Hier ist die Loddatei für Video deLuxe 16 (Brennen abgebrochen)

faxenmacher schrieb am 17.01.2011 um 10:59 Uhr

 

Erstz mal herzlichen Dank für die Antwort, ich habe ein Comicbild (17,14 Minuten) entfernt, jetzt wird an einer Stelle, die davor gespeichert(mpeg2, 14,15 Minuten) wurde, das Speichern abgebrochen und ich kann mit Nero nur noch 14,15 Minuten statt insgesamt 42 Minuten brennen.

 


 -------------------------- 19.04.2010 22:11:25 --------------------------

19.04.2010 22:11:25.968: DLLAV32.DLL loaded, all entry points available
19.04.2010 22:11:25.968: AVSDK MsgCbFunc registered
19.04.2010 22:11:25.968: AVSDK: StatCbFunc registered
19.04.2010 22:11:26.046: AVSDK Version 8.1.186
19.04.2010 22:11:26.046: ------------ Reading Device Info ----------------
19.04.2010 22:11:26.046: AVSDK: 3 device(s) found
19.04.2010 22:11:26.046: Adapter=0 ID=0 LUN=0 D:HL-DT-ST DVDRAM GSA-H44N Revision:RB01
19.04.2010 22:11:26.046: Adapter=0 ID=1 LUN=0 E:HL-DT-ST DVD-RAM GSA-H55L Revision:1.05
19.04.2010 22:11:26.046: Adapter=6 ID=1 LUN=0 G:VXDV DVD-RAM DVDR S95 Revision:9.00
19.04.2010 22:11:26.046: AVSDK: 3 record device(s) available
19.04.2010 22:11:26.046: ------------ done ----------------

-------------------------- 20.04.2010 17:25:39 --------------------------

20.04.2010 17:25:39.453: DLLAV32.DLL loaded, all entry points available
20.04.2010 17:25:39.453: AVSDK MsgCbFunc registered
20.04.2010 17:25:39.453: AVSDK: StatCbFunc registered
20.04.2010 17:25:39.625: AVSDK Version 8.1.186
20.04.2010 17:25:39.640: ------------ Reading Device Info ----------------
20.04.2010 17:25:39.640: AVSDK: 3 device(s) found
20.04.2010 17:25:39.640: Adapter=0 ID=0 LUN=0 D:HL-DT-ST DVDRAM GSA-H44N Revision:RB01
20.04.2010 17:25:39.640: Adapter=0 ID=1 LUN=0 E:HL-DT-ST DVD-RAM GSA-H55L Revision:1.05
20.04.2010 17:25:39.640: Adapter=6 ID=1 LUN=0 G:VXDV DVD-RAM DVDR S95 Revision:9.00
20.04.2010 17:25:39.640: AVSDK: 3 record device(s) available
20.04.2010 17:25:39.640: ------------ done ----------------

-------------------------- 14.08.2010 17:06:41 --------------------------

14.08.2010 17:06:41.218: DLLAV32.DLL loaded, all entry points available
14.08.2010 17:06:41.218: AVSDK MsgCbFunc registered
14.08.2010 17:06:41.218: AVSDK: StatCbFunc registered
14.08.2010 17:06:41.343: AVSDK Version 8.1.186
14.08.2010 17:06:41.343: ------------ Reading Device Info ----------------
14.08.2010 17:06:41.343: AVSDK: 3 device(s) found
14.08.2010 17:06:41.343: Adapter=0 ID=0 LUN=0 D:HL-DT-ST DVDRAM GSA-H44N Revision:RB01
14.08.2010 17:06:41.343: Adapter=0 ID=1 LUN=0 E:HL-DT-ST DVD-RAM GSA-H55L Revision:1.05
14.08.2010 17:06:41.343: Adapter=6 ID=1 LUN=0 G:VXDV DVD-RAM DVDR S95 Revision:9.00
14.08.2010 17:06:41.343: AVSDK: 3 record device(s) available
14.08.2010 17:06:41.343: ------------ done ----------------
14.08.2010 17:06:41.421: setting no speed limit
14.08.2010 17:06:41.421: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
14.08.2010 17:06:41.437: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
14.08.2010 17:06:41.437: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
14.08.2010 17:06:41.437: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
14.08.2010 17:07:38.671: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
14.08.2010 17:07:38.671: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
14.08.2010 17:07:38.671: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
14.08.2010 17:07:40.734: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
14.08.2010 17:07:40.734: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
14.08.2010 17:07:40.734: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
14.08.2010 17:07:40.734: Open Project: Ozeanium_in_Stralsund_2 -- dvd project 2010-08-14
14.08.2010 17:07:40.734: VideoMode: PAL Temp Dir: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\
14.08.2010 17:07:40.734: dll version 4.3.6.2
14.08.2010 17:07:40.734: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
14.08.2010 17:07:40.734: EstimateLayerSplitPoint()...
14.08.2010 17:07:40.750: Splitpunkt 4271833088 auf Disk mit Größe 924549120
14.08.2010 17:07:40.750: Title an Stelle 0, Länge 131072, Typ 0
14.08.2010 17:07:40.750: Title an Stelle 131072, Länge 131072, Typ 0
14.08.2010 17:07:40.750: Title an Stelle 262144, Länge 924286976, Typ 1
14.08.2010 17:07:40.750: ... Split möglich nach aktuellem Title, -> Abbruch
14.08.2010 17:07:40.750: Step 1 of 6, Encodiere Film 1 ...
14.08.2010 17:37:33.375: Step 1 done
14.08.2010 17:37:33.390: Step 2 of 6, Encodiere Filmmenü ...
14.08.2010 17:37:34.343: Step 2 done
14.08.2010 17:37:34.343: Step 3 of 6, Encodiere Kapitelmenü 1 ...
14.08.2010 17:37:34.343: Step 3 done
14.08.2010 17:37:34.343: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Ozeanium_in_Stralsund_2\VTS_01_1.VOB
14.08.2010 17:37:34.343: Step 4 of 6, Erzeuge Disc-Image ...
14.08.2010 17:37:38.359: Step 4 done
14.08.2010 17:37:38.437: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
14.08.2010 17:37:38.437: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
14.08.2010 17:37:38.437: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
14.08.2010 17:38:09.406: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
14.08.2010 17:38:09.406: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
14.08.2010 17:38:09.406: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
14.08.2010 17:38:13.640: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
14.08.2010 17:38:13.640: DEVICE ARRIVED
14.08.2010 17:38:13.687: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
14.08.2010 17:38:13.687: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
14.08.2010 17:38:13.687: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
14.08.2010 17:38:14.250: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
14.08.2010 17:38:14.250: DEVICE REMOVAL
14.08.2010 17:38:31.640: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
14.08.2010 17:38:31.640: DEVICE ARRIVED
14.08.2010 17:38:50.984: Step 5 of 6
14.08.2010 17:38:51.000: Step 5 done
14.08.2010 17:38:51.000: ------------ InitializeBurningProcess Point ----------------
14.08.2010 17:38:51.062: setting PoINT cache size to 16777216l
14.08.2010 17:38:51.093: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
14.08.2010 17:38:51.093: Booktype: don't care
14.08.2010 17:38:51.093: setting write speed to 3324000 bytes/sec
14.08.2010 17:38:51.093: this equals 2,400000x DVD / 18,843538x CD Speed
14.08.2010 17:38:51.093: ------------ done: succeeded ----------------
14.08.2010 17:38:51.093: ------------ CreateAPIProject ----------------
14.08.2010 17:38:51.093: Step 6 of 6
14.08.2010 17:38:51.093: creating DVD project in prepfile mode...
14.08.2010 17:38:51.109: create volume... OK
14.08.2010 17:38:51.109: verify option OFF
14.08.2010 17:38:51.109: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Ozeanium_in_Stralsund_2\VIDEO_TS.IFO"
14.08.2010 17:38:51.109: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Ozeanium_in_Stralsund_2\VIDEO_TS.VOB"
14.08.2010 17:38:51.109: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Ozeanium_in_Stralsund_2\VTS_01_1.VOB"
14.08.2010 17:38:51.109: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Ozeanium_in_Stralsund_2\VTS_01_0.IFO"
14.08.2010 17:38:51.109: Step 6 done
14.08.2010 17:38:51.125: ------------ done ----------------
14.08.2010 17:38:51.125: ------------ BurnToDisc ----------------
14.08.2010 17:38:51.125: time:
14.08.2010 17:38:51.125: Step 6 of 6
14.08.2010 17:38:51.125: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
14.08.2010 17:38:51.140: Booktype: don't care
14.08.2010 17:38:51.140: setting write speed to 3324000 bytes/sec
14.08.2010 17:38:51.140: this equals 2,400000x DVD / 18,843538x CD Speed
14.08.2010 17:38:51.203: Check on previously direct recorded session...OK
14.08.2010 17:38:51.203: -- Volume mounted --
14.08.2010 17:38:51.203: -- Recording on "D: HL-DT-ST DVDRAM GSA-H44N" --
14.08.2010 17:38:51.203: -- Medium is "DVD+RW" --
14.08.2010 17:38:51.203: -- Manufacturer "OPTODISC" --
14.08.2010 17:38:51.234: AVSDK Message - INFO: :Recording volume ...
14.08.2010 17:38:51.234: AVSDK Message - INFO: :Recording -> formatting disc to prepare recording ...
14.08.2010 17:38:56.312: AVSDK Status - Begin operation Recording 359242 sectors/frames
14.08.2010 17:38:56.328: time:
14.08.2010 17:38:56.328: AVSDK Message - INFO: :Recording -> writing data ...
14.08.2010 17:38:56.484: wrote LeadIn, start DataCopy
14.08.2010 17:38:56.484: time:
14.08.2010 17:42:38.671: writing leadout and closing disc
14.08.2010 17:42:38.671: time:
14.08.2010 17:42:38.687: writing leadout and closing disc
14.08.2010 17:42:38.687: time:
14.08.2010 17:42:46.984: writing leadout and closing disc
14.08.2010 17:42:46.984: time:
14.08.2010 17:42:46.984: AVSDK Message - INFO: :Recording -> finalising disc ...
14.08.2010 17:42:52.453: AVSDK Status - End operation Recording 359242 sectors/frames
14.08.2010 17:42:52.453: AVSDK Message - INFO: :Recording successfully completed
14.08.2010 17:42:54.562: Step 6 done
14.08.2010 17:42:54.562: ------------ done ----------------
14.08.2010 17:42:54.562: time:
14.08.2010 17:47:39.656: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
14.08.2010 17:47:39.656: DEVICE REMOVAL

-------------------------- 29.08.2010 11:15:54 --------------------------

29.08.2010 11:15:54.593: DLLAV32.DLL loaded, all entry points available
29.08.2010 11:15:54.593: AVSDK MsgCbFunc registered
29.08.2010 11:15:54.593: AVSDK: StatCbFunc registered
29.08.2010 11:15:54.718: AVSDK Version 8.1.186
29.08.2010 11:15:54.718: ------------ Reading Device Info ----------------
29.08.2010 11:15:54.718: AVSDK: 3 device(s) found
29.08.2010 11:15:54.718: Adapter=0 ID=0 LUN=0 D:HL-DT-ST DVDRAM GSA-H44N Revision:RB01
29.08.2010 11:15:54.718: Adapter=0 ID=1 LUN=0 E:HL-DT-ST DVD-RAM GSA-H55L Revision:1.05
29.08.2010 11:15:54.718: Adapter=6 ID=1 LUN=0 G:VXDV DVD-RAM DVDR S95 Revision:9.00
29.08.2010 11:15:54.734: AVSDK: 3 record device(s) available
29.08.2010 11:15:54.734: ------------ done ----------------
29.08.2010 11:15:54.812: setting no speed limit
29.08.2010 11:15:54.812: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
29.08.2010 11:16:13.390: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
29.08.2010 11:16:13.390: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
29.08.2010 11:16:13.390: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
29.08.2010 11:16:13.406: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
29.08.2010 11:16:13.437: DEVICE REMOVAL
29.08.2010 11:16:17.671: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
29.08.2010 11:16:17.687: DEVICE ARRIVED
29.08.2010 11:16:18.468: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
29.08.2010 11:16:27.625: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
29.08.2010 11:16:29.875: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
29.08.2010 11:16:35.078: AVSDK Status - Begin operation Erasing disc
29.08.2010 11:16:35.078: time:
29.08.2010 11:17:07.968: AVSDK Status - End operation Erasing disc
29.08.2010 11:19:45.562: Open Project: Film_Stralsund -- dvd project 2010-08-29
29.08.2010 11:19:45.562: VideoMode: PAL Temp Dir: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\
29.08.2010 11:19:45.562: dll version 4.3.6.2
29.08.2010 11:19:45.578: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
29.08.2010 11:19:45.578: EstimateLayerSplitPoint()...
29.08.2010 11:19:45.578: Splitpunkt 4271833088 auf Disk mit Größe 1320779776
29.08.2010 11:19:45.578: Title an Stelle 0, Länge 131072, Typ 0
29.08.2010 11:19:45.578: Title an Stelle 131072, Länge 622592, Typ 0
29.08.2010 11:19:45.578: Title an Stelle 753664, Länge 1320026112, Typ 1
29.08.2010 11:19:45.578: ... Split möglich nach aktuellem Title, -> Abbruch
29.08.2010 11:19:45.578: Step 1 of 6, Encodiere Film 1 ...
29.08.2010 11:26:07.828: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
29.08.2010 11:26:07.828: DEVICE REMOVAL
29.08.2010 11:26:30.843: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
29.08.2010 11:26:30.843: DEVICE ARRIVED
29.08.2010 11:40:14.109: Step 1 done
29.08.2010 11:40:14.140: ERROR: PrepareDVDVideoFiles() failed with errNo 11 - user cancelled
29.08.2010 11:40:14.140: !!! DBK error in BurnProject: 1 - user cancelled operation !!!

-------------------------- 24.09.2010 18:16:57 --------------------------

24.09.2010 18:16:57.281: DLLAV32.DLL loaded, all entry points available
24.09.2010 18:16:57.281: AVSDK MsgCbFunc registered
24.09.2010 18:16:57.281: AVSDK: StatCbFunc registered
24.09.2010 18:16:57.390: AVSDK Version 8.1.186
24.09.2010 18:16:57.390: ------------ Reading Device Info ----------------
24.09.2010 18:16:57.390: AVSDK: 3 device(s) found
24.09.2010 18:16:57.390: Adapter=0 ID=0 LUN=0 D:HL-DT-ST DVDRAM GSA-H44N Revision:RB01
24.09.2010 18:16:57.390: Adapter=0 ID=1 LUN=0 E:HL-DT-ST DVD-RAM GSA-H55L Revision:1.05
24.09.2010 18:16:57.390: Adapter=6 ID=1 LUN=0 G:VXDV DVD-RAM DVDR S95 Revision:9.00
24.09.2010 18:16:57.390: AVSDK: 3 record device(s) available
24.09.2010 18:16:57.390: ------------ done ----------------
24.09.2010 18:16:57.500: setting no speed limit
24.09.2010 18:16:57.500: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
24.09.2010 18:16:57.656: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
24.09.2010 18:16:57.656: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
24.09.2010 18:16:57.656: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
24.09.2010 18:17:08.750: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
24.09.2010 18:17:08.750: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
24.09.2010 18:17:16.890: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
24.09.2010 18:17:16.890: DEVICE REMOVAL
24.09.2010 18:17:49.890: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
24.09.2010 18:17:49.890: DEVICE ARRIVED
24.09.2010 18:17:54.718: Open Project: Neuzelle_und_Klaistow_2 -- dvd project 2010-09-24
24.09.2010 18:17:54.718: VideoMode: PAL Temp Dir: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\
24.09.2010 18:17:54.718: dll version 4.3.6.2
24.09.2010 18:17:54.718: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
24.09.2010 18:17:54.734: EstimateLayerSplitPoint()...
24.09.2010 18:17:54.734: Splitpunkt 4271833088 auf Disk mit Größe 1783431168
24.09.2010 18:17:54.734: Title an Stelle 0, Länge 131072, Typ 0
24.09.2010 18:17:54.734: Title an Stelle 131072, Länge 131072, Typ 0
24.09.2010 18:17:54.734: Title an Stelle 262144, Länge 644481024, Typ 1
24.09.2010 18:17:54.734: Title an Stelle 644743168, Länge 131072, Typ 0
24.09.2010 18:17:54.734: Title an Stelle 644874240, Länge 1138556928, Typ 1
24.09.2010 18:17:54.750: ... Split möglich nach aktuellem Title, -> Abbruch
24.09.2010 18:17:54.750: Step 1 of 8, Encodiere Film 1 ...
24.09.2010 18:46:04.796: Step 1 done
24.09.2010 18:46:04.796: Step 2 of 8, Encodiere Film 2 ...
24.09.2010 19:22:36.421: Step 2 done
24.09.2010 19:22:36.437: Step 3 of 8, Encodiere Filmmenü ...
24.09.2010 19:22:37.015: Step 3 done
24.09.2010 19:22:37.015: Step 4 of 8, Encodiere Kapitelmenü 1 ...
24.09.2010 19:22:37.015: Step 4 done
24.09.2010 19:22:37.015: Step 5 of 8, Encodiere Kapitelmenü 2 ...
24.09.2010 19:22:37.031: Step 5 done
24.09.2010 19:22:37.031: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VTS_01_1.VOB
24.09.2010 19:22:37.031: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VTS_02_1.VOB
24.09.2010 19:22:37.046: Step 6 of 8, Erzeuge Disc-Image ...
24.09.2010 19:23:35.859: Step 6 done
24.09.2010 19:23:40.109: Step 7 of 8
24.09.2010 19:23:40.109: Step 7 done
24.09.2010 19:23:40.109: ------------ InitializeBurningProcess Point ----------------
24.09.2010 19:23:40.140: setting PoINT cache size to 16777216l
24.09.2010 19:23:40.156: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
24.09.2010 19:23:40.156: Booktype: don't care
24.09.2010 19:23:40.156: setting write speed to 5540000 bytes/sec
24.09.2010 19:23:40.171: this equals 4,000000x DVD / 31,405897x CD Speed
24.09.2010 19:23:40.171: ------------ done: succeeded ----------------
24.09.2010 19:23:40.171: ------------ CreateAPIProject ----------------
24.09.2010 19:23:40.171: Step 8 of 8
24.09.2010 19:23:40.187: creating DVD project in prepfile mode...
24.09.2010 19:23:40.187: create volume... OK
24.09.2010 19:23:40.187: verify option OFF
24.09.2010 19:23:40.187: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VIDEO_TS.IFO"
24.09.2010 19:23:40.187: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VIDEO_TS.VOB"
24.09.2010 19:23:40.187: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VTS_01_1.VOB"
24.09.2010 19:23:40.187: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VTS_01_0.IFO"
24.09.2010 19:23:40.187: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VTS_02_1.VOB"
24.09.2010 19:23:40.187: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VTS_02_0.IFO"
24.09.2010 19:23:40.203: Step 8 done
24.09.2010 19:23:40.203: ------------ done ----------------
24.09.2010 19:23:40.203: ------------ BurnToDisc ----------------
24.09.2010 19:23:40.203: time:
24.09.2010 19:23:40.218: Step 8 of 8
24.09.2010 19:23:40.234: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
24.09.2010 19:23:40.234: Booktype: don't care
24.09.2010 19:23:40.234: setting write speed to 5540000 bytes/sec
24.09.2010 19:23:40.234: this equals 4,000000x DVD / 31,405897x CD Speed
24.09.2010 19:23:40.234: Check on previously direct recorded session...OK
24.09.2010 19:23:40.234: -- Volume mounted --
24.09.2010 19:23:40.234: -- Recording on "E: HL-DT-ST DVD-RAM GSA-H55L" --
24.09.2010 19:23:40.234: -- Medium is "DVD-R" --
24.09.2010 19:23:40.234: -- Manufacturer "CMC MAG. AM3" --
24.09.2010 19:23:40.281: AVSDK Message - INFO: :Recording volume ...
24.09.2010 19:23:40.281: AVSDK Status - Begin operation Recording 808976 sectors/frames
24.09.2010 19:23:40.281: time:
24.09.2010 19:23:40.281: AVSDK Message - INFO: :Recording -> writing data ...
24.09.2010 19:23:40.531: wrote LeadIn, start DataCopy
24.09.2010 19:23:40.531: time:
24.09.2010 19:28:55.593: writing leadout and closing disc
24.09.2010 19:28:55.593: time:
24.09.2010 19:29:26.640: writing leadout and closing disc
24.09.2010 19:29:26.640: time:
24.09.2010 19:29:26.640: AVSDK Status - End operation Recording 808976 sectors/frames
24.09.2010 19:29:26.656: AVSDK Message - INFO: :Recording successfully completed
24.09.2010 19:29:28.703: Step 8 done
24.09.2010 19:29:28.703: ------------ done ----------------
24.09.2010 19:29:28.703: time:
24.09.2010 19:53:06.859: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
24.09.2010 19:53:06.859: DEVICE REMOVAL

-------------------------- 24.09.2010 19:58:53 --------------------------

24.09.2010 19:58:53.046: DLLAV32.DLL loaded, all entry points available
24.09.2010 19:58:53.046: AVSDK MsgCbFunc registered
24.09.2010 19:58:53.046: AVSDK: StatCbFunc registered
24.09.2010 19:58:53.109: AVSDK Version 8.1.186
24.09.2010 19:58:53.109: ------------ Reading Device Info ----------------
24.09.2010 19:58:53.125: AVSDK: 3 device(s) found
24.09.2010 19:58:53.125: Adapter=0 ID=0 LUN=0 D:HL-DT-ST DVDRAM GSA-H44N Revision:RB01
24.09.2010 19:58:53.125: Adapter=0 ID=1 LUN=0 E:HL-DT-ST DVD-RAM GSA-H55L Revision:1.05
24.09.2010 19:58:53.125: Adapter=6 ID=1 LUN=0 G:VXDV DVD-RAM DVDR S95 Revision:9.00
24.09.2010 19:58:53.125: AVSDK: 3 record device(s) available
24.09.2010 19:58:53.125: ------------ done ----------------
24.09.2010 19:58:53.187: setting no speed limit
24.09.2010 19:58:53.187: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
24.09.2010 19:58:53.218: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
24.09.2010 19:58:53.218: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
24.09.2010 19:58:53.218: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
24.09.2010 19:59:28.906: AVSDK Message - ERROR: :Cannot open drive -> Drive not ready (SK/ASC/ASCQ 02/04/01)
24.09.2010 19:59:28.906: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 101 - drive not ready !!!
24.09.2010 19:59:28.906: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 211 - drive not ready !!!
24.09.2010 19:59:28.906: Open Project: Neuzelle_und_Klaistow3 -- dvd project 2010-09-24
24.09.2010 19:59:28.906: VideoMode: PAL Temp Dir: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\
24.09.2010 19:59:28.906: dll version 4.3.6.2
24.09.2010 19:59:28.921: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
24.09.2010 19:59:28.921: EstimateLayerSplitPoint()...
24.09.2010 19:59:28.921: Splitpunkt 4271833088 auf Disk mit Größe 1783431168
24.09.2010 19:59:28.921: Title an Stelle 0, Länge 131072, Typ 0
24.09.2010 19:59:28.921: Title an Stelle 131072, Länge 131072, Typ 0
24.09.2010 19:59:28.921: Title an Stelle 262144, Länge 1138556928, Typ 1
24.09.2010 19:59:28.921: ... Split möglich nach aktuellem Title, -> Abbruch
24.09.2010 19:59:28.937: Step 1 of 8, Encodiere Film 1 ...
24.09.2010 20:00:09.937: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
24.09.2010 20:00:09.937: DEVICE ARRIVED
24.09.2010 20:00:11.765: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
24.09.2010 21:22:17.046: Step 1 done
24.09.2010 21:22:17.062: Step 2 of 8, Encodiere Film 2 ...
24.09.2010 21:59:06.203: Step 2 done
24.09.2010 21:59:06.203: Step 3 of 8, Encodiere Filmmenü ...
24.09.2010 21:59:06.875: Step 3 done
24.09.2010 21:59:06.875: Step 4 of 8, Encodiere Kapitelmenü 1 ...
24.09.2010 21:59:06.875: Step 4 done
24.09.2010 21:59:06.890: Step 5 of 8, Encodiere Kapitelmenü 2 ...
24.09.2010 21:59:06.890: Step 5 done
24.09.2010 21:59:06.890: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow3\VTS_01_1.VOB
24.09.2010 21:59:06.890: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow3\VTS_02_1.VOB
24.09.2010 21:59:06.890: Step 6 of 8, Erzeuge Disc-Image ...
24.09.2010 21:59:26.562: Step 6 done
24.09.2010 21:59:30.218: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
24.09.2010 23:24:26.890: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
24.09.2010 23:24:27.437: AVSDK Status - Begin operation Erasing disc
24.09.2010 23:24:27.437: time:
24.09.2010 23:25:38.468: AVSDK Status - End operation Erasing disc
24.09.2010 23:25:42.625: Step 7 of 8
24.09.2010 23:25:42.625: Step 7 done
24.09.2010 23:25:42.625: ------------ InitializeBurningProcess Point ----------------
24.09.2010 23:25:42.656: setting PoINT cache size to 16777216l
24.09.2010 23:25:42.671: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
24.09.2010 23:25:42.687: Booktype: don't care
24.09.2010 23:25:42.687: setting write speed to 5540000 bytes/sec
24.09.2010 23:25:42.703: this equals 4,000000x DVD / 31,405897x CD Speed
24.09.2010 23:25:42.703: ------------ done: succeeded ----------------
24.09.2010 23:25:42.703: ------------ CreateAPIProject ----------------
24.09.2010 23:25:42.703: Step 8 of 8
24.09.2010 23:25:42.703: creating DVD project in prepfile mode...
24.09.2010 23:25:42.718: create volume... OK
24.09.2010 23:25:42.718: verify option OFF
24.09.2010 23:25:42.718: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow3\VIDEO_TS.IFO"
24.09.2010 23:25:42.718: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow3\VIDEO_TS.VOB"
24.09.2010 23:25:42.718: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow3\VTS_01_1.VOB"
24.09.2010 23:25:42.734: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow3\VTS_01_0.IFO"
24.09.2010 23:25:42.734: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow3\VTS_02_1.VOB"
24.09.2010 23:25:42.734: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow3\VTS_02_0.IFO"
24.09.2010 23:25:42.734: Step 8 done
24.09.2010 23:25:42.734: ------------ done ----------------
24.09.2010 23:25:42.734: ------------ BurnToDisc ----------------
24.09.2010 23:25:42.734: time:
24.09.2010 23:25:42.734: Step 8 of 8
24.09.2010 23:25:42.734: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
24.09.2010 23:25:42.734: Booktype: don't care
24.09.2010 23:25:42.734: setting write speed to 5540000 bytes/sec
24.09.2010 23:25:42.750: this equals 4,000000x DVD / 31,405897x CD Speed
24.09.2010 23:25:42.750: Check on previously direct recorded session...OK
24.09.2010 23:25:42.750: -- Volume mounted --
24.09.2010 23:25:42.750: -- Recording on "E: HL-DT-ST DVD-RAM GSA-H55L" --
24.09.2010 23:25:42.750: -- Medium is "DVD-RW" --
24.09.2010 23:25:42.750: -- Manufacturer "RITEKW04" --
24.09.2010 23:25:42.765: AVSDK Message - INFO: :Recording volume ...
24.09.2010 23:25:42.765: AVSDK Status - Begin operation Recording 809040 sectors/frames
24.09.2010 23:25:42.765: time:
24.09.2010 23:25:42.765: AVSDK Message - INFO: :Recording -> writing data ...
24.09.2010 23:25:43.046: wrote LeadIn, start DataCopy
24.09.2010 23:25:43.046: time:
24.09.2010 23:30:39.625: writing leadout and closing disc
24.09.2010 23:30:39.625: time:
24.09.2010 23:31:18.671: writing leadout and closing disc
24.09.2010 23:31:18.671: time:
24.09.2010 23:31:18.671: AVSDK Status - End operation Recording 809040 sectors/frames
24.09.2010 23:31:18.671: AVSDK Message - INFO: :Recording successfully completed
24.09.2010 23:31:19.343: Step 8 done
24.09.2010 23:31:19.343: ------------ done ----------------
24.09.2010 23:31:19.343: time:

-------------------------- 25.09.2010 12:31:09 --------------------------

25.09.2010 12:31:09.328: DLLAV32.DLL loaded, all entry points available
25.09.2010 12:31:09.328: AVSDK MsgCbFunc registered
25.09.2010 12:31:09.328: AVSDK: StatCbFunc registered
25.09.2010 12:31:09.437: AVSDK Version 8.1.186
25.09.2010 12:31:09.437: ------------ Reading Device Info ----------------
25.09.2010 12:31:09.437: AVSDK: 3 device(s) found
25.09.2010 12:31:09.453: Adapter=0 ID=0 LUN=0 D:HL-DT-ST DVDRAM GSA-H44N Revision:RB01
25.09.2010 12:31:09.453: Adapter=0 ID=1 LUN=0 E:HL-DT-ST DVD-RAM GSA-H55L Revision:1.05
25.09.2010 12:31:09.453: Adapter=6 ID=1 LUN=0 G:VXDV DVD-RAM DVDR S95 Revision:9.00
25.09.2010 12:31:09.453: AVSDK: 3 record device(s) available
25.09.2010 12:31:09.453: ------------ done ----------------
25.09.2010 12:31:09.531: setting no speed limit
25.09.2010 12:31:09.531: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
25.09.2010 12:31:09.546: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
25.09.2010 12:31:09.546: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
25.09.2010 12:31:09.546: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
25.09.2010 12:31:45.812: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
25.09.2010 12:31:45.812: DEVICE ARRIVED
25.09.2010 12:31:52.437: Open Project: Neuzelle_und_Klaistow_2 -- dvd project 2010-09-25
25.09.2010 12:31:52.437: VideoMode: PAL Temp Dir: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\
25.09.2010 12:31:52.437: dll version 4.3.6.2
25.09.2010 12:31:52.437: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
25.09.2010 12:31:52.437: EstimateLayerSplitPoint()...
25.09.2010 12:31:52.453: Splitpunkt 4271833088 auf Disk mit Größe 2443018240
25.09.2010 12:31:52.453: Title an Stelle 0, Länge 131072, Typ 0
25.09.2010 12:31:52.453: Title an Stelle 131072, Länge 131072, Typ 0
25.09.2010 12:31:52.453: Title an Stelle 262144, Länge 644481024, Typ 1
25.09.2010 12:31:52.453: Title an Stelle 644743168, Länge 131072, Typ 0
25.09.2010 12:31:52.453: Title an Stelle 644874240, Länge 1798144000, Typ 1
25.09.2010 12:31:52.453: ... Split möglich nach aktuellem Title, -> Abbruch
25.09.2010 12:32:04.343: Step 1 of 8, Encodiere Film 1 ...
25.09.2010 13:00:19.343: Step 1 done
25.09.2010 13:00:19.343: Step 2 of 8, Encodiere Film 2 ...
25.09.2010 13:42:44.156: Step 2 done
25.09.2010 13:42:44.203: Step 3 of 8, Encodiere Filmmenü ...
25.09.2010 13:42:44.500: Step 3 done
25.09.2010 13:42:44.500: Step 4 of 8, Encodiere Kapitelmenü 1 ...
25.09.2010 13:42:44.500: Step 4 done
25.09.2010 13:42:44.515: Step 5 of 8, Encodiere Kapitelmenü 2 ...
25.09.2010 13:42:44.515: Step 5 done
25.09.2010 13:42:44.515: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VTS_01_1.VOB
25.09.2010 13:42:44.515: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VTS_02_1.VOB
25.09.2010 13:42:44.515: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VTS_02_2.VOB
25.09.2010 13:42:44.515: Step 6 of 8, Erzeuge Disc-Image ...
25.09.2010 13:44:08.093: Step 6 done
25.09.2010 13:44:13.609: Step 7 of 8
25.09.2010 13:44:13.609: Step 7 done
25.09.2010 13:44:13.609: ------------ InitializeBurningProcess Point ----------------
25.09.2010 13:44:13.640: setting PoINT cache size to 16777216l
25.09.2010 13:44:13.671: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
25.09.2010 13:44:13.687: Booktype: don't care
25.09.2010 13:44:13.687: setting write speed to 5540000 bytes/sec
25.09.2010 13:44:13.687: this equals 4,000000x DVD / 31,405897x CD Speed
25.09.2010 13:44:13.687: ------------ done: succeeded ----------------
25.09.2010 13:44:13.687: ------------ CreateAPIProject ----------------
25.09.2010 13:44:13.687: Step 8 of 8
25.09.2010 13:44:13.687: creating DVD project in prepfile mode...
25.09.2010 13:44:13.718: create volume... OK
25.09.2010 13:44:13.718: verify option OFF
25.09.2010 13:44:13.718: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VIDEO_TS.IFO"
25.09.2010 13:44:13.718: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VIDEO_TS.VOB"
25.09.2010 13:44:13.718: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VTS_01_1.VOB"
25.09.2010 13:44:13.734: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VTS_01_0.IFO"
25.09.2010 13:44:15.625: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VTS_02_1.VOB"
25.09.2010 13:44:16.640: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VTS_02_2.VOB"
25.09.2010 13:44:16.640: adding file "C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image Neuzelle_und_Klaistow_2\VTS_02_0.IFO"
25.09.2010 13:44:16.656: Step 8 done
25.09.2010 13:44:16.671: ------------ done ----------------
25.09.2010 13:44:16.671: ------------ BurnToDisc ----------------
25.09.2010 13:44:16.671: time:
25.09.2010 13:44:16.703: Step 8 of 8
25.09.2010 13:44:16.703: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
25.09.2010 13:44:16.703: Booktype: don't care
25.09.2010 13:44:16.703: setting write speed to 5540000 bytes/sec
25.09.2010 13:44:16.703: this equals 4,000000x DVD / 31,405897x CD Speed
25.09.2010 13:44:16.703: Check on previously direct recorded session...OK
25.09.2010 13:44:16.703: -- Volume mounted --
25.09.2010 13:44:16.703: -- Recording on "E: HL-DT-ST DVD-RAM GSA-H55L" --
25.09.2010 13:44:16.703: -- Medium is "DVD-R" --
25.09.2010 13:44:16.703: -- Manufacturer "CMC MAG. AM3" --
25.09.2010 13:44:16.734: AVSDK Message - INFO: :Recording volume ...
25.09.2010 13:44:16.734: AVSDK Status - Begin operation Recording 1080752 sectors/frames
25.09.2010 13:44:16.734: time:
25.09.2010 13:44:16.750: AVSDK Message - INFO: :Recording -> writing data ...
25.09.2010 13:44:18.000: wrote LeadIn, start DataCopy
25.09.2010 13:44:18.000: time:
25.09.2010 13:51:12.765: writing leadout and closing disc
25.09.2010 13:51:12.765: time:
25.09.2010 13:51:44.812: writing leadout and closing disc
25.09.2010 13:51:44.828: time:
25.09.2010 13:51:44.828: AVSDK Status - End operation Recording 1080752 sectors/frames
25.09.2010 13:51:44.828: AVSDK Message - INFO: :Recording successfully completed
25.09.2010 13:51:46.828: Step 8 done
25.09.2010 13:51:46.828: ------------ done ----------------
25.09.2010 13:51:46.828: time:

-------------------------- 13.12.2010 19:02:14 --------------------------

13.12.2010 19:02:14.906: DLLAV32.DLL loaded, all entry points available
13.12.2010 19:02:14.906: AVSDK MsgCbFunc registered
13.12.2010 19:02:14.906: AVSDK: StatCbFunc registered
13.12.2010 19:02:14.953: AVSDK Version 8.1.186
13.12.2010 19:02:14.968: ------------ Reading Device Info ----------------
13.12.2010 19:02:14.968: AVSDK: 3 device(s) found
13.12.2010 19:02:14.968: Adapter=0 ID=0 LUN=0 D:HL-DT-ST DVDRAM GSA-H44N Revision:RB01
13.12.2010 19:02:14.984: Adapter=0 ID=1 LUN=0 E:HL-DT-ST DVD-RAM GSA-H55L Revision:1.05
13.12.2010 19:02:14.984: Adapter=6 ID=1 LUN=0 G:VXDV DVD-RAM DVDR S95 Revision:9.00
13.12.2010 19:02:14.984: AVSDK: 3 record device(s) available
13.12.2010 19:02:14.984: ------------ done ----------------
13.12.2010 19:02:15.093: setting no speed limit
13.12.2010 19:02:15.109: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
13.12.2010 19:02:15.140: AVSDK Message - ERROR: :Cannot open drive -> Drive not ready (SK/ASC/ASCQ 02/04/01)
13.12.2010 19:02:15.140: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 101 - drive not ready !!!
13.12.2010 19:02:15.140: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 211 - drive not ready !!!
13.12.2010 19:02:22.906: AVSDK Message - ERROR: :Cannot open drive -> Drive not ready (SK/ASC/ASCQ 02/04/01)
13.12.2010 19:02:22.906: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 101 - drive not ready !!!
13.12.2010 19:02:22.906: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 211 - drive not ready !!!
13.12.2010 19:02:22.906: Open Project: 2010-12-12 -- dvd project 2010-12-13
13.12.2010 19:02:22.906: VideoMode: PAL Temp Dir: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\
13.12.2010 19:02:22.906: dll version 4.3.6.2
13.12.2010 19:02:22.906: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
13.12.2010 19:02:22.906: EstimateLayerSplitPoint()...
13.12.2010 19:02:22.921: Splitpunkt 4271833088 auf Disk mit Größe 2321022976
13.12.2010 19:02:22.921: Title an Stelle 0, Länge 131072, Typ 0
13.12.2010 19:02:22.921: Title an Stelle 131072, Länge 131072, Typ 0
13.12.2010 19:02:22.921: Title an Stelle 262144, Länge 2320760832, Typ 1
13.12.2010 19:02:22.921: ... Split möglich nach aktuellem Title, -> Abbruch
13.12.2010 19:02:22.921: Step 1 of 6, Encodiere Film 1 ...
13.12.2010 19:07:09.812: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
13.12.2010 19:07:09.828: DEVICE ARRIVED
13.12.2010 19:07:41.234: AVSDK Message - ERROR: :Cannot open drive -> Drive is unable to recover table of contents (TOC) or program memory area (PMA) (SK/ASC/ASCQ 03/57/00)
13.12.2010 19:07:41.250: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 204 - illegal log. or phys. disc format !!!
13.12.2010 19:07:41.250: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 222 - illegal log. or phys. disc format !!!
13.12.2010 19:21:46.500: Step 1 done
13.12.2010 19:21:46.500: Step 2 of 6, Encodiere Filmmenü ...
13.12.2010 19:21:46.953: Step 2 done
13.12.2010 19:21:46.953: Step 3 of 6, Encodiere Kapitelmenü 1 ...
13.12.2010 19:21:46.953: Step 3 done
13.12.2010 19:21:46.968: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image 2010-12-12\VTS_01_1.VOB
13.12.2010 19:21:46.968: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image 2010-12-12\VTS_01_2.VOB
13.12.2010 19:21:46.968: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image 2010-12-12\VTS_01_3.VOB
13.12.2010 19:21:46.968: Step 4 of 6, Erzeuge Disc-Image ...
13.12.2010 19:22:22.593: Step 4 done
13.12.2010 19:22:57.875: AVSDK Message - ERROR: :Cannot open drive -> Drive is unable to recover table of contents (TOC) or program memory area (PMA) (SK/ASC/ASCQ 03/57/00)
13.12.2010 19:22:57.890: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 204 - illegal log. or phys. disc format !!!
13.12.2010 19:22:57.890: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 222 - illegal log. or phys. disc format !!!
13.12.2010 19:23:04.984: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
13.12.2010 19:23:04.984: DEVICE REMOVAL
13.12.2010 19:25:50.687: AVSDK Message - ERROR: :Cannot open drive -> Drive not ready (SK/ASC/ASCQ 02/04/01)
13.12.2010 19:25:50.687: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 101 - drive not ready !!!
13.12.2010 19:25:50.687: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 211 - drive not ready !!!
13.12.2010 19:25:50.687: !!! DBK error in BurnProject: 211 - drive not ready !!!
13.12.2010 19:27:42.671: AVSDK Message - ERROR: :Cannot open drive -> Drive not ready (SK/ASC/ASCQ 02/04/01)
13.12.2010 19:27:42.671: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 101 - drive not ready !!!
13.12.2010 19:27:42.671: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 211 - drive not ready !!!
13.12.2010 19:27:42.671: Open Project: 2010-12-12 -- dvd project 2010-12-13
13.12.2010 19:27:42.671: VideoMode: PAL Temp Dir: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\
13.12.2010 19:27:42.671: dll version 4.3.6.2
13.12.2010 19:27:42.671: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
13.12.2010 19:27:42.671: EstimateLayerSplitPoint()...
13.12.2010 19:27:42.687: Splitpunkt 4271833088 auf Disk mit Größe 2321022976
13.12.2010 19:27:42.687: Title an Stelle 0, Länge 131072, Typ 0
13.12.2010 19:27:42.687: Title an Stelle 131072, Länge 131072, Typ 0
13.12.2010 19:27:42.687: Title an Stelle 262144, Länge 2320760832, Typ 1
13.12.2010 19:27:42.687: ... Split möglich nach aktuellem Title, -> Abbruch
13.12.2010 19:27:45.625: Step 1 of 6, Encodiere Film 1 ...
13.12.2010 19:27:45.625: Step 1 done
13.12.2010 19:27:45.625: Step 2 of 6, Encodiere Filmmenü ...
13.12.2010 19:27:45.890: Step 2 done
13.12.2010 19:27:45.890: Step 3 of 6, Encodiere Kapitelmenü 1 ...
13.12.2010 19:27:45.890: Step 3 done
13.12.2010 19:27:45.906: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image 2010-12-12\VTS_01_1.VOB
13.12.2010 19:27:45.906: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image 2010-12-12\VTS_01_2.VOB
13.12.2010 19:27:45.906: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image 2010-12-12\VTS_01_3.VOB
13.12.2010 19:27:45.906: Step 4 of 6, Erzeuge Disc-Image ...
13.12.2010 19:27:52.718: Step 4 done
13.12.2010 19:27:52.812: AVSDK Message - ERROR: :Cannot open drive -> Drive not ready (SK/ASC/ASCQ 02/04/01)
13.12.2010 19:27:52.812: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 101 - drive not ready !!!
13.12.2010 19:27:52.812: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 211 - drive not ready !!!
13.12.2010 19:28:07.500: AVSDK Message - ERROR: :Cannot open drive -> Drive not ready (SK/ASC/ASCQ 02/04/01)
13.12.2010 19:28:07.500: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 101 - drive not ready !!!
13.12.2010 19:28:07.500: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 211 - drive not ready !!!
13.12.2010 19:28:07.500: !!! DBK error in BurnProject: 211 - drive not ready !!!
13.12.2010 19:28:19.187: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
13.12.2010 19:28:19.187: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.12.2010 19:28:19.187: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.12.2010 19:28:33.718: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
13.12.2010 19:28:33.718: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.12.2010 19:28:33.718: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.12.2010 19:28:47.296: AVSDK Message - ERROR: :Cannot open drive -> Drive not ready (SK/ASC/ASCQ 02/04/01)
13.12.2010 19:28:47.296: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 101 - drive not ready !!!
13.12.2010 19:28:47.296: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 211 - drive not ready !!!
13.12.2010 19:28:47.296: Open Project: 2010-12-12 -- dvd project 2010-12-13
13.12.2010 19:28:47.296: VideoMode: PAL Temp Dir: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\
13.12.2010 19:28:47.296: dll version 4.3.6.2
13.12.2010 19:28:47.296: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
13.12.2010 19:28:47.296: EstimateLayerSplitPoint()...
13.12.2010 19:28:47.312: Splitpunkt 4271833088 auf Disk mit Größe 2321022976
13.12.2010 19:28:47.312: Title an Stelle 0, Länge 131072, Typ 0
13.12.2010 19:28:47.312: Title an Stelle 131072, Länge 131072, Typ 0
13.12.2010 19:28:47.312: Title an Stelle 262144, Länge 2320760832, Typ 1
13.12.2010 19:28:47.312: ... Split möglich nach aktuellem Title, -> Abbruch
13.12.2010 19:28:48.828: Step 1 of 6, Encodiere Film 1 ...
13.12.2010 19:28:48.828: Step 1 done
13.12.2010 19:28:48.828: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image 2010-12-12\VTS_01_1.VOB
13.12.2010 19:28:48.828: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image 2010-12-12\VTS_01_2.VOB
13.12.2010 19:28:48.828: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image 2010-12-12\VTS_01_3.VOB
13.12.2010 19:28:48.843: Step 2 of 6, Erzeuge Disc-Image ...
13.12.2010 19:28:48.843: Step 2 done
13.12.2010 19:28:48.937: AVSDK Message - ERROR: :Cannot open drive -> Drive not ready (SK/ASC/ASCQ 02/04/01)
13.12.2010 19:28:48.937: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 101 - drive not ready !!!
13.12.2010 19:28:48.937: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 211 - drive not ready !!!
13.12.2010 19:28:59.921: AVSDK Message - ERROR: :Cannot open drive -> Drive not ready (SK/ASC/ASCQ 02/04/01)
13.12.2010 19:28:59.921: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 101 - drive not ready !!!
13.12.2010 19:28:59.921: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 211 - drive not ready !!!
13.12.2010 19:28:59.921: !!! DBK error in BurnProject: 211 - drive not ready !!!
13.12.2010 19:29:14.171: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
13.12.2010 19:29:14.171: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.12.2010 19:29:14.171: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.12.2010 19:29:15.828: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
13.12.2010 19:29:15.828: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.12.2010 19:29:15.828: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.12.2010 19:29:17.906: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
13.12.2010 19:29:17.906: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.12.2010 19:29:17.906: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.12.2010 19:29:17.906: Open Project: 2010-12-12 -- dvd project 2010-12-13
13.12.2010 19:29:17.906: VideoMode: PAL Temp Dir: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\
13.12.2010 19:29:17.906: dll version 4.3.6.2
13.12.2010 19:29:17.906: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
13.12.2010 19:29:17.906: EstimateLayerSplitPoint()...
13.12.2010 19:29:17.906: Splitpunkt 4271833088 auf Disk mit Größe 2321022976
13.12.2010 19:29:17.906: Title an Stelle 0, Länge 131072, Typ 0
13.12.2010 19:29:17.921: Title an Stelle 131072, Länge 131072, Typ 0
13.12.2010 19:29:17.921: Title an Stelle 262144, Länge 2320760832, Typ 1
13.12.2010 19:29:17.921: ... Split möglich nach aktuellem Title, -> Abbruch
13.12.2010 19:29:21.421: Step 1 of 6, Encodiere Film 1 ...
13.12.2010 19:29:21.421: Step 1 done
13.12.2010 19:29:21.421: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image 2010-12-12\VTS_01_1.VOB
13.12.2010 19:29:21.421: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image 2010-12-12\VTS_01_2.VOB
13.12.2010 19:29:21.421: ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\DVD Image 2010-12-12\VTS_01_3.VOB
13.12.2010 19:29:21.421: Step 2 of 6, Erzeuge Disc-Image ...
13.12.2010 19:29:21.421: Step 2 done
13.12.2010 19:29:21.500: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
13.12.2010 19:29:21.500: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.12.2010 19:29:21.500: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.12.2010 19:29:40.359: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
13.12.2010 19:29:40.359: DEVICE REMOVAL
13.12.2010 19:29:40.390: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
13.12.2010 19:29:40.390: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.12.2010 19:29:40.390: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.12.2010 19:29:44.796: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
13.12.2010 19:29:44.796: DEVICE ARRIVED
13.12.2010 19:29:44.843: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
13.12.2010 19:29:44.843: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.12.2010 19:29:44.843: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.12.2010 19:29:44.937: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
13.12.2010 19:29:44.937: DEVICE REMOVAL
13.12.2010 19:29:59.890: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
13.12.2010 19:29:59.890: DEVICE REMOVAL
13.12.2010 19:29:59.921: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
13.12.2010 19:29:59.921: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.12.2010 19:29:59.921: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.12.2010 19:30:03.906: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
13.12.2010 19:30:03.906: DEVICE ARRIVED
13.12.2010 19:30:03.937: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
13.12.2010 19:30:03.937: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.12.2010 19:30:03.937: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.12.2010 19:30:03.968: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
13.12.2010 19:30:03.968: DEVICE REMOVAL
13.12.2010 19:30:28.296: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
13.12.2010 19:30:28.296: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.12.2010 19:30:28.296: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.12.2010 19:30:32.015: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
13.12.2010 19:30:32.015: DEVICE REMOVAL
13.12.2010 19:30:32.796: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
13.12.2010 19:30:32.796: DEVICE ARRIVED
13.12.2010 19:30:32.843: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
13.12.2010 19:30:32.843: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.12.2010 19:30:32.843: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.12.2010 19:30:32.890: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
13.12.2010 19:30:32.890: DEVICE REMOVAL
13.12.2010 19:30:40.312: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
13.12.2010 19:30:40.312: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.12.2010 19:30:40.312: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.12.2010 19:31:07.312: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
13.12.2010 19:31:07.328: DEVICE REMOVAL
13.12.2010 19:31:07.359: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
13.12.2010 19:31:07.359: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.12.2010 19:31:07.359: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.12.2010 19:31:11.828: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
13.12.2010 19:31:11.828: DEVICE ARRIVED
13.12.2010 19:31:11.859: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
13.12.2010 19:31:11.859: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.12.2010 19:31:11.859: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.12.2010 19:31:11.890: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
13.12.2010 19:31:11.890: DEVICE REMOVAL
13.12.2010 19:31:44.843: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
13.12.2010 19:31:44.843: DEVICE REMOVAL
13.12.2010 19:31:46.812: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
13.12.2010 19:31:46.828: DEVICE ARRIVED
13.12.2010 19:32:56.750: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
13.12.2010 19:32:56.750: DEVICE REMOVAL
13.12.2010 19:32:56.781: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
13.12.2010 19:32:56.781: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.12.2010 19:32:56.781: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.12.2010 19:33:00.796: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
13.12.2010 19:33:00.796: DEVICE ARRIVED
13.12.2010 19:33:00.843: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
13.12.2010 19:33:00.843: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
13.12.2010 19:33:00.843: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.12.2010 19:33:00.984: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
13.12.2010 19:33:00.984: DEVICE REMOVAL
13.12.2010 19:33:03.640: !!! DBK error in BurnProject: 1 - user cancelled operation !!!

-------------------------- 09.01.2011 17:07:32 --------------------------

09.01.2011 17:07:32.593: DLLAV32.DLL loaded, all entry points available
09.01.2011 17:07:32.593: AVSDK MsgCbFunc registered
09.01.2011 17:07:32.593: AVSDK: StatCbFunc registered
09.01.2011 17:07:32.656: AVSDK Version 9.0.193
09.01.2011 17:07:32.656: ------------ Reading Device Info ----------------
09.01.2011 17:07:32.656: AVSDK: 3 device(s) found
09.01.2011 17:07:32.656: Adapter=0 ID=0 LUN=0 D:HL-DT-ST DVDRAM GSA-H44N Revision:RB01
09.01.2011 17:07:32.656: Adapter=0 ID=1 LUN=0 E:HL-DT-ST DVD-RAM GSA-H55L Revision:1.05
09.01.2011 17:07:32.656: Adapter=6 ID=1 LUN=0 G:VXDV DVD-RAM DVDR S95 Revision:9.00
09.01.2011 17:07:32.656: AVSDK: 3 record device(s) available
09.01.2011 17:07:32.671: ------------ done ----------------
09.01.2011 17:07:32.750: setting no speed limit
09.01.2011 17:07:32.750: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
09.01.2011 17:07:32.781: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
09.01.2011 17:07:32.781: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
09.01.2011 17:07:32.781: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
09.01.2011 17:08:09.718: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
09.01.2011 17:08:09.718: DEVICE ARRIVED
09.01.2011 17:08:09.718: AVSDK Message - ERROR: :Cannot open drive -> error code 14
09.01.2011 17:08:09.718: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
09.01.2011 17:08:09.718: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 202 - bad address given as parameter !!!
09.01.2011 17:08:09.906: Open Project: Weihnachten_2010_bei_uns -- dvd project 2011-01-09
09.01.2011 17:08:09.906: VideoMode: PAL Temp Dir: C:\Dokumente und Einstellungen\Bernd\Eigene Dateien\MAGIX_Video_deluxe_16\Disc Images\
09.01.2011 17:08:09.906: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
09.01.2011 17:08:09.906: dll version 4.3.6.2
09.01.2011 17:08:09.906: DEVICE ARRIVED
09.01.2011 17:08:09.921: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
09.01.2011 17:08:09.937: EstimateLayerSplitPoint()...
09.01.2011 17:08:09.937: Splitpunkt 4271833088 auf Disk mit Größe 2153807872
09.01.2011 17:08:09.937: Title an Stelle 0, Länge 131072, Typ 0
09.01.2011 17:08:09.937: Title an Stelle 131072, Länge 131072, Typ 0
09.01.2011 17:08:09.937: Title an Stelle 262144, Länge 2153545728, Typ 1
09.01.2011 17:08:09.937: ... Split möglich nach aktuellem Title, -> Abbruch
09.01.2011 17:08:09.937: Step 1 of 6, Encodiere Film 1 ...
09.01.2011 17:14:53.984: Step 1 done
09.01.2011 17:14:53.984: ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
09.01.2011 17:14:53.984: !!! DBK error in BurnProject: 10 - movie encoding failed !!!

-------------------------- 16.01.2011 19:56:32 --------------------------

16.01.2011 19:56:32.437: DLLAV32.DLL loaded, all entry points available
16.01.2011 19:56:32.437: AVSDK MsgCbFunc registered
16.01.2011 19:56:32.437: AVSDK: StatCbFunc registered
16.01.2011 19:56:32.500: AVSDK Version 9.0.193
16.01.2011 19:56:32.500: ------------ Reading Device Info ----------------
16.01.2011 19:56:32.500: AVSDK: 3 device(s) found
16.01.2011 19:56:32.500: Adapter=0 ID=0 LUN=0 D:HL-DT-ST DVDRAM GSA-H44N Revision:RB01
16.01.2011 19:56:32.500: Adapter=0 ID=1 LUN=0 E:HL-DT-ST DVD-RAM GSA-H55L Revision:1.05
16.01.2011 19:56:32.500: Adapter=6 ID=1 LUN=0 G:VXDV DVD-RAM DVDR S95 Revision:9.00
16.01.2011 19:56:32.500: AVSDK: 3 record device(s) available
16.01.2011 19:56:32.500: ------------ done ----------------
16.01.2011 19:56:32.578: setting no speed limit
16.01.2011 19:56:32.593: !!! DBK error in CBur

Kommentare

geschi schrieb am 17.01.2011 um 11:22 Uhr

Was soll den das, einen Brennversuch vom April 2010, toll, dafür der letzte nicht vollstäding!!!

lösche dieses Posting, nur den letzten Versuch hier hochladen.

NACHTRAG: Schalte einmal dein Menü komplett aus und probiere nochmals.

geschi schrieb am 17.01.2011 um 16:22 Uhr

Was wählst du wenn die Abfrage kommt, "Alles verwenden" oder "Alles encodieren"?

NACHTRAG:

1. Man verwendet RW wenn man sich nicht sicher ist!!

2. Da haben wir doch schon deinen Fehler:

und 'alles verwenden' angeklickt,....

Ja wie soll den da das Programm nach Änderungen klar kommen????

Alles Encodieren, sollst du wählen!

geschi schrieb am 18.01.2011 um 10:38 Uhr

Immer noch das Menü nicht abgeschaltet!!

Jetzt wird es schön langsam eintönig, du solltest das Menü abschalten und "alles Encodieren" wählen.