Folgendes Problem mit MAGIX Video delux besteht seit ca. 6 Wochen:
die Datei wird geschrieben aber nicht mit lead out abgeschlossen. Programm wird nicht beendet, LW-Schublade wird nicht geöffnet.
Die CD/DVD ist auf DVD-Player nicht abspielbar.
Habe Video delux deinstalliert und wieder installiert: Keine Veränderung.
Beigefügt die log-Datei.
Brennen mit anderen Programmen funktioniert. System Wndows 7 Professional, 64 Bit
dbklog vom 7.2.16
-------------------------- 07.02.2016 11:10:24 --------------------------
07.02.2016 11:10:24.506: DLLAV32.DLL loaded, all entry points available
07.02.2016 11:10:24.506: AVSDK MsgCbFunc registered
07.02.2016 11:10:24.506: AVSDK: StatCbFunc registered
07.02.2016 11:10:34.678: AVSDK Version 11.0.226
07.02.2016 11:10:34.678: ------------ Reading Device Info ----------------
07.02.2016 11:10:34.678: AVSDK: 2 device(s) found
07.02.2016 11:10:34.678: BurnSupport: 2 device(s) found
07.02.2016 11:10:34.678: Adapter=2 ID=0 LUN=0 E:HL-DT-ST DVDRAM GH24NS95 Revision:RN00
07.02.2016 11:10:34.678: Adapter=3 ID=0 LUN=16 F:HL-DT-ST DVDRAM GH24NSC0 Revision:LK00
07.02.2016 11:10:34.678: BurnSupport: 2 record device(s) available
07.02.2016 11:10:34.678: BurnSupport: E: HL-DT-ST DVDRAM GH24NS95 Rev. RN00
07.02.2016 11:10:34.678: BurnSupport: F: HL-DT-ST DVDRAM GH24NSC0 Rev. LK00
07.02.2016 11:10:34.678: ------------ done ----------------
07.02.2016 11:10:34.943: setting no speed limit
07.02.2016 11:10:34.943: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
07.02.2016 11:10:34.974: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
07.02.2016 11:10:34.974: !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
07.02.2016 11:10:34.974: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
07.02.2016 11:10:49.336: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
07.02.2016 11:10:56.536: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
07.02.2016 11:10:58.673: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
07.02.2016 11:10:58.689: Open Project: 4_1_2016 -- dvd project 2016-02-07
07.02.2016 11:10:58.689: VideoMode: PAL Temp Dir: C:\Users\HW\Documents\MAGIX\Video deluxe 2013\Disc Images\
07.02.2016 11:10:58.689: dll version 5.0.0.1
07.02.2016 11:11:06.988: Step 1 of 5, Encodiere Film 1 ...
07.02.2016 11:13:45.267: Step 1 done
07.02.2016 11:13:45.267: Step 2 of 5, Encodiere Filmmenü ...
07.02.2016 11:13:51.101: Step 2 done
07.02.2016 11:13:51.101: Step 3 of 5, Encodiere Kapitelmenü 1 ...
07.02.2016 11:13:51.101: Step 3 done
07.02.2016 11:13:51.117: ConvertMovie() - encoded file: C:\Users\HW\Documents\MAGIX\Video deluxe 2013\Disc Images\MDVD Image 4_1_2016\VTS_01_1.VOB
07.02.2016 11:13:51.117: Step 4 of 5, Disc Image wird erzeugt...
07.02.2016 11:13:52.022: Step 4 done
07.02.2016 11:13:53.972: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
07.02.2016 11:13:56.109: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
07.02.2016 11:13:56.125: Step 5 of 5
07.02.2016 11:13:56.125: Step 5 done
07.02.2016 11:13:56.125: requested recorder feature:
07.02.2016 11:13:56.125: cache size: 16,000000.1 MB
07.02.2016 11:13:56.125: write speed: 2755,859375.1 KB/s
07.02.2016 11:13:56.125: book type: 0
07.02.2016 11:13:56.125: burn over: no
07.02.2016 11:13:56.125: simulate: no
07.02.2016 11:13:56.125: disc at once: no
07.02.2016 11:13:56.125: burn proof: yes
07.02.2016 11:13:56.125: format disc: no
07.02.2016 11:13:56.125: short leadout: no
07.02.2016 11:13:56.140: no defect mgmt: no
07.02.2016 11:13:56.140: verify after burn:no
07.02.2016 11:13:56.140: ------------ OpenRecorderSetOptions Point ----------------
07.02.2016 11:13:56.218: setting PoINT cache size to 16777216l
07.02.2016 11:13:56.218: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
07.02.2016 11:13:56.218: Booktype: don't care
07.02.2016 11:13:56.234: setting write speed to 2822000 bytes/sec
07.02.2016 11:13:56.234: this equals 2,037545x DVD / 15,997732x CD Speed
07.02.2016 11:13:56.234: ------------ done: succeeded ----------------
07.02.2016 11:13:56.234: ------------ CreateAPIProject ----------------
07.02.2016 11:13:56.234: Step 5 of 5
07.02.2016 11:13:56.234: creating DVD project in prepfile mode...
07.02.2016 11:13:56.249: create volume... OK
07.02.2016 11:13:56.249: verify option OFF
07.02.2016 11:13:56.249: set project options... OK
07.02.2016 11:13:56.249: adding file "C:\Users\HW\Documents\MAGIX\Video deluxe 2013\Disc Images\MDVD Image 4_1_2016\VIDEO_TS.IFO"
07.02.2016 11:13:56.249: adding file "C:\Users\HW\Documents\MAGIX\Video deluxe 2013\Disc Images\MDVD Image 4_1_2016\VIDEO_TS.VOB"
07.02.2016 11:13:56.249: adding file "C:\Users\HW\Documents\MAGIX\Video deluxe 2013\Disc Images\MDVD Image 4_1_2016\VTS_01_1.VOB"
07.02.2016 11:13:56.249: adding file "C:\Users\HW\Documents\MAGIX\Video deluxe 2013\Disc Images\MDVD Image 4_1_2016\VTS_01_0.IFO"
07.02.2016 11:13:56.249: Step 5 done
07.02.2016 11:13:56.265: ------------ done ----------------
07.02.2016 11:13:56.265: Step 5 of 5
07.02.2016 11:13:56.265: ------------ BurnToDisc ----------------
07.02.2016 11:13:56.265: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
07.02.2016 11:13:56.265: Booktype: don't care
07.02.2016 11:13:56.265: setting write speed to 2822000 bytes/sec
07.02.2016 11:13:56.265: this equals 2,037545x DVD / 15,997732x CD Speed
07.02.2016 11:13:56.265: mounting volume on device...OK
07.02.2016 11:13:56.265: Check on previously direct recorded session...OK
07.02.2016 11:13:56.265: -- Volume mounted --
07.02.2016 11:13:56.265: -- Recording on "F: HL-DT-ST DVDRAM GH24NSC0" --
07.02.2016 11:13:56.265: -- Medium is "CD-R" --
07.02.2016 11:13:56.265: -- Manufacturer "" --
07.02.2016 11:13:56.296: AVSDK Message - INFO: :Recording volume ...
07.02.2016 11:13:56.296: AVSDK Status - Begin operation Recording 87424 sectors/frames
07.02.2016 11:13:56.296: AVSDK Message - INFO: :Recording -> writing data ...
07.02.2016 11:13:56.452: wrote LeadIn, start DataCopy
07.02.2016 11:15:09.554: writing leadout and closing disc
07.02.2016 11:22:17.057: AVSDK Message - ERROR: :Cannot write or close track -> Drive not ready (SK/ASC/ASCQ 02/04/08)
07.02.2016 11:22:20.785: AVSDK Status - End operation Recording 87424 sectors/frames
07.02.2016 11:22:20.785: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
07.02.2016 11:22:20.801: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 101 - drive not ready !!!
07.02.2016 11:22:20.801: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 211 - drive not ready !!!
07.02.2016 11:22:20.801: ------------ done ----------------
07.02.2016 11:22:20.801: Step 5 done
07.02.2016 11:22:20.801: project burning failed
07.02.2016 11:22:20.817: !!! DBK error in CBurnDevSupport::BurnProject(): 211 - drive not ready !!!
07.02.2016 11:22:20.817: !!! DBK error in BurnProject: 211 - drive not ready !!!
07.02.2016 11:55:18.703: setting no speed limit
07.02.2016 11:55:18.734: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
07.02.2016 11:55:18.734: !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
07.02.2016 11:55:18.734: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!