IFO"
18.10.2012 15:18:49.357:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li\VIDEO_TS.VOB"
18.10.2012 15:18:49.357:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li\VTS_01_1.VOB"
18.10.2012 15:18:49.372:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li\VTS_01_0.IFO"
18.10.2012 15:18:49.372:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li\VTS_02_1.VOB"
18.10.2012 15:18:49.372:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li\VTS_02_0.IFO"
18.10.2012 15:18:49.372:   Step 5 done
18.10.2012 15:18:49.372:   ------------ done ----------------
18.10.2012 15:18:49.372:   ------------ BurnToDisc ----------------
18.10.2012 15:18:49.372:   Step 5 of 5
18.10.2012 15:18:49.372:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
18.10.2012 15:18:49.372:    Booktype: don't care
18.10.2012 15:18:49.372:   setting write speed to 4155000  bytes/sec
18.10.2012 15:18:49.388:   this equals 3,000000x DVD / 23,554422x CD Speed
18.10.2012 15:18:49.388:   Check on previously direct recorded session...OK
18.10.2012 15:18:49.388:   -- Volume mounted --
18.10.2012 15:18:49.388:   -- Recording on "E: TSSTcorp CDDVDW SN-S083C" --
18.10.2012 15:18:49.388:   -- Medium is "DVD-R" --
18.10.2012 15:18:49.388:   -- Manufacturer "OPTODISCR016" --
18.10.2012 15:18:49.435:   AVSDK Message - INFO: :Recording volume ...
18.10.2012 15:18:49.435:   AVSDK Status - Begin operation Recording 196208 sectors/frames
18.10.2012 15:18:49.435:   AVSDK Message - INFO: :Recording -> writing data ...
18.10.2012 15:18:54.801:   wrote LeadIn, start DataCopy
18.10.2012 15:23:49.460:   AVSDK Message - ERROR: :Cannot write to disc -> Cannot access medium/cartridge, unknown or incompatible format or application code mismatch (SK/ASC/ASCQ 02/30/05)
18.10.2012 15:24:04.233:   AVSDK Status - End operation Recording 196208 sectors/frames
18.10.2012 15:24:04.233:   AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
18.10.2012 15:24:04.233:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 204 - illegal log. or phys. disc format !!!
18.10.2012 15:24:04.233:   Step 5 done
18.10.2012 15:24:04.248:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 222 - illegal log. or phys. disc format !!!
18.10.2012 15:24:04.248:   ------------ done ----------------
18.10.2012 15:24:04.248:   project burning failed
18.10.2012 15:24:04.248:   !!! DBK error in CBurnDevSupport::BurnProject(): 222 - illegal log. or phys. disc format !!!
18.10.2012 15:24:04.248:   !!! DBK error in BurnProject: 222 - illegal log. or phys. disc format !!!
18.10.2012 15:24:29.397:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
18.10.2012 15:24:29.397:    DEVICE REMOVAL
18.10.2012 16:05:50.976:   setting no speed limit
18.10.2012 16:06:34.438:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
18.10.2012 16:06:34.438:    DEVICE REMOVAL
18.10.2012 16:07:22.954:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
18.10.2012 16:07:48.398:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
18.10.2012 16:07:48.398:    DEVICE REMOVAL
18.10.2012 16:08:52.062:   Open Project: Bridgenachmittage_bei_Li_-_1 -- dvd project 2012-10-18
18.10.2012 16:08:52.062:   VideoMode: PAL   Temp Dir: C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\
18.10.2012 16:08:52.062:   dll version 4.6.5.0
18.10.2012 16:08:52.062:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
18.10.2012 16:08:52.062:   EstimateLayerSplitPoint()...
18.10.2012 16:08:52.062:   Splitpunkt 4271833088 auf Disk mit Größe 440336384
18.10.2012 16:08:52.062:   Title an Stelle 0, Länge 1703936, Typ 1
18.10.2012 16:08:52.062:   Title an Stelle 1703936, Länge 438632448, Typ 1
18.10.2012 16:08:52.062:   ... Split möglich nach aktuellem Title, -> Abbruch
18.10.2012 16:08:52.077:   Step 1 of 4, Encodiere Film 1 ...
18.10.2012 16:08:58.255:   Step 1 done
18.10.2012 16:08:58.255:   Step 2 of 4, Encodiere Film 2 ...
18.10.2012 16:23:42.652:   Step 2 done
18.10.2012 16:23:42.667:   ConvertMovie() - encoded file: C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_01_1.VOB
18.10.2012 16:23:42.667:   ConvertMovie() - encoded file: C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_02_1.VOB
18.10.2012 16:23:42.667:   Step 3 of 4, Disc Image wird erzeugt...
18.10.2012 16:23:46.021:   Step 3 done
18.10.2012 16:23:50.654:   Step 4 of 4
18.10.2012 16:23:50.670:   Step 4 done
18.10.2012 16:23:50.670:   ------------ InitializeBurningProcess Point ----------------
18.10.2012 16:23:50.810:   setting PoINT cache size to 16777216l
18.10.2012 16:23:50.810:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
18.10.2012 16:23:50.810:    Booktype: don't care
18.10.2012 16:23:50.826:   setting write speed to 11080000  bytes/sec
18.10.2012 16:23:50.826:   this equals 8,000000x DVD / 62,811790x CD Speed
18.10.2012 16:23:50.826:   ------------ done: succeeded ----------------
18.10.2012 16:23:50.826:   ------------ CreateAPIProject ----------------
18.10.2012 16:23:50.826:   Step 4 of 4
18.10.2012 16:23:50.842:   creating DVD project in prepfile mode...
18.10.2012 16:23:50.842:   create volume... OK
18.10.2012 16:23:50.842:   verify option OFF
18.10.2012 16:23:50.842:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VIDEO_TS.IFO"
18.10.2012 16:23:50.857:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_01_1.VOB"
18.10.2012 16:23:50.857:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_01_0.IFO"
18.10.2012 16:23:50.857:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_02_1.VOB"
18.10.2012 16:23:50.857:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_02_0.IFO"
18.10.2012 16:23:50.857:   Step 4 done
18.10.2012 16:23:50.857:   ------------ done ----------------
18.10.2012 16:23:50.873:   ------------ BurnToDisc ----------------
18.10.2012 16:23:50.873:   Step 4 of 4
18.10.2012 16:23:50.873:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
18.10.2012 16:23:50.873:    Booktype: don't care
18.10.2012 16:23:50.888:   setting write speed to 11080000  bytes/sec
18.10.2012 16:23:50.888:   this equals 8,000000x DVD / 62,811790x CD Speed
18.10.2012 16:23:50.888:   Check on previously direct recorded session...OK
18.10.2012 16:23:50.888:   -- Volume mounted --
18.10.2012 16:23:50.888:   -- Recording on "E: TSSTcorp CDDVDW SN-S083C" --
18.10.2012 16:23:50.888:   -- Medium is "DVD-R" --
18.10.2012 16:23:50.888:   -- Manufacturer "CMC MAG. AM3" --
18.10.2012 16:23:50.904:   AVSDK Message - INFO: :Recording volume ...
18.10.2012 16:23:50.904:   AVSDK Status - Begin operation Recording 196144 sectors/frames
18.10.2012 16:23:50.904:   AVSDK Message - INFO: :Recording -> writing data ...
18.10.2012 16:23:55.818:   wrote LeadIn, start DataCopy
18.10.2012 16:28:12.579:   AVSDK Message - ERROR: :Cannot write to disc -> Cannot access medium/cartridge, unknown or incompatible format or application code mismatch (SK/ASC/ASCQ 02/30/05)
18.10.2012 16:28:23.967:   AVSDK Status - End operation Recording 196144 sectors/frames
18.10.2012 16:28:23.967:   AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
18.10.2012 16:28:23.967:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 204 - illegal log. or phys. disc format !!!
18.10.2012 16:28:23.967:   Step 4 done
18.10.2012 16:28:23.967:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 222 - illegal log. or phys. disc format !!!
18.10.2012 16:28:23.967:   ------------ done ----------------
18.10.2012 16:28:23.967:   project burning failed
18.10.2012 16:28:23.982:   !!! DBK error in CBurnDevSupport::BurnProject(): 222 - illegal log. or phys. disc format !!!
18.10.2012 16:28:23.982:   !!! DBK error in BurnProject: 222 - illegal log. or phys. disc format !!!
18.10.2012 16:34:16.402:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
18.10.2012 16:34:16.402:    DEVICE REMOVAL
18.10.2012 16:35:03.374:   AVSDK Message - ERROR: :Cannot open drive -> error code 14
18.10.2012 16:35:03.374:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
18.10.2012 16:35:03.374:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 202 - bad address given as parameter !!!
18.10.2012 16:35:09.761:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
18.10.2012 16:35:18.404:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
18.10.2012 16:35:18.404:    DEVICE REMOVAL
18.10.2012 16:35:51.725:   setting no speed limit
18.10.2012 16:35:51.756:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/02)
18.10.2012 16:35:51.756:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
18.10.2012 16:35:51.756:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
18.10.2012 16:38:07.430:   setting no speed limit
18.10.2012 16:39:21.655:   Open Project: Bridgenachmittage_bei_Li_-_1 -- wmv hd project 2012-10-18
18.10.2012 16:39:21.655:   VideoMode: PAL   Temp Dir: C:\Users\Renate\Videos\dvd-li\
18.10.2012 16:39:21.655:   dll version 4.6.5.0
18.10.2012 16:39:29.486:   Step 1 of 4, Encodiere Film 1 ...
18.10.2012 16:39:42.060:   Step 1 done
18.10.2012 16:39:42.060:   Step 2 of 4, Encodiere Film 2 ...
18.10.2012 17:17:50.303:   Step 2 done
18.10.2012 17:17:50.303:   ConvertMovie() - encoded file: C:\Users\Renate\Videos\dvd-li\video\MOVIE_01_1.WMV
18.10.2012 17:17:50.303:   ConvertMovie() - encoded file: C:\Users\Renate\Videos\dvd-li\video\MOVIE_02_1.WMV
18.10.2012 17:17:50.303:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
18.10.2012 17:17:50.303:   EstimateLayerSplitPoint()...
18.10.2012 17:17:50.318:   Splitpunkt 4271833088 auf Disk mit Größe 440336384
18.10.2012 17:17:50.318:   Title an Stelle 0, Länge 1703936, Typ 1
18.10.2012 17:17:50.318:   Title an Stelle 1703936, Länge 438632448, Typ 1
18.10.2012 17:17:50.318:   ... Split möglich nach aktuellem Title, -> Abbruch
18.10.2012 17:17:50.318:   Step 1 of 4, Encodiere Film 1 ...
18.10.2012 17:17:56.699:   Step 1 done
18.10.2012 17:17:56.699:   Step 2 of 4, Encodiere Film 2 ...
18.10.2012 17:32:51.036:   Step 2 done
18.10.2012 17:32:51.036:   ConvertMovie() - encoded file: C:\Users\Renate\Videos\dvd-li\VTS_01_1.VOB
18.10.2012 17:32:51.036:   ConvertMovie() - encoded file: C:\Users\Renate\Videos\dvd-li\VTS_02_1.VOB
18.10.2012 17:32:51.036:   Step 3 of 4, Disc Image wird erzeugt...
18.10.2012 17:32:54.531:   Step 3 done
18.10.2012 17:49:36.106:   setting no speed limit

-------------------------- 18.10.2012 18:23:51 --------------------------

18.10.2012 18:23:51.436:   DLLAV32.DLL loaded, all entry points available
18.10.2012 18:23:51.436:   AVSDK MsgCbFunc registered
18.10.2012 18:23:51.436:   AVSDK: StatCbFunc registered
18.10.2012 18:23:51.607:   AVSDK Version 9.0.193
18.10.2012 18:23:51.607:   ------------ Reading Device Info ----------------
18.10.2012 18:23:51.623:   AVSDK: 1 device(s) found
18.10.2012 18:23:51.623:   Adapter=0  ID=1  LUN=0   E:TSSTcorp CDDVDW SN-S083C Revision:SB01
18.10.2012 18:23:51.623:   AVSDK: 1 record device(s) available
18.10.2012 18:23:51.623:   ------------ done ----------------
18.10.2012 18:23:51.873:   setting no speed limit
18.10.2012 18:23:51.873:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
18.10.2012 18:26:02.757:   setting no speed limit
18.10.2012 18:26:59.822:   Open Project: Bridgenachmittage_bei_Li_-_1 -- dvd project 2012-10-18
18.10.2012 18:26:59.822:   VideoMode: PAL   Temp Dir: C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\
18.10.2012 18:26:59.822:   dll version 4.6.5.0
18.10.2012 18:26:59.822:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
18.10.2012 18:26:59.822:   EstimateLayerSplitPoint()...
18.10.2012 18:26:59.822:   Splitpunkt 4271833088 auf Disk mit Größe 440336384
18.10.2012 18:26:59.822:   Title an Stelle 0, Länge 1703936, Typ 1
18.10.2012 18:26:59.822:   Title an Stelle 1703936, Länge 438632448, Typ 1
18.10.2012 18:26:59.822:   ... Split möglich nach aktuellem Title, -> Abbruch
18.10.2012 18:27:28.495:   Step 1 of 4, Encodiere Film 1 ...
18.10.2012 18:27:28.495:   Step 1 done
18.10.2012 18:27:28.495:   Step 2 of 4, Encodiere Film 2 ...
18.10.2012 18:27:28.495:   Step 2 done
18.10.2012 18:27:28.495:   ConvertMovie() - encoded file: C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_01_1.VOB
18.10.2012 18:27:28.495:   ConvertMovie() - encoded file: C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_02_1.VOB
18.10.2012 18:27:28.510:   Step 3 of 4, Disc Image wird erzeugt...
18.10.2012 18:27:42.815:   Step 3 done
18.10.2012 18:27:45.358:   Step 4 of 4
18.10.2012 18:27:45.358:   Step 4 done
18.10.2012 18:27:45.374:   ------------ InitializeBurningProcess Point ----------------
18.10.2012 18:27:45.514:   setting PoINT cache size to 16777216l
18.10.2012 18:27:45.514:   Used burn options:
simulation: on
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
18.10.2012 18:27:45.530:    Booktype: don't care
18.10.2012 18:27:45.530:   setting write speed to 11080000  bytes/sec
18.10.2012 18:27:45.530:   this equals 8,000000x DVD / 62,811790x CD Speed
18.10.2012 18:27:45.530:   ------------ done: succeeded ----------------
18.10.2012 18:27:45.545:   ------------ CreateAPIProject ----------------
18.10.2012 18:27:45.545:   Step 4 of 4
18.10.2012 18:27:45.545:   creating DVD project in prepfile mode...
18.10.2012 18:27:45.545:   create volume... OK
18.10.2012 18:27:45.545:   verify option OFF
18.10.2012 18:27:45.561:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VIDEO_TS.IFO"
18.10.2012 18:27:45.561:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_01_1.VOB"
18.10.2012 18:27:45.561:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_01_0.IFO"
18.10.2012 18:27:45.561:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_02_1.VOB"
18.10.2012 18:27:45.577:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_02_0.IFO"
18.10.2012 18:27:45.577:   Step 4 done
18.10.2012 18:27:45.577:   ------------ done ----------------
18.10.2012 18:27:45.577:   ------------ BurnToDisc ----------------
18.10.2012 18:27:45.577:   Step 4 of 4
18.10.2012 18:27:45.577:   Used burn options:
simulation: on
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
18.10.2012 18:27:45.577:    Booktype: don't care
18.10.2012 18:27:45.592:   setting write speed to 11080000  bytes/sec
18.10.2012 18:27:45.592:   this equals 8,000000x DVD / 62,811790x CD Speed
18.10.2012 18:27:45.592:   Check on previously direct recorded session...OK
18.10.2012 18:27:45.592:   -- Volume mounted --
18.10.2012 18:27:45.592:   -- Recording on "E: TSSTcorp CDDVDW SN-S083C" --
18.10.2012 18:27:45.592:   -- Medium is "DVD-R" --
18.10.2012 18:27:45.592:   -- Manufacturer "CMC MAG. AM3" --
18.10.2012 18:27:45.608:   AVSDK Message - INFO: :Recording volume ...
18.10.2012 18:27:45.608:   AVSDK Status - Begin operation Recording 196144 sectors/frames
18.10.2012 18:27:45.608:   AVSDK Message - INFO: :Recording -> writing data ...
18.10.2012 18:27:48.993:   wrote LeadIn, start DataCopy
18.10.2012 18:29:31.470:   writing leadout and closing disc
18.10.2012 18:31:29.187:   writing leadout and closing disc
18.10.2012 18:31:29.187:   AVSDK Status - End operation Recording 196144 sectors/frames
18.10.2012 18:31:29.203:   AVSDK Message - INFO: :Recording successfully completed
18.10.2012 18:31:29.219:   Step 4 done
18.10.2012 18:31:29.219:   ------------ done ----------------
18.10.2012 18:31:39.624:   ------------ BurnToDisc ----------------
18.10.2012 18:31:39.624:   Step 4 of 4
18.10.2012 18:31:39.624:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
18.10.2012 18:31:39.624:    Booktype: don't care
18.10.2012 18:31:39.686:   setting write speed to 11080000  bytes/sec
18.10.2012 18:31:39.686:   this equals 8,000000x DVD / 62,811790x CD Speed
18.10.2012 18:31:39.686:   Check on previously direct recorded session...OK
18.10.2012 18:31:39.686:   -- Volume mounted --
18.10.2012 18:31:39.686:   -- Recording on "E: TSSTcorp CDDVDW SN-S083C" --
18.10.2012 18:31:39.686:   -- Medium is "DVD-R" --
18.10.2012 18:31:39.686:   -- Manufacturer "CMC MAG. AM3" --
18.10.2012 18:31:39.702:   AVSDK Message - INFO: :Recording volume ...
18.10.2012 18:31:39.702:   AVSDK Status - Begin operation Recording 196144 sectors/frames
18.10.2012 18:31:39.702:   AVSDK Message - INFO: :Recording -> writing data ...
18.10.2012 18:31:39.920:   wrote LeadIn, start DataCopy
18.10.2012 18:35:57.133:   AVSDK Message - ERROR: :Cannot write to disc -> Cannot access medium/cartridge, unknown or incompatible format or application code mismatch (SK/ASC/ASCQ 02/30/05)
18.10.2012 18:36:08.568:   AVSDK Status - End operation Recording 196144 sectors/frames
18.10.2012 18:36:08.568:   AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
18.10.2012 18:36:08.568:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 204 - illegal log. or phys. disc format !!!
18.10.2012 18:36:08.568:   Step 4 done
18.10.2012 18:36:08.568:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 222 - illegal log. or phys. disc format !!!
18.10.2012 18:36:08.568:   ------------ done ----------------
18.10.2012 18:36:08.568:   project burning failed
18.10.2012 18:36:08.584:   !!! DBK error in CBurnDevSupport::BurnProject(): 222 - illegal log. or phys. disc format !!!
18.10.2012 18:36:08.584:   !!! DBK error in BurnProject: 222 - illegal log. or phys. disc format !!!
18.10.2012 18:36:56.407:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
18.10.2012 18:36:56.407:    DEVICE REMOVAL
18.10.2012 18:38:02.395:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
18.10.2012 18:38:02.395:    DEVICE ARRIVED
18.10.2012 18:38:10.944:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!

-------------------------- 19.10.2012 11:41:21 --------------------------

19.10.2012 11:41:21.516:   DLLAV32.DLL loaded, all entry points available
19.10.2012 11:41:21.516:   AVSDK MsgCbFunc registered
19.10.2012 11:41:21.516:   AVSDK: StatCbFunc registered
19.10.2012 11:41:21.704:   AVSDK Version 9.0.193
19.10.2012 11:41:21.704:   ------------ Reading Device Info ----------------
19.10.2012 11:41:21.704:   AVSDK: 1 device(s) found
19.10.2012 11:41:21.704:   Adapter=0  ID=1  LUN=0   E:TSSTcorp CDDVDW SN-S083C Revision:SB01
19.10.2012 11:41:21.704:   AVSDK: 1 record device(s) available
19.10.2012 11:41:21.704:   ------------ done ----------------
19.10.2012 11:41:21.969:   setting no speed limit
19.10.2012 11:41:21.969:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
19.10.2012 11:41:24.387:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
19.10.2012 11:41:42.124:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
19.10.2012 11:53:45.121:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
19.10.2012 11:53:58.787:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
19.10.2012 11:53:58.787:    DEVICE REMOVAL
19.10.2012 11:54:39.159:   AVSDK Message - ERROR: :Cannot open drive -> error code 14
19.10.2012 11:54:39.159:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
19.10.2012 11:54:39.159:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 202 - bad address given as parameter !!!
19.10.2012 11:55:01.526:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
19.10.2012 11:55:01.526:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
19.10.2012 11:55:01.526:   !!! AVSDK error: OpenRecorderTray() calling AvDevControl(): 5 - request not allowed !!!
19.10.2012 11:55:03.710:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
19.10.2012 11:55:03.710:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
19.10.2012 11:55:03.710:   !!! AVSDK error: OpenRecorderTray() calling AvDevControl(): 5 - request not allowed !!!
19.10.2012 11:55:10.012:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
19.10.2012 11:55:10.012:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
19.10.2012 11:55:10.012:   !!! AVSDK error: OpenRecorderTray() calling AvDevControl(): 5 - request not allowed !!!
19.10.2012 11:55:11.229:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
19.10.2012 11:55:11.229:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
19.10.2012 11:55:11.229:   !!! AVSDK error: OpenRecorderTray() calling AvDevControl(): 5 - request not allowed !!!
19.10.2012 11:55:11.947:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
19.10.2012 11:55:11.947:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
19.10.2012 11:55:11.947:   !!! AVSDK error: OpenRecorderTray() calling AvDevControl(): 5 - request not allowed !!!
19.10.2012 11:56:00.509:   AVSDK Message - ERROR: :Cannot open drive -> error code 14
19.10.2012 11:56:00.509:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
19.10.2012 11:56:00.509:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 202 - bad address given as parameter !!!
19.10.2012 11:56:31.710:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
19.10.2012 11:56:31.710:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
19.10.2012 11:56:31.710:   !!! AVSDK error: OpenRecorderTray() calling AvDevControl(): 5 - request not allowed !!!
19.10.2012 11:56:34.814:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
19.10.2012 11:56:34.814:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
19.10.2012 11:56:34.814:   !!! AVSDK error: OpenRecorderTray() calling AvDevControl(): 5 - request not allowed !!!
19.10.2012 11:56:35.922:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
19.10.2012 11:56:35.937:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
19.10.2012 11:56:35.937:   !!! AVSDK error: OpenRecorderTray() calling AvDevControl(): 5 - request not allowed !!!
19.10.2012 11:59:29.207:   setting no speed limit
19.10.2012 12:01:03.306:   setting no speed limit
19.10.2012 12:02:00.964:   Open Project: Bridgenachmittage_bei_Li_-_1 -- dvd project 2012-10-19
19.10.2012 12:02:00.964:   VideoMode: PAL   Temp Dir: C:\Users\Renate\Videos\19-10-12\
19.10.2012 12:02:00.964:   dll version 4.6.5.0
19.10.2012 12:02:00.964:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
19.10.2012 12:02:00.964:   EstimateLayerSplitPoint()...
19.10.2012 12:02:00.964:   Splitpunkt 4271833088 auf Disk mit Größe 440336384
19.10.2012 12:02:00.964:   Title an Stelle 0, Länge 1703936, Typ 1
19.10.2012 12:02:00.964:   Title an Stelle 1703936, Länge 438632448, Typ 1
19.10.2012 12:02:00.964:   ... Split möglich nach aktuellem Title, -> Abbruch
19.10.2012 12:02:00.964:   Step 1 of 4, Encodiere Film 1 ...
19.10.2012 12:02:06.892:   Step 1 done
19.10.2012 12:02:06.892:   Step 2 of 4, Encodiere Film 2 ...
19.10.2012 12:02:16.881:   Step 2 done
19.10.2012 12:02:16.881:   ERROR: PrepareDVDVideoFiles() failed with errNo 11 - user cancelled
19.10.2012 12:02:16.896:   !!! DBK error in BurnProject: 1 - user cancelled operation !!!
19.10.2012 12:03:10.797:   Open Project: Bridgenachmittage_bei_Li_-_1 -- dvd project 2012-10-19
19.10.2012 12:03:10.797:   VideoMode: PAL   Temp Dir: C:\Users\Renate\Videos\19-10-12\
19.10.2012 12:03:10.797:   dll version 4.6.5.0
19.10.2012 12:03:10.797:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
19.10.2012 12:03:10.797:   EstimateLayerSplitPoint()...
19.10.2012 12:03:10.797:   Splitpunkt 4271833088 auf Disk mit Größe 440336384
19.10.2012 12:03:10.813:   Title an Stelle 0, Länge 1703936, Typ 1
19.10.2012 12:03:10.813:   Title an Stelle 1703936, Länge 438632448, Typ 1
19.10.2012 12:03:10.813:   ... Split möglich nach aktuellem Title, -> Abbruch
19.10.2012 12:03:31.155:   ERROR: PrepareDVDVideoFiles() failed with errNo 11 - user cancelled
19.10.2012 12:03:31.155:   !!! DBK error in BurnProject: 1 - user cancelled operation !!!
19.10.2012 12:03:46.381:   setting no speed limit
19.10.2012 12:04:25.085:   Open Project: Bridgenachmittage_bei_Li_-_1 -- dvd project 2012-10-19
19.10.2012 12:04:25.085:   VideoMode: PAL   Temp Dir: C:\Users\Renate\Videos\19-10-12\
19.10.2012 12:04:25.085:   dll version 4.6.5.0
19.10.2012 12:04:25.085:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
19.10.2012 12:04:25.085:   EstimateLayerSplitPoint()...
19.10.2012 12:04:25.100:   Splitpunkt 4271833088 auf Disk mit Größe 440336384
19.10.2012 12:04:25.100:   Title an Stelle 0, Länge 1703936, Typ 1
19.10.2012 12:04:25.100:   Title an Stelle 1703936, Länge 438632448, Typ 1
19.10.2012 12:04:25.100:   ... Split möglich nach aktuellem Title, -> Abbruch
19.10.2012 12:04:44.117:   ERROR: PrepareDVDVideoFiles() failed with errNo 11 - user cancelled
19.10.2012 12:04:44.117:   !!! DBK error in BurnProject: 1 - user cancelled operation !!!
19.10.2012 12:04:50.481:   setting no speed limit
19.10.2012 12:05:21.869:   Open Project: Bridgenachmittage_bei_Li_-_1 -- dvd project 2012-10-19
19.10.2012 12:05:21.869:   VideoMode: PAL   Temp Dir: C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\
19.10.2012 12:05:21.869:   dll version 4.6.5.0
19.10.2012 12:05:21.869:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
19.10.2012 12:05:21.869:   EstimateLayerSplitPoint()...
19.10.2012 12:05:21.884:   Splitpunkt 4271833088 auf Disk mit Größe 440336384
19.10.2012 12:05:21.884:   Title an Stelle 0, Länge 1703936, Typ 1
19.10.2012 12:05:21.884:   Title an Stelle 1703936, Länge 438632448, Typ 1
19.10.2012 12:05:21.884:   ... Split möglich nach aktuellem Title, -> Abbruch
19.10.2012 12:05:42.227:   Step 1 of 4, Encodiere Film 1 ...
19.10.2012 12:05:42.227:   Step 1 done
19.10.2012 12:05:42.242:   Step 2 of 4, Encodiere Film 2 ...
19.10.2012 12:05:42.242:   Step 2 done
19.10.2012 12:05:42.242:   ConvertMovie() - encoded file: C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_01_1.VOB
19.10.2012 12:05:42.242:   ConvertMovie() - encoded file: C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_02_1.VOB
19.10.2012 12:05:42.242:   Step 3 of 4, Disc Image wird erzeugt...
19.10.2012 12:05:42.242:   Step 3 done
19.10.2012 12:05:44.723:   Step 4 of 4
19.10.2012 12:05:44.723:   Step 4 done
19.10.2012 12:05:44.723:   ------------ InitializeBurningProcess Point ----------------
19.10.2012 12:05:44.879:   setting PoINT cache size to 16777216l
19.10.2012 12:05:44.879:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
19.10.2012 12:05:44.879:    Booktype: don't care
19.10.2012 12:05:44.894:   setting write speed to 11080000  bytes/sec
19.10.2012 12:05:44.894:   this equals 8,000000x DVD / 62,811790x CD Speed
19.10.2012 12:05:44.894:   ------------ done: succeeded ----------------
19.10.2012 12:05:44.894:   ------------ CreateAPIProject ----------------
19.10.2012 12:05:44.894:   Step 4 of 4
19.10.2012 12:05:44.910:   creating DVD project in prepfile mode...
19.10.2012 12:05:44.910:   create volume... OK
19.10.2012 12:05:44.910:   verify option OFF
19.10.2012 12:05:44.925:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VIDEO_TS.IFO"
19.10.2012 12:05:45.003:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_01_1.VOB"
19.10.2012 12:05:45.019:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_01_0.IFO"
19.10.2012 12:05:45.035:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_02_1.VOB"
19.10.2012 12:05:45.066:   adding file "C:\Users\Renate\Documents\MAGIX\Video_deluxe_17_Premium\Disc Images\DVD Image Bridgenachmittage_bei_Li_-_1\VTS_02_0.IFO"
19.10.2012 12:05:45.066:   Step 4 done
19.10.2012 12:05:45.066:   ------------ done ----------------
19.10.2012 12:05:45.066:   ------------ BurnToDisc ----------------
19.10.2012 12:05:45.066:   Step 4 of 4
19.10.2012 12:05:45.066:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
19.10.2012 12:05:45.081:    Booktype: don't care
19.10.2012 12:05:45.081:   setting write speed to 11080000  bytes/sec
19.10.2012 12:05:45.081:   this equals 8,000000x DVD / 62,811790x CD Speed
19.10.2012 12:05:45.081:   Check on previously direct recorded session...OK
19.10.2012 12:05:45.097:   -- Volume mounted --
19.10.2012 12:05:45.097:   -- Recording on "E: TSSTcorp CDDVDW SN-S083C" --
19.10.2012 12:05:45.097:   -- Medium is "DVD-R" --
19.10.2012 12:05:45.097:   -- Manufacturer "OPTODISCR008" --
19.10.2012 12:05:45.175:   AVSDK Message - INFO: :Recording volume ...
19.10.2012 12:05:45.175:   AVSDK Status - Begin operation Recording 196144 sectors/frames
19.10.2012 12:05:45.175:   AVSDK Message - INFO: :Recording -> writing data ...
19.10.2012 12:05:45.347:   wrote LeadIn, start DataCopy
19.10.2012 12:10:01.733:   AVSDK Message - ERROR: :Cannot write to disc -> Cannot access medium/cartridge, unknown or incompatible format or application code mismatch (SK/ASC/ASCQ 02/30/05)
19.10.2012 12:10:16.241:   AVSDK Status - End operation Recording 196144 sectors/frames
19.10.2012 12:10:16.241:   AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
19.10.2012 12:10:16.241:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 204 - illegal log. or phys. disc format !!!
19.10.2012 12:10:16.241:   Step 4 done
19.10.2012 12:10:16.241:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 222 - illegal log. or phys. disc format !!!
19.10.2012 12:10:16.241:   ------------ done ----------------
19.10.2012 12:10:16.241:   project burning failed
19.10.2012 12:10:16.257:   !!! DBK error in CBurnDevSupport::BurnProject(): 222 - illegal log. or phys. disc format !!!
19.10.2012 12:10:16.257:   !!! DBK error in BurnProject: 222 - illegal log. or phys. disc format !!!

Kommentare

wabu schrieb am 30.10.2012 um 14:41 Uhr

Dazu hätte ich ein paar Fragen:

Wenn ich ein Projekt erstelle füge ich in die timeline meine Medien ein, kann auch ein "ganzer" mpg Film sein.

Um davon eine spielbare DVD anzufertigen gehe ich auf "Brennen", mache dort ggf ein Menue oder lasse alles wie es ist und gehe dort auf Brennen.

War das auch dein Weg??

Zuletzt geändert von wabu am 30.10.2012, 14:41, insgesamt 1-mal geändert.

wabu ...............der nie auslernt

Der Rechner  Installierter physischer Speicher (RAM) 32,0 GB / Prozessor Intel(R) Core(TM) i7-9700K CPU @ 3.60GHz, 3600 MHz, 8 Kern(e), 8 logische(r) Prozessor(en),

Intel® UHD Graphics 630 aktiviert

NVIDIA Geforce GTX 1650 HDMI ; 2x DVI ; VGA, PCIe

Samsung (SSD) HD103SJ F3 1 TB Sata 7200 / 2x LG GH22NS SATA schwarz

Betriebsystem Microsoft Windows 10 Home Version 10.0.18362 Build 22H2

geschnitten wird seit 2007 mit Magix immer aktuell VdL und ProX

gefilmt mit Panasonic SDT 750 und FZ 1000 sowie Pentax K30 (Mist) und einer Q500k und SJ 1000 und Hero7

fotografiert mit Pentax K10 und K30 (Super)/Sigma 10-20 und 18-200; Fisheye und 500mm Spiegeltele

Mein Kanal: youtube

newpapa schrieb am 30.10.2012 um 16:29 Uhr

Hallo,

Deine Brennversuche enden alle mit   !!! DBK error in CBurnDevSupport::BurnProject(): 222 - illegal log. or phys. disc format !!! Also wird der Rohling nicht richtig erkannt -> Anderen Rohling nehmen.

Du schreibst aber, dass der Rohling über Nero akzeptiert wird, dann brenne über Nero. Natürlich muss es eine Video-DVD werden. Der Weg muss so sein, dass am Ende auf der DVD ein Ordner mit dem Namen "VIDEO_TS" ist und darin alle Dateien xxx.BUP, xxx.IFO und xxx.VOB enthalten sind. Geht man den Weg über eine VIDEO_DVD braucht man nur die Dateien in der Brennliste und das Brennprogramm erzeugt den Ordner automatisch. Wenn Du nur den Weg über eine DatenDVD hinkriegst, dann pack alle Dateien in einen Ordner mit dem Namen "VIDEO_TS" und ziehe den Ordner in die Brennliste. Das funktioniert auch.

geschi schrieb am 30.10.2012 um 19:04 Uhr

Verwende zur Probe eine +R.