Habe o.g. Problem mit Magix Fotostory 2015 Deluxe genauso wie mit Video deluxe 2015 , was ich mir angeschafft habe, weil auch die Online-Hilfe von Magix keine Lösung des Problems anbieten kann.
Windows 7 , 64 bit, 8,0 GB RAM, Intel Core i7 CPU
Nachfolgend die Fehlermeldung:
Video deluxe 2ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
14.03.2015 15:38:41.288: !!! DBK error in BurnProject: 10 - movie encoding failed !!!015, Version 14.0.0172 (UDPP3)
Suche die dbk.log Datei und kopiere den letzten Versuch hier rein.
14.02.2015 07:32:31.931: DLLAV32.DLL loaded, all entry points available
14.02.2015 07:32:32.017: AVSDK MsgCbFunc registered
14.02.2015 07:32:32.017: AVSDK: StatCbFunc registered
14.02.2015 07:32:32.197: AVSDK Version 11.0.238
14.02.2015 07:32:32.198: ------------ Reading Device Info ----------------
14.02.2015 07:32:32.198: AVSDK: 2 device(s) found
14.02.2015 07:32:32.198: BurnSupport: 2 device(s) found
14.02.2015 07:32:32.199: Adapter=0 ID=0 LUN=0 D:HL-DT-ST DVD-RAM GSA-H20N Revision:1.02
14.02.2015 07:32:32.199: Adapter=3 ID=0 LUN=16 E:ASUS BW-12B1LT Revision:1.03
14.02.2015 07:32:32.199: BurnSupport: 2 record device(s) available
14.02.2015 07:32:32.200: BurnSupport: D: HL-DT-ST DVD-RAM GSA-H20N Rev. 1.02
14.02.2015 07:32:32.200: BurnSupport: E: ASUS BW-12B1LT Rev. 1.03
14.02.2015 07:32:32.200: ------------ done ----------------
-------------------------- 11.03.2015 18:45:23 --------------------------
11.03.2015 18:45:23.872: DLLAV32.DLL loaded, all entry points available
11.03.2015 18:45:23.924: AVSDK MsgCbFunc registered
11.03.2015 18:45:23.924: AVSDK: StatCbFunc registered
11.03.2015 18:45:24.218: AVSDK Version 11.0.238
11.03.2015 18:45:24.256: ------------ Reading Device Info ----------------
11.03.2015 18:45:24.257: AVSDK: 2 device(s) found
11.03.2015 18:45:24.257: BurnSupport: 2 device(s) found
11.03.2015 18:45:24.257: Adapter=0 ID=0 LUN=0 D:HL-DT-ST DVD-RAM GSA-H20N Revision:1.02
11.03.2015 18:45:24.298: Adapter=3 ID=0 LUN=16 E:ASUS BW-12B1LT Revision:1.03
11.03.2015 18:45:24.299: BurnSupport: 2 record device(s) available
11.03.2015 18:45:24.299: BurnSupport: D: HL-DT-ST DVD-RAM GSA-H20N Rev. 1.02
11.03.2015 18:45:24.300: BurnSupport: E: ASUS BW-12B1LT Rev. 1.03
11.03.2015 18:45:24.300: ------------ done ----------------
11.03.2015 18:45:24.681: setting no speed limit
11.03.2015 18:45:24.682: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
11.03.2015 18:45:24.777: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/00)
11.03.2015 18:45:24.777: !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
11.03.2015 18:45:24.777: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
11.03.2015 18:45:42.461: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/02)
11.03.2015 18:45:42.462: !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
11.03.2015 18:45:42.462: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
11.03.2015 18:45:46.132: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/02)
11.03.2015 18:45:46.133: !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
11.03.2015 18:45:46.133: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
11.03.2015 18:49:25.705: AVSDK Message - ERROR: :Cannot open drive -> error code 14
11.03.2015 18:49:25.706: !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 3 - bad address given as parameter !!!
11.03.2015 18:49:25.707: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 202 - bad address given as parameter !!!
11.03.2015 18:49:45.842: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
11.03.2015 18:49:52.077: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
11.03.2015 18:49:52.078: DEVICE REMOVAL
11.03.2015 18:50:21.424: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
11.03.2015 18:50:45.077: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
11.03.2015 18:50:45.078: DEVICE REMOVAL
11.03.2015 18:51:42.681: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
11.03.2015 18:53:56.048: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
11.03.2015 18:54:01.036: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
11.03.2015 18:54:01.073: Open Project: Wintersport_2006_-_2014_BAK4_BAK6 -- bd project 2015-03-11
11.03.2015 18:54:01.073: VideoMode: PAL Temp Dir: J:\MAGIX\
11.03.2015 18:54:01.074: dll version 5.0.10.0
11.03.2015 18:54:01.422: Step 1 of 11, Encodiere Film 1 ...
11.03.2015 20:02:10.154: Step 1 done
11.03.2015 20:02:10.191: Step 2 of 11, Encodiere Film 2 ...
12.03.2015 00:03:33.619: Step 2 done
12.03.2015 00:03:33.740: ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
12.03.2015 00:03:33.904: !!! DBK error in BurnProject: 10 - movie encoding failed !!!
-------------------------- 12.03.2015 18:56:25 --------------------------
12.03.2015 18:56:25.235: DLLAV32.DLL loaded, all entry points available
12.03.2015 18:56:25.512: AVSDK MsgCbFunc registered
12.03.2015 18:56:25.513: AVSDK: StatCbFunc registered
12.03.2015 18:56:26.314: AVSDK Version 11.0.238
12.03.2015 18:56:26.343: ------------ Reading Device Info ----------------
12.03.2015 18:56:26.370: AVSDK: 2 device(s) found
12.03.2015 18:56:26.371: BurnSupport: 2 device(s) found
12.03.2015 18:56:26.372: Adapter=0 ID=0 LUN=0 D:HL-DT-ST DVD-RAM GSA-H20N Revision:1.02
12.03.2015 18:56:26.859: Adapter=3 ID=0 LUN=16 E:ASUS BW-12B1LT Revision:1.03
12.03.2015 18:56:26.860: BurnSupport: 2 record device(s) available
12.03.2015 18:56:26.861: BurnSupport: D: HL-DT-ST DVD-RAM GSA-H20N Rev. 1.02
12.03.2015 18:56:26.861: BurnSupport: E: ASUS BW-12B1LT Rev. 1.03
12.03.2015 18:56:26.862: ------------ done ----------------
12.03.2015 18:56:28.337: setting no speed limit
12.03.2015 18:56:28.383: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
12.03.2015 18:56:31.005: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
12.03.2015 18:56:31.795: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolAddSessionSub(): 204 - illegal log. or phys. disc format !!!
12.03.2015 18:56:40.339: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
12.03.2015 18:56:40.554: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolAddSessionSub(): 204 - illegal log. or phys. disc format !!!
12.03.2015 18:59:09.353: Open Project: Wintersport_2007_-_2014_BAK4_BAK6 -- bd project 2015-03-12
12.03.2015 18:59:09.353: VideoMode: PAL Temp Dir: J:\MAGIX\
12.03.2015 18:59:09.354: dll version 5.0.10.0
12.03.2015 18:59:09.436: Step 1 of 10, Encodiere Film 1 ...
12.03.2015 21:50:36.752: Step 1 done
12.03.2015 21:50:36.788: Step 2 of 10, Encodiere Film 2 ...
13.03.2015 04:52:09.997: Step 2 done
13.03.2015 04:52:10.193: ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
13.03.2015 04:52:10.244: !!! DBK error in BurnProject: 10 - movie encoding failed !!!
-------------------------- 14.03.2015 05:47:42 --------------------------
14.03.2015 05:47:42.201: DLLAV32.DLL loaded, all entry points available
14.03.2015 05:47:42.261: AVSDK MsgCbFunc registered
14.03.2015 05:47:42.261: AVSDK: StatCbFunc registered
14.03.2015 05:47:42.445: AVSDK Version 11.0.238
14.03.2015 05:47:42.451: ------------ Reading Device Info ----------------
14.03.2015 05:47:42.451: AVSDK: 2 device(s) found
14.03.2015 05:47:42.452: BurnSupport: 2 device(s) found
14.03.2015 05:47:42.452: Adapter=0 ID=0 LUN=0 D:HL-DT-ST DVD-RAM GSA-H20N Revision:1.02
14.03.2015 05:47:42.460: Adapter=3 ID=0 LUN=16 E:ASUS BW-12B1LT Revision:1.03
14.03.2015 05:47:42.460: BurnSupport: 2 record device(s) available
14.03.2015 05:47:42.460: BurnSupport: D: HL-DT-ST DVD-RAM GSA-H20N Rev. 1.02
14.03.2015 05:47:42.461: BurnSupport: E: ASUS BW-12B1LT Rev. 1.03
14.03.2015 05:47:42.461: ------------ done ----------------
14.03.2015 05:47:42.994: setting no speed limit
14.03.2015 05:47:42.996: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
14.03.2015 05:47:45.456: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
14.03.2015 05:47:45.791: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolAddSessionSub(): 204 - illegal log. or phys. disc format !!!
14.03.2015 05:49:03.508: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
14.03.2015 05:49:03.807: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolAddSessionSub(): 204 - illegal log. or phys. disc format !!!
14.03.2015 05:49:13.175: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
14.03.2015 05:49:13.388: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolAddSessionSub(): 204 - illegal log. or phys. disc format !!!
14.03.2015 05:49:15.673: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
14.03.2015 05:49:15.899: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolAddSessionSub(): 204 - illegal log. or phys. disc format !!!
14.03.2015 05:49:15.917: Open Project: Wintersport_2007_-_2014_BAK4_BAK6 -- bd project 2015-03-14
14.03.2015 05:49:15.918: VideoMode: PAL Temp Dir: J:\MAGIX\
14.03.2015 05:49:15.918: dll version 5.0.10.0
14.03.2015 05:49:16.057: Step 1 of 11, Encodiere Film 1 ...
14.03.2015 08:38:37.236: Step 1 done
14.03.2015 08:38:37.279: Step 2 of 11, Encodiere Film 2 ...
14.03.2015 15:38:41.083: Step 2 done
14.03.2015 15:38:41.217: ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
14.03.2015 15:38:41.288: !!! DBK error in BurnProject: 10 - movie encoding failed !!!
-------------------------- 18.03.2015 05:11:33 --------------------------
18.03.2015 05:11:33.610: DLLAV32.DLL loaded, all entry points available
18.03.2015 05:11:33.666: AVSDK MsgCbFunc registered
18.03.2015 05:11:33.667: AVSDK: StatCbFunc registered
18.03.2015 05:11:33.821: AVSDK Version 11.0.238
18.03.2015 05:11:33.822: ------------ Reading Device Info ----------------
18.03.2015 05:11:33.822: AVSDK: 2 device(s) found
18.03.2015 05:11:33.822: BurnSupport: 2 device(s) found
18.03.2015 05:11:33.823: Adapter=0 ID=0 LUN=0 D:HL-DT-ST DVD-RAM GSA-H20N Revision:1.02
18.03.2015 05:11:33.823: Adapter=3 ID=0 LUN=16 E:ASUS BW-12B1LT Revision:1.03
18.03.2015 05:11:33.824: BurnSupport: 2 record device(s) available
18.03.2015 05:11:33.824: BurnSupport: D: HL-DT-ST DVD-RAM GSA-H20N Rev. 1.02
18.03.2015 05:11:33.824: BurnSupport: E: ASUS BW-12B1LT Rev. 1.03
18.03.2015 05:11:33.825: ------------ done ----------------
18.03.2015 05:11:34.136: setting no speed limit
18.03.2015 05:11:34.138: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
18.03.2015 05:11:34.203: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
18.03.2015 05:11:34.204: !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
18.03.2015 05:11:34.204: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
18.03.2015 05:11:50.151: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
18.03.2015 05:11:50.152: !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
18.03.2015 05:11:50.152: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
18.03.2015 05:12:42.227: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
18.03.2015 05:12:42.228: DEVICE ARRIVED
18.03.2015 05:12:46.550: AVSDK Message - ERROR: :Cannot open drive -> error code 14
18.03.2015 05:12:46.551: !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 3 - bad address given as parameter !!!
18.03.2015 05:12:46.552: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 202 - bad address given as parameter !!!
18.03.2015 05:13:03.198: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
18.03.2015 05:13:03.457: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolAddSessionSub(): 204 - illegal log. or phys. disc format !!!
18.03.2015 05:30:30.300: setting no speed limit
18.03.2015 05:30:32.538: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
18.03.2015 05:30:32.874: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolAddSessionSub(): 204 - illegal log. or phys. disc format !!!
18.03.2015 05:30:39.612: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
18.03.2015 05:30:39.849: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolAddSessionSub(): 204 - illegal log. or phys. disc format !!!
18.03.2015 05:31:02.550: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
18.03.2015 05:31:02.885: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolAddSessionSub(): 204 - illegal log. or phys. disc format !!!
18.03.2015 05:31:03.200: AVSDK Status - Begin operation Erasing disc
18.03.2015 05:31:05.846: AVSDK Status - End operation Erasing disc
18.03.2015 05:31:07.120: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
18.03.2015 05:47:09.389: setting no speed limit
18.03.2015 05:47:12.634: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
18.03.2015 05:47:39.244: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
18.03.2015 05:47:42.282: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
18.03.2015 05:47:42.393: Open Project: Wintersport_2007_-_2014_BAK4_BAK6 -- bd project 2015-03-18
18.03.2015 05:47:42.393: VideoMode: PAL Temp Dir: J:\MAGIX\
18.03.2015 05:47:42.394: dll version 5.0.10.0
18.03.2015 05:48:00.610: Step 1 of 11, Encodiere Film 1 ...
18.03.2015 08:37:38.979: Step 1 done
18.03.2015 08:37:38.997: Step 2 of 11, Encodiere Film 2 ...
18.03.2015 15:40:58.662: Step 2 done
18.03.2015 15:40:58.726: ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
18.03.2015 15:40:58.757: !!! DBK error in BurnProject: 10 - movie encoding failed !!!
Fehler im Film2, wie zu sehen ist.
Wenn bei Euch Video Deluxe 2015 beim Codieren des Films nach MPEG2 (entweder direkt als MPEG2 Datei oder als DVD) abbricht mit Errno 5 und DBK Error 10, dann schaut mal welchen Codec ihr benutzt. Video Deluxe 2015 hat seit dieser Version einen neuen Codec, der standardmäßig verwendet wird. Allerdings scheint mir der buggy zu sein.
Der Magix Support hat mich darauf hingewiesen, dass man den Codec wechseln kann. Die Einstellung sieht man nur, wenn man den Codec schon heruntergeladen und aktiviert hat.
Codec wechseln:
Programm starten und Taste "Y" drücken (Alternativ "Datei" / "Einstellungen" / "Programm..."
Im Reiter "Sonstiges" kann man den Codec für MPEG2 und MPEG4 separat auswählen (entweder Standard oder MainConcept)
Es reicht, wenn man MPEG2 auf Mainconcept umstellt. Der MPEG4 Export hat bei mir problemlos funktioniert.
Sollte diese Einstellung in der Maske nicht angezeigt werden, dann muss zuvor der Codec heruntergeladen werden.
Codec herunterladen:
"Hilfe" - "Zusatzprogramme installieren" - "MainConcept MPEG-2/4 Codec"
Nach erfolgreichem herunterladen muss das Programm neu gestartet werden. Nach Änderung des Codecs in den Einstellungen muss das Programm auch neu gestartet werden.
Mit dem MainConcept-Codec trat bei mir dieser Fehler nicht mehr auf.
Für diesen Hinweis möchte ich explizit noch einmal einen Riesendank an den Magix-Support schicken, der extrem schnell geantwortet hat (innerhalb weniger Minuten). Ich habe diesen vermeintlichen Fehler im Standard-Codec via Support an die Softwareabteilung weitergeben lassen.