Hallo zusammen,
da bin ich nochmal. Habe ein Problem - klar sonst würde ich ja nicht schreiben :-)
Hatte zwar die DVD jetzt gebrannt mit einem anderen DVD Rohling aber meine Schwester hat noch einige Fehler gefunden, sodass ich einiges ändern musste.
Allerdings habe ich jetzt wieder beim brennen einen Fehler dbk.log anbei. Habe schon DVD+R und DVD-R und dann wieder DVD+R versucht. Aber leider nutzte das nichts.
Wäre lieb wenn ihr mir erneut helfen könntet
LG
Sandra
09.08.2012 17:01:33.054: DLLAV32.DLL loaded, all entry points available
09.08.2012 17:01:33.059: AVSDK MsgCbFunc registered
09.08.2012 17:01:33.063: AVSDK: StatCbFunc registered
09.08.2012 17:01:33.116: AVSDK Version 9.0.193
09.08.2012 17:01:33.121: ------------ Reading Device Info ----------------
09.08.2012 17:01:33.126: AVSDK: 1 device(s) found
09.08.2012 17:01:33.130: Adapter=0 ID=1 LUN=0 E:HL-DT-ST DVDRAM GT40N Revision:1.00
09.08.2012 17:01:33.135: AVSDK: 1 record device(s) available
09.08.2012 17:01:33.140: ------------ done ----------------
09.08.2012 17:01:33.867: setting no speed limit
09.08.2012 17:01:33.872: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
09.08.2012 17:01:44.019: Open Project: Mama_70__Geb -- dvd project 2012-08-09
09.08.2012 17:01:44.024: VideoMode: PAL Temp Dir: C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\
09.08.2012 17:01:44.029: dll version 4.5.6.2
09.08.2012 17:01:44.036: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
09.08.2012 17:01:44.041: EstimateLayerSplitPoint()...
09.08.2012 17:01:44.133: Splitpunkt 4271833088 auf Disk mit Größe 2933555200
09.08.2012 17:01:44.138: Title an Stelle 0, Länge 131072, Typ 0
09.08.2012 17:01:44.142: Title an Stelle 131072, Länge 131072, Typ 0
09.08.2012 17:01:44.146: Title an Stelle 262144, Länge 2933293056, Typ 1
09.08.2012 17:01:44.151: ... Split möglich nach aktuellem Title, -> Abbruch
09.08.2012 17:02:17.159: Step 1 of 6, Encodiere Film 1 ...
09.08.2012 17:35:40.386: Step 1 done
09.08.2012 17:35:40.593: Step 2 of 6, Encodiere Filmmenü ...
09.08.2012 17:35:41.516: Step 2 done
09.08.2012 17:35:41.526: Step 3 of 6, Encodiere Kapitelmenü 1 ...
09.08.2012 17:35:41.534: Step 3 done
09.08.2012 17:35:41.549: ConvertMovie() - encoded file: C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_1.VOB
09.08.2012 17:35:41.559: ConvertMovie() - encoded file: C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_2.VOB
09.08.2012 17:35:41.568: ConvertMovie() - encoded file: C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_3.VOB
09.08.2012 17:35:41.582: Step 4 of 6, Disc Image wird erzeugt...
09.08.2012 17:37:02.775: Step 4 done
09.08.2012 17:37:08.484: Step 5 of 6
09.08.2012 17:37:08.508: Step 5 done
09.08.2012 17:37:08.517: ------------ InitializeBurningProcess Point ----------------
09.08.2012 17:37:08.559: setting PoINT cache size to 16777216l
09.08.2012 17:37:08.564: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
09.08.2012 17:37:08.569: Booktype: don't care
09.08.2012 17:37:08.579: setting write speed to 3324000 bytes/sec
09.08.2012 17:37:08.583: this equals 2,400000x DVD / 18,843538x CD Speed
09.08.2012 17:37:08.587: ------------ done: succeeded ----------------
09.08.2012 17:37:08.592: ------------ CreateAPIProject ----------------
09.08.2012 17:37:08.599: Step 6 of 6
09.08.2012 17:37:08.608: creating DVD project in prepfile mode...
09.08.2012 17:37:08.617: create volume... OK
09.08.2012 17:37:08.622: verify option OFF
09.08.2012 17:37:08.627: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VIDEO_TS.IFO"
09.08.2012 17:37:08.636: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VIDEO_TS.VOB"
09.08.2012 17:37:08.643: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_1.VOB"
09.08.2012 17:37:08.650: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_2.VOB"
09.08.2012 17:37:08.659: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_3.VOB"
09.08.2012 17:37:08.666: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_0.IFO"
09.08.2012 17:37:08.673: Step 6 done
09.08.2012 17:37:08.681: ------------ done ----------------
09.08.2012 17:37:08.685: ------------ BurnToDisc ----------------
09.08.2012 17:37:08.690: Step 6 of 6
09.08.2012 17:37:08.700: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
09.08.2012 17:37:08.705: Booktype: don't care
09.08.2012 17:37:08.709: setting write speed to 3324000 bytes/sec
09.08.2012 17:37:08.714: this equals 2,400000x DVD / 18,843538x CD Speed
09.08.2012 17:37:08.718: Check on previously direct recorded session...OK
09.08.2012 17:37:08.722: -- Volume mounted --
09.08.2012 17:37:08.726: -- Recording on "E: HL-DT-ST DVDRAM GT40N" --
09.08.2012 17:37:08.730: -- Medium is "DVD+R" --
09.08.2012 17:37:08.734: -- Manufacturer "MCC" --
09.08.2012 17:37:08.761: AVSDK Message - INFO: :Recording volume ...
09.08.2012 17:37:08.765: AVSDK Status - Begin operation Recording 1209408 sectors/frames
09.08.2012 17:37:08.772: AVSDK Message - INFO: :Recording -> writing data ...
09.08.2012 17:37:09.295: wrote LeadIn, start DataCopy
09.08.2012 18:08:55.607: AVSDK Message - ERROR: :Cannot write to disc -> Power on, reset, or bus device reset occurred, possibly caused by malfunction of host adapter or drive (SK/ASC/ASCQ 06/29/00)
09.08.2012 18:08:55.703: AVSDK Message - ERROR: :Cannot write or close track -> Drive not ready (SK/ASC/ASCQ 02/04/01)
09.08.2012 18:09:32.692: AVSDK Status - End operation Recording 1209408 sectors/frames
09.08.2012 18:09:32.694: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
09.08.2012 18:09:32.696: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 100 - drive not fully supported !!!
09.08.2012 18:09:32.697: Step 6 done
09.08.2012 18:09:32.700: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 210 - drive not fully supported !!!
09.08.2012 18:09:32.702: ------------ done ----------------
09.08.2012 18:09:32.703: project burning failed
09.08.2012 18:09:32.857: !!! DBK error in CBurnDevSupport::BurnProject(): 210 - drive not fully supported !!!
09.08.2012 18:09:32.862: !!! DBK error in BurnProject: 210 - drive not fully supported !!!
09.08.2012 18:14:02.414: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
09.08.2012 18:14:02.420: DEVICE REMOVAL
09.08.2012 18:14:41.301: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
09.08.2012 18:16:03.582: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
09.08.2012 18:16:13.697: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
09.08.2012 18:16:13.703: DEVICE REMOVAL
09.08.2012 18:17:33.764: Open Project: Mama_70__Geb -- dvd project 2012-08-09
09.08.2012 18:17:33.769: VideoMode: PAL Temp Dir: C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\
09.08.2012 18:17:33.773: dll version 4.5.6.2
09.08.2012 18:17:33.782: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
09.08.2012 18:17:33.787: EstimateLayerSplitPoint()...
09.08.2012 18:17:33.880: Splitpunkt 4271833088 auf Disk mit Größe 2933555200
09.08.2012 18:17:33.885: Title an Stelle 0, Länge 131072, Typ 0
09.08.2012 18:17:33.889: Title an Stelle 131072, Länge 131072, Typ 0
09.08.2012 18:17:33.893: Title an Stelle 262144, Länge 2933293056, Typ 1
09.08.2012 18:17:33.897: ... Split möglich nach aktuellem Title, -> Abbruch
09.08.2012 18:17:38.104: Step 1 of 6, Encodiere Film 1 ...
09.08.2012 18:51:03.869: Step 1 done
09.08.2012 18:51:03.942: Step 2 of 6, Encodiere Filmmenü ...
09.08.2012 18:51:04.522: Step 2 done
09.08.2012 18:51:04.531: Step 3 of 6, Encodiere Kapitelmenü 1 ...
09.08.2012 18:51:04.539: Step 3 done
09.08.2012 18:51:04.563: ConvertMovie() - encoded file: C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_1.VOB
09.08.2012 18:51:04.567: ConvertMovie() - encoded file: C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_2.VOB
09.08.2012 18:51:04.572: ConvertMovie() - encoded file: C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_3.VOB
09.08.2012 18:51:04.579: Step 4 of 6, Disc Image wird erzeugt...
09.08.2012 18:52:28.191: Step 4 done
09.08.2012 18:52:33.736: Step 5 of 6
09.08.2012 18:52:33.744: Step 5 done
09.08.2012 18:52:33.753: ------------ InitializeBurningProcess Point ----------------
09.08.2012 18:52:33.800: setting PoINT cache size to 16777216l
09.08.2012 18:52:33.806: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
09.08.2012 18:52:33.810: Booktype: don't care
09.08.2012 18:52:33.820: setting write speed to 2770000 bytes/sec
09.08.2012 18:52:33.824: this equals 2,000000x DVD / 15,702948x CD Speed
09.08.2012 18:52:33.828: ------------ done: succeeded ----------------
09.08.2012 18:52:33.832: ------------ CreateAPIProject ----------------
09.08.2012 18:52:33.839: Step 6 of 6
09.08.2012 18:52:33.846: creating DVD project in prepfile mode...
09.08.2012 18:52:33.855: create volume... OK
09.08.2012 18:52:33.877: verify option OFF
09.08.2012 18:52:33.882: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VIDEO_TS.IFO"
09.08.2012 18:52:33.889: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VIDEO_TS.VOB"
09.08.2012 18:52:33.897: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_1.VOB"
09.08.2012 18:52:33.904: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_2.VOB"
09.08.2012 18:52:33.911: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_3.VOB"
09.08.2012 18:52:33.920: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_0.IFO"
09.08.2012 18:52:33.927: Step 6 done
09.08.2012 18:52:33.946: ------------ done ----------------
09.08.2012 18:52:33.951: ------------ BurnToDisc ----------------
09.08.2012 18:52:33.955: Step 6 of 6
09.08.2012 18:52:33.965: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
09.08.2012 18:52:33.970: Booktype: don't care
09.08.2012 18:52:33.975: setting write speed to 2770000 bytes/sec
09.08.2012 18:52:33.979: this equals 2,000000x DVD / 15,702948x CD Speed
09.08.2012 18:52:33.984: Check on previously direct recorded session...OK
09.08.2012 18:52:33.988: -- Volume mounted --
09.08.2012 18:52:33.993: -- Recording on "E: HL-DT-ST DVDRAM GT40N" --
09.08.2012 18:52:33.998: -- Medium is "DVD-R" --
09.08.2012 18:52:34.002: -- Manufacturer "CMC MAG. AM3" --
09.08.2012 18:52:34.022: AVSDK Message - INFO: :Recording volume ...
09.08.2012 18:52:34.028: AVSDK Status - Begin operation Recording 1209424 sectors/frames
09.08.2012 18:52:34.035: AVSDK Message - INFO: :Recording -> writing data ...
09.08.2012 18:52:34.558: wrote LeadIn, start DataCopy
09.08.2012 18:55:05.133: AVSDK Message - ERROR: :Cannot write to disc -> Logical block address out of range (SK/ASC/ASCQ 05/21/02)
09.08.2012 19:03:07.666: AVSDK Status - End operation Recording 1209424 sectors/frames
09.08.2012 19:03:07.668: AVSDK Message - INFO: :Recording failed due to write error on disc
09.08.2012 19:03:07.670: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
09.08.2012 19:03:07.671: Step 6 done
09.08.2012 19:03:07.674: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 224 - write error occurred on disc !!!
09.08.2012 19:03:07.676: ------------ done ----------------
09.08.2012 19:03:07.677: project burning failed
09.08.2012 19:03:07.682: !!! DBK error in CBurnDevSupport::BurnProject(): 224 - write error occurred on disc !!!
09.08.2012 19:03:07.686: !!! DBK error in BurnProject: 224 - write error occurred on disc !!!
09.08.2012 20:03:45.693: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
09.08.2012 20:03:45.696: DEVICE REMOVAL
-------------------------- 09.08.2012 20:18:52 --------------------------
09.08.2012 20:18:52.436: DLLAV32.DLL loaded, all entry points available
09.08.2012 20:18:52.440: AVSDK MsgCbFunc registered
09.08.2012 20:18:52.443: AVSDK: StatCbFunc registered
09.08.2012 20:18:52.480: AVSDK Version 9.0.193
09.08.2012 20:18:52.483: ------------ Reading Device Info ----------------
09.08.2012 20:18:52.487: AVSDK: 1 device(s) found
09.08.2012 20:18:52.491: Adapter=0 ID=1 LUN=0 E:HL-DT-ST DVDRAM GT40N Revision:1.00
09.08.2012 20:18:52.496: AVSDK: 1 record device(s) available
09.08.2012 20:18:52.500: ------------ done ----------------
09.08.2012 20:18:53.143: setting no speed limit
09.08.2012 20:18:53.150: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
09.08.2012 20:20:17.726: setting no speed limit
09.08.2012 20:35:54.463: setting no speed limit
09.08.2012 20:53:28.782: setting no speed limit
09.08.2012 20:53:42.054: Open Project: Mama_70__Geb -- dvd project 2012-08-09
09.08.2012 20:53:42.058: VideoMode: PAL Temp Dir: C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\
09.08.2012 20:53:42.063: dll version 4.5.6.2
09.08.2012 20:53:42.072: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
09.08.2012 20:53:42.076: EstimateLayerSplitPoint()...
09.08.2012 20:53:42.169: Splitpunkt 4271833088 auf Disk mit Größe 2927689728
09.08.2012 20:53:42.173: Title an Stelle 0, Länge 131072, Typ 0
09.08.2012 20:53:42.177: Title an Stelle 131072, Länge 131072, Typ 0
09.08.2012 20:53:42.181: Title an Stelle 262144, Länge 2927427584, Typ 1
09.08.2012 20:53:42.185: ... Split möglich nach aktuellem Title, -> Abbruch
09.08.2012 20:53:46.904: Step 1 of 6, Encodiere Film 1 ...
09.08.2012 21:26:21.523: Step 1 done
09.08.2012 21:26:21.595: Step 2 of 6, Encodiere Filmmenü ...
09.08.2012 21:26:22.416: Step 2 done
09.08.2012 21:26:22.423: Step 3 of 6, Encodiere Kapitelmenü 1 ...
09.08.2012 21:26:22.430: Step 3 done
09.08.2012 21:26:22.443: ConvertMovie() - encoded file: C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_1.VOB
09.08.2012 21:26:22.447: ConvertMovie() - encoded file: C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_2.VOB
09.08.2012 21:26:22.451: ConvertMovie() - encoded file: C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_3.VOB
09.08.2012 21:26:22.484: Step 4 of 6, Disc Image wird erzeugt...
09.08.2012 21:27:44.341: Step 4 done
09.08.2012 21:27:50.046: Step 5 of 6
09.08.2012 21:27:50.053: Step 5 done
09.08.2012 21:27:50.063: ------------ InitializeBurningProcess Point ----------------
09.08.2012 21:27:50.105: setting PoINT cache size to 16777216l
09.08.2012 21:27:50.120: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
09.08.2012 21:27:50.125: Booktype: don't care
09.08.2012 21:27:50.135: setting write speed to 3324000 bytes/sec
09.08.2012 21:27:50.139: this equals 2,400000x DVD / 18,843538x CD Speed
09.08.2012 21:27:50.143: ------------ done: succeeded ----------------
09.08.2012 21:27:50.328: ------------ CreateAPIProject ----------------
09.08.2012 21:27:50.335: Step 6 of 6
09.08.2012 21:27:50.342: creating DVD project in prepfile mode...
09.08.2012 21:27:50.350: create volume... OK
09.08.2012 21:27:50.356: verify option OFF
09.08.2012 21:27:50.360: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VIDEO_TS.IFO"
09.08.2012 21:27:50.367: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VIDEO_TS.VOB"
09.08.2012 21:27:50.375: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_1.VOB"
09.08.2012 21:27:50.383: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_2.VOB"
09.08.2012 21:27:50.390: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_3.VOB"
09.08.2012 21:27:50.397: adding file "C:\Users\Sandra\Documents\MAGIX\Video_deluxe_17_Plus\Disc Images\DVD Image Mama_70__Geb\VTS_01_0.IFO"
09.08.2012 21:27:50.405: Step 6 done
09.08.2012 21:27:50.411: ------------ done ----------------
09.08.2012 21:27:50.475: ------------ BurnToDisc ----------------
09.08.2012 21:27:50.479: Step 6 of 6
09.08.2012 21:27:50.489: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
09.08.2012 21:27:50.494: Booktype: don't care
09.08.2012 21:27:50.498: setting write speed to 3324000 bytes/sec
09.08.2012 21:27:50.503: this equals 2,400000x DVD / 18,843538x CD Speed
09.08.2012 21:27:50.508: Check on previously direct recorded session...OK
09.08.2012 21:27:50.512: -- Volume mounted --
09.08.2012 21:27:50.516: -- Recording on "E: HL-DT-ST DVDRAM GT40N" --
09.08.2012 21:27:50.520: -- Medium is "DVD+R" --
09.08.2012 21:27:50.524: -- Manufacturer "MCC" --
09.08.2012 21:27:50.573: AVSDK Message - INFO: :Recording volume ...
09.08.2012 21:27:50.578: AVSDK Status - Begin operation Recording 1207376 sectors/frames
09.08.2012 21:27:50.585: AVSDK Message - INFO: :Recording -> writing data ...
09.08.2012 21:27:51.185: wrote LeadIn, start DataCopy
09.08.2012 21:30:59.589: AVSDK Message - ERROR: :Cannot write to disc -> Power on, reset, or bus device reset occurred, possibly caused by malfunction of host adapter or drive (SK/ASC/ASCQ 06/29/00)
09.08.2012 21:30:59.832: AVSDK Message - ERROR: :Cannot write or close track -> Drive not ready (SK/ASC/ASCQ 02/04/01)
09.08.2012 21:31:33.289: AVSDK Status - End operation Recording 1207376 sectors/frames
09.08.2012 21:31:33.291: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
09.08.2012 21:31:33.293: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 100 - drive not fully supported !!!
09.08.2012 21:31:33.294: Step 6 done
09.08.2012 21:31:33.297: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 210 - drive not fully supported !!!
09.08.2012 21:31:33.299: ------------ done ----------------
09.08.2012 21:31:33.301: project burning failed
09.08.2012 21:31:33.454: !!! DBK error in CBurnDevSupport::BurnProject(): 210 - drive not fully supported !!!
09.08.2012 21:31:33.457: !!! DBK error in BurnProject: 210 - drive not fully supported !!!