Capture/Record mini DV via FireWire

Thord-Hyllander schrieb am 02.05.2022 um 00:00 Uhr

Hi , I have a test version of Movie Studio 2022 and Windows 10 Home

Are there limitation in the test trail version of Movie Studio 2022 to record och capture videos from my Sony DCR-PC350E miniDV via iLink/firewire . The SW Movie Studio just say "Could not connect to selected device". Use the File, DV recording tabs

KR

Thord

Kommentare

AAProds schrieb am 02.05.2022 um 06:26 Uhr

@Thord-Hyllander

First off, make sure your Firewire drivers are up to date.

See this post to update them:

https://www.startech.com/en-us/faq/firewire-cards-windows-legacy-driver-swap

More detailed info on Firewire here:

https://www.studio1productions.com/Articles/Firewire-1.htm

Zuletzt geändert von AAProds am 02.05.2022, 06:34, insgesamt 1-mal geändert.

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Bluray Burner: Pioneer BDR-212D

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2025

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12

Thord-Hyllander schrieb am 02.05.2022 um 07:57 Uhr

Thanks it works now with the startech driver update amazing 😀

AAProds schrieb am 02.05.2022 um 09:47 Uhr

@Thord-Hyllander

Good oh! Yes, I like that Startech procedure. Nice and simple. Good luck with your DV editing. MEP loves DV; it was the first video format the program dealt with. I have fond memories of using DV with MEP.

Zuletzt geändert von AAProds am 02.05.2022, 09:48, insgesamt 1-mal geändert.

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Bluray Burner: Pioneer BDR-212D

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Movie Studio 2025

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 v22H2

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

MEP 2021 version 20.0.1.80

Movie Studio 2023 version 22.0.3.172

VPX 12